staging: brcm80211: moved code around for cleanup

Restructured code to have more consistent directory tree for the
two drivers.
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/staging/brcm80211/Kconfig

@@ -8,7 +8,7 @@ choice
 	help
 	Select the appropriate driver style from the list below.
 
-config BRCM80211_PCI
+config BRCMSMAC
 	bool "Broadcom IEEE802.11n PCIe SoftMAC WLAN driver"
 	depends on PCI
 	depends on BRCM80211 && MAC80211
@@ -16,7 +16,7 @@ config BRCM80211_PCI
 	---help---
 	  This module adds support for PCIe wireless adapters based on Broadcom
 	  IEEE802.11n SoftMAC chipsets.  If you choose to build a module, it'll
-	  be called brcm80211.ko.
+	  be called brcmsmac.ko.
 
 config BRCMFMAC
 	bool "Broadcom IEEE802.11n embedded FullMAC WLAN driver"

drivers/staging/brcm80211/Makefile

@@ -15,62 +15,5 @@
 # OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
 # CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 
-ccflags-y :=					\
-	-DBCMDBG				\
-	-DWLC_HIGH				\
-	-DSTA					\
-	-DWME					\
-	-DWL11N					\
-	-DDBAND					\
-	-DBCMDMA32				\
-	-DBCMNVRAMR				\
-	-Idrivers/staging/brcm80211/sys		\
-	-Idrivers/staging/brcm80211/phy		\
-	-Idrivers/staging/brcm80211/util	\
-	-Idrivers/staging/brcm80211/include
-
-PCI_CFLAGS := -DWLC_LOW
-
-BRCM80211_OFILES := \
-	util/siutils.o \
-	util/aiutils.o \
-	util/bcmotp.o \
-	util/bcmsrom.o \
-	util/bcmutils.o \
-	util/bcmwifi.o \
-	util/hndpmu.o \
-	util/linux_osl.o \
-	sys/wlc_alloc.o \
-	sys/wlc_antsel.o \
-	sys/wlc_channel.o \
-	sys/wlc_event.o \
-	sys/wlc_mac80211.o \
-	sys/wlc_rate.o \
-	sys/wlc_stf.o \
-	sys/wl_mac80211.o \
-	sys/wlc_ampdu.o
-
-PCIFILES := \
-	phy/wlc_phy_cmn.o \
-	phy/wlc_phy_lcn.o \
-	phy/wlc_phy_n.o \
-	phy/wlc_phytbl_lcn.o \
-	phy/wlc_phytbl_n.o \
-	sys/wlc_bmac.o \
-	sys/wlc_phy_shim.o \
-	sys/wl_ucode_loader.o \
-	util/hnddma.o \
-	util/nicpci.o \
-	util/nvram/nvram_ro.o \
-	util/qmath.o
-
-MODULEPFX := brcm80211
-
-# PCI driver
-ifeq ($(CONFIG_BRCM80211_PCI),y)
-obj-m	+= $(MODULEPFX).o
-ccflags-y += $(PCI_CFLAGS)
-$(MODULEPFX)-objs	= $(BRCM80211_OFILES) $(PCIFILES)
-endif
-
-obj-$(CONFIG_BRCMFMAC)    += brcmfmac/
+obj-$(CONFIG_BRCMFMAC)	+= brcmfmac/
+obj-$(CONFIG_BRCMSMAC)	+= brcmsmac/

drivers/staging/brcm80211/brcmfmac/Kconfig

-menuconfig BRCMFMAC
-	tristate "Broadcom fullmac wireless cards support"
-	depends on MMC
-	depends on CFG80211
-	select FW_LOADER
-	select WIRELESS_EXT
-	select WEXT_PRIV
-	---help---
-	  This module adds support for wireless adapters based on
-	  Broadcom fullmac chipsets.
-	  This driver uses the kernel's wireless extensions subsystem.
-	  If you choose to build a module, it'll be called brcmfmac.ko. Say M if
-	  unsure.
-
-

drivers/staging/brcm80211/brcmfmac/Makefile

@@ -37,10 +37,26 @@ ccflags-y :=			\
 	-Idrivers/staging/brcm80211/include		\
 	-Idrivers/staging/brcm80211/util
 
-DHDOFILES = dhd_linux.o ../util/linux_osl.o ../util/bcmutils.o dhd_common.o dhd_custom_gpio.o	\
-	wl_iw.o wl_cfg80211.o ../util/siutils.o ../util/sbutils.o ../util/aiutils.o ../util/hndpmu.o ../util/bcmwifi.o dhd_sdio.o	\
-	dhd_linux_sched.o dhd_cdc.o bcmsdh_sdmmc.o bcmsdh.o bcmsdh_linux.o	\
-	bcmsdh_sdmmc_linux.o
+DHDOFILES = \
+	wl_cfg80211.o \
+	wl_iw.o \
+	dhd_cdc.o \
+	dhd_common.o \
+	dhd_custom_gpio.o \
+	dhd_sdio.o	\
+	dhd_linux.o \
+	dhd_linux_sched.o \
+	bcmsdh.o \
+	bcmsdh_linux.o	\
+	bcmsdh_sdmmc.o \
+	bcmsdh_sdmmc_linux.o \
+	../util/linux_osl.o \
+	../util/aiutils.o \
+	../util/siutils.o \
+	../util/sbutils.o \
+	../util/bcmutils.o \
+	../util/bcmwifi.o \
+	../util/hndpmu.o
 
 obj-m += brcmfmac.o
 brcmfmac-objs += $(DHDOFILES)

drivers/staging/brcm80211/brcmsmac/Makefile

+#
+# Makefile fragment for Broadcom 802.11n Networking Device Driver
+#
+# Copyright (c) 2010 Broadcom Corporation
+#
+# Permission to use, copy, modify, and/or distribute this software for any
+# purpose with or without fee is hereby granted, provided that the above
+# copyright notice and this permission notice appear in all copies.
+#
+# THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+# WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
+# SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+# WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
+# OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+# CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+
+ccflags-y :=					\
+	-DBCMDBG				\
+	-DWLC_HIGH				\
+	-DWLC_LOW				\
+	-DSTA					\
+	-DWME					\
+	-DWL11N					\
+	-DDBAND					\
+	-DBCMDMA32				\
+	-DBCMNVRAMR				\
+	-Idrivers/staging/brcm80211/brcmsmac/sys \
+	-Idrivers/staging/brcm80211/brcmsmac/phy \
+	-Idrivers/staging/brcm80211/util \
+	-Idrivers/staging/brcm80211/include
+
+BRCMSMAC_OFILES := \
+	sys/wl_mac80211.o \
+	sys/wl_ucode_loader.o \
+	sys/wlc_alloc.o \
+	sys/wlc_ampdu.o \
+	sys/wlc_antsel.o \
+	sys/wlc_bmac.o \
+	sys/wlc_channel.o \
+	sys/wlc_event.o \
+	sys/wlc_mac80211.o \
+	sys/wlc_phy_shim.o \
+	sys/wlc_rate.o \
+	sys/wlc_stf.o \
+	phy/wlc_phy_cmn.o \
+	phy/wlc_phy_lcn.o \
+	phy/wlc_phy_n.o \
+	phy/wlc_phytbl_lcn.o \
+	phy/wlc_phytbl_n.o \
+	../util/linux_osl.o \
+	../util/aiutils.o \
+	../util/siutils.o \
+	../util/bcmutils.o \
+	../util/bcmwifi.o \
+	../util/bcmotp.o \
+	../util/bcmsrom.o \
+	../util/hnddma.o \
+	../util/hndpmu.o \
+	../util/nicpci.o \
+	../util/qmath.o \
+	../util/nvram/nvram_ro.o
+
+MODULEPFX := brcmsmac
+
+obj-m	+= $(MODULEPFX).o
+$(MODULEPFX)-objs	= $(BRCMSMAC_OFILES)

drivers/staging/brcm80211/include/bcmsdh.h

@@ -17,6 +17,7 @@
 #ifndef	_bcmsdh_h_
 #define	_bcmsdh_h_
 
+#include <linux/skbuff.h>
 #define BCMSDH_ERROR_VAL	0x0001	/* Error */
 #define BCMSDH_INFO_VAL		0x0002	/* Info */
 extern const uint bcmsdh_msglevel;

drivers/staging/brcm80211/util/aiutils.c

@@ -18,9 +18,6 @@
 #include <linux/kernel.h>
 #include <linux/string.h>
 #include <bcmdefs.h>
-#ifdef BRCM_FULLMAC
-#include <linux/netdevice.h>
-#endif
 #include <osl.h>
 #include <linux/module.h>
 #include <linux/pci.h>

drivers/staging/brcm80211/util/bcmwifi.c

@@ -15,9 +15,6 @@
  */
 #include <linux/ctype.h>
 #include <linux/kernel.h>
-#ifdef BRCM_FULLMAC
-#include <linux/netdevice.h>
-#endif
 #include <osl.h>
 #include <bcmdefs.h>
 #include <bcmutils.h>

drivers/staging/brcm80211/util/hndpmu.c

@@ -18,9 +18,6 @@
 #include <linux/string.h>
 #include <linux/module.h>
 #include <linux/pci.h>
-#ifdef BRCM_FULLMAC
-#include <linux/netdevice.h>
-#endif
 #include <bcmdefs.h>
 #include <osl.h>
 #include <bcmutils.h>

drivers/staging/brcm80211/util/siutils.c

@@ -18,9 +18,6 @@
 #include <linux/kernel.h>
 #include <linux/string.h>
 #include <bcmdefs.h>
-#ifdef BRCM_FULLMAC
-#include <linux/netdevice.h>
-#endif
 #include <osl.h>
 #include <linux/module.h>
 #include <linux/pci.h>