OMAP: DSS2: Move panel-generic-dpi.h to include/video/

arch/arm/plat-omap/include/plat/panel-generic-dpi.h is an include for
the OMAP DSS panel driver for generic DPI displays. A more logical place
for it is in include/video.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

arch/arm/mach-omap2/board-3430sdp.c

@@ -38,7 +38,7 @@
 #include <plat/dma.h>
 #include <plat/gpmc.h>
 #include <video/omapdss.h>
-#include <plat/panel-generic-dpi.h>
+#include <video/omap-panel-generic-dpi.h>
 
 #include <plat/gpmc-smc91x.h>
 

arch/arm/mach-omap2/board-am3517evm.c

@@ -35,7 +35,7 @@
 #include <plat/common.h>
 #include <plat/usb.h>
 #include <video/omapdss.h>
-#include <plat/panel-generic-dpi.h>
+#include <video/omap-panel-generic-dpi.h>
 
 #include "mux.h"
 #include "control.h"

arch/arm/mach-omap2/board-cm-t35.c

@@ -46,7 +46,7 @@
 #include <plat/gpmc.h>
 #include <plat/usb.h>
 #include <video/omapdss.h>
-#include <plat/panel-generic-dpi.h>
+#include <video/omap-panel-generic-dpi.h>
 #include <plat/mcspi.h>
 
 #include <mach/hardware.h>

arch/arm/mach-omap2/board-devkit8000.c

@@ -46,7 +46,7 @@
 #include <plat/nand.h>
 #include <plat/usb.h>
 #include <video/omapdss.h>
-#include <plat/panel-generic-dpi.h>
+#include <video/omap-panel-generic-dpi.h>
 
 #include <plat/mcspi.h>
 #include <linux/input/matrix_keypad.h>

arch/arm/mach-omap2/board-igep0020.c

@@ -32,7 +32,7 @@
 #include <plat/gpmc.h>
 #include <plat/usb.h>
 #include <video/omapdss.h>
-#include <plat/panel-generic-dpi.h>
+#include <video/omap-panel-generic-dpi.h>
 #include <plat/onenand.h>
 
 #include "mux.h"

arch/arm/mach-omap2/board-omap3beagle.c

@@ -42,7 +42,7 @@
 #include <plat/board.h>
 #include <plat/common.h>
 #include <video/omapdss.h>
-#include <plat/panel-generic-dpi.h>
+#include <video/omap-panel-generic-dpi.h>
 #include <plat/gpmc.h>
 #include <plat/nand.h>
 #include <plat/usb.h>

arch/arm/mach-omap2/board-omap3evm.c

@@ -45,7 +45,7 @@
 #include <plat/common.h>
 #include <plat/mcspi.h>
 #include <video/omapdss.h>
-#include <plat/panel-generic-dpi.h>
+#include <video/omap-panel-generic-dpi.h>
 
 #include "mux.h"
 #include "sdram-micron-mt46h32m32lf-6.h"

arch/arm/mach-omap2/board-omap3stalker.c

@@ -40,7 +40,7 @@
 #include <plat/nand.h>
 #include <plat/usb.h>
 #include <video/omapdss.h>
-#include <plat/panel-generic-dpi.h>
+#include <video/omap-panel-generic-dpi.h>
 
 #include <plat/mcspi.h>
 #include <linux/input/matrix_keypad.h>

arch/arm/mach-omap2/board-omap4panda.c

@@ -40,7 +40,7 @@
 #include <plat/common.h>
 #include <plat/usb.h>
 #include <plat/mmc.h>
-#include <plat/panel-generic-dpi.h>
+#include <video/omap-panel-generic-dpi.h>
 #include "timer-gp.h"
 
 #include "hsmmc.h"

arch/arm/mach-omap2/board-overo.c

@@ -44,7 +44,7 @@
 #include <plat/board.h>
 #include <plat/common.h>
 #include <video/omapdss.h>
-#include <plat/panel-generic-dpi.h>
+#include <video/omap-panel-generic-dpi.h>
 #include <mach/gpio.h>
 #include <plat/gpmc.h>
 #include <mach/hardware.h>

drivers/video/omap2/displays/panel-generic-dpi.c

@@ -35,7 +35,7 @@
 #include <linux/slab.h>
 #include <video/omapdss.h>
 
-#include <plat/panel-generic-dpi.h>
+#include <video/omap-panel-generic-dpi.h>
 
 struct panel_config {
 	struct omap_video_timings timings;

arch/arm/plat-omap/include/plat/panel-generic-dpi.h → include/video/omap-panel-generic-dpi.h

@@ -17,8 +17,8 @@
  * this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-#ifndef __ARCH_ARM_PLAT_OMAP_PANEL_GENERIC_DPI_H
-#define __ARCH_ARM_PLAT_OMAP_PANEL_GENERIC_DPI_H
+#ifndef __OMAP_PANEL_GENERIC_DPI_H
+#define __OMAP_PANEL_GENERIC_DPI_H
 
 struct omap_dss_device;
 
@@ -34,4 +34,4 @@ struct panel_generic_dpi_data {
 	void (*platform_disable)(struct omap_dss_device *dssdev);
 };
 
-#endif /* __ARCH_ARM_PLAT_OMAP_PANEL_GENERIC_DPI_H */
+#endif /* __OMAP_PANEL_GENERIC_DPI_H */