Skip to content

L
linux
Commit f878fe56 authored by Florian Fainelli's avatar Florian Fainelli Committed by David S. Miller
Browse files
Options

net: phy: Prepare for moving Omega out of bcm7xxx 

The Omega PHY entry was added to bcm7xxx.c out of convenience and this
breaks the one driver per product line paradigm that was applied up
until now. Since the AFE initialization is shared between Omega and
BCM7xxx move the relevant functions to bcm-phy-lib.[ch]. No functional
changes introduced.
Signed-off-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Reviewed-by: default avatarScott Branden <scott.branden@broadcom.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 02afc7ad
Hide whitespace changes
Inline Side-by-side
Showing with 76 additions and 71 deletions
drivers/net/phy/bcm-phy-lib.c
View file @ f878fe56
...@@ -371,6 +371,58 @@ void bcm_phy_get_stats(struct phy_device *phydev, u64 *shadow, ...@@ -371,6 +371,58 @@ void bcm_phy_get_stats(struct phy_device *phydev, u64 *shadow,
} }
EXPORT_SYMBOL_GPL(bcm_phy_get_stats); EXPORT_SYMBOL_GPL(bcm_phy_get_stats);
void bcm_phy_r_rc_cal_reset(struct phy_device *phydev)
{
/* Reset R_CAL/RC_CAL Engine */
bcm_phy_write_exp_sel(phydev, 0x00b0, 0x0010);
/* Disable Reset R_AL/RC_CAL Engine */
bcm_phy_write_exp_sel(phydev, 0x00b0, 0x0000);
}
EXPORT_SYMBOL_GPL(bcm_phy_r_rc_cal_reset);
int bcm_phy_28nm_a0b0_afe_config_init(struct phy_device *phydev)
{
/* Increase VCO range to prevent unlocking problem of PLL at low
* temp
*/
bcm_phy_write_misc(phydev, PLL_PLLCTRL_1, 0x0048);
/* Change Ki to 011 */
bcm_phy_write_misc(phydev, PLL_PLLCTRL_2, 0x021b);
/* Disable loading of TVCO buffer to bandgap, set bandgap trim
* to 111
*/
bcm_phy_write_misc(phydev, PLL_PLLCTRL_4, 0x0e20);
/* Adjust bias current trim by -3 */
bcm_phy_write_misc(phydev, DSP_TAP10, 0x690b);
/* Switch to CORE_BASE1E */
phy_write(phydev, MII_BRCM_CORE_BASE1E, 0xd);
bcm_phy_r_rc_cal_reset(phydev);
/* write AFE_RXCONFIG_0 */
bcm_phy_write_misc(phydev, AFE_RXCONFIG_0, 0xeb19);
/* write AFE_RXCONFIG_1 */
bcm_phy_write_misc(phydev, AFE_RXCONFIG_1, 0x9a3f);
/* write AFE_RX_LP_COUNTER */
bcm_phy_write_misc(phydev, AFE_RX_LP_COUNTER, 0x7fc0);
/* write AFE_HPF_TRIM_OTHERS */
bcm_phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x000b);
/* write AFTE_TX_CONFIG */
bcm_phy_write_misc(phydev, AFE_TX_CONFIG, 0x0800);
return 0;
}
EXPORT_SYMBOL_GPL(bcm_phy_28nm_a0b0_afe_config_init);
MODULE_DESCRIPTION("Broadcom PHY Library"); MODULE_DESCRIPTION("Broadcom PHY Library");
MODULE_LICENSE("GPL v2"); MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Broadcom Corporation"); MODULE_AUTHOR("Broadcom Corporation");
drivers/net/phy/bcm-phy-lib.h
View file @ f878fe56
...@@ -9,6 +9,24 @@ ...@@ -9,6 +9,24 @@
#include <linux/brcmphy.h> #include <linux/brcmphy.h>
#include <linux/phy.h> #include <linux/phy.h>
/* 28nm only register definitions */
#define MISC_ADDR(base, channel) base, channel
#define DSP_TAP10 MISC_ADDR(0x0a, 0)
#define PLL_PLLCTRL_1 MISC_ADDR(0x32, 1)
#define PLL_PLLCTRL_2 MISC_ADDR(0x32, 2)
#define PLL_PLLCTRL_4 MISC_ADDR(0x33, 0)
#define AFE_RXCONFIG_0 MISC_ADDR(0x38, 0)
#define AFE_RXCONFIG_1 MISC_ADDR(0x38, 1)
#define AFE_RXCONFIG_2 MISC_ADDR(0x38, 2)
#define AFE_RX_LP_COUNTER MISC_ADDR(0x38, 3)
#define AFE_TX_CONFIG MISC_ADDR(0x39, 0)
#define AFE_VDCA_ICTRL_0 MISC_ADDR(0x39, 1)
#define AFE_VDAC_OTHERS_0 MISC_ADDR(0x39, 3)
#define AFE_HPF_TRIM_OTHERS MISC_ADDR(0x3a, 0)
int bcm_phy_write_exp(struct phy_device *phydev, u16 reg, u16 val); int bcm_phy_write_exp(struct phy_device *phydev, u16 reg, u16 val);
int bcm_phy_read_exp(struct phy_device *phydev, u16 reg); int bcm_phy_read_exp(struct phy_device *phydev, u16 reg);
...@@ -45,5 +63,7 @@ int bcm_phy_get_sset_count(struct phy_device *phydev); ...@@ -45,5 +63,7 @@ int bcm_phy_get_sset_count(struct phy_device *phydev);
void bcm_phy_get_strings(struct phy_device *phydev, u8 *data); void bcm_phy_get_strings(struct phy_device *phydev, u8 *data);
void bcm_phy_get_stats(struct phy_device *phydev, u64 *shadow, void bcm_phy_get_stats(struct phy_device *phydev, u64 *shadow,
struct ethtool_stats *stats, u64 *data); struct ethtool_stats *stats, u64 *data);
void bcm_phy_r_rc_cal_reset(struct phy_device *phydev);
int bcm_phy_28nm_a0b0_afe_config_init(struct phy_device *phydev);
#endif /* _LINUX_BCM_PHY_LIB_H */ #endif /* _LINUX_BCM_PHY_LIB_H */
drivers/net/phy/bcm7xxx.c
View file @ f878fe56
...@@ -37,77 +37,10 @@ ...@@ -37,77 +37,10 @@
#define MII_BCM7XXX_SHD_3_TL4 0x23 #define MII_BCM7XXX_SHD_3_TL4 0x23
#define MII_BCM7XXX_TL4_RST_MSK (BIT(2) | BIT(1)) #define MII_BCM7XXX_TL4_RST_MSK (BIT(2) | BIT(1))
/* 28nm only register definitions */
#define MISC_ADDR(base, channel) base, channel
#define DSP_TAP10 MISC_ADDR(0x0a, 0)
#define PLL_PLLCTRL_1 MISC_ADDR(0x32, 1)
#define PLL_PLLCTRL_2 MISC_ADDR(0x32, 2)
#define PLL_PLLCTRL_4 MISC_ADDR(0x33, 0)
#define AFE_RXCONFIG_0 MISC_ADDR(0x38, 0)
#define AFE_RXCONFIG_1 MISC_ADDR(0x38, 1)
#define AFE_RXCONFIG_2 MISC_ADDR(0x38, 2)
#define AFE_RX_LP_COUNTER MISC_ADDR(0x38, 3)
#define AFE_TX_CONFIG MISC_ADDR(0x39, 0)
#define AFE_VDCA_ICTRL_0 MISC_ADDR(0x39, 1)
#define AFE_VDAC_OTHERS_0 MISC_ADDR(0x39, 3)
#define AFE_HPF_TRIM_OTHERS MISC_ADDR(0x3a, 0)
struct bcm7xxx_phy_priv { struct bcm7xxx_phy_priv {
u64 *stats; u64 *stats;
}; };
static void r_rc_cal_reset(struct phy_device *phydev)
{
/* Reset R_CAL/RC_CAL Engine */
bcm_phy_write_exp_sel(phydev, 0x00b0, 0x0010);
/* Disable Reset R_AL/RC_CAL Engine */
bcm_phy_write_exp_sel(phydev, 0x00b0, 0x0000);
}
static int bcm7xxx_28nm_b0_afe_config_init(struct phy_device *phydev)
{
/* Increase VCO range to prevent unlocking problem of PLL at low
* temp
*/
bcm_phy_write_misc(phydev, PLL_PLLCTRL_1, 0x0048);
/* Change Ki to 011 */
bcm_phy_write_misc(phydev, PLL_PLLCTRL_2, 0x021b);
/* Disable loading of TVCO buffer to bandgap, set bandgap trim
* to 111
*/
bcm_phy_write_misc(phydev, PLL_PLLCTRL_4, 0x0e20);
/* Adjust bias current trim by -3 */
bcm_phy_write_misc(phydev, DSP_TAP10, 0x690b);
/* Switch to CORE_BASE1E */
phy_write(phydev, MII_BRCM_CORE_BASE1E, 0xd);
r_rc_cal_reset(phydev);
/* write AFE_RXCONFIG_0 */
bcm_phy_write_misc(phydev, AFE_RXCONFIG_0, 0xeb19);
/* write AFE_RXCONFIG_1 */
bcm_phy_write_misc(phydev, AFE_RXCONFIG_1, 0x9a3f);
/* write AFE_RX_LP_COUNTER */
bcm_phy_write_misc(phydev, AFE_RX_LP_COUNTER, 0x7fc0);
/* write AFE_HPF_TRIM_OTHERS */
bcm_phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x000b);
/* write AFTE_TX_CONFIG */
bcm_phy_write_misc(phydev, AFE_TX_CONFIG, 0x0800);
return 0;
}
static int bcm7xxx_28nm_d0_afe_config_init(struct phy_device *phydev) static int bcm7xxx_28nm_d0_afe_config_init(struct phy_device *phydev)
{ {
/* AFE_RXCONFIG_0 */ /* AFE_RXCONFIG_0 */
...@@ -143,7 +76,7 @@ static int bcm7xxx_28nm_d0_afe_config_init(struct phy_device *phydev) ...@@ -143,7 +76,7 @@ static int bcm7xxx_28nm_d0_afe_config_init(struct phy_device *phydev)
bcm_phy_write_misc(phydev, DSP_TAP10, 0x011b); bcm_phy_write_misc(phydev, DSP_TAP10, 0x011b);
/* Reset R_CAL/RC_CAL engine */ /* Reset R_CAL/RC_CAL engine */
r_rc_cal_reset(phydev); bcm_phy_r_rc_cal_reset(phydev);
return 0; return 0;
} }
...@@ -171,7 +104,7 @@ static int bcm7xxx_28nm_e0_plus_afe_config_init(struct phy_device *phydev) ...@@ -171,7 +104,7 @@ static int bcm7xxx_28nm_e0_plus_afe_config_init(struct phy_device *phydev)
bcm_phy_write_misc(phydev, DSP_TAP10, 0x011b); bcm_phy_write_misc(phydev, DSP_TAP10, 0x011b);
/* Reset R_CAL/RC_CAL engine */ /* Reset R_CAL/RC_CAL engine */
r_rc_cal_reset(phydev); bcm_phy_r_rc_cal_reset(phydev);
return 0; return 0;
} }
...@@ -196,7 +129,7 @@ static int bcm7xxx_28nm_a0_patch_afe_config_init(struct phy_device *phydev) ...@@ -196,7 +129,7 @@ static int bcm7xxx_28nm_a0_patch_afe_config_init(struct phy_device *phydev)
/* Enable ffe zero detection for Vitesse interoperability */ /* Enable ffe zero detection for Vitesse interoperability */
bcm_phy_write_misc(phydev, 0x26, 0x2, 0x0015); bcm_phy_write_misc(phydev, 0x26, 0x2, 0x0015);
r_rc_cal_reset(phydev); bcm_phy_r_rc_cal_reset(phydev);
return 0; return 0;
} }
...@@ -227,7 +160,7 @@ static int bcm7xxx_28nm_config_init(struct phy_device *phydev) ...@@ -227,7 +160,7 @@ static int bcm7xxx_28nm_config_init(struct phy_device *phydev)
switch (rev) { switch (rev) {
case 0xa0: case 0xa0:
case 0xb0: case 0xb0:
ret = bcm7xxx_28nm_b0_afe_config_init(phydev); ret = bcm_phy_28nm_a0b0_afe_config_init(phydev);
break; break;
case 0xd0: case 0xd0:
ret = bcm7xxx_28nm_d0_afe_config_init(phydev); ret = bcm7xxx_28nm_d0_afe_config_init(phydev);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7