[SCSI] qlogicpti: use request_firmware

Firmware blob is little endian

Thanks to Stephen Rothwell for fixing typos
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>

drivers/scsi/qlogicpti.c

@@ -28,6 +28,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
+#include <linux/firmware.h>
 
 #include <asm/byteorder.h>
 
@@ -53,8 +54,6 @@
 
 #define DEFAULT_LOOP_COUNT	10000
 
-#include "qlogicpti_asm.c"
-
 static struct qlogicpti *qptichain = NULL;
 static DEFINE_SPINLOCK(qptichain_lock);
 
@@ -465,16 +464,32 @@ static int qlogicpti_reset_hardware(struct Scsi_Host *host)
 
 static int __devinit qlogicpti_load_firmware(struct qlogicpti *qpti)
 {
+	const struct firmware *fw;
+	const char fwname[] = "qlogic/isp1000.bin";
+	const __le16 *fw_data;
 	struct Scsi_Host *host = qpti->qhost;
 	unsigned short csum = 0;
 	unsigned short param[6];
-	unsigned short *risc_code, risc_code_addr, risc_code_length;
+	unsigned short risc_code_addr, risc_code_length;
+	int err;
 	unsigned long flags;
 	int i, timeout;
 
-	risc_code = &sbus_risc_code01[0];
+	err = request_firmware(&fw, fwname, &qpti->op->dev);
+	if (err) {
+		printk(KERN_ERR "Failed to load image \"%s\" err %d\n",
+		       fwname, err);
+		return err;
+	}
+	if (fw->size % 2) {
+		printk(KERN_ERR "Bogus length %zu in image \"%s\"\n",
+		       fw->size, fwname);
+		err = -EINVAL;
+		goto outfirm;
+	}
+	fw_data = (const __le16 *)&fw->data[0];
 	risc_code_addr = 0x1000;	/* all f/w modules load at 0x1000 */
-	risc_code_length = sbus_risc_code_length01;
+	risc_code_length = fw->size / 2;
 
 	spin_lock_irqsave(host->host_lock, flags);
 
@@ -482,12 +497,12 @@ static int __devinit qlogicpti_load_firmware(struct qlogicpti *qpti)
 	 * afterwards via the mailbox commands.
 	 */
 	for (i = 0; i < risc_code_length; i++)
-		csum += risc_code[i];
+		csum += __le16_to_cpu(fw_data[i]);
 	if (csum) {
-		spin_unlock_irqrestore(host->host_lock, flags);
 		printk(KERN_EMERG "qlogicpti%d: Aieee, firmware checksum failed!",
 		       qpti->qpti_id);
-		return 1;
+		err = 1;
+		goto out;
 	}		
 	sbus_writew(SBUS_CTRL_RESET, qpti->qregs + SBUS_CTRL);
 	sbus_writew((DMA_CTRL_CCLEAR | DMA_CTRL_CIRQ), qpti->qregs + CMD_DMA_CTRL);
@@ -496,9 +511,9 @@ static int __devinit qlogicpti_load_firmware(struct qlogicpti *qpti)
 	while (--timeout && (sbus_readw(qpti->qregs + SBUS_CTRL) & SBUS_CTRL_RESET))
 		udelay(20);
 	if (!timeout) {
-		spin_unlock_irqrestore(host->host_lock, flags);
 		printk(KERN_EMERG "qlogicpti%d: Cannot reset the ISP.", qpti->qpti_id);
-		return 1;
+		err = 1;
+		goto out;
 	}
 
 	sbus_writew(HCCTRL_RESET, qpti->qregs + HCCTRL);
@@ -536,21 +551,21 @@ static int __devinit qlogicpti_load_firmware(struct qlogicpti *qpti)
 	if (qlogicpti_mbox_command(qpti, param, 1)) {
 		printk(KERN_EMERG "qlogicpti%d: Cannot stop firmware for reload.\n",
 		       qpti->qpti_id);
-		spin_unlock_irqrestore(host->host_lock, flags);
-		return 1;
+		err = 1;
+		goto out;
 	}		
 
 	/* Load it up.. */
 	for (i = 0; i < risc_code_length; i++) {
 		param[0] = MBOX_WRITE_RAM_WORD;
 		param[1] = risc_code_addr + i;
-		param[2] = risc_code[i];
+		param[2] = __le16_to_cpu(fw_data[i]);
 		if (qlogicpti_mbox_command(qpti, param, 1) ||
 		    param[0] != MBOX_COMMAND_COMPLETE) {
 			printk("qlogicpti%d: Firmware dload failed, I'm bolixed!\n",
 			       qpti->qpti_id);
-			spin_unlock_irqrestore(host->host_lock, flags);
-			return 1;
+			err = 1;
+			goto out;
 		}
 	}
 
@@ -569,8 +584,8 @@ static int __devinit qlogicpti_load_firmware(struct qlogicpti *qpti)
 	    (param[0] != MBOX_COMMAND_COMPLETE)) {
 		printk(KERN_EMERG "qlogicpti%d: New firmware csum failure!\n",
 		       qpti->qpti_id);
-		spin_unlock_irqrestore(host->host_lock, flags);
-		return 1;
+		err = 1;
+		goto out;
 	}
 
 	/* Start using newly downloaded firmware. */
@@ -583,8 +598,8 @@ static int __devinit qlogicpti_load_firmware(struct qlogicpti *qpti)
 	    (param[0] != MBOX_COMMAND_COMPLETE)) {
 		printk(KERN_EMERG "qlogicpti%d: AboutFirmware cmd fails.\n",
 		       qpti->qpti_id);
-		spin_unlock_irqrestore(host->host_lock, flags);
-		return 1;
+		err = 1;
+		goto out;
 	}
 
 	/* Snag the major and minor revisions from the result. */
@@ -599,8 +614,8 @@ static int __devinit qlogicpti_load_firmware(struct qlogicpti *qpti)
 	    (param[0] != MBOX_COMMAND_COMPLETE)) {
 		printk(KERN_EMERG "qlogicpti%d: could not set clock rate.\n",
 		       qpti->qpti_id);
-		spin_unlock_irqrestore(host->host_lock, flags);
-		return 1;
+		err = 1;
+		goto out;
 	}
 
 	if (qpti->is_pti != 0) {
@@ -616,8 +631,11 @@ static int __devinit qlogicpti_load_firmware(struct qlogicpti *qpti)
 		qlogicpti_mbox_command(qpti, param, 1);
 	}
 
+out:
 	spin_unlock_irqrestore(host->host_lock, flags);
-	return 0;
+outfirm:
+	release_firmware(fw);
+	return err;
 }
 
 static int qlogicpti_verify_tmon(struct qlogicpti *qpti)
@@ -1458,6 +1476,7 @@ MODULE_DESCRIPTION("QlogicISP SBUS driver");
 MODULE_AUTHOR("David S. Miller (davem@davemloft.net)");
 MODULE_LICENSE("GPL");
 MODULE_VERSION("2.1");
+MODULE_FIRMWARE("qlogic/isp1000.bin");
 
 module_init(qpti_init);
 module_exit(qpti_exit);

firmware/Makefile

@@ -45,6 +45,7 @@ fw-shipped-$(CONFIG_SCSI_ADVANSYS) += advansys/mcode.bin advansys/38C1600.bin \
 				      advansys/3550.bin advansys/38C0800.bin
 fw-shipped-$(CONFIG_SCSI_QLOGIC_1280) += qlogic/1040.bin qlogic/1280.bin \
 					 qlogic/12160.bin
+fw-shipped-$(CONFIG_SCSI_QLOGICPTI) += qlogic/isp1000.bin
 fw-shipped-$(CONFIG_SMCTR) += tr_smctr.bin
 fw-shipped-$(CONFIG_SND_KORG1212) += korg/k1212.dsp
 fw-shipped-$(CONFIG_SND_MAESTRO3) += ess/maestro3_assp_kernel.fw \

firmware/WHENCE

@@ -569,3 +569,13 @@ Licence: Allegedly GPL, but no source visible. Marked:
 Found in hex form in kernel source.
 
 --------------------------------------------------------------------------
+
+Driver: SCSI_QLOGICPTI - PTI Qlogic, ISP Driver
+
+File: qlogic/isp1000.bin
+
+Licence: Unknown
+
+Found in hex form in kernel source.
+
+--------------------------------------------------------------------------