Commit f82f16d2 authored by Bob Liu's avatar Bob Liu

bfin: reorg clock init steps for bf609

So that user can set the clocks through menuconfig.
Signed-off-by: default avatarBob Liu <lliubbo@gmail.com>
parent e70f4660
......@@ -352,6 +352,11 @@ config MEM_MT48H32M16LFCJ_75
depends on (BFIN526_EZBRD)
default y
config MEM_MT47H64M16
bool
depends on (BFIN609_EZKIT)
default y
source "arch/blackfin/mach-bf518/Kconfig"
source "arch/blackfin/mach-bf527/Kconfig"
source "arch/blackfin/mach-bf533/Kconfig"
......
......@@ -6,6 +6,9 @@
* Licensed under the GPL-2 or later.
*/
#ifndef __MEM_INIT_H__
#define __MEM_INIT_H__
#if defined(EBIU_SDGCTL)
#if defined(CONFIG_MEM_MT48LC16M16A2TG_75) || \
defined(CONFIG_MEM_MT48LC64M4A2FB_7E) || \
......@@ -277,3 +280,212 @@
#else
#define PLL_BYPASS 0
#endif
#ifdef CONFIG_BF60x
/* DMC status bits */
#define IDLE 0x1
#define MEMINITDONE 0x4
#define SRACK 0x8
#define PDACK 0x10
#define DPDACK 0x20
#define DLLCALDONE 0x2000
#define PENDREF 0xF0000
#define PHYRDPHASE 0xF00000
#define PHYRDPHASE_OFFSET 20
/* DMC control bits */
#define LPDDR 0x2
#define INIT 0x4
#define SRREQ 0x8
#define PDREQ 0x10
#define DPDREQ 0x20
#define PREC 0x40
#define ADDRMODE 0x100
#define RDTOWR 0xE00
#define PPREF 0x1000
#define DLLCAL 0x2000
/* DMC DLL control bits */
#define DLLCALRDCNT 0xFF
#define DATACYC 0xF00
#define DATACYC_OFFSET 8
/* CGU Divisor bits */
#define CSEL_OFFSET 0
#define S0SEL_OFFSET 5
#define SYSSEL_OFFSET 8
#define S1SEL_OFFSET 13
#define DSEL_OFFSET 16
#define OSEL_OFFSET 22
#define ALGN 0x20000000
#define UPDT 0x40000000
#define LOCK 0x80000000
/* CGU Status bits */
#define PLLEN 0x1
#define PLLBP 0x2
#define PLOCK 0x4
#define CLKSALGN 0x8
/* CGU Control bits */
#define MSEL_MASK 0x7F00
#define DF_MASK 0x1
struct ddr_config {
u32 ddr_clk;
u32 dmc_ddrctl;
u32 dmc_ddrcfg;
u32 dmc_ddrtr0;
u32 dmc_ddrtr1;
u32 dmc_ddrtr2;
u32 dmc_ddrmr;
u32 dmc_ddrmr1;
};
#if defined(CONFIG_MEM_MT47H64M16)
static struct ddr_config ddr_config_table[] __attribute__((section(".data_l1"))) = {
[0] = {
.ddr_clk = 125,
.dmc_ddrctl = 0x00000904,
.dmc_ddrcfg = 0x00000422,
.dmc_ddrtr0 = 0x20705212,
.dmc_ddrtr1 = 0x201003CF,
.dmc_ddrtr2 = 0x00320107,
.dmc_ddrmr = 0x00000422,
.dmc_ddrmr1 = 0x4,
},
[1] = {
.ddr_clk = 133,
.dmc_ddrctl = 0x00000904,
.dmc_ddrcfg = 0x00000422,
.dmc_ddrtr0 = 0x20806313,
.dmc_ddrtr1 = 0x2013040D,
.dmc_ddrtr2 = 0x00320108,
.dmc_ddrmr = 0x00000632,
.dmc_ddrmr1 = 0x4,
},
[2] = {
.ddr_clk = 150,
.dmc_ddrctl = 0x00000904,
.dmc_ddrcfg = 0x00000422,
.dmc_ddrtr0 = 0x20A07323,
.dmc_ddrtr1 = 0x20160492,
.dmc_ddrtr2 = 0x00320209,
.dmc_ddrmr = 0x00000632,
.dmc_ddrmr1 = 0x4,
},
[3] = {
.ddr_clk = 166,
.dmc_ddrctl = 0x00000904,
.dmc_ddrcfg = 0x00000422,
.dmc_ddrtr0 = 0x20A07323,
.dmc_ddrtr1 = 0x2016050E,
.dmc_ddrtr2 = 0x00320209,
.dmc_ddrmr = 0x00000632,
.dmc_ddrmr1 = 0x4,
},
[4] = {
.ddr_clk = 200,
.dmc_ddrctl = 0x00000904,
.dmc_ddrcfg = 0x00000422,
.dmc_ddrtr0 = 0x20a07323,
.dmc_ddrtr1 = 0x2016050f,
.dmc_ddrtr2 = 0x00320509,
.dmc_ddrmr = 0x00000632,
.dmc_ddrmr1 = 0x4,
},
[5] = {
.ddr_clk = 225,
.dmc_ddrctl = 0x00000904,
.dmc_ddrcfg = 0x00000422,
.dmc_ddrtr0 = 0x20E0A424,
.dmc_ddrtr1 = 0x302006DB,
.dmc_ddrtr2 = 0x0032020D,
.dmc_ddrmr = 0x00000842,
.dmc_ddrmr1 = 0x4,
},
[6] = {
.ddr_clk = 250,
.dmc_ddrctl = 0x00000904,
.dmc_ddrcfg = 0x00000422,
.dmc_ddrtr0 = 0x20E0A424,
.dmc_ddrtr1 = 0x3020079E,
.dmc_ddrtr2 = 0x0032020D,
.dmc_ddrmr = 0x00000842,
.dmc_ddrmr1 = 0x4,
},
};
#endif
static inline void dmc_enter_self_refresh(void)
{
if (bfin_read_DMC0_STAT() & MEMINITDONE) {
bfin_write_DMC0_CTL(bfin_read_DMC0_CTL() | SRREQ);
while (!(bfin_read_DMC0_STAT() & SRACK))
continue;
}
}
static inline void dmc_exit_self_refresh(void)
{
if (bfin_read_DMC0_STAT() & MEMINITDONE) {
bfin_write_DMC0_CTL(bfin_read_DMC0_CTL() & ~SRREQ);
while (bfin_read_DMC0_STAT() & SRACK)
continue;
}
}
static inline void init_cgu(u32 cgu_div, u32 cgu_ctl)
{
dmc_enter_self_refresh();
/* Don't set the same value of MSEL and DF to CGU_CTL */
if ((bfin_read32(CGU0_CTL) & (MSEL_MASK | DF_MASK))
!= cgu_ctl) {
bfin_write32(CGU0_DIV, cgu_div);
bfin_write32(CGU0_CTL, cgu_ctl);
while ((bfin_read32(CGU0_STAT) & (CLKSALGN | PLLBP)) ||
!(bfin_read32(CGU0_STAT) & PLOCK))
continue;
}
bfin_write32(CGU0_DIV, cgu_div | UPDT);
while (bfin_read32(CGU0_STAT) & CLKSALGN)
continue;
dmc_exit_self_refresh();
}
static inline void init_dmc(u32 dmc_clk)
{
int i, dlldatacycle, dll_ctl;
for (i = 0; i < 7; i++) {
if (ddr_config_table[i].ddr_clk == dmc_clk) {
bfin_write_DMC0_CFG(ddr_config_table[i].dmc_ddrcfg);
bfin_write_DMC0_TR0(ddr_config_table[i].dmc_ddrtr0);
bfin_write_DMC0_TR1(ddr_config_table[i].dmc_ddrtr1);
bfin_write_DMC0_TR2(ddr_config_table[i].dmc_ddrtr2);
bfin_write_DMC0_MR(ddr_config_table[i].dmc_ddrmr);
bfin_write_DMC0_EMR1(ddr_config_table[i].dmc_ddrmr1);
bfin_write_DMC0_CTL(ddr_config_table[i].dmc_ddrctl);
break;
}
}
while (!(bfin_read_DMC0_STAT() & MEMINITDONE))
continue;
dlldatacycle = (bfin_read_DMC0_STAT() & PHYRDPHASE) >> PHYRDPHASE_OFFSET;
dll_ctl = bfin_read_DMC0_DLLCTL();
dll_ctl &= ~DATACYC;
bfin_write_DMC0_DLLCTL(dll_ctl | (dlldatacycle << DATACYC_OFFSET));
while (!(bfin_read_DMC0_STAT() & DLLCALDONE))
continue;
}
#endif
#endif /*__MEM_INIT_H__*/
......@@ -2665,7 +2665,6 @@
#define DEVSZ_1G 0x400 /* DMC External Bank Size = 1Gbit */
#define DEVSZ_2G 0x500 /* DMC External Bank Size = 2Gbit */
/* =========================
L2CTL Registers
========================= */
......
......@@ -16,23 +16,14 @@
#include <asm/dpmc.h>
#ifdef CONFIG_BF60x
#define CSEL_P 0
#define S0SEL_P 5
#define SYSSEL_P 8
#define S1SEL_P 13
#define DSEL_P 16
#define OSEL_P 22
#define ALGN_P 29
#define UPDT_P 30
#define LOCK_P 31
#define CGU_CTL_VAL ((CONFIG_VCO_MULT << 8) | CLKIN_HALF)
#define CGU_DIV_VAL \
((CONFIG_CCLK_DIV << CSEL_P) | \
(CONFIG_SCLK_DIV << SYSSEL_P) | \
(CONFIG_SCLK0_DIV << S0SEL_P) | \
(CONFIG_SCLK1_DIV << S1SEL_P) | \
(CONFIG_DCLK_DIV << DSEL_P))
((CONFIG_CCLK_DIV << CSEL_OFFSET) | \
(CONFIG_SCLK_DIV << SYSSEL_OFFSET) | \
(CONFIG_SCLK0_DIV << S0SEL_OFFSET) | \
(CONFIG_SCLK1_DIV << S1SEL_OFFSET) | \
(CONFIG_DCLK_DIV << DSEL_OFFSET))
#define CONFIG_BFIN_DCLK (((CONFIG_CLKIN_HZ * CONFIG_VCO_MULT) / CONFIG_DCLK_DIV) / 1000000)
#if ((CONFIG_BFIN_DCLK != 125) && \
......@@ -41,89 +32,7 @@
(CONFIG_BFIN_DCLK != 225) && (CONFIG_BFIN_DCLK != 250))
#error "DCLK must be in (125, 133, 150, 166, 200, 225, 250)MHz"
#endif
struct ddr_config {
u32 ddr_clk;
u32 dmc_ddrctl;
u32 dmc_ddrcfg;
u32 dmc_ddrtr0;
u32 dmc_ddrtr1;
u32 dmc_ddrtr2;
u32 dmc_ddrmr;
u32 dmc_ddrmr1;
};
struct ddr_config ddr_config_table[] __attribute__((section(".data_l1"))) = {
[0] = {
.ddr_clk = 125,
.dmc_ddrctl = 0x00000904,
.dmc_ddrcfg = 0x00000422,
.dmc_ddrtr0 = 0x20705212,
.dmc_ddrtr1 = 0x201003CF,
.dmc_ddrtr2 = 0x00320107,
.dmc_ddrmr = 0x00000422,
.dmc_ddrmr1 = 0x4,
},
[1] = {
.ddr_clk = 133,
.dmc_ddrctl = 0x00000904,
.dmc_ddrcfg = 0x00000422,
.dmc_ddrtr0 = 0x20806313,
.dmc_ddrtr1 = 0x2013040D,
.dmc_ddrtr2 = 0x00320108,
.dmc_ddrmr = 0x00000632,
.dmc_ddrmr1 = 0x4,
},
[2] = {
.ddr_clk = 150,
.dmc_ddrctl = 0x00000904,
.dmc_ddrcfg = 0x00000422,
.dmc_ddrtr0 = 0x20A07323,
.dmc_ddrtr1 = 0x20160492,
.dmc_ddrtr2 = 0x00320209,
.dmc_ddrmr = 0x00000632,
.dmc_ddrmr1 = 0x4,
},
[3] = {
.ddr_clk = 166,
.dmc_ddrctl = 0x00000904,
.dmc_ddrcfg = 0x00000422,
.dmc_ddrtr0 = 0x20A07323,
.dmc_ddrtr1 = 0x2016050E,
.dmc_ddrtr2 = 0x00320209,
.dmc_ddrmr = 0x00000632,
.dmc_ddrmr1 = 0x4,
},
[4] = {
.ddr_clk = 200,
.dmc_ddrctl = 0x00000904,
.dmc_ddrcfg = 0x00000422,
.dmc_ddrtr0 = 0x20a07323,
.dmc_ddrtr1 = 0x2016050f,
.dmc_ddrtr2 = 0x00320509,
.dmc_ddrmr = 0x00000632,
.dmc_ddrmr1 = 0x4,
},
[5] = {
.ddr_clk = 225,
.dmc_ddrctl = 0x00000904,
.dmc_ddrcfg = 0x00000422,
.dmc_ddrtr0 = 0x20E0A424,
.dmc_ddrtr1 = 0x302006DB,
.dmc_ddrtr2 = 0x0032020D,
.dmc_ddrmr = 0x00000842,
.dmc_ddrmr1 = 0x4,
},
[6] = {
.ddr_clk = 250,
.dmc_ddrctl = 0x00000904,
.dmc_ddrcfg = 0x00000422,
.dmc_ddrtr0 = 0x20E0A424,
.dmc_ddrtr1 = 0x3020079E,
.dmc_ddrtr2 = 0x0032020D,
.dmc_ddrmr = 0x00000842,
.dmc_ddrmr1 = 0x4,
},
};
#else
#define SDGCTL_WIDTH (1 << 31) /* SDRAM external data path width */
#define PLL_CTL_VAL \
......@@ -144,43 +53,9 @@ void init_clocks(void)
* in the middle of reprogramming things, and that'll screw us up.
* For example, any automatic DMAs left by U-Boot for splash screens.
*/
#ifdef CONFIG_BF60x
int i, dlldatacycle, dll_ctl;
bfin_write32(CGU0_DIV, CGU_DIV_VAL);
bfin_write32(CGU0_CTL, CGU_CTL_VAL);
while ((bfin_read32(CGU0_STAT) & 0x8) || !(bfin_read32(CGU0_STAT) & 0x4))
continue;
bfin_write32(CGU0_DIV, CGU_DIV_VAL | (1 << UPDT_P));
while (bfin_read32(CGU0_STAT) & (1 << 3))
continue;
for (i = 0; i < 7; i++) {
if (ddr_config_table[i].ddr_clk == CONFIG_BFIN_DCLK) {
bfin_write_DDR0_CFG(ddr_config_table[i].dmc_ddrcfg);
bfin_write_DDR0_TR0(ddr_config_table[i].dmc_ddrtr0);
bfin_write_DDR0_TR1(ddr_config_table[i].dmc_ddrtr1);
bfin_write_DDR0_TR2(ddr_config_table[i].dmc_ddrtr2);
bfin_write_DDR0_MR(ddr_config_table[i].dmc_ddrmr);
bfin_write_DDR0_EMR1(ddr_config_table[i].dmc_ddrmr1);
bfin_write_DDR0_CTL(ddr_config_table[i].dmc_ddrctl);
break;
}
}
do_sync();
while (!(bfin_read_DDR0_STAT() & 0x4))
continue;
dlldatacycle = (bfin_read_DDR0_STAT() & 0x00f00000) >> 20;
dll_ctl = bfin_read_DDR0_DLLCTL();
dll_ctl &= 0x0ff;
bfin_write_DDR0_DLLCTL(dll_ctl | (dlldatacycle << 8));
do_sync();
while (!(bfin_read_DDR0_STAT() & 0x2000))
continue;
init_cgu(CGU_DIV_VAL, CGU_CTL_VAL);
init_dmc(CONFIG_BFIN_DCLK);
#else
size_t i;
for (i = 0; i < MAX_DMA_CHANNELS; ++i) {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment