Commit f7be9aba authored by Ben Dooks's avatar Ben Dooks

ARM: S3C64XX: Move core support to mach-s3c64xx

Move the core S3C64XX support to mach-s3c64xx as it is unlikely to be used
outside of this directory. Also move the SoC header files in with it.

This includes the clock, cpu, cpufreq, dma, gpiolib and pll support.
Signed-off-by: default avatarBen Dooks <ben-linux@fluff.org>
parent 88fc68a2
......@@ -19,6 +19,10 @@ config CPU_S3C6410
help
Enable S3C6410 CPU support
config S3C64XX_DMA
bool "S3C64XX DMA"
select S3C_DMA
config S3C64XX_SETUP_SDHCI
select S3C64XX_SETUP_SDHCI_GPIO
bool
......
......@@ -10,6 +10,11 @@ obj-m :=
obj-n :=
obj- :=
# Core files
obj-y += cpu.o
obj-y += clock.o
obj-y += gpiolib.o
# Core support for S3C6400 system
obj-$(CONFIG_CPU_S3C6400) += s3c6400.o
......@@ -18,6 +23,14 @@ obj-$(CONFIG_CPU_S3C6410) += s3c6410.o
obj-y += irq.o
obj-y += irq-eint.o
# CPU frequency scaling
obj-$(CONFIG_CPU_FREQ_S3C64XX) += cpufreq.o
# DMA support
obj-$(CONFIG_S3C64XX_DMA) += dma.o
# Device setup
obj-$(CONFIG_S3C64XX_SETUP_I2C0) += setup-i2c0.o
......@@ -28,6 +41,8 @@ obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
# PM
obj-$(CONFIG_PM) += pm.o
obj-$(CONFIG_PM) += sleep.o
obj-$(CONFIG_PM) += irq-pm.o
# Machine support
......
......@@ -23,6 +23,8 @@
#include <mach/regs-sys.h>
#include <mach/regs-clock.h>
#include <mach/pll.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/clock.h>
......
......@@ -33,8 +33,8 @@
#include <plat/devs.h>
#include <plat/clock.h>
#include <plat/s3c6400.h>
#include <plat/s3c6410.h>
#include <mach/s3c6400.h>
#include <mach/s3c6410.h>
/* table of supported CPUs */
......
/* arch/arm/plat-s3c64xx/include/plat/s3c6400.h
/* arch/arm/mach-s3c64xx/include/macht/s3c6400.h
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
......@@ -33,4 +33,3 @@ extern void s3c6400_init_clocks(int xtal);
#define s3c6400_map_io NULL
#define s3c6400_init NULL
#endif
/* arch/arm/plat-s3c64xx/include/plat/s3c6410.h
/* arch/arm/mach-s3c64xx/include/mach/s3c6410.h
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
......
......@@ -45,7 +45,7 @@
#include <plat/iic.h>
#include <plat/fb.h>
#include <plat/s3c6410.h>
#include <mach/s3c6410.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
......
......@@ -38,7 +38,7 @@
#include <plat/fb.h>
#include <plat/nand.h>
#include <plat/s3c6410.h>
#include <mach/s3c6410.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
......
......@@ -40,7 +40,7 @@
#include <plat/iic.h>
#include <plat/fb.h>
#include <plat/s3c6410.h>
#include <mach/s3c6410.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
......
......@@ -31,7 +31,7 @@
#include <plat/regs-serial.h>
#include <plat/s3c6400.h>
#include <mach/s3c6400.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
......
......@@ -54,7 +54,7 @@
#include <plat/fb.h>
#include <plat/gpio-cfg.h>
#include <plat/s3c6410.h>
#include <mach/s3c6410.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
......
......@@ -37,7 +37,7 @@
#include <plat/clock.h>
#include <plat/sdhci.h>
#include <plat/iic-core.h>
#include <plat/s3c6400.h>
#include <mach/s3c6400.h>
void __init s3c6400_map_io(void)
{
......
......@@ -38,8 +38,8 @@
#include <plat/clock.h>
#include <plat/sdhci.h>
#include <plat/iic-core.h>
#include <plat/s3c6400.h>
#include <plat/s3c6410.h>
#include <mach/s3c6400.h>
#include <mach/s3c6410.h>
void __init s3c6410_map_io(void)
{
......
......@@ -42,8 +42,4 @@ config CPU_S3C6400_CLOCK
Common clock support code for the S3C6400 that is shared
by other CPUs in the series, such as the S3C6410.
config S3C64XX_DMA
bool "S3C64XX DMA"
select S3C_DMA
endif
......@@ -10,23 +10,7 @@ obj-m :=
obj-n := dummy.o
obj- :=
# Core files
obj-y += cpu.o
obj-y += clock.o
obj-y += gpiolib.o
# CPU support
obj-$(CONFIG_CPU_S3C6400_INIT) += s3c6400-init.o
obj-$(CONFIG_CPU_S3C6400_CLOCK) += s3c6400-clock.o
obj-$(CONFIG_CPU_FREQ_S3C64XX) += cpufreq.o
# PM support
obj-$(CONFIG_PM) += pm.o
obj-$(CONFIG_PM) += sleep.o
# DMA support
obj-$(CONFIG_S3C64XX_DMA) += dma.o
......@@ -18,8 +18,8 @@
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/s3c6400.h>
#include <plat/s3c6410.h>
#include <mach/s3c6400.h>
#include <mach/s3c6410.h>
/* uart registration process */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment