dmaengine: sirf: enable the driver support new SiRFmarco SoC

The driver supports old up SiRFprimaII SoCs, this patch makes it support
the new SiRFmarco as well.
SiRFmarco, as a SMP SoC, adds new DMA_INT_EN_CLR and DMA_CH_LOOP_CTRL_CLR
registers, to disable IRQ/Channel, we should write 1 to the corresponding
bit in the two CLEAR register.

Tested on SiRFmarco using SPI driver:
    $ /mnt/spidev-sirftest -D /dev/spidev32766.0
    spi mode: 0
    bits per word: 8
    max speed: 500000 Hz (500 KHz)

    00 00 00 00 00 00
    00 00 00 00 00 00
    00 00 00 00 00 00
    00 00 00 00 00 00
    00 00 00 00 00 00
    00 00 00 00 00 00
    00 00 00 00

    $ cat /proc/interrupts
               CPU0       CPU1
     32:       1593          0       GIC  sirfsoc_timer0
     33:          0       3533       GIC  sirfsoc_timer1
     44:          0          0       GIC  sirfsoc_dma
     45:         16          0       GIC  sirfsoc_dma
     47:          6          0       GIC  sirfsoc_spi
     50:       5654          0       GIC  sirfsoc-uart
     ...
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>

drivers/dma/Kconfig

@@ -212,8 +212,8 @@ config TIMB_DMA
 	  Enable support for the Timberdale FPGA DMA engine.
 
 config SIRF_DMA
-	tristate "CSR SiRFprimaII DMA support"
-	depends on ARCH_PRIMA2
+	tristate "CSR SiRFprimaII/SiRFmarco DMA support"
+	depends on ARCH_SIRF
 	select DMA_ENGINE
 	help
 	  Enable support for the CSR SiRFprimaII DMA engine.

drivers/dma/sirf-dma.c

@@ -32,7 +32,9 @@
 #define SIRFSOC_DMA_CH_VALID                    0x140
 #define SIRFSOC_DMA_CH_INT                      0x144
 #define SIRFSOC_DMA_INT_EN                      0x148
+#define SIRFSOC_DMA_INT_EN_CLR			0x14C
 #define SIRFSOC_DMA_CH_LOOP_CTRL                0x150
+#define SIRFSOC_DMA_CH_LOOP_CTRL_CLR            0x15C
 
 #define SIRFSOC_DMA_MODE_CTRL_BIT               4
 #define SIRFSOC_DMA_DIR_CTRL_BIT                5
@@ -76,6 +78,7 @@ struct sirfsoc_dma {
 	struct sirfsoc_dma_chan		channels[SIRFSOC_DMA_CHANNELS];
 	void __iomem			*base;
 	int				irq;
+	bool				is_marco;
 };
 
 #define DRV_NAME	"sirfsoc_dma"
@@ -288,13 +291,19 @@ static int sirfsoc_dma_terminate_all(struct sirfsoc_dma_chan *schan)
 	int cid = schan->chan.chan_id;
 	unsigned long flags;
 
-	writel_relaxed(readl_relaxed(sdma->base + SIRFSOC_DMA_INT_EN) &
-		~(1 << cid), sdma->base + SIRFSOC_DMA_INT_EN);
-	writel_relaxed(1 << cid, sdma->base + SIRFSOC_DMA_CH_VALID);
-
-	writel_relaxed(readl_relaxed(sdma->base + SIRFSOC_DMA_CH_LOOP_CTRL)
-		& ~((1 << cid) | 1 << (cid + 16)),
+	if (!sdma->is_marco) {
+		writel_relaxed(readl_relaxed(sdma->base + SIRFSOC_DMA_INT_EN) &
+			~(1 << cid), sdma->base + SIRFSOC_DMA_INT_EN);
+		writel_relaxed(readl_relaxed(sdma->base + SIRFSOC_DMA_CH_LOOP_CTRL)
+			& ~((1 << cid) | 1 << (cid + 16)),
 			sdma->base + SIRFSOC_DMA_CH_LOOP_CTRL);
+	} else {
+		writel_relaxed(1 << cid, sdma->base + SIRFSOC_DMA_INT_EN_CLR);
+		writel_relaxed((1 << cid) | 1 << (cid + 16),
+			sdma->base + SIRFSOC_DMA_CH_LOOP_CTRL_CLR);
+	}
+
+	writel_relaxed(1 << cid, sdma->base + SIRFSOC_DMA_CH_VALID);
 
 	spin_lock_irqsave(&schan->lock, flags);
 	list_splice_tail_init(&schan->active, &schan->free);
@@ -568,6 +577,9 @@ static int sirfsoc_dma_probe(struct platform_device *op)
 		return -ENOMEM;
 	}
 
+	if (of_device_is_compatible(dn, "sirf,marco-dmac"))
+		sdma->is_marco = true;
+
 	if (of_property_read_u32(dn, "cell-index", &id)) {
 		dev_err(dev, "Fail to get DMAC index\n");
 		return -ENODEV;
@@ -668,6 +680,7 @@ static int __devexit sirfsoc_dma_remove(struct platform_device *op)
 
 static struct of_device_id sirfsoc_dma_match[] = {
 	{ .compatible = "sirf,prima2-dmac", },
+	{ .compatible = "sirf,marco-dmac", },
 	{},
 };