Commit f8a15f97 authored by Eugeniy Paltsev's avatar Eugeniy Paltsev Committed by Vineet Gupta

ARCv2: lib: memcpy: fix doing prefetchw outside of buffer

ARCv2 optimized memcpy uses PREFETCHW instruction for prefetching the
next cache line but doesn't ensure that the line is not past the end of
the buffer. PRETECHW changes the line ownership and marks it dirty,
which can cause data corruption if this area is used for DMA IO.

Fix the issue by avoiding the PREFETCHW. This leads to performance
degradation but it is OK as we'll introduce new memcpy implementation
optimized for unaligned memory access using.

We also cut off all PREFETCH instructions at they are quite useless
here:
 * we call PREFETCH right before LOAD instruction call.
 * we copy 16 or 32 bytes of data (depending on CONFIG_ARC_HAS_LL64)
   in a main logical loop. so we call PREFETCH 4 times (or 2 times)
   for each L1 cache line (in case of 64B L1 cache Line which is
   default case). Obviously this is not optimal.
Signed-off-by: default avatarEugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: default avatarVineet Gupta <vgupta@synopsys.com>
parent 252f6e8e
......@@ -25,15 +25,11 @@
#endif
#ifdef CONFIG_ARC_HAS_LL64
# define PREFETCH_READ(RX) prefetch [RX, 56]
# define PREFETCH_WRITE(RX) prefetchw [RX, 64]
# define LOADX(DST,RX) ldd.ab DST, [RX, 8]
# define STOREX(SRC,RX) std.ab SRC, [RX, 8]
# define ZOLSHFT 5
# define ZOLAND 0x1F
#else
# define PREFETCH_READ(RX) prefetch [RX, 28]
# define PREFETCH_WRITE(RX) prefetchw [RX, 32]
# define LOADX(DST,RX) ld.ab DST, [RX, 4]
# define STOREX(SRC,RX) st.ab SRC, [RX, 4]
# define ZOLSHFT 4
......@@ -41,8 +37,6 @@
#endif
ENTRY_CFI(memcpy)
prefetch [r1] ; Prefetch the read location
prefetchw [r0] ; Prefetch the write location
mov.f 0, r2
;;; if size is zero
jz.d [blink]
......@@ -72,8 +66,6 @@ ENTRY_CFI(memcpy)
lpnz @.Lcopy32_64bytes
;; LOOP START
LOADX (r6, r1)
PREFETCH_READ (r1)
PREFETCH_WRITE (r3)
LOADX (r8, r1)
LOADX (r10, r1)
LOADX (r4, r1)
......@@ -117,9 +109,7 @@ ENTRY_CFI(memcpy)
lpnz @.Lcopy8bytes_1
;; LOOP START
ld.ab r6, [r1, 4]
prefetch [r1, 28] ;Prefetch the next read location
ld.ab r8, [r1,4]
prefetchw [r3, 32] ;Prefetch the next write location
SHIFT_1 (r7, r6, 24)
or r7, r7, r5
......@@ -162,9 +152,7 @@ ENTRY_CFI(memcpy)
lpnz @.Lcopy8bytes_2
;; LOOP START
ld.ab r6, [r1, 4]
prefetch [r1, 28] ;Prefetch the next read location
ld.ab r8, [r1,4]
prefetchw [r3, 32] ;Prefetch the next write location
SHIFT_1 (r7, r6, 16)
or r7, r7, r5
......@@ -204,9 +192,7 @@ ENTRY_CFI(memcpy)
lpnz @.Lcopy8bytes_3
;; LOOP START
ld.ab r6, [r1, 4]
prefetch [r1, 28] ;Prefetch the next read location
ld.ab r8, [r1,4]
prefetchw [r3, 32] ;Prefetch the next write location
SHIFT_1 (r7, r6, 8)
or r7, r7, r5
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment