Commit f7a388d6 authored by Linus Walleij's avatar Linus Walleij Committed by Sebastian Reichel

power: reset: Add a driver for the Gemini poweroff

The Gemini (SL3516) SoC has a special power controller block
that only deal with shutting down the system.

If you do not register a driver and activate the block, the
power button on the systems utilizing this SoC will do an
uncontrolled power cut, which is why it is important to have
a special poweroff driver.

The most basic functionality is to just shut down the system
by writing a special bit in the control register after the
system has reached pm_poweroff.

It also handles the poweroff from a button or other sources:

When the poweroff button is pressed, or a signal is sent to
poweroff from an infrared remote control, or when the RTC
fires a special alarm (!) the system emits an interrupt.
At this point, Linux must acknowledge the interrupt and
proceed to do an orderly shutdown of the system.

After adding this driver, pressing the poweroff button gives
this dmesg:

root@gemini:/
root@gemini:/ gemini-poweroff 4b000000.power-controller:
poweroff button pressed

calling shutdown scripts..
setting /dev/rtc0 from system time
unmounting file systems...
umount: tmpfs busy - remounted read-only
umount: can't unmount /: Invalid argument
The system is going down NOW!
Sent SIGTERM to all processes
Sent SIGKILL to all processes
Requesting system poweroff
uhci_hcd 0000:00:09.1: HCRESET not completed yet!
uhci_hcd 0000:00:09.0: HCRESET not completed yet!
reboot: Power down
gemini-poweroff 4b000000.power-controller: Gemini power off

Cc: Janos Laube <janos.dev@gmail.com>
Cc: Paulius Zaleckas <paulius.zaleckas@gmail.com>
Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: linux-pm@vger.kernel.org
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: default avatarSebastian Reichel <sre@kernel.org>
parent ba443b5a
...@@ -67,6 +67,15 @@ config POWER_RESET_BRCMSTB ...@@ -67,6 +67,15 @@ config POWER_RESET_BRCMSTB
Say Y here if you have a Broadcom STB board and you wish Say Y here if you have a Broadcom STB board and you wish
to have restart support. to have restart support.
config POWER_RESET_GEMINI_POWEROFF
bool "Cortina Gemini power-off driver"
depends on ARCH_GEMINI || COMPILE_TEST
depends on OF && HAS_IOMEM
default ARCH_GEMINI
help
This driver supports turning off the Cortina Gemini SoC.
Select this if you're building a kernel with Gemini SoC support.
config POWER_RESET_GPIO config POWER_RESET_GPIO
bool "GPIO power-off driver" bool "GPIO power-off driver"
depends on OF_GPIO depends on OF_GPIO
......
...@@ -5,6 +5,7 @@ obj-$(CONFIG_POWER_RESET_AT91_SAMA5D2_SHDWC) += at91-sama5d2_shdwc.o ...@@ -5,6 +5,7 @@ obj-$(CONFIG_POWER_RESET_AT91_SAMA5D2_SHDWC) += at91-sama5d2_shdwc.o
obj-$(CONFIG_POWER_RESET_AXXIA) += axxia-reset.o obj-$(CONFIG_POWER_RESET_AXXIA) += axxia-reset.o
obj-$(CONFIG_POWER_RESET_BRCMKONA) += brcm-kona-reset.o obj-$(CONFIG_POWER_RESET_BRCMKONA) += brcm-kona-reset.o
obj-$(CONFIG_POWER_RESET_BRCMSTB) += brcmstb-reboot.o obj-$(CONFIG_POWER_RESET_BRCMSTB) += brcmstb-reboot.o
obj-$(CONFIG_POWER_RESET_GEMINI_POWEROFF) += gemini-poweroff.o
obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o
obj-$(CONFIG_POWER_RESET_GPIO_RESTART) += gpio-restart.o obj-$(CONFIG_POWER_RESET_GPIO_RESTART) += gpio-restart.o
obj-$(CONFIG_POWER_RESET_HISI) += hisi-reboot.o obj-$(CONFIG_POWER_RESET_HISI) += hisi-reboot.o
......
/*
* Gemini power management controller
* Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
*
* Inspired by code from the SL3516 board support by Jason Lee
* Inspired by code from Janos Laube <janos.dev@gmail.com>
*/
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <linux/pm.h>
#include <linux/bitops.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/reboot.h>
#define GEMINI_PWC_ID 0x00010500
#define GEMINI_PWC_IDREG 0x00
#define GEMINI_PWC_CTRLREG 0x04
#define GEMINI_PWC_STATREG 0x08
#define GEMINI_CTRL_SHUTDOWN BIT(0)
#define GEMINI_CTRL_ENABLE BIT(1)
#define GEMINI_CTRL_IRQ_CLR BIT(2)
#define GEMINI_STAT_CIR BIT(4)
#define GEMINI_STAT_RTC BIT(5)
#define GEMINI_STAT_POWERBUTTON BIT(6)
struct gemini_powercon {
struct device *dev;
void __iomem *base;
};
static irqreturn_t gemini_powerbutton_interrupt(int irq, void *data)
{
struct gemini_powercon *gpw = data;
u32 val;
/* ACK the IRQ */
val = readl(gpw->base + GEMINI_PWC_CTRLREG);
val |= GEMINI_CTRL_IRQ_CLR;
writel(val, gpw->base + GEMINI_PWC_CTRLREG);
val = readl(gpw->base + GEMINI_PWC_STATREG);
val &= 0x70U;
switch (val) {
case GEMINI_STAT_CIR:
dev_info(gpw->dev, "infrared poweroff\n");
orderly_poweroff(true);
break;
case GEMINI_STAT_RTC:
dev_info(gpw->dev, "RTC poweroff\n");
orderly_poweroff(true);
break;
case GEMINI_STAT_POWERBUTTON:
dev_info(gpw->dev, "poweroff button pressed\n");
orderly_poweroff(true);
break;
default:
dev_info(gpw->dev, "other power management IRQ\n");
break;
}
return IRQ_HANDLED;
}
/* This callback needs this static local as it has void as argument */
static struct gemini_powercon *gpw_poweroff;
static void gemini_poweroff(void)
{
struct gemini_powercon *gpw = gpw_poweroff;
u32 val;
dev_crit(gpw->dev, "Gemini power off\n");
val = readl(gpw->base + GEMINI_PWC_CTRLREG);
val |= GEMINI_CTRL_ENABLE | GEMINI_CTRL_IRQ_CLR;
writel(val, gpw->base + GEMINI_PWC_CTRLREG);
val &= ~GEMINI_CTRL_ENABLE;
val |= GEMINI_CTRL_SHUTDOWN;
writel(val, gpw->base + GEMINI_PWC_CTRLREG);
}
static int gemini_poweroff_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct resource *res;
struct gemini_powercon *gpw;
u32 val;
int irq;
int ret;
gpw = devm_kzalloc(dev, sizeof(*gpw), GFP_KERNEL);
if (!gpw)
return -ENOMEM;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
gpw->base = devm_ioremap_resource(dev, res);
if (IS_ERR(gpw->base))
return PTR_ERR(gpw->base);
irq = platform_get_irq(pdev, 0);
if (!irq)
return -EINVAL;
gpw->dev = dev;
val = readl(gpw->base + GEMINI_PWC_IDREG);
val &= 0xFFFFFF00U;
if (val != GEMINI_PWC_ID) {
dev_err(dev, "wrong power controller ID: %08x\n",
val);
return -ENODEV;
}
/* Clear the power management IRQ */
val = readl(gpw->base + GEMINI_PWC_CTRLREG);
val |= GEMINI_CTRL_IRQ_CLR;
writel(val, gpw->base + GEMINI_PWC_CTRLREG);
ret = devm_request_irq(dev, irq, gemini_powerbutton_interrupt, 0,
"poweroff", gpw);
if (ret)
return ret;
pm_power_off = gemini_poweroff;
gpw_poweroff = gpw;
/*
* Enable the power controller. This is crucial on Gemini
* systems: if this is not done, pressing the power button
* will result in unconditional poweroff without any warning.
* This makes the kernel handle the poweroff.
*/
val = readl(gpw->base + GEMINI_PWC_CTRLREG);
val |= GEMINI_CTRL_ENABLE;
writel(val, gpw->base + GEMINI_PWC_CTRLREG);
dev_info(dev, "Gemini poweroff driver registered\n");
return 0;
}
static const struct of_device_id gemini_poweroff_of_match[] = {
{
.compatible = "cortina,gemini-power-controller",
},
{}
};
static struct platform_driver gemini_poweroff_driver = {
.probe = gemini_poweroff_probe,
.driver = {
.name = "gemini-poweroff",
.of_match_table = gemini_poweroff_of_match,
},
};
builtin_platform_driver(gemini_poweroff_driver);
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment