Commit f78dd2c2 authored by Shawn Guo's avatar Shawn Guo Committed by Shawn Guo

dt-bindings: add bindings doc for ZTE VOU display controller

It adds initial bindings doc for ZTE VOU display controller.  HDMI is
the only supported output device right now.
Signed-off-by: default avatarShawn Guo <shawn.guo@linaro.org>
Acked-by: default avatarRob Herring <robh@kernel.org>
parent 1001354c
ZTE VOU Display Controller
This is a display controller found on ZTE ZX296718 SoC. It includes multiple
Graphic Layer (GL) and Video Layer (VL), two Mixers/Channels, and a few blocks
handling scaling, color space conversion etc. VOU also integrates the support
for typical output devices, like HDMI, TV Encoder, VGA, and RGB LCD.
* Master VOU node
It must be the parent node of all the sub-device nodes.
Required properties:
- compatible: should be "zte,zx296718-vou"
- #address-cells: should be <1>
- #size-cells: should be <1>
- ranges: list of address translations between VOU and sub-devices
* VOU DPC device
Required properties:
- compatible: should be "zte,zx296718-dpc"
- reg: Physical base address and length of DPC register regions, one for each
entry in 'reg-names'
- reg-names: The names of register regions. The following regions are required:
"osd"
"timing_ctrl"
"dtrc"
"vou_ctrl"
"otfppu"
- interrupts: VOU DPC interrupt number to CPU
- clocks: A list of phandle + clock-specifier pairs, one for each entry
in 'clock-names'
- clock-names: A list of clock names. The following clocks are required:
"aclk"
"ppu_wclk"
"main_wclk"
"aux_wclk"
* HDMI output device
Required properties:
- compatible: should be "zte,zx296718-hdmi"
- reg: Physical base address and length of the HDMI device IO region
- interrupts : HDMI interrupt number to CPU
- clocks: A list of phandle + clock-specifier pairs, one for each entry
in 'clock-names'
- clock-names: A list of clock names. The following clocks are required:
"osc_cec"
"osc_clk"
"xclk"
Example:
vou: vou@1440000 {
compatible = "zte,zx296718-vou";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x1440000 0x10000>;
dpc: dpc@0 {
compatible = "zte,zx296718-dpc";
reg = <0x0000 0x1000>, <0x1000 0x1000>,
<0x5000 0x1000>, <0x6000 0x1000>,
<0xa000 0x1000>;
reg-names = "osd", "timing_ctrl",
"dtrc", "vou_ctrl",
"otfppu";
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&topcrm VOU_ACLK>, <&topcrm VOU_PPU_WCLK>,
<&topcrm VOU_MAIN_WCLK>, <&topcrm VOU_AUX_WCLK>;
clock-names = "aclk", "ppu_wclk",
"main_wclk", "aux_wclk";
};
hdmi: hdmi@c000 {
compatible = "zte,zx296718-hdmi";
reg = <0xc000 0x4000>;
interrupts = <GIC_SPI 82 IRQ_TYPE_EDGE_RISING>;
clocks = <&topcrm HDMI_OSC_CEC>,
<&topcrm HDMI_OSC_CLK>,
<&topcrm HDMI_XCLK>;
clock-names = "osc_cec", "osc_clk", "xclk";
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment