Merge branch 'exynos-drm-next' of...

Merge branch 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next

Summary:
   - Add UHD support on TM2/TM2E boards.
     . adding interlace mode support and 297MHz pixel clock support
       for UHD mode, setting sysreg register in case of HW trigger mode,
       and adding SiI8620 MHL bridge device support.
   - Fix trigger mode issue on Rinato board.
     . On Rinato board, HW trigger mode doesn't work so fix it.
   - Some fixup and cleanup.

* 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
  drm/exynos: fimd: Do not use HW trigger for exynos3250
  drm/exynos/hdmi: add bridge support
  drm/exynos/decon5433: signal vblank only on odd fields
  drm/exynos/decon5433: add support for interlace modes
  drm/exynos/hdmi: fix PLL for 27MHz settings
  drm/exynos/hdmi: fix VSI infoframe registers
  drm/exynos/hdmi: add 297MHz pixel clock support
  drm/exynos: g2d: change platform driver name to 'exynos-drm-g2d'
  drm/exynos/decon5433: configure sysreg in case of hardware trigger

drivers/gpu/drm/exynos/exynos5433_drm_decon.c

@@ -13,9 +13,11 @@
 #include <linux/platform_device.h>
 #include <linux/clk.h>
 #include <linux/component.h>
+#include <linux/mfd/syscon.h>
 #include <linux/of_device.h>
 #include <linux/of_gpio.h>
 #include <linux/pm_runtime.h>
+#include <linux/regmap.h>
 
 #include <video/exynos5433_decon.h>
 
@@ -25,6 +27,9 @@
 #include "exynos_drm_plane.h"
 #include "exynos_drm_iommu.h"
 
+#define DSD_CFG_MUX 0x1004
+#define DSD_CFG_MUX_TE_UNMASK_GLOBAL BIT(13)
+
 #define WINDOWS_NR	3
 #define MIN_FB_WIDTH_FOR_16WORD_BURST	128
 
@@ -57,6 +62,7 @@ struct decon_context {
 	struct exynos_drm_plane		planes[WINDOWS_NR];
 	struct exynos_drm_plane_config	configs[WINDOWS_NR];
 	void __iomem			*addr;
+	struct regmap			*sysreg;
 	struct clk			*clks[ARRAY_SIZE(decon_clks_name)];
 	int				pipe;
 	unsigned long			flags;
@@ -118,18 +124,29 @@ static void decon_disable_vblank(struct exynos_drm_crtc *crtc)
 
 static void decon_setup_trigger(struct decon_context *ctx)
 {
-	u32 val = !(ctx->out_type & I80_HW_TRG)
-		? TRIGCON_TRIGEN_PER_F | TRIGCON_TRIGEN_F |
-		  TRIGCON_TE_AUTO_MASK | TRIGCON_SWTRIGEN
-		: TRIGCON_TRIGEN_PER_F | TRIGCON_TRIGEN_F |
-		  TRIGCON_HWTRIGMASK | TRIGCON_HWTRIGEN;
-	writel(val, ctx->addr + DECON_TRIGCON);
+	if (!(ctx->out_type & (IFTYPE_I80 | I80_HW_TRG)))
+		return;
+
+	if (!(ctx->out_type & I80_HW_TRG)) {
+		writel(TRIGCON_TE_AUTO_MASK | TRIGCON_SWTRIGEN
+		       | TRIGCON_TE_AUTO_MASK | TRIGCON_SWTRIGEN,
+		       ctx->addr + DECON_TRIGCON);
+		return;
+	}
+
+	writel(TRIGCON_TRIGEN_PER_F | TRIGCON_TRIGEN_F | TRIGCON_HWTRIGMASK
+	       | TRIGCON_HWTRIGEN, ctx->addr + DECON_TRIGCON);
+
+	if (regmap_update_bits(ctx->sysreg, DSD_CFG_MUX,
+			       DSD_CFG_MUX_TE_UNMASK_GLOBAL, ~0))
+		DRM_ERROR("Cannot update sysreg.\n");
 }
 
 static void decon_commit(struct exynos_drm_crtc *crtc)
 {
 	struct decon_context *ctx = crtc->ctx;
 	struct drm_display_mode *m = &crtc->base.mode;
+	bool interlaced = false;
 	u32 val;
 
 	if (test_bit(BIT_SUSPENDED, &ctx->flags))
@@ -140,13 +157,16 @@ static void decon_commit(struct exynos_drm_crtc *crtc)
 		m->crtc_hsync_end = m->crtc_htotal - 92;
 		m->crtc_vsync_start = m->crtc_vdisplay + 1;
 		m->crtc_vsync_end = m->crtc_vsync_start + 1;
+		if (m->flags & DRM_MODE_FLAG_INTERLACE)
+			interlaced = true;
 	}
 
-	if (ctx->out_type & (IFTYPE_I80 | I80_HW_TRG))
-		decon_setup_trigger(ctx);
+	decon_setup_trigger(ctx);
 
 	/* lcd on and use command if */
 	val = VIDOUT_LCD_ON;
+	if (interlaced)
+		val |= VIDOUT_INTERLACE_EN_F;
 	if (ctx->out_type & IFTYPE_I80) {
 		val |= VIDOUT_COMMAND_IF;
 	} else {
@@ -155,15 +175,21 @@ static void decon_commit(struct exynos_drm_crtc *crtc)
 
 	writel(val, ctx->addr + DECON_VIDOUTCON0);
 
-	val = VIDTCON2_LINEVAL(m->vdisplay - 1) |
-		VIDTCON2_HOZVAL(m->hdisplay - 1);
+	if (interlaced)
+		val = VIDTCON2_LINEVAL(m->vdisplay / 2 - 1) |
+			VIDTCON2_HOZVAL(m->hdisplay - 1);
+	else
+		val = VIDTCON2_LINEVAL(m->vdisplay - 1) |
+			VIDTCON2_HOZVAL(m->hdisplay - 1);
 	writel(val, ctx->addr + DECON_VIDTCON2);
 
 	if (!(ctx->out_type & IFTYPE_I80)) {
-		val = VIDTCON00_VBPD_F(
-				m->crtc_vtotal - m->crtc_vsync_end - 1) |
-			VIDTCON00_VFPD_F(
-				m->crtc_vsync_start - m->crtc_vdisplay - 1);
+		int vbp = m->crtc_vtotal - m->crtc_vsync_end;
+		int vfp = m->crtc_vsync_start - m->crtc_vdisplay;
+
+		if (interlaced)
+			vbp = vbp / 2 - 1;
+		val = VIDTCON00_VBPD_F(vbp - 1) | VIDTCON00_VFPD_F(vfp - 1);
 		writel(val, ctx->addr + DECON_VIDTCON00);
 
 		val = VIDTCON01_VSPW_F(
@@ -278,12 +304,22 @@ static void decon_update_plane(struct exynos_drm_crtc *crtc,
 	if (test_bit(BIT_SUSPENDED, &ctx->flags))
 		return;
 
-	val = COORDINATE_X(state->crtc.x) | COORDINATE_Y(state->crtc.y);
-	writel(val, ctx->addr + DECON_VIDOSDxA(win));
+	if (crtc->base.mode.flags & DRM_MODE_FLAG_INTERLACE) {
+		val = COORDINATE_X(state->crtc.x) |
+			COORDINATE_Y(state->crtc.y / 2);
+		writel(val, ctx->addr + DECON_VIDOSDxA(win));
+
+		val = COORDINATE_X(state->crtc.x + state->crtc.w - 1) |
+			COORDINATE_Y((state->crtc.y + state->crtc.h) / 2 - 1);
+		writel(val, ctx->addr + DECON_VIDOSDxB(win));
+	} else {
+		val = COORDINATE_X(state->crtc.x) | COORDINATE_Y(state->crtc.y);
+		writel(val, ctx->addr + DECON_VIDOSDxA(win));
 
-	val = COORDINATE_X(state->crtc.x + state->crtc.w - 1) |
-		COORDINATE_Y(state->crtc.y + state->crtc.h - 1);
-	writel(val, ctx->addr + DECON_VIDOSDxB(win));
+		val = COORDINATE_X(state->crtc.x + state->crtc.w - 1) |
+				COORDINATE_Y(state->crtc.y + state->crtc.h - 1);
+		writel(val, ctx->addr + DECON_VIDOSDxB(win));
+	}
 
 	val = VIDOSD_Wx_ALPHA_R_F(0x0) | VIDOSD_Wx_ALPHA_G_F(0x0) |
 		VIDOSD_Wx_ALPHA_B_F(0x0);
@@ -355,8 +391,6 @@ static void decon_swreset(struct decon_context *ctx)
 		udelay(10);
 	}
 
-	WARN(tries == 0, "failed to disable DECON\n");
-
 	writel(VIDCON0_SWRESET, ctx->addr + DECON_VIDCON0);
 	for (tries = 2000; tries; --tries) {
 		if (~readl(ctx->addr + DECON_VIDCON0) & VIDCON0_SWRESET)
@@ -557,6 +591,13 @@ static irqreturn_t decon_irq_handler(int irq, void *dev_id)
 
 	if (val) {
 		writel(val, ctx->addr + DECON_VIDINTCON1);
+		if (ctx->out_type & IFTYPE_HDMI) {
+			val = readl(ctx->addr + DECON_VIDOUTCON0);
+			val &= VIDOUT_INTERLACE_EN_F | VIDOUT_INTERLACE_FIELD_F;
+			if (val ==
+			    (VIDOUT_INTERLACE_EN_F | VIDOUT_INTERLACE_FIELD_F))
+				return IRQ_HANDLED;
+		}
 		drm_crtc_handle_vblank(&ctx->crtc->base);
 	}
 
@@ -637,6 +678,15 @@ static int exynos5433_decon_probe(struct platform_device *pdev)
 		ctx->out_type |= IFTYPE_I80;
 	}
 
+	if (ctx->out_type | I80_HW_TRG) {
+		ctx->sysreg = syscon_regmap_lookup_by_phandle(dev->of_node,
+							"samsung,disp-sysreg");
+		if (IS_ERR(ctx->sysreg)) {
+			dev_err(dev, "failed to get system register\n");
+			return PTR_ERR(ctx->sysreg);
+		}
+	}
+
 	for (i = 0; i < ARRAY_SIZE(decon_clks_name); i++) {
 		struct clk *clk;
 

drivers/gpu/drm/exynos/exynos_drm_fimd.c

@@ -125,10 +125,8 @@ static struct fimd_driver_data exynos3_fimd_driver_data = {
 	.timing_base = 0x20000,
 	.lcdblk_offset = 0x210,
 	.lcdblk_bypass_shift = 1,
-	.trg_type = I80_HW_TRG,
 	.has_shadowcon = 1,
 	.has_vidoutcon = 1,
-	.has_trigger_per_te = 1,
 };
 
 static struct fimd_driver_data exynos4_fimd_driver_data = {

drivers/gpu/drm/exynos/exynos_drm_g2d.c

@@ -1683,7 +1683,7 @@ struct platform_driver g2d_driver = {
 	.probe		= g2d_probe,
 	.remove		= g2d_remove,
 	.driver		= {
-		.name	= "s5p-g2d",
+		.name	= "exynos-drm-g2d",
 		.owner	= THIS_MODULE,
 		.pm	= &g2d_pm_ops,
 		.of_match_table = exynos_g2d_match,

drivers/gpu/drm/exynos/exynos_hdmi.c

@@ -35,6 +35,7 @@
 #include <linux/io.h>
 #include <linux/of_address.h>
 #include <linux/of_device.h>
+#include <linux/of_graph.h>
 #include <linux/hdmi.h>
 #include <linux/component.h>
 #include <linux/mfd/syscon.h>
@@ -133,6 +134,7 @@ struct hdmi_context {
 	struct regulator_bulk_data	regul_bulk[ARRAY_SIZE(supply)];
 	struct regulator		*reg_hdmi_en;
 	struct exynos_drm_clk		phy_clk;
+	struct drm_bridge		*bridge;
 };
 
 static inline struct hdmi_context *encoder_to_hdmi(struct drm_encoder *e)
@@ -509,9 +511,9 @@ static const struct hdmiphy_config hdmiphy_5433_configs[] = {
 	{
 		.pixel_clock = 27000000,
 		.conf = {
-			0x01, 0x51, 0x22, 0x51, 0x08, 0xfc, 0x88, 0x46,
-			0x72, 0x50, 0x24, 0x0c, 0x24, 0x0f, 0x7c, 0xa5,
-			0xd4, 0x2b, 0x87, 0x00, 0x00, 0x04, 0x00, 0x30,
+			0x01, 0x51, 0x2d, 0x75, 0x01, 0x00, 0x88, 0x02,
+			0x72, 0x50, 0x44, 0x8c, 0x27, 0x00, 0x7c, 0xac,
+			0xd6, 0x2b, 0x67, 0x00, 0x00, 0x04, 0x00, 0x30,
 			0x08, 0x10, 0x01, 0x01, 0x48, 0x40, 0x00, 0x40,
 		},
 	},
@@ -519,9 +521,9 @@ static const struct hdmiphy_config hdmiphy_5433_configs[] = {
 		.pixel_clock = 27027000,
 		.conf = {
 			0x01, 0x51, 0x2d, 0x72, 0x64, 0x09, 0x88, 0xc3,
-			0x71, 0x50, 0x24, 0x14, 0x24, 0x0f, 0x7c, 0xa5,
-			0xd4, 0x2b, 0x87, 0x00, 0x00, 0x04, 0x00, 0x30,
-			0x28, 0x10, 0x01, 0x01, 0x48, 0x40, 0x00, 0x40,
+			0x71, 0x50, 0x44, 0x8c, 0x27, 0x00, 0x7c, 0xac,
+			0xd6, 0x2b, 0x67, 0x00, 0x00, 0x04, 0x00, 0x30,
+			0x08, 0x10, 0x01, 0x01, 0x48, 0x40, 0x00, 0x40,
 		},
 	},
 	{
@@ -587,6 +589,15 @@ static const struct hdmiphy_config hdmiphy_5433_configs[] = {
 			0x08, 0x10, 0x01, 0x01, 0x48, 0x4a, 0x00, 0x40,
 		},
 	},
+	{
+		.pixel_clock = 297000000,
+		.conf = {
+			0x01, 0x51, 0x3E, 0x05, 0x40, 0xF0, 0x88, 0xC2,
+			0x52, 0x53, 0x44, 0x8C, 0x27, 0x00, 0x7C, 0xAC,
+			0xD6, 0x2B, 0x67, 0x00, 0x00, 0x04, 0x00, 0x30,
+			0x08, 0x10, 0x01, 0x01, 0x48, 0x40, 0x00, 0x40,
+		},
+	},
 };
 
 static const char * const hdmi_clk_gates4[] = {
@@ -788,7 +799,8 @@ static void hdmi_reg_infoframes(struct hdmi_context *hdata)
 				sizeof(buf));
 	if (ret > 0) {
 		hdmi_reg_writeb(hdata, HDMI_VSI_CON, HDMI_VSI_CON_EVERY_VSYNC);
-		hdmi_reg_write_buf(hdata, HDMI_VSI_HEADER0, buf, ret);
+		hdmi_reg_write_buf(hdata, HDMI_VSI_HEADER0, buf, 3);
+		hdmi_reg_write_buf(hdata, HDMI_VSI_DATA(0), buf + 3, ret - 3);
 	}
 
 	ret = hdmi_audio_infoframe_init(&frm.audio);
@@ -912,7 +924,15 @@ static int hdmi_create_connector(struct drm_encoder *encoder)
 	drm_connector_register(connector);
 	drm_mode_connector_attach_encoder(connector, encoder);
 
-	return 0;
+	if (hdata->bridge) {
+		encoder->bridge = hdata->bridge;
+		hdata->bridge->encoder = encoder;
+		ret = drm_bridge_attach(encoder, hdata->bridge, NULL);
+		if (ret)
+			DRM_ERROR("Failed to attach bridge\n");
+	}
+
+	return ret;
 }
 
 static bool hdmi_mode_fixup(struct drm_encoder *encoder,
@@ -1581,6 +1601,31 @@ static void hdmiphy_clk_enable(struct exynos_drm_clk *clk, bool enable)
 		hdmiphy_disable(hdata);
 }
 
+static int hdmi_bridge_init(struct hdmi_context *hdata)
+{
+	struct device *dev = hdata->dev;
+	struct device_node *ep, *np;
+
+	ep = of_graph_get_endpoint_by_regs(dev->of_node, 1, -1);
+	if (!ep)
+		return 0;
+
+	np = of_graph_get_remote_port_parent(ep);
+	of_node_put(ep);
+	if (!np) {
+		DRM_ERROR("failed to get remote port parent");
+		return -EINVAL;
+	}
+
+	hdata->bridge = of_drm_find_bridge(np);
+	of_node_put(np);
+
+	if (!hdata->bridge)
+		return -EPROBE_DEFER;
+
+	return 0;
+}
+
 static int hdmi_resources_init(struct hdmi_context *hdata)
 {
 	struct device *dev = hdata->dev;
@@ -1620,17 +1665,18 @@ static int hdmi_resources_init(struct hdmi_context *hdata)
 
 	hdata->reg_hdmi_en = devm_regulator_get_optional(dev, "hdmi-en");
 
-	if (PTR_ERR(hdata->reg_hdmi_en) == -ENODEV)
-		return 0;
+	if (PTR_ERR(hdata->reg_hdmi_en) != -ENODEV) {
+		if (IS_ERR(hdata->reg_hdmi_en))
+			return PTR_ERR(hdata->reg_hdmi_en);
 
-	if (IS_ERR(hdata->reg_hdmi_en))
-		return PTR_ERR(hdata->reg_hdmi_en);
-
-	ret = regulator_enable(hdata->reg_hdmi_en);
-	if (ret)
-		DRM_ERROR("failed to enable hdmi-en regulator\n");
+		ret = regulator_enable(hdata->reg_hdmi_en);
+		if (ret) {
+			DRM_ERROR("failed to enable hdmi-en regulator\n");
+			return ret;
+		}
+	}
 
-	return ret;
+	return hdmi_bridge_init(hdata);
 }
 
 static struct of_device_id hdmi_match_types[] = {

include/video/exynos5433_decon.h

@@ -89,6 +89,8 @@
 #define VIDCON0_ENVID_F			(1 << 0)
 
 /* VIDOUTCON0 */
+#define VIDOUT_INTERLACE_FIELD_F	(1 << 29)
+#define VIDOUT_INTERLACE_EN_F		(1 << 28)
 #define VIDOUT_LCD_ON			(1 << 24)
 #define VIDOUT_IF_F_MASK		(0x3 << 20)
 #define VIDOUT_RGB_IF			(0x0 << 20)