[SCSI] lpfc: Removed obsolete fcp_eq_count and fcp_wq_count driver attributes

Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

drivers/scsi/lpfc/lpfc.h

@@ -711,8 +711,6 @@ struct lpfc_hba {
 	uint32_t cfg_use_msi;
 	uint32_t cfg_fcp_imax;
 	uint32_t cfg_fcp_cpu_map;
-	uint32_t cfg_fcp_wq_count;
-	uint32_t cfg_fcp_eq_count;
 	uint32_t cfg_fcp_io_channel;
 	uint32_t cfg_total_seg_cnt;
 	uint32_t cfg_sg_seg_cnt;

drivers/scsi/lpfc/lpfc_attr.c

@@ -4120,25 +4120,6 @@ LPFC_ATTR_RW(poll_tmo, 10, 1, 255,
 LPFC_ATTR_R(use_msi, 2, 0, 2, "Use Message Signaled Interrupts (1) or "
 	    "MSI-X (2), if possible");
 
-/*
-# lpfc_fcp_wq_count: Set the number of fast-path FCP work queues
-# This parameter is ignored and will eventually be depricated
-#
-# Value range is [1,7]. Default value is 4.
-*/
-LPFC_ATTR_R(fcp_wq_count, LPFC_FCP_IO_CHAN_DEF, LPFC_FCP_IO_CHAN_MIN,
-	    LPFC_FCP_IO_CHAN_MAX,
-	    "Set the number of fast-path FCP work queues, if possible");
-
-/*
-# lpfc_fcp_eq_count: Set the number of FCP EQ/CQ/WQ IO channels
-#
-# Value range is [1,7]. Default value is 4.
-*/
-LPFC_ATTR_R(fcp_eq_count, LPFC_FCP_IO_CHAN_DEF, LPFC_FCP_IO_CHAN_MIN,
-	    LPFC_FCP_IO_CHAN_MAX,
-	    "Set the number of fast-path FCP event queues, if possible");
-
 /*
 # lpfc_fcp_io_channel: Set the number of FCP EQ/CQ/WQ IO channels
 #
@@ -4317,8 +4298,6 @@ struct device_attribute *lpfc_hba_attrs[] = {
 	&dev_attr_lpfc_use_msi,
 	&dev_attr_lpfc_fcp_imax,
 	&dev_attr_lpfc_fcp_cpu_map,
-	&dev_attr_lpfc_fcp_wq_count,
-	&dev_attr_lpfc_fcp_eq_count,
 	&dev_attr_lpfc_fcp_io_channel,
 	&dev_attr_lpfc_enable_bg,
 	&dev_attr_lpfc_soft_wwnn,
@@ -5301,8 +5280,6 @@ lpfc_get_cfgparam(struct lpfc_hba *phba)
 	lpfc_use_msi_init(phba, lpfc_use_msi);
 	lpfc_fcp_imax_init(phba, lpfc_fcp_imax);
 	lpfc_fcp_cpu_map_init(phba, lpfc_fcp_cpu_map);
-	lpfc_fcp_wq_count_init(phba, lpfc_fcp_wq_count);
-	lpfc_fcp_eq_count_init(phba, lpfc_fcp_eq_count);
 	lpfc_fcp_io_channel_init(phba, lpfc_fcp_io_channel);
 	lpfc_enable_hba_reset_init(phba, lpfc_enable_hba_reset);
 	lpfc_enable_hba_heartbeat_init(phba, lpfc_enable_hba_heartbeat);

drivers/scsi/lpfc/lpfc_init.c

@@ -4913,9 +4913,6 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba)
 	lpfc_get_cfgparam(phba);
 	phba->max_vpi = LPFC_MAX_VPI;
 
-	/* Eventually cfg_fcp_eq_count / cfg_fcp_wq_count will be depricated */
-	phba->cfg_fcp_io_channel = phba->cfg_fcp_eq_count;
-
 	/* This will be set to correct value after the read_config mbox */
 	phba->max_vports = 0;
 
@@ -6873,11 +6870,7 @@ lpfc_sli4_queue_verify(struct lpfc_hba *phba)
 		cfg_fcp_io_channel = phba->sli4_hba.max_cfg_param.max_eq;
 	}
 
-	/* Eventually cfg_fcp_eq_count / cfg_fcp_wq_count will be depricated */
-
 	/* The actual number of FCP event queues adopted */
-	phba->cfg_fcp_eq_count = cfg_fcp_io_channel;
-	phba->cfg_fcp_wq_count = cfg_fcp_io_channel;
 	phba->cfg_fcp_io_channel = cfg_fcp_io_channel;
 
 	/* Get EQ depth from module parameter, fake the default for now */