ARM: S3C64XX: Move core support to mach-s3c64xx

Move the core S3C64XX support to mach-s3c64xx as it is unlikely to be used
outside of this directory. Also move the SoC header files in with it.

This includes the clock, cpu, cpufreq, dma, gpiolib and pll support.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

arch/arm/mach-s3c64xx/Kconfig

@@ -19,6 +19,10 @@ config CPU_S3C6410
 	help
 	  Enable S3C6410 CPU support
 
+config S3C64XX_DMA
+	bool "S3C64XX DMA"
+	select S3C_DMA
+
 config S3C64XX_SETUP_SDHCI
 	select S3C64XX_SETUP_SDHCI_GPIO
 	bool

arch/arm/mach-s3c64xx/Makefile

@@ -10,6 +10,11 @@ obj-m				:=
 obj-n				:=
 obj-				:=
 
+# Core files
+obj-y				+= cpu.o
+obj-y				+= clock.o
+obj-y				+= gpiolib.o
+
 # Core support for S3C6400 system
 
 obj-$(CONFIG_CPU_S3C6400)	+= s3c6400.o
@@ -18,6 +23,14 @@ obj-$(CONFIG_CPU_S3C6410)	+= s3c6410.o
 obj-y				+= irq.o
 obj-y				+= irq-eint.o
 
+# CPU frequency scaling
+
+obj-$(CONFIG_CPU_FREQ_S3C64XX)  += cpufreq.o
+
+# DMA support
+
+obj-$(CONFIG_S3C64XX_DMA)	+= dma.o
+
 # Device setup
 
 obj-$(CONFIG_S3C64XX_SETUP_I2C0) += setup-i2c0.o
@@ -28,6 +41,8 @@ obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
 
 # PM
 
+obj-$(CONFIG_PM)		+= pm.o
+obj-$(CONFIG_PM)		+= sleep.o
 obj-$(CONFIG_PM)		+= irq-pm.o
 
 # Machine support

arch/arm/plat-s3c64xx/clock.c → arch/arm/mach-s3c64xx/clock.c

@@ -23,6 +23,8 @@
 
 #include <mach/regs-sys.h>
 #include <mach/regs-clock.h>
+#include <mach/pll.h>
+
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/clock.h>

arch/arm/plat-s3c64xx/cpu.c → arch/arm/mach-s3c64xx/cpu.c

@@ -33,8 +33,8 @@
 #include <plat/devs.h>
 #include <plat/clock.h>
 
-#include <plat/s3c6400.h>
-#include <plat/s3c6410.h>
+#include <mach/s3c6400.h>
+#include <mach/s3c6410.h>
 
 /* table of supported CPUs */
 

arch/arm/plat-s3c64xx/include/plat/s3c6400.h → arch/arm/mach-s3c64xx/include/mach/s3c6400.h

-/* arch/arm/plat-s3c64xx/include/plat/s3c6400.h
+/* arch/arm/mach-s3c64xx/include/macht/s3c6400.h
  *
  * Copyright 2008 Openmoko, Inc.
  * Copyright 2008 Simtec Electronics
@@ -33,4 +33,3 @@ extern void s3c6400_init_clocks(int xtal);
 #define s3c6400_map_io NULL
 #define s3c6400_init NULL
 #endif
-

arch/arm/plat-s3c64xx/include/plat/s3c6410.h → arch/arm/mach-s3c64xx/include/mach/s3c6410.h

-/* arch/arm/plat-s3c64xx/include/plat/s3c6410.h
+/* arch/arm/mach-s3c64xx/include/mach/s3c6410.h
  *
  * Copyright 2008 Openmoko,  Inc.
  * Copyright 2008 Simtec Electronics

arch/arm/mach-s3c64xx/mach-anw6410.c

@@ -45,7 +45,7 @@
 #include <plat/iic.h>
 #include <plat/fb.h>
 
-#include <plat/s3c6410.h>
+#include <mach/s3c6410.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>

arch/arm/mach-s3c64xx/mach-hmt.c

@@ -38,7 +38,7 @@
 #include <plat/fb.h>
 #include <plat/nand.h>
 
-#include <plat/s3c6410.h>
+#include <mach/s3c6410.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>

arch/arm/mach-s3c64xx/mach-ncp.c

@@ -40,7 +40,7 @@
 #include <plat/iic.h>
 #include <plat/fb.h>
 
-#include <plat/s3c6410.h>
+#include <mach/s3c6410.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>

arch/arm/mach-s3c64xx/mach-smdk6400.c

@@ -31,7 +31,7 @@
 
 #include <plat/regs-serial.h>
 
-#include <plat/s3c6400.h>
+#include <mach/s3c6400.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>

arch/arm/mach-s3c64xx/mach-smdk6410.c

@@ -54,7 +54,7 @@
 #include <plat/fb.h>
 #include <plat/gpio-cfg.h>
 
-#include <plat/s3c6410.h>
+#include <mach/s3c6410.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>

arch/arm/mach-s3c64xx/s3c6400.c

@@ -37,7 +37,7 @@
 #include <plat/clock.h>
 #include <plat/sdhci.h>
 #include <plat/iic-core.h>
-#include <plat/s3c6400.h>
+#include <mach/s3c6400.h>
 
 void __init s3c6400_map_io(void)
 {

arch/arm/mach-s3c64xx/s3c6410.c

@@ -38,8 +38,8 @@
 #include <plat/clock.h>
 #include <plat/sdhci.h>
 #include <plat/iic-core.h>
-#include <plat/s3c6400.h>
-#include <plat/s3c6410.h>
+#include <mach/s3c6400.h>
+#include <mach/s3c6410.h>
 
 void __init s3c6410_map_io(void)
 {

arch/arm/plat-s3c64xx/Kconfig

@@ -42,8 +42,4 @@ config CPU_S3C6400_CLOCK
 	  Common clock support code for the S3C6400 that is shared
 	  by other CPUs in the series, such as the S3C6410.
 
-config S3C64XX_DMA
-	bool "S3C64XX DMA"
-	select S3C_DMA
-
 endif

arch/arm/plat-s3c64xx/Makefile

@@ -10,23 +10,7 @@ obj-m				:=
 obj-n				:= dummy.o
 obj-				:=
 
-# Core files
-obj-y				+= cpu.o
-obj-y				+= clock.o
-obj-y				+= gpiolib.o
-
 # CPU support
 
 obj-$(CONFIG_CPU_S3C6400_INIT)	+= s3c6400-init.o
 obj-$(CONFIG_CPU_S3C6400_CLOCK)	+= s3c6400-clock.o
-obj-$(CONFIG_CPU_FREQ_S3C64XX)  += cpufreq.o
-
-# PM support
-
-obj-$(CONFIG_PM)		+= pm.o
-obj-$(CONFIG_PM)		+= sleep.o
-
-# DMA support
-
-obj-$(CONFIG_S3C64XX_DMA)	+= dma.o
-

arch/arm/plat-s3c64xx/s3c6400-init.c

@@ -18,8 +18,8 @@
 
 #include <plat/cpu.h>
 #include <plat/devs.h>
-#include <plat/s3c6400.h>
-#include <plat/s3c6410.h>
+#include <mach/s3c6400.h>
+#include <mach/s3c6410.h>
 
 /* uart registration process */