Merge bk://kernel.bkbits.net/gregkh/linux/usb-2.6

into ppc970.osdl.org:/home/torvalds/v2.6/linux

drivers/base/firmware_class.c

@@ -103,7 +103,7 @@ firmware_class_hotplug(struct class_device *class_dev, char **envp,
 			"FIRMWARE=%s", fw_priv->fw_id))
 		return -ENOMEM;
 
-	envp[i++] = NULL;
+	envp[i] = NULL;
 
 	return 0;
 }

drivers/block/ub.c

@@ -36,7 +36,7 @@
 #define DRV_NAME "ub"
 #define DEVFS_NAME DRV_NAME
 
-#define UB_MAJOR 125	/* Stolen from Experimental range for a week - XXX */
+#define UB_MAJOR 180
 
 /*
  * Definitions which have to be scattered once we understand the layout better.
@@ -1535,8 +1535,11 @@ static int ub_bd_revalidate(struct gendisk *disk)
 
 	ub_revalidate(sc);
 	/* This is pretty much a long term P3 */
-	printk(KERN_INFO "%s: device %u capacity nsec %ld bsize %u\n",
-	    sc->name, sc->dev->devnum, sc->capacity.nsec, sc->capacity.bsize);
+	if (!atomic_read(&sc->poison)) {		/* Cover sc->dev */
+		printk(KERN_INFO "%s: device %u capacity nsec %ld bsize %u\n",
+		    sc->name, sc->dev->devnum,
+		    sc->capacity.nsec, sc->capacity.bsize);
+	}
 
 	/* XXX Support sector size switching like in sr.c */
 	blk_queue_hardsect_size(disk->queue, sc->capacity.bsize);

drivers/usb/Makefile

@@ -38,6 +38,7 @@ obj-$(CONFIG_USB_KONICAWC)	+= media/
 obj-$(CONFIG_USB_OV511)		+= media/
 obj-$(CONFIG_USB_PWC)		+= media/
 obj-$(CONFIG_USB_SE401)		+= media/
+obj-$(CONFIG_USB_SN9C102)	+= media/
 obj-$(CONFIG_USB_STV680)	+= media/
 obj-$(CONFIG_USB_VICAM)		+= media/
 obj-$(CONFIG_USB_W9968CF)	+= media/

drivers/usb/core/message.c

@@ -243,14 +243,16 @@ static void sg_complete (struct urb *urb, struct pt_regs *regs)
 		// BUG ();
 	}
 
-	if (urb->status && urb->status != -ECONNRESET) {
+	if (io->status == 0 && urb->status && urb->status != -ECONNRESET) {
 		int		i, found, status;
 
 		io->status = urb->status;
 
 		/* the previous urbs, and this one, completed already.
 		 * unlink pending urbs so they won't rx/tx bad data.
+		 * careful: unlink can sometimes be synchronous...
 		 */
+		spin_unlock (&io->lock);
 		for (i = 0, found = 0; i < io->entries; i++) {
 			if (!io->urbs [i] || !io->urbs [i]->dev)
 				continue;
@@ -263,6 +265,7 @@ static void sg_complete (struct urb *urb, struct pt_regs *regs)
 			} else if (urb == io->urbs [i])
 				found = 1;
 		}
+		spin_lock (&io->lock);
 	}
 	urb->dev = NULL;
 
@@ -524,6 +527,7 @@ void usb_sg_cancel (struct usb_sg_request *io)
 		int	i;
 
 		io->status = -ECONNRESET;
+		spin_unlock (&io->lock);
 		for (i = 0; i < io->entries; i++) {
 			int	retval;
 
@@ -534,6 +538,7 @@ void usb_sg_cancel (struct usb_sg_request *io)
 				dev_warn (&io->dev->dev, "%s, unlink --> %d\n",
 					__FUNCTION__, retval);
 		}
+		spin_lock (&io->lock);
 	}
 	spin_unlock_irqrestore (&io->lock, flags);
 }

drivers/usb/core/urb.c

@@ -451,9 +451,11 @@ int usb_unlink_urb(struct urb *urb)
 		return -EINVAL;
 	if (!(urb->transfer_flags & URB_ASYNC_UNLINK)) {
 #ifdef CONFIG_DEBUG_KERNEL
-		printk(KERN_NOTICE "usb_unlink_urb() is deprecated for "
-			"synchronous unlinks.  Use usb_kill_urb() instead.\n");
-		WARN_ON(1);
+		if (printk_ratelimit()) {
+			printk(KERN_NOTICE "usb_unlink_urb() is deprecated for "
+				"synchronous unlinks.  Use usb_kill_urb() instead.\n");
+			WARN_ON(1);
+		}
 #endif
 		usb_kill_urb(urb);
 		return 0;

drivers/usb/core/usb.c

@@ -656,7 +656,7 @@ static int usb_hotplug (struct device *dev, char **envp, int num_envp,
 			return -ENOMEM;
 	}
 
-	envp[i++] = NULL;
+	envp[i] = NULL;
 
 	return 0;
 }

drivers/usb/core/usb.h

@@ -33,3 +33,18 @@ extern struct usb_driver usbfs_driver;
 extern struct file_operations usbfs_devices_fops;
 extern struct file_operations usbfs_device_file_operations;
 extern void usbfs_conn_disc_event(void);
+
+struct dev_state {
+	struct list_head list;      /* state list */
+	struct usb_device *dev;
+	struct file *file;
+	spinlock_t lock;            /* protects the async urb lists */
+	struct list_head async_pending;
+	struct list_head async_completed;
+	wait_queue_head_t wait;     /* wake up if a request completed */
+	unsigned int discsignr;
+	struct task_struct *disctask;
+	void __user *disccontext;
+	unsigned long ifclaimed;
+};
+

drivers/usb/gadget/ether.c

@@ -223,6 +223,10 @@ MODULE_PARM_DESC(host_addr, "Host Ethernet Address");
 #define	DEV_CONFIG_CDC
 #endif
 
+#ifdef CONFIG_USB_GADGET_LH7A40X
+#define DEV_CONFIG_CDC
+#endif
+
 #ifdef CONFIG_USB_GADGET_MQ11XX
 #define	DEV_CONFIG_CDC
 #endif
@@ -235,6 +239,10 @@ MODULE_PARM_DESC(host_addr, "Host Ethernet Address");
 #define	DEV_CONFIG_CDC
 #endif
 
+#ifdef CONFIG_USB_GADGET_PXA27X
+#define DEV_CONFIG_CDC
+#endif
+
 
 /* For CDC-incapable hardware, choose the simple cdc subset.
  * Anything that talks bulk (without notable bugs) can do this.
@@ -247,10 +255,6 @@ MODULE_PARM_DESC(host_addr, "Host Ethernet Address");
 #define	DEV_CONFIG_SUBSET
 #endif
 
-#ifdef CONFIG_USB_GADGET_LH7A40X
-#define DEV_CONFIG_CDC
-#endif
-
 #ifdef CONFIG_USB_GADGET_SA1100
 /* use non-CDC for backwards compatibility */
 #define	DEV_CONFIG_SUBSET
@@ -2321,6 +2325,8 @@ eth_bind (struct usb_gadget *gadget)
 		device_desc.bcdDevice = __constant_cpu_to_le16 (0x0209);
 	} else if (gadget_is_n9604(gadget)) {
 		device_desc.bcdDevice = __constant_cpu_to_le16 (0x0210);
+	} else if (gadget_is_pxa27x(gadget)) {
+		device_desc.bcdDevice = __constant_cpu_to_le16 (0x0211);
 	} else {
 		/* can't assume CDC works.  don't want to default to
 		 * anything less functional on CDC-capable hardware,

drivers/usb/gadget/file_storage.c

@@ -3739,6 +3739,8 @@ static int __init check_parameters(struct fsg_dev *fsg)
 			mod_data.release = 0x0309;
 		else if (gadget_is_n9604(fsg->gadget))
 			mod_data.release = 0x0310;
+		else if (gadget_is_pxa27x(fsg->gadget))
+			mod_data.release = 0x0311;
 		else {
 			WARN(fsg, "controller '%s' not recognized\n",
 				fsg->gadget->name);

drivers/usb/gadget/gadget_chips.h

@@ -68,6 +68,12 @@
 #define	gadget_is_n9604(g)	0
 #endif
 
+#ifdef CONFIG_USB_GADGET_PXA27X
+#define	gadget_is_pxa27x(g)	!strcmp("pxa27x_udc", (g)->name)
+#else
+#define	gadget_is_pxa27x(g)	0
+#endif
+
 // CONFIG_USB_GADGET_AT91RM9200
 // CONFIG_USB_GADGET_SX2
 // CONFIG_USB_GADGET_AU1X00

drivers/usb/gadget/serial.c

@@ -1529,6 +1529,9 @@ static int gs_bind(struct usb_gadget *gadget)
 	} else if (gadget_is_n9604(gadget)) {
 		gs_device_desc.bcdDevice =
 			__constant_cpu_to_le16(GS_VERSION_NUM|0x0009);
+	} else if (gadget_is_pxa27x(gadget)) {
+		gs_device_desc.bcdDevice =
+			__constant_cpu_to_le16(GS_VERSION_NUM|0x0011);
 	} else {
 		printk(KERN_WARNING "gs_bind: controller '%s' not recognized\n",
 			gadget->name);

drivers/usb/gadget/zero.c

@@ -1190,6 +1190,8 @@ zero_bind (struct usb_gadget *gadget)
 		device_desc.bcdDevice = __constant_cpu_to_le16 (0x0209);
 	} else if (gadget_is_n9604(gadget)) {
 		device_desc.bcdDevice = __constant_cpu_to_le16 (0x0210);
+	} else if (gadget_is_pxa27x(gadget)) {
+		device_desc.bcdDevice = __constant_cpu_to_le16 (0x0211);
 	} else {
 		/* gadget zero is so simple (for now, no altsettings) that
 		 * it SHOULD NOT have problems with bulk-capable hardware.

drivers/usb/host/ehci-hcd.c

@@ -379,6 +379,14 @@ static int ehci_hc_reset (struct usb_hcd *hcd)
 	/* cache this readonly data; minimize PCI reads */
 	ehci->hcs_params = readl (&ehci->caps->hcs_params);
 
+	/* at least the Genesys GL880S needs fixup here */
+	temp = HCS_N_CC(ehci->hcs_params) * HCS_N_PCC(ehci->hcs_params);
+	temp &= 0x0f;
+	if (temp && HCS_N_PORTS(ehci->hcs_params) > temp) {
+		temp |= (ehci->hcs_params & ~0xf);
+		ehci->hcs_params = temp;
+	}
+
 	/* force HC to halt state */
 	return ehci_halt (ehci);
 }

drivers/usb/host/ehci-hub.c

@@ -281,8 +281,11 @@ ehci_hub_descriptor (
 	temp = 0x0008;			/* per-port overcurrent reporting */
 	if (HCS_PPC (ehci->hcs_params))
 		temp |= 0x0001;		/* per-port power control */
+#if 0
+// re-enable when we support USB_PORT_FEAT_INDICATOR below.
 	if (HCS_INDICATOR (ehci->hcs_params))
 		temp |= 0x0080;		/* per-port indicators (LEDs) */
+#endif
 	desc->wHubCharacteristics = cpu_to_le16 (temp);
 }
 

drivers/usb/host/ehci-q.c

@@ -175,6 +175,8 @@ static void qtd_copy_status (
 
 static void
 ehci_urb_done (struct ehci_hcd *ehci, struct urb *urb, struct pt_regs *regs)
+__releases(ehci->lock)
+__acquires(ehci->lock)
 {
 	if (likely (urb->hcpriv != 0)) {
 		struct ehci_qh	*qh = (struct ehci_qh *) urb->hcpriv;

drivers/usb/host/ohci-q.c

@@ -35,6 +35,8 @@ static void urb_free_priv (struct ohci_hcd *hc, urb_priv_t *urb_priv)
  */
 static void
 finish_urb (struct ohci_hcd *ohci, struct urb *urb, struct pt_regs *regs)
+__releases(ohci->lock)
+__acquires(ohci->lock)
 {
 	// ASSERT (urb->hcpriv != 0);
 

drivers/usb/host/uhci-hcd.c

@@ -1602,7 +1602,10 @@ static void uhci_free_pending_tds(struct uhci_hcd *uhci)
 	}
 }
 
-static void uhci_finish_urb(struct usb_hcd *hcd, struct urb *urb, struct pt_regs *regs)
+static void
+uhci_finish_urb(struct usb_hcd *hcd, struct urb *urb, struct pt_regs *regs)
+__releases(uhci->schedule_lock)
+__acquires(uhci->schedule_lock)
 {
 	struct uhci_hcd *uhci = hcd_to_uhci(hcd);
 

drivers/usb/input/ati_remote.c

@@ -102,6 +102,7 @@
 #define ATI_REMOTE_VENDOR_ID 	0x0bc7
 #define ATI_REMOTE_PRODUCT_ID 	0x004
 #define LOLA_REMOTE_PRODUCT_ID 	0x002
+#define MEDION_REMOTE_PRODUCT_ID 0x006
 
 #define DRIVER_VERSION 	        "2.2.1"
 #define DRIVER_AUTHOR           "Torrey Hoffman <thoffman@arnor.net>"
@@ -126,6 +127,7 @@ MODULE_PARM_DESC(debug, "Enable extra debug messages and information");
 static struct usb_device_id ati_remote_table[] = {
 	{ USB_DEVICE(ATI_REMOTE_VENDOR_ID, ATI_REMOTE_PRODUCT_ID) },
 	{ USB_DEVICE(ATI_REMOTE_VENDOR_ID, LOLA_REMOTE_PRODUCT_ID) },
+	{ USB_DEVICE(ATI_REMOTE_VENDOR_ID, MEDION_REMOTE_PRODUCT_ID) },
 	{}	/* Terminating entry */
 };
 
@@ -730,7 +732,8 @@ static int ati_remote_probe(struct usb_interface *interface, const struct usb_de
 	/* See if the offered device matches what we can accept */
 	if ((udev->descriptor.idVendor != ATI_REMOTE_VENDOR_ID) ||
 		( (udev->descriptor.idProduct != ATI_REMOTE_PRODUCT_ID) &&
-		  (udev->descriptor.idProduct != LOLA_REMOTE_PRODUCT_ID) ))
+		  (udev->descriptor.idProduct != LOLA_REMOTE_PRODUCT_ID) &&
+		  (udev->descriptor.idProduct != MEDION_REMOTE_PRODUCT_ID) ))
 		return -ENODEV;
 
 	/* Allocate and clear an ati_remote struct */

drivers/usb/input/hid-core.c

@@ -94,7 +94,8 @@ static struct hid_field *hid_register_field(struct hid_report *report, unsigned
 	memset(field, 0, sizeof(struct hid_field) + usages * sizeof(struct hid_usage)
 		+ values * sizeof(unsigned));
 
-	report->field[report->maxfield++] = field;
+	field->index = report->maxfield++;
+	report->field[field->index] = field;
 	field->usage = (struct hid_usage *)(field + 1);
 	field->value = (unsigned *)(field->usage + usages);
 	field->report = report;

drivers/usb/input/touchkitusb.c

@@ -59,6 +59,10 @@
 #define DRIVER_AUTHOR			"Daniel Ritz <daniel.ritz@gmx.ch>"
 #define DRIVER_DESC			"eGalax TouchKit USB HID Touchscreen Driver"
 
+static int swap_xy;
+module_param(swap_xy, bool, 0644);
+MODULE_PARM_DESC(swap_xy, "If set X and Y axes are swapped.");
+
 struct touchkit_usb {
 	unsigned char *data;
 	dma_addr_t data_dma;
@@ -80,6 +84,7 @@ static void touchkit_irq(struct urb *urb, struct pt_regs *regs)
 {
 	struct touchkit_usb *touchkit = urb->context;
 	int retval;
+	int x, y;
 
 	switch (urb->status) {
 	case 0:
@@ -103,13 +108,19 @@ static void touchkit_irq(struct urb *urb, struct pt_regs *regs)
 		goto exit;
 	}
 
+	if (swap_xy) {
+		y = TOUCHKIT_GET_X(touchkit->data);
+		x = TOUCHKIT_GET_Y(touchkit->data);
+	} else {
+		x = TOUCHKIT_GET_X(touchkit->data);
+		y = TOUCHKIT_GET_Y(touchkit->data);
+	}
+
 	input_regs(&touchkit->input, regs);
 	input_report_key(&touchkit->input, BTN_TOUCH,
 	                 TOUCHKIT_GET_TOUCHED(touchkit->data));
-	input_report_abs(&touchkit->input, ABS_X,
-	                 TOUCHKIT_GET_X(touchkit->data));
-	input_report_abs(&touchkit->input, ABS_Y,
-	                 TOUCHKIT_GET_Y(touchkit->data));
+	input_report_abs(&touchkit->input, ABS_X, x);
+	input_report_abs(&touchkit->input, ABS_Y, y);
 	input_sync(&touchkit->input);
 
 exit:

drivers/usb/net/usbnet.c

@@ -527,7 +527,7 @@ static void ax8817x_interrupt_complete(struct urb *urb, struct pt_regs *regs)
 				devdbg(dev, "ax8817x - Link Status is: %d", link);
 			}
 		}
-		usb_submit_urb(data->int_urb, GFP_KERNEL);
+		usb_submit_urb(data->int_urb, GFP_ATOMIC);
 	}
 }
 

drivers/usb/serial/io_edgeport.c

@@ -2797,9 +2797,12 @@ static void change_port_settings (struct edgeport_port *edge_port, struct termio
 static void unicode_to_ascii (char *string, __le16 *unicode, int unicode_size)
 {
 	int i;
-	for (i = 0; i < unicode_size; ++i) {
+
+	if (unicode_size <= 0)
+		return;
+
+	for (i = 0; i < unicode_size; ++i)
 		string[i] = (char)(le16_to_cpu(unicode[i]));
-	}
 	string[unicode_size] = 0x00;
 }
 

drivers/usb/serial/visor.c

@@ -494,10 +494,9 @@ static int visor_write (struct usb_serial_port *port, const unsigned char *buf,
 	spin_lock_irqsave(&priv->lock, flags);
 	if (priv->outstanding_urbs > URB_UPPER_LIMIT) {
 		spin_unlock_irqrestore(&priv->lock, flags);
-		dev_dbg(&port->dev, "write limit hit\n");
+		dbg("%s - write limit hit\n", __FUNCTION__);
 		return 0;
 	}
-	++priv->outstanding_urbs;
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	buffer = kmalloc (count, GFP_ATOMIC);

drivers/usb/storage/Kconfig

@@ -2,16 +2,23 @@
 # USB Storage driver configuration
 #
 
+comment "NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information"
+
 config USB_STORAGE
 	tristate "USB Mass Storage support"
 	depends on USB
 	select SCSI
 	---help---
 	  Say Y here if you want to connect USB mass storage devices to your
-	  computer's USB port. This is the driver you need for USB floppy drives,
-	  USB hard disks, USB tape drives and USB CD-ROMs, along with
-	  similar devices. This driver may also be used for some cameras and
-	  card readers.
+	  computer's USB port. This is the driver you need for USB
+	  floppy drives, USB hard disks, USB tape drives, USB CD-ROMs,
+	  USB flash devices, and memory sticks, along with
+	  similar devices. This driver may also be used for some cameras
+	  and card readers.
+
+	  This option 'selects' (turns on, enables) 'SCSI', but you
+	  probably also need 'SCSI device support: SCSI disk support'
+	  (BLK_DEV_SD) for most USB storage devices.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called usb-storage.

drivers/usb/storage/unusual_devs.h

@@ -274,6 +274,14 @@ UNUSUAL_DEV(  0x052b, 0x1801, 0x0100, 0x0100,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE ),
 
+/* Another Yakumo camera.
+ * Reported by Michele Alzetta <michele.alzetta@aliceposta.it> */
+UNUSUAL_DEV(  0x052b, 0x1804, 0x0100, 0x0100,
+		"Tekom Technologies, Inc",
+		"300_CAMERA",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_IGNORE_RESIDUE ),
+
 /* Reported by Iacopo Spalletti <avvisi@spalletti.it> */
 UNUSUAL_DEV(  0x052b, 0x1807, 0x0100, 0x0100,
 		"Tekom Technologies, Inc",

include/linux/usbdevice_fs.h

@@ -144,29 +144,4 @@ struct usbdevfs_hub_portinfo {
 #define USBDEVFS_DISCONNECT        _IO('U', 22)
 #define USBDEVFS_CONNECT           _IO('U', 23)
 
-/* --------------------------------------------------------------------- */
-
-#ifdef __KERNEL__
-
-#include <linux/list.h>
-#include <asm/semaphore.h>
-
-
-struct dev_state {
-	struct list_head list;      /* state list */
-	struct usb_device *dev;
-	struct file *file;
-	spinlock_t lock;            /* protects the async urb lists */
-	struct list_head async_pending;
-	struct list_head async_completed;
-	wait_queue_head_t wait;     /* wake up if a request completed */
-	unsigned int discsignr;
-	struct task_struct *disctask;
-	void __user *disccontext;
-	unsigned long ifclaimed;
-};
-
-#endif /* __KERNEL__ */
-
-/* --------------------------------------------------------------------- */
 #endif /* _LINUX_USBDEVICE_FS_H */