Commit f8cab69b authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'linux-kselftest-4.20-rc1' of...

Merge tag 'linux-kselftest-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest updates from Shuah Khan:
 "This Kselftest update for Linux 4.20-rc1 consists of:

   - Improvements to ftrace test suite from Masami Hiramatsu.

   - Color coded ftrace PASS / FAIL results from Steven Rostedt (VMware)
     to improve readability of reports.

   - watchdog Fixes and enhancement to add gettimeout and get|set
     pretimeout options from Jerry Hoemann.

   - Several fixes to warnings and spelling etc"

* tag 'linux-kselftest-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (40 commits)
  selftests/ftrace: Strip escape sequences for log file
  selftests/ftrace: Use colored output when available
  selftests: fix warning: "_GNU_SOURCE" redefined
  selftests: kvm: Fix -Wformat warnings
  selftests/ftrace: Add color to the PASS / FAIL results
  kvm: selftests: fix spelling mistake "Insufficent" -> "Insufficient"
  selftests: gpio: Fix OUTPUT directory in Makefile
  selftests: gpio: restructure Makefile
  selftests: watchdog: Fix ioctl SET* error paths to take oneshot exit path
  selftests: watchdog: Add gettimeout and get|set pretimeout
  selftests: watchdog: Fix error message.
  selftests: watchdog: fix message when /dev/watchdog open fails
  selftests/ftrace: Add ftrace cpumask testcase
  selftests/ftrace: Add wakeup_rt tracer testcase
  selftests/ftrace: Add wakeup tracer testcase
  selftests/ftrace: Add stacktrace ftrace filter command testcase
  selftests/ftrace: Add trace_pipe testcase
  selftests/ftrace: Add function filter on module testcase
  selftests/ftrace: Add max stack tracer testcase
  selftests/ftrace: Add function profiling stat testcase
  ...
parents dad4f140 f73581f8
......@@ -4,6 +4,12 @@ CONFIG_FUNCTION_PROFILER=y
CONFIG_TRACER_SNAPSHOT=y
CONFIG_STACK_TRACER=y
CONFIG_HIST_TRIGGERS=y
CONFIG_SCHED_TRACER=y
CONFIG_PREEMPT_TRACER=y
CONFIG_IRQSOFF_TRACER=y
CONFIG_PREEMPTIRQ_DELAY_TEST=m
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_SAMPLES=y
CONFIG_SAMPLE_TRACE_PRINTK=m
CONFIG_KALLSYMS_ALL=y
......@@ -60,15 +60,29 @@ parse_opts() { # opts
shift 1
;;
--verbose|-v|-vv|-vvv)
if [ $VERBOSE -eq -1 ]; then
usage "--console can not use with --verbose"
fi
VERBOSE=$((VERBOSE + 1))
[ $1 = '-vv' ] && VERBOSE=$((VERBOSE + 1))
[ $1 = '-vvv' ] && VERBOSE=$((VERBOSE + 2))
shift 1
;;
--console)
if [ $VERBOSE -ne 0 ]; then
usage "--console can not use with --verbose"
fi
VERBOSE=-1
shift 1
;;
--debug|-d)
DEBUG=1
shift 1
;;
--stop-fail)
STOP_FAILURE=1
shift 1
;;
--fail-unsupported)
UNSUPPORTED_RESULT=1
shift 1
......@@ -117,6 +131,7 @@ KEEP_LOG=0
DEBUG=0
VERBOSE=0
UNSUPPORTED_RESULT=0
STOP_FAILURE=0
# Parse command-line options
parse_opts $*
......@@ -137,11 +152,33 @@ else
date > $LOG_FILE
fi
# Define text colors
# Check available colors on the terminal, if any
ncolors=`tput colors 2>/dev/null`
color_reset=
color_red=
color_green=
color_blue=
# If stdout exists and number of colors is eight or more, use them
if [ -t 1 -a "$ncolors" -a "$ncolors" -ge 8 ]; then
color_reset="\e[0m"
color_red="\e[31m"
color_green="\e[32m"
color_blue="\e[34m"
fi
strip_esc() {
# busybox sed implementation doesn't accept "\x1B", so use [:cntrl:] instead.
sed -E "s/[[:cntrl:]]\[([0-9]{1,2}(;[0-9]{1,2})?)?[m|K]//g"
}
prlog() { # messages
[ -z "$LOG_FILE" ] && echo "$@" || echo "$@" | tee -a $LOG_FILE
echo -e "$@"
[ "$LOG_FILE" ] && echo -e "$@" | strip_esc >> $LOG_FILE
}
catlog() { #file
[ -z "$LOG_FILE" ] && cat $1 || cat $1 | tee -a $LOG_FILE
cat $1
[ "$LOG_FILE" ] && cat $1 | strip_esc >> $LOG_FILE
}
prlog "=== Ftrace unit tests ==="
......@@ -180,37 +217,37 @@ test_on_instance() { # testfile
eval_result() { # sigval
case $1 in
$PASS)
prlog " [PASS]"
prlog " [${color_green}PASS${color_reset}]"
PASSED_CASES="$PASSED_CASES $CASENO"
return 0
;;
$FAIL)
prlog " [FAIL]"
prlog " [${color_red}FAIL${color_reset}]"
FAILED_CASES="$FAILED_CASES $CASENO"
return 1 # this is a bug.
;;
$UNRESOLVED)
prlog " [UNRESOLVED]"
prlog " [${color_blue}UNRESOLVED${color_reset}]"
UNRESOLVED_CASES="$UNRESOLVED_CASES $CASENO"
return 1 # this is a kind of bug.. something happened.
;;
$UNTESTED)
prlog " [UNTESTED]"
prlog " [${color_blue}UNTESTED${color_reset}]"
UNTESTED_CASES="$UNTESTED_CASES $CASENO"
return 0
;;
$UNSUPPORTED)
prlog " [UNSUPPORTED]"
prlog " [${color_blue}UNSUPPORTED${color_reset}]"
UNSUPPORTED_CASES="$UNSUPPORTED_CASES $CASENO"
return $UNSUPPORTED_RESULT # depends on use case
;;
$XFAIL)
prlog " [XFAIL]"
prlog " [${color_red}XFAIL${color_reset}]"
XFAILED_CASES="$XFAILED_CASES $CASENO"
return 0
;;
*)
prlog " [UNDEFINED]"
prlog " [${color_blue}UNDEFINED${color_reset}]"
UNDEFINED_CASES="$UNDEFINED_CASES $CASENO"
return 1 # this must be a test bug
;;
......@@ -269,16 +306,18 @@ __run_test() { # testfile
# Run one test case
run_test() { # testfile
local testname=`basename $1`
testcase $1
if [ ! -z "$LOG_FILE" ] ; then
local testlog=`mktemp $LOG_DIR/${testname}-log.XXXXXX`
local testlog=`mktemp $LOG_DIR/${CASENO}-${testname}-log.XXXXXX`
else
local testlog=/proc/self/fd/1
fi
export TMPDIR=`mktemp -d /tmp/ftracetest-dir.XXXXXX`
testcase $1
echo "execute$INSTANCE: "$1 > $testlog
SIG_RESULT=0
if [ -z "$LOG_FILE" ]; then
if [ $VERBOSE -eq -1 ]; then
__run_test $1
elif [ -z "$LOG_FILE" ]; then
__run_test $1 2>&1
elif [ $VERBOSE -ge 3 ]; then
__run_test $1 | tee -a $testlog 2>&1
......@@ -304,6 +343,10 @@ run_test() { # testfile
# Main loop
for t in $TEST_CASES; do
run_test $t
if [ $STOP_FAILURE -ne 0 -a $TOTAL_RESULT -ne 0 ]; then
echo "A failure detected. Stop test."
exit 1
fi
done
# Test on instance loop
......@@ -315,7 +358,12 @@ for t in $TEST_CASES; do
run_test $t
rmdir $TRACING_DIR
TRACING_DIR=$SAVED_TRACING_DIR
if [ $STOP_FAILURE -ne 0 -a $TOTAL_RESULT -ne 0 ]; then
echo "A failure detected. Stop test."
exit 1
fi
done
(cd $TRACING_DIR; initialize_ftrace) # for cleanup
prlog ""
prlog "# of passed: " `echo $PASSED_CASES | wc -w`
......
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
# description: Change the ringbuffer size
# flags: instance
rb_size_test() {
ORIG=`cat buffer_size_kb`
expr $ORIG / 2 > buffer_size_kb
expr $ORIG \* 2 > buffer_size_kb
echo $ORIG > buffer_size_kb
}
rb_size_test
: "If per-cpu buffer is supported, imbalance it"
if [ -d per_cpu/cpu0 ]; then
cd per_cpu/cpu0
rb_size_test
fi
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
# description: trace_pipe and trace_marker
# flags: instance
[ ! -f trace_marker ] && exit_unsupported
echo "test input 1" > trace_marker
: "trace interface never consume the ring buffer"
grep -q "test input 1" trace
grep -q "test input 1" trace
: "trace interface never consume the ring buffer"
head -n 1 trace_pipe | grep -q "test input 1"
! grep -q "test input 1" trace
......@@ -9,23 +9,15 @@ do_reset() {
}
fail() { #msg
do_reset
echo $1
exit_fail
}
yield() {
ping localhost -c 1 || sleep .001 || usleep 1 || sleep 1
}
if [ ! -f set_event -o ! -d events/sched ]; then
echo "event tracing is not supported"
exit_unsupported
fi
reset_tracer
do_reset
echo 'sched:sched_switch' > set_event
yield
......@@ -57,6 +49,4 @@ if [ $count -ne 0 ]; then
fail "sched_switch events should not be recorded"
fi
do_reset
exit 0
......@@ -16,10 +16,6 @@ fail() { #msg
exit_fail
}
yield() {
ping localhost -c 1 || sleep .001 || usleep 1 || sleep 1
}
if [ ! -f set_event -o ! -d events/sched ]; then
echo "event tracing is not supported"
exit_unsupported
......@@ -30,8 +26,7 @@ if [ ! -f set_event_pid ]; then
exit_unsupported
fi
reset_tracer
do_reset
echo 0 > options/event-fork
echo 1 > events/sched/sched_switch/enable
......@@ -47,6 +42,7 @@ do_reset
read mypid rest < /proc/self/stat
echo $mypid > set_event_pid
grep -q $mypid set_event_pid
echo 'sched:sched_switch' > set_event
yield
......
......@@ -9,23 +9,15 @@ do_reset() {
}
fail() { #msg
do_reset
echo $1
exit_fail
}
yield() {
ping localhost -c 1 || sleep .001 || usleep 1 || sleep 1
}
if [ ! -f set_event -o ! -d events/sched ]; then
echo "event tracing is not supported"
exit_unsupported
fi
reset_tracer
do_reset
echo 'sched:*' > set_event
yield
......@@ -57,6 +49,4 @@ if [ $count -ne 0 ]; then
fail "any of scheduler events should not be recorded"
fi
do_reset
exit 0
......@@ -8,23 +8,15 @@ do_reset() {
}
fail() { #msg
do_reset
echo $1
exit_fail
}
yield() {
ping localhost -c 1 || sleep .001 || usleep 1 || sleep 1
}
if [ ! -f available_events -o ! -f set_event -o ! -d events ]; then
echo "event tracing is not supported"
exit_unsupported
fi
reset_tracer
do_reset
echo '*:*' > set_event
yield
......@@ -60,6 +52,4 @@ if [ $count -ne 0 ]; then
fail "any of events should not be recorded"
fi
do_reset
exit 0
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
# description: Test trace_printk from module
rmmod trace-printk ||:
if ! modprobe trace-printk ; then
echo "No trace-printk sample module - please make CONFIG_SAMPLE_TRACE_PRINTK=m"
exit_unresolved;
fi
echo "Waiting for irq work"
sleep 1
grep -q ": This .* trace_bputs" trace
grep -q ": This .* trace_puts" trace
grep -q ": This .* trace_bprintk" trace
grep -q ": This .* trace_printk" trace
grep -q ": (irq) .* trace_bputs" trace
grep -q ": (irq) .* trace_puts" trace
grep -q ": (irq) .* trace_bprintk" trace
grep -q ": (irq) .* trace_printk" trace
grep -q "This is a %s that will use trace_bprintk" printk_formats
grep -q "(irq) This is a static string that will use trace_bputs" printk_formats
rmmod trace-printk ||:
......@@ -16,13 +16,9 @@ if [ ! -f set_ftrace_filter ]; then
fi
do_reset() {
reset_tracer
if [ -e /proc/sys/kernel/stack_tracer_enabled ]; then
echo 0 > /proc/sys/kernel/stack_tracer_enabled
fi
enable_tracing
clear_trace
echo > set_ftrace_filter
}
fail() { # msg
......
......@@ -9,14 +9,7 @@ if ! grep -q function_graph available_tracers; then
exit_unsupported
fi
do_reset() {
reset_tracer
enable_tracing
clear_trace
}
fail() { # msg
do_reset
echo $1
exit_fail
}
......@@ -48,6 +41,4 @@ if [ $count -eq 0 ]; then
fail "No schedule traces found?"
fi
do_reset
exit 0
......@@ -35,12 +35,6 @@ if [ $do_function_fork -eq 1 ]; then
fi
do_reset() {
reset_tracer
clear_trace
enable_tracing
echo > set_ftrace_filter
echo > set_ftrace_pid
if [ $do_function_fork -eq 0 ]; then
return
fi
......@@ -54,10 +48,6 @@ fail() { # msg
exit_fail
}
yield() {
ping localhost -c 1 || sleep .001 || usleep 1 || sleep 1
}
do_test() {
disable_tracing
......
#!/bin/sh
# SPDX-License-Identifier: GPL2.0
# description: ftrace - stacktrace filter command
# flags: instance
echo _do_fork:stacktrace >> set_ftrace_filter
grep -q "_do_fork:stacktrace:unlimited" set_ftrace_filter
(echo "forked"; sleep 1)
grep -q "<stack trace>" trace
#!/bin/sh
# SPDX-License-Identifier: GPL2.0
# description: ftrace - function trace with cpumask
if ! which nproc ; then
nproc() {
ls -d /sys/devices/system/cpu/cpu[0-9]* | wc -l
}
fi
NP=`nproc`
if [ $NP -eq 1 ] ;then
echo "We can not test cpumask on UP environment"
exit_unresolved
fi
ORIG_CPUMASK=`cat tracing_cpumask`
do_reset() {
echo $ORIG_CPUMASK > tracing_cpumask
}
echo 0 > tracing_on
echo > trace
: "Bitmask only record on CPU1"
echo 2 > tracing_cpumask
MASK=0x`cat tracing_cpumask`
test `printf "%d" $MASK` -eq 2 || do_reset
echo function > current_tracer
echo 1 > tracing_on
(echo "forked")
echo 0 > tracing_on
: "Check CPU1 events are recorded"
grep -q -e "\[001\]" trace || do_reset
: "There should be No other cpu events"
! grep -qv -e "\[001\]" -e "^#" trace || do_reset
do_reset
......@@ -25,15 +25,12 @@ do_reset() {
}
fail() { # mesg
do_reset
echo $1
exit_fail
}
SLEEP_TIME=".1"
do_reset
echo "Testing function probes with events:"
EVENT="sched:sched_switch"
......
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
# description: ftrace - function trace on module
[ ! -f set_ftrace_filter ] && exit_unsupported
: "mod: allows to filter a non exist function"
echo 'non_exist_func:mod:non_exist_module' > set_ftrace_filter
grep -q "non_exist_func" set_ftrace_filter
: "mod: on exist module"
echo '*:mod:trace_printk' > set_ftrace_filter
if ! modprobe trace-printk ; then
echo "No trace-printk sample module - please make CONFIG_SAMPLE_TRACE_PRINTK=
m"
exit_unresolved;
fi
: "Wildcard should be resolved after loading module"
grep -q "trace_printk_irq_work" set_ftrace_filter
: "After removing the filter becomes empty"
rmmod trace_printk
test `cat set_ftrace_filter | wc -l` -eq 0
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
# description: ftrace - function profiling
[ ! -f function_profile_enabled ] && exit_unsupported
: "Enable function profile"
echo 1 > function_profile_enabled
: "Profile must be updated"
cp trace_stat/function0 $TMPDIR/
( echo "forked"; sleep 1 )
: "diff returns 0 if there is no difference"
! diff trace_stat/function0 $TMPDIR/function0
echo 0 > function_profile_enabled
: "Profile must NOT be updated"
cp trace_stat/function0 $TMPDIR/
( echo "forked"; sleep 1 )
: "diff returns 0 if there is no difference"
diff trace_stat/function0 $TMPDIR/function0
......@@ -29,8 +29,6 @@ if [ ! -f function_profile_enabled ]; then
fi
fail() { # mesg
reset_tracer
echo > set_ftrace_filter
echo $1
exit_fail
}
......@@ -76,6 +74,4 @@ if ! grep -v -e '^#' -e 'schedule' trace > /dev/null; then
fail "no other functions besides schedule was found"
fi
reset_tracer
exit 0
......@@ -15,22 +15,11 @@ if [ ! -f set_ftrace_filter ]; then
exit_unsupported
fi
do_reset() {
reset_tracer
reset_ftrace_filter
disable_events
clear_trace
enable_tracing
}
fail() { # mesg
do_reset
echo $1
exit_fail
}
do_reset
FILTER=set_ftrace_filter
FUNC1="schedule"
FUNC2="do_softirq"
......@@ -165,6 +154,4 @@ test_actual
rm $TMPDIR/expected
rm $TMPDIR/actual
do_reset
exit 0
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
# description: ftrace - Max stack tracer
# Test the basic function of max-stack usage tracing
if [ ! -f stack_trace ]; then
echo "Max stack tracer is not supported - please make CONFIG_STACK_TRACER=y"
exit_unsupported
fi
echo > stack_trace_filter
echo 0 > stack_max_size
echo 1 > /proc/sys/kernel/stack_tracer_enabled
: "Fork and wait for the first entry become !lock"
timeout=10
while [ $timeout -ne 0 ]; do
( echo "forked" )
FL=`grep " 0)" stack_trace`
echo $FL | grep -q "lock" || break;
timeout=$((timeout - 1))
done
echo 0 > /proc/sys/kernel/stack_tracer_enabled
echo '*lock*' > stack_trace_filter
test `cat stack_trace_filter | wc -l` -eq `grep lock stack_trace_filter | wc -l`
echo 0 > stack_max_size
echo 1 > /proc/sys/kernel/stack_tracer_enabled
: "Fork and always the first entry including lock"
timeout=10
while [ $timeout -ne 0 ]; do
( echo "forked" )
FL=`grep " 0)" stack_trace`
echo $FL | grep -q "lock"
timeout=$((timeout - 1))
done
echo 0 > /proc/sys/kernel/stack_tracer_enabled
......@@ -16,24 +16,13 @@ if [ ! -f set_ftrace_filter ]; then
exit_unsupported
fi
do_reset() {
reset_ftrace_filter
reset_tracer
disable_events
clear_trace
enable_tracing
}
fail() { # mesg
do_reset
echo $1
exit_fail
}
SLEEP_TIME=".1"
do_reset
echo "Testing function probes with enabling disabling tracing:"
cnt_trace() {
......
......@@ -89,12 +89,23 @@ initialize_ftrace() { # Reset ftrace to initial-state
reset_tracer
reset_trigger
reset_events_filter
reset_ftrace_filter
disable_events
echo > set_event_pid # event tracer is always on
echo > set_ftrace_pid
[ -f set_ftrace_filter ] && echo | tee set_ftrace_*
[ -f set_graph_function ] && echo | tee set_graph_*
[ -f stack_trace_filter ] && echo > stack_trace_filter
[ -f kprobe_events ] && echo > kprobe_events
[ -f uprobe_events ] && echo > uprobe_events
[ -f synthetic_events ] && echo > synthetic_events
[ -f snapshot ] && echo 0 > snapshot
clear_trace
enable_tracing
}
LOCALHOST=127.0.0.1
yield() {
ping $LOCALHOST -c 1 || sleep .001 || usleep 1 || sleep 1
}
......@@ -4,10 +4,7 @@
[ -f kprobe_events ] || exit_unsupported # this is configurable
echo 0 > events/enable
echo > kprobe_events
echo p:myevent _do_fork > kprobe_events
grep myevent kprobe_events
test -d events/kprobes/myevent
echo > kprobe_events
clear_trace
......@@ -4,12 +4,9 @@
[ -f kprobe_events ] || exit_unsupported
echo 0 > events/enable
echo > kprobe_events
echo p:myevent _do_fork > kprobe_events
test -d events/kprobes/myevent
echo 1 > events/kprobes/myevent/enable
echo > kprobe_events && exit_fail # this must fail
echo 0 > events/kprobes/myevent/enable
echo > kprobe_events # this must succeed
clear_trace
......@@ -4,13 +4,15 @@
[ -f kprobe_events ] || exit_unsupported # this is configurable
echo 0 > events/enable
echo > kprobe_events
echo 'p:testprobe _do_fork $stack $stack0 +0($stack)' > kprobe_events
grep testprobe kprobe_events
grep testprobe kprobe_events | grep -q 'arg1=\$stack arg2=\$stack0 arg3=+0(\$stack)'
test -d events/kprobes/testprobe
echo 1 > events/kprobes/testprobe/enable
( echo "forked")
grep testprobe trace | grep '_do_fork' | \
grep -q 'arg1=0x[[:xdigit:]]* arg2=0x[[:xdigit:]]* arg3=0x[[:xdigit:]]*$'
echo 0 > events/kprobes/testprobe/enable
echo "-:testprobe" >> kprobe_events
clear_trace
......
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
# description: Kprobe event with comm arguments
[ -f kprobe_events ] || exit_unsupported # this is configurable
grep -A1 "fetcharg:" README | grep -q "\$comm" || exit_unsupported # this is too old
echo 'p:testprobe _do_fork comm=$comm ' > kprobe_events
grep testprobe kprobe_events | grep -q 'comm=$comm'
test -d events/kprobes/testprobe
echo 1 > events/kprobes/testprobe/enable
( echo "forked")
grep testprobe trace | grep -q 'comm=".*"'
exit 0
......@@ -4,9 +4,6 @@
[ -f kprobe_events ] || exit_unsupported # this is configurable
echo 0 > events/enable
echo > kprobe_events
case `uname -m` in
x86_64)
ARG1=%di
......@@ -44,5 +41,3 @@ echo 1 > events/kprobes/testprobe/enable
echo "p:test _do_fork" >> kprobe_events
grep -qe "testprobe.* arg1=\"test\" arg2=\"test\"" trace
echo 0 > events/enable
echo > kprobe_events
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
# description: Kprobe event symbol argument
[ -f kprobe_events ] || exit_unsupported # this is configurable
SYMBOL="linux_proc_banner"
if [ ! -f /proc/kallsyms ]; then
echo "Can not check the target symbol - please enable CONFIG_KALLSYMS"
exit_unresolved
elif ! grep "$SYMBOL\$" /proc/kallsyms; then
echo "Linux banner is not exported - please enable CONFIG_KALLSYMS_ALL"
exit_unresolved
fi
: "Test get basic types symbol argument"
echo "p:testprobe_u _do_fork arg1=@linux_proc_banner:u64 arg2=@linux_proc_banner:u32 arg3=@linux_proc_banner:u16 arg4=@linux_proc_banner:u8" > kprobe_events
echo "p:testprobe_s _do_fork arg1=@linux_proc_banner:s64 arg2=@linux_proc_banner:s32 arg3=@linux_proc_banner:s16 arg4=@linux_proc_banner:s8" >> kprobe_events
if grep -q "x8/16/32/64" README; then
echo "p:testprobe_x _do_fork arg1=@linux_proc_banner:x64 arg2=@linux_proc_banner:x32 arg3=@linux_proc_banner:x16 arg4=@linux_proc_banner:x8" >> kprobe_events
fi
echo "p:testprobe_bf _do_fork arg1=@linux_proc_banner:b8@4/32" >> kprobe_events
echo 1 > events/kprobes/enable
(echo "forked")
echo 0 > events/kprobes/enable
grep "testprobe_[usx]:.* arg1=.* arg2=.* arg3=.* arg4=.*" trace
grep "testprobe_bf:.* arg1=.*" trace
: "Test get string symbol argument"
echo "p:testprobe_str _do_fork arg1=@linux_proc_banner:string" > kprobe_events
echo 1 > events/kprobes/enable
(echo "forked")
echo 0 > events/kprobes/enable
RESULT=`grep "testprobe_str" trace | sed -e 's/.* arg1=\(.*\)/\1/'`
RESULT=`echo $RESULT | sed -e 's/.* \((.*)\) \((.*)\) .*/\1 \2/'`
ORIG=`cat /proc/version | sed -e 's/.* \((.*)\) \((.*)\) .*/\1 \2/'`
test "$RESULT" = "$ORIG"
......@@ -6,9 +6,6 @@
grep "x8/16/32/64" README > /dev/null || exit_unsupported # version issue
echo 0 > events/enable
echo > kprobe_events
PROBEFUNC="vfs_read"
GOODREG=
BADREG=
......@@ -78,8 +75,11 @@ test_badarg "\$stackp" "\$stack0+10" "\$stack1-10"
echo "r ${PROBEFUNC} \$retval" > kprobe_events
! echo "p ${PROBEFUNC} \$retval" > kprobe_events
# $comm was introduced in 4.8, older kernels reject it.
if grep -A1 "fetcharg:" README | grep -q '\$comm' ; then
: "Comm access"
test_goodarg "\$comm"
fi
: "Indirect memory access"
test_goodarg "+0(${GOODREG})" "-0(${GOODREG})" "+10(\$stack)" \
......@@ -100,5 +100,3 @@ test_badarg "${GOODREG}::${GOODTYPE}" "${GOODREG}:${BADTYPE}" \
test_goodarg "\$comm:string" "+0(\$stack):string"
test_badarg "\$comm:x64" "\$stack:string" "${GOODREG}:string"
echo > kprobe_events
......@@ -6,33 +6,45 @@
grep "x8/16/32/64" README > /dev/null || exit_unsupported # version issue
echo 0 > events/enable
echo > kprobe_events
enable_tracing
echo 'p:testprobe _do_fork $stack0:s32 $stack0:u32 $stack0:x32 $stack0:b8@4/32' > kprobe_events
grep testprobe kprobe_events
test -d events/kprobes/testprobe
echo 1 > events/kprobes/testprobe/enable
( echo "forked")
echo 0 > events/kprobes/testprobe/enable
ARGS=`tail -n 1 trace | sed -e 's/.* arg1=\(.*\) arg2=\(.*\) arg3=\(.*\) arg4=\(.*\)/\1 \2 \3 \4/'`
gen_event() { # Bitsize
echo "p:testprobe _do_fork \$stack0:s$1 \$stack0:u$1 \$stack0:x$1 \$stack0:b4@4/$1"
}
check_types() {
X1=`printf "%x" $1 | tail -c 8`
check_types() { # s-type u-type x-type bf-type width
test $# -eq 5
CW=$5
CW=$((CW / 4))
X1=`printf "%x" $1 | tail -c ${CW}`
X2=`printf "%x" $2`
X3=`printf "%x" $3`
test $X1 = $X2
test $X2 = $X3
test 0x$X3 = $3
B4=`printf "%02x" $4`
B3=`echo -n $X3 | tail -c 3 | head -c 2`
B4=`printf "%1x" $4`
B3=`printf "%03x" 0x$X3 | tail -c 2 | head -c 1`
test $B3 = $B4
}
check_types $ARGS
echo "-:testprobe" >> kprobe_events
clear_trace
test -d events/kprobes/testprobe && exit_fail || exit_pass
for width in 64 32 16 8; do
: "Add new event with basic types"
gen_event $width > kprobe_events
grep testprobe kprobe_events
test -d events/kprobes/testprobe
: "Trace the event"
echo 1 > events/kprobes/testprobe/enable
( echo "forked")
echo 0 > events/kprobes/testprobe/enable
: "Confirm the arguments is recorded in given types correctly"
ARGS=`grep "testprobe" trace | sed -e 's/.* arg1=\(.*\) arg2=\(.*\) arg3=\(.*\) arg4=\(.*\)/\1 \2 \3 \4/'`
check_types $ARGS $width
: "Clear event for next loop"
echo "-:testprobe" >> kprobe_events
clear_trace
done
exit_pass
......@@ -4,9 +4,6 @@
[ -f kprobe_events ] || exit_unsupported # this is configurable
disable_events
echo > kprobe_events
:;: "Add an event on function without name" ;:
FUNC=`grep " [tT] .*vfs_read$" /proc/kallsyms | tail -n 1 | cut -f 3 -d " "`
......@@ -33,5 +30,3 @@ echo "p $FUNC" > kprobe_events
EVENT=`grep $FUNC kprobe_events | cut -f 1 -d " " | cut -f 2 -d:`
[ "x" != "x$EVENT" ] || exit_failure
test -d events/$EVENT || exit_failure
echo > kprobe_events
......@@ -8,8 +8,6 @@ grep function available_tracers || exit_unsupported # this is configurable
# prepare
echo nop > current_tracer
echo _do_fork > set_ftrace_filter
echo 0 > events/enable
echo > kprobe_events
echo 'p:testprobe _do_fork' > kprobe_events
# kprobe on / ftrace off
......@@ -47,10 +45,3 @@ echo > trace
( echo "forked")
grep testprobe trace
! grep '_do_fork <-' trace
# cleanup
echo nop > current_tracer
echo > set_ftrace_filter
echo 0 > events/kprobes/testprobe/enable
echo > kprobe_events
echo > trace
......@@ -4,14 +4,18 @@
[ -f kprobe_events ] || exit_unsupported # this is configurable
disable_events
echo > kprobe_events
rmmod trace-printk ||:
if ! modprobe trace-printk ; then
echo "No trace-printk sample module - please make CONFIG_SAMPLE_TRACE_PRINTK=
m"
exit_unresolved;
fi
MOD=trace_printk
FUNC=trace_printk_irq_work
:;: "Add an event on a module function without specifying event name" ;:
MOD=`lsmod | head -n 2 | tail -n 1 | cut -f1 -d" "`
FUNC=`grep -m 1 ".* t .*\\[$MOD\\]" /proc/kallsyms | xargs | cut -f3 -d" "`
[ "x" != "x$MOD" -a "y" != "y$FUNC" ] || exit_unresolved
echo "p $MOD:$FUNC" > kprobe_events
PROBE_NAME=`echo $MOD:$FUNC | tr ".:" "_"`
test -d events/kprobes/p_${PROBE_NAME}_0 || exit_failure
......@@ -26,4 +30,24 @@ test -d events/kprobes/event1 || exit_failure
echo "p:kprobes1/event1 $MOD:$FUNC" > kprobe_events
test -d events/kprobes1/event1 || exit_failure
echo > kprobe_events
:;: "Remove target module, but event still be there" ;:
if ! rmmod trace-printk ; then
echo "Failed to unload module - please enable CONFIG_MODULE_UNLOAD"
exit_unresolved;
fi
test -d events/kprobes1/event1
:;: "Check posibility to defining events on unloaded module";:
echo "p:event2 $MOD:$FUNC" >> kprobe_events
:;: "Target is gone, but we can prepare for next time";:
echo 1 > events/kprobes1/event1/enable
:;: "Load module again, which means the event1 should be recorded";:
modprobe trace-printk
grep "event1:" trace
:;: "Remove the module again and check the event is not locked"
rmmod trace-printk
echo 0 > events/kprobes1/event1/enable
echo "-:kprobes1/event1" >> kprobe_events
......@@ -4,13 +4,16 @@
[ -f kprobe_events ] || exit_unsupported # this is configurable
echo 0 > events/enable
echo > kprobe_events
# Add new kretprobe event
echo 'r:testprobe2 _do_fork $retval' > kprobe_events
grep testprobe2 kprobe_events
grep testprobe2 kprobe_events | grep -q 'arg1=\$retval'
test -d events/kprobes/testprobe2
echo 1 > events/kprobes/testprobe2/enable
( echo "forked")
cat trace | grep testprobe2 | grep -q '<- _do_fork'
echo 0 > events/kprobes/testprobe2/enable
echo '-:testprobe2' >> kprobe_events
clear_trace
......
......@@ -5,8 +5,6 @@
[ -f kprobe_events ] || exit_unsupported # this is configurable
grep -q 'r\[maxactive\]' README || exit_unsupported # this is older version
echo > kprobe_events
# Test if we successfully reject unknown messages
if echo 'a:myprobeaccept inet_csk_accept' > kprobe_events; then false; else true; fi
......@@ -37,5 +35,3 @@ echo > kprobe_events
echo 'r10 inet_csk_accept' > kprobe_events
grep inet_csk_accept kprobe_events
echo > kprobe_events
clear_trace
......@@ -12,11 +12,6 @@ case `uname -m` in
*) OFFS=0;;
esac
if [ -d events/kprobes ]; then
echo 0 > events/kprobes/enable
echo > kprobe_events
fi
N=0
echo "Setup up kprobes on first available 256 text symbols"
grep -i " t " /proc/kallsyms | cut -f3 -d" " | grep -v .*\\..* | \
......
......@@ -30,8 +30,6 @@ if [ `printf "%x" -1 | wc -c` != 9 ]; then
UINT_TEST=yes
fi
echo 0 > events/enable
echo > kprobe_events
echo "p:testprobe ${TARGET_FUNC}" > kprobe_events
echo "p:testprobe ${TARGET}" > kprobe_events
echo "p:testprobe ${TARGET_FUNC}${NEXT}" > kprobe_events
......@@ -39,5 +37,3 @@ echo "p:testprobe ${TARGET_FUNC}${NEXT}" > kprobe_events
if [ "${UINT_TEST}" = yes ]; then
! echo "p:testprobe ${TARGET_FUNC}${OVERFLOW}" > kprobe_events
fi
echo > kprobe_events
clear_trace
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
# description: Kprobe dynamic event - adding and removing
[ -f kprobe_events ] || exit_unsupported # this is configurable
! grep -q 'myevent' kprobe_profile
echo p:myevent _do_fork > kprobe_events
grep -q 'myevent[[:space:]]*0[[:space:]]*0$' kprobe_profile
echo 1 > events/kprobes/myevent/enable
( echo "forked" )
grep -q 'myevent[[:space:]]*[[:digit:]]*[[:space:]]*0$' kprobe_profile
echo 0 > events/kprobes/myevent/enable
echo > kprobe_events
! grep -q 'myevent' kprobe_profile
#!/bin/sh
# SPDX-License-Identifier: GPL2.0
# description: %HERE DESCRIBE WHAT THIS DOES%
# you have to add ".tc" extention for your testcase file
# Note that all tests are run with "errexit" option.
......
#!/bin/sh
# SPDX-License-Identifier: GPL2.0
# description: Test wakeup tracer
if ! which chrt ; then
echo "chrt is not found. This test requires nice command."
exit_unresolved
fi
if ! grep -wq "wakeup" available_tracers ; then
echo "wakeup tracer is not supported"
exit_unsupported
fi
echo wakeup > current_tracer
echo 1 > tracing_on
echo 0 > tracing_max_latency
: "Wakeup higher priority task"
chrt -f 5 sleep 1
echo 0 > tracing_on
grep '+ \[[[:digit:]]*\]' trace
grep '==> \[[[:digit:]]*\]' trace
#!/bin/sh
# SPDX-License-Identifier: GPL2.0
# description: Test wakeup RT tracer
if ! which chrt ; then
echo "chrt is not found. This test requires chrt command."
exit_unresolved
fi
if ! grep -wq "wakeup_rt" available_tracers ; then
echo "wakeup_rt tracer is not supported"
exit_unsupported
fi
echo wakeup_rt > current_tracer
echo 1 > tracing_on
echo 0 > tracing_max_latency
: "Wakeup a realtime task"
chrt -f 5 sleep 1
echo 0 > tracing_on
grep "+ \[[[:digit:]]*\]" trace
grep "==> \[[[:digit:]]*\]" trace
......@@ -2,14 +2,7 @@
# description: event trigger - test extended error support
do_reset() {
reset_trigger
echo > set_event
clear_trace
}
fail() { #msg
do_reset
echo $1
exit_fail
}
......@@ -24,9 +17,6 @@ if [ ! -f synthetic_events ]; then
exit_unsupported
fi
reset_tracer
do_reset
echo "Test extended error support"
echo 'hist:keys=pid:ts0=common_timestamp.usecs if comm=="ping"' > events/sched/sched_wakeup/trigger
! echo 'hist:keys=pid:ts0=common_timestamp.usecs if comm=="ping"' >> events/sched/sched_wakeup/trigger 2> /dev/null
......@@ -34,6 +24,4 @@ if ! grep -q "ERROR:" events/sched/sched_wakeup/hist; then
fail "Failed to generate extended error in histogram"
fi
do_reset
exit 0
#!/bin/sh
# description: event trigger - test field variable support
do_reset() {
reset_trigger
echo > set_event
clear_trace
}
fail() { #msg
do_reset
echo $1
exit_fail
}
......@@ -23,10 +16,6 @@ if [ ! -f synthetic_events ]; then
exit_unsupported
fi
clear_synthetic_events
reset_tracer
do_reset
echo "Test field variable support"
echo 'wakeup_latency u64 lat; pid_t pid; int prio; char comm[16]' > synthetic_events
......@@ -34,7 +23,7 @@ echo 'hist:keys=comm:ts0=common_timestamp.usecs if comm=="ping"' > events/sched/
echo 'hist:keys=next_comm:wakeup_lat=common_timestamp.usecs-$ts0:onmatch(sched.sched_waking).wakeup_latency($wakeup_lat,next_pid,sched.sched_waking.prio,next_comm) if next_comm=="ping"' > events/sched/sched_switch/trigger
echo 'hist:keys=pid,prio,comm:vals=lat:sort=pid,prio' > events/synthetic/wakeup_latency/trigger
ping localhost -c 3
ping $LOCALHOST -c 3
if ! grep -q "ping" events/synthetic/wakeup_latency/hist; then
fail "Failed to create inter-event histogram"
fi
......@@ -49,6 +38,4 @@ if grep -q "synthetic_prio=prio" events/sched/sched_waking/hist; then
fail "Failed to remove histogram with field variable"
fi
do_reset
exit 0
#!/bin/sh
# description: event trigger - test inter-event combined histogram trigger
do_reset() {
reset_trigger
echo > set_event
clear_trace
}
fail() { #msg
do_reset
echo $1
exit_fail
}
......@@ -23,10 +16,6 @@ if [ ! -f synthetic_events ]; then
exit_unsupported
fi
reset_tracer
do_reset
clear_synthetic_events
echo "Test create synthetic event"
echo 'waking_latency u64 lat pid_t pid' > synthetic_events
......@@ -48,11 +37,9 @@ echo 'waking+wakeup_latency u64 lat; pid_t pid' >> synthetic_events
echo 'hist:keys=pid,lat:sort=pid,lat:ww_lat=$waking_lat+$wakeup_lat:onmatch(synthetic.wakeup_latency).waking+wakeup_latency($ww_lat,pid)' >> events/synthetic/wakeup_latency/trigger
echo 'hist:keys=pid,lat:sort=pid,lat' >> events/synthetic/waking+wakeup_latency/trigger
ping localhost -c 3
ping $LOCALHOST -c 3
if ! grep -q "pid:" events/synthetic/waking+wakeup_latency/hist; then
fail "Failed to create combined histogram"
fi
do_reset
exit 0
#!/bin/sh
# description: event trigger - test multiple actions on hist trigger
do_reset() {
reset_trigger
echo > set_event
clear_trace
}
fail() { #msg
do_reset
echo $1
exit_fail
}
......@@ -24,10 +16,6 @@ if [ ! -f synthetic_events ]; then
exit_unsupported
fi
clear_synthetic_events
reset_tracer
do_reset
echo "Test multiple actions on hist trigger"
echo 'wakeup_latency u64 lat; pid_t pid' >> synthetic_events
TRIGGER1=events/sched/sched_wakeup/trigger
......@@ -39,6 +27,4 @@ echo 'hist:keys=next_pid:onmatch(sched.sched_wakeup).wakeup_latency(sched.sched_
echo 'hist:keys=next_pid:onmatch(sched.sched_wakeup).wakeup_latency(sched.sched_switch.$wakeup_lat,prev_pid) if next_comm=="cyclictest"' >> $TRIGGER2
echo 'hist:keys=next_pid if next_comm=="cyclictest"' >> $TRIGGER2
do_reset
exit 0
#!/bin/sh
# description: event trigger - test inter-event histogram trigger onmatch action
do_reset() {
reset_trigger
echo > set_event
clear_trace
}
fail() { #msg
do_reset
echo $1
exit_fail
}
......@@ -23,10 +16,6 @@ if [ ! -f synthetic_events ]; then
exit_unsupported
fi
clear_synthetic_events
reset_tracer
do_reset
echo "Test create synthetic event"
echo 'wakeup_latency u64 lat pid_t pid char comm[16]' > synthetic_events
......@@ -40,11 +29,10 @@ echo "Test histogram variables,simple expression support and onmatch action"
echo 'hist:keys=pid:ts0=common_timestamp.usecs if comm=="ping"' > events/sched/sched_wakeup/trigger
echo 'hist:keys=next_pid:wakeup_lat=common_timestamp.usecs-$ts0:onmatch(sched.sched_wakeup).wakeup_latency($wakeup_lat,next_pid,next_comm) if next_comm=="ping"' > events/sched/sched_switch/trigger
echo 'hist:keys=comm,pid,lat:wakeup_lat=lat:sort=lat' > events/synthetic/wakeup_latency/trigger
ping localhost -c 5
ping $LOCALHOST -c 5
if ! grep -q "ping" events/synthetic/wakeup_latency/hist; then
fail "Failed to create onmatch action inter-event histogram"
fi
do_reset
exit 0
#!/bin/sh
# description: event trigger - test inter-event histogram trigger onmatch-onmax action
do_reset() {
reset_trigger
echo > set_event
clear_trace
}
fail() { #msg
do_reset
echo $1
exit_fail
}
......@@ -23,10 +16,6 @@ if [ ! -f synthetic_events ]; then
exit_unsupported
fi
clear_synthetic_events
reset_tracer
do_reset
echo "Test create synthetic event"
echo 'wakeup_latency u64 lat pid_t pid char comm[16]' > synthetic_events
......@@ -40,11 +29,10 @@ echo "Test histogram variables,simple expression support and onmatch-onmax actio
echo 'hist:keys=pid:ts0=common_timestamp.usecs if comm=="ping"' > events/sched/sched_wakeup/trigger
echo 'hist:keys=next_pid:wakeup_lat=common_timestamp.usecs-$ts0:onmatch(sched.sched_wakeup).wakeup_latency($wakeup_lat,next_pid,next_comm):onmax($wakeup_lat).save(next_comm,prev_pid,prev_prio,prev_comm) if next_comm=="ping"' >> events/sched/sched_switch/trigger
echo 'hist:keys=comm,pid,lat:wakeup_lat=lat:sort=lat' > events/synthetic/wakeup_latency/trigger
ping localhost -c 5
ping $LOCALHOST -c 5
if [ ! grep -q "ping" events/synthetic/wakeup_latency/hist -o ! grep -q "max:" events/sched/sched_switch/hist]; then
fail "Failed to create onmatch-onmax action inter-event histogram"
fi
do_reset
exit 0
#!/bin/sh
# description: event trigger - test inter-event histogram trigger onmax action
do_reset() {
reset_trigger
echo > set_event
clear_trace
}
fail() { #msg
do_reset
echo $1
exit_fail
}
......@@ -23,10 +16,6 @@ if [ ! -f synthetic_events ]; then
exit_unsupported
fi
clear_synthetic_events
reset_tracer
do_reset
echo "Test create synthetic event"
echo 'wakeup_latency u64 lat pid_t pid char comm[16]' > synthetic_events
......@@ -38,11 +27,10 @@ echo "Test onmax action"
echo 'hist:keys=pid:ts0=common_timestamp.usecs if comm=="ping"' >> events/sched/sched_waking/trigger
echo 'hist:keys=next_pid:wakeup_lat=common_timestamp.usecs-$ts0:onmax($wakeup_lat).save(next_comm,prev_pid,prev_prio,prev_comm) if next_comm=="ping"' >> events/sched/sched_switch/trigger
ping localhost -c 3
ping $LOCALHOST -c 3
if ! grep -q "max:" events/sched/sched_switch/hist; then
fail "Failed to create onmax action inter-event histogram"
fi
do_reset
exit 0
#!/bin/sh
# description: event trigger - test synthetic event create remove
do_reset() {
reset_trigger
echo > set_event
clear_trace
}
fail() { #msg
do_reset
echo $1
exit_fail
}
......@@ -22,10 +16,6 @@ if [ ! -f synthetic_events ]; then
exit_unsupported
fi
clear_synthetic_events
reset_tracer
do_reset
echo "Test create synthetic event"
echo 'wakeup_latency u64 lat pid_t pid char comm[16]' > synthetic_events
......@@ -49,6 +39,4 @@ if [ -d events/synthetic/wakeup_latency ]; then
fail "Failed to delete wakeup_latency synthetic event"
fi
do_reset
exit 0
......@@ -3,14 +3,7 @@
# description: event trigger - test event enable/disable trigger
# flags: instance
do_reset() {
reset_trigger
echo > set_event
clear_trace
}
fail() { #msg
do_reset
echo $1
exit_fail
}
......@@ -25,9 +18,6 @@ if [ ! -f events/sched/sched_process_fork/trigger ]; then
exit_unsupported
fi
reset_tracer
do_reset
FEATURE=`grep enable_event events/sched/sched_process_fork/trigger`
if [ -z "$FEATURE" ]; then
echo "event enable/disable trigger is not supported"
......@@ -61,6 +51,4 @@ echo 'enable_event:sched:sched_switch' > events/sched/sched_process_fork/trigger
! echo 'enable_event:sched:sched_switch' > events/sched/sched_process_fork/trigger
! echo 'disable_event:sched:sched_switch' > events/sched/sched_process_fork/trigger
do_reset
exit 0
......@@ -3,14 +3,7 @@
# description: event trigger - test trigger filter
# flags: instance
do_reset() {
reset_trigger
echo > set_event
clear_trace
}
fail() { #msg
do_reset
echo $1
exit_fail
}
......@@ -25,9 +18,6 @@ if [ ! -f events/sched/sched_process_fork/trigger ]; then
exit_unsupported
fi
reset_tracer
do_reset
echo "Test trigger filter"
echo 1 > tracing_on
echo 'traceoff if child_pid == 0' > events/sched/sched_process_fork/trigger
......@@ -54,8 +44,4 @@ echo '!traceoff' > events/sched/sched_process_fork/trigger
echo 'traceoff if parent_pid >= 0 || child_pid >= 0' > events/sched/sched_process_fork/trigger
echo '!traceoff' > events/sched/sched_process_fork/trigger
do_reset
exit 0
......@@ -3,14 +3,7 @@
# description: event trigger - test histogram modifiers
# flags: instance
do_reset() {
reset_trigger
echo > set_event
clear_trace
}
fail() { #msg
do_reset
echo $1
exit_fail
}
......@@ -30,9 +23,6 @@ if [ ! -f events/sched/sched_process_fork/hist ]; then
exit_unsupported
fi
reset_tracer
do_reset
echo "Test histogram with execname modifier"
echo 'hist:keys=common_pid.execname' > events/sched/sched_process_fork/trigger
......@@ -71,6 +61,4 @@ for i in `seq 1 10` ; do ( echo "forked" > /dev/null); done
grep 'bytes_req: ~ 2^[0-9]*' events/kmem/kmalloc/hist > /dev/null || \
fail "log2 modifier on kmem/kmalloc did not work"
do_reset
exit 0
......@@ -3,14 +3,7 @@
# description: event trigger - test histogram trigger
# flags: instance
do_reset() {
reset_trigger
echo > set_event
clear_trace
}
fail() { #msg
do_reset
echo $1
exit_fail
}
......@@ -30,9 +23,6 @@ if [ ! -f events/sched/sched_process_fork/hist ]; then
exit_unsupported
fi
reset_tracer
do_reset
echo "Test histogram basic tigger"
echo 'hist:keys=parent_pid:vals=child_pid' > events/sched/sched_process_fork/trigger
......@@ -79,6 +69,4 @@ check_inc `grep -o "child_pid:[[:space:]]*[[:digit:]]*" \
events/sched/sched_process_fork/hist | cut -d: -f2 ` ||
fail "sort param on sched_process_fork did not work"
do_reset
exit 0
......@@ -3,14 +3,7 @@
# description: event trigger - test multiple histogram triggers
# flags: instance
do_reset() {
reset_trigger
echo > set_event
clear_trace
}
fail() { #msg
do_reset
echo $1
exit_fail
}
......@@ -30,11 +23,6 @@ if [ ! -f events/sched/sched_process_fork/hist ]; then
exit_unsupported
fi
reset_tracer
do_reset
reset_trigger
echo "Test histogram multiple tiggers"
echo 'hist:keys=parent_pid:vals=child_pid' > events/sched/sched_process_fork/trigger
......@@ -67,8 +55,4 @@ grep test_hist events/sched/sched_process_exit/hist > /dev/null || \
diffs=`diff events/sched/sched_process_exit/hist events/sched/sched_process_fork/hist | wc -l`
test $diffs -eq 0 || fail "Same name histograms are not same"
reset_trigger
do_reset
exit 0
......@@ -2,14 +2,7 @@
# SPDX-License-Identifier: GPL-2.0
# description: event trigger - test snapshot-trigger
do_reset() {
reset_trigger
echo > set_event
clear_trace
}
fail() { #msg
do_reset
echo $1
exit_fail
}
......@@ -29,9 +22,6 @@ if [ ! -f snapshot ]; then
exit_unsupported
fi
reset_tracer
do_reset
FEATURE=`grep snapshot events/sched/sched_process_fork/trigger`
if [ -z "$FEATURE" ]; then
echo "snapshot trigger is not supported"
......@@ -57,6 +47,4 @@ echo "Test snapshot semantic errors"
echo "snapshot" > events/sched/sched_process_fork/trigger
! echo "snapshot" > events/sched/sched_process_fork/trigger
do_reset
exit 0
......@@ -2,14 +2,7 @@
# SPDX-License-Identifier: GPL-2.0
# description: event trigger - test stacktrace-trigger
do_reset() {
reset_trigger
echo > set_event
clear_trace
}
fail() { #msg
do_reset
echo $1
exit_fail
}
......@@ -24,9 +17,6 @@ if [ ! -f events/sched/sched_process_fork/trigger ]; then
exit_unsupported
fi
reset_tracer
do_reset
FEATURE=`grep stacktrace events/sched/sched_process_fork/trigger`
if [ -z "$FEATURE" ]; then
echo "stacktrace trigger is not supported"
......@@ -49,6 +39,4 @@ echo "Test stacktrace semantic errors"
echo "stacktrace" > events/sched/sched_process_fork/trigger
! echo "stacktrace" > events/sched/sched_process_fork/trigger
do_reset
exit 0
......@@ -3,14 +3,7 @@
# description: trace_marker trigger - test histogram trigger
# flags: instance
do_reset() {
reset_trigger
echo > set_event
clear_trace
}
fail() { #msg
do_reset
echo $1
exit_fail
}
......@@ -35,8 +28,6 @@ if [ ! -f events/ftrace/print/hist ]; then
exit_unsupported
fi
do_reset
echo "Test histogram trace_marker tigger"
echo 'hist:keys=common_pid' > events/ftrace/print/trigger
......@@ -44,6 +35,4 @@ for i in `seq 1 10` ; do echo "hello" > trace_marker; done
grep 'hitcount: *10$' events/ftrace/print/hist > /dev/null || \
fail "hist trigger did not trigger correct times on trace_marker"
do_reset
exit 0
......@@ -3,15 +3,7 @@
# description: trace_marker trigger - test snapshot trigger
# flags: instance
do_reset() {
reset_trigger
echo > set_event
echo 0 > snapshot
clear_trace
}
fail() { #msg
do_reset
echo $1
exit_fail
}
......@@ -47,15 +39,13 @@ test_trace() {
fi
echo "testing $line for >$x<"
match=`echo $line | sed -e "s/>$x<//"`
if [ "$line" == "$match" ]; then
if [ "$line" = "$match" ]; then
fail "$line does not have >$x< in it"
fi
let x=$x+2
x=$((x+2))
done
}
do_reset
echo "Test snapshot trace_marker tigger"
echo 'snapshot' > events/ftrace/print/trigger
......@@ -69,6 +59,4 @@ for i in `seq 1 10` ; do echo "hello >$i<" > trace_marker; done
test_trace trace 1
test_trace snapshot 2
do_reset
exit 0
......@@ -3,15 +3,7 @@
# description: trace_marker trigger - test histogram with synthetic event against kernel event
# flags:
do_reset() {
reset_trigger
echo > set_event
echo > synthetic_events
clear_trace
}
fail() { #msg
do_reset
echo $1
exit_fail
}
......@@ -46,8 +38,6 @@ if [ ! -f events/ftrace/print/hist ]; then
exit_unsupported
fi
do_reset
echo "Test histogram kernel event to trace_marker latency histogram trigger"
echo 'latency u64 lat' > synthetic_events
......@@ -63,6 +53,4 @@ grep 'hitcount: *1$' events/ftrace/print/hist > /dev/null || \
grep 'hitcount: *1$' events/synthetic/latency/hist > /dev/null || \
fail "hist trigger did not trigger "
do_reset
exit 0
......@@ -3,15 +3,7 @@
# description: trace_marker trigger - test histogram with synthetic event
# flags:
do_reset() {
reset_trigger
echo > set_event
echo > synthetic_events
clear_trace
}
fail() { #msg
do_reset
echo $1
exit_fail
}
......@@ -41,8 +33,6 @@ if [ ! -f events/ftrace/print/hist ]; then
exit_unsupported
fi
do_reset
echo "Test histogram trace_marker to trace_marker latency histogram trigger"
echo 'latency u64 lat' > synthetic_events
......@@ -61,6 +51,4 @@ fi
grep 'hitcount: *1$' events/synthetic/latency/hist > /dev/null || \
fail "hist trigger did not trigger "
do_reset
exit 0
......@@ -2,14 +2,7 @@
# SPDX-License-Identifier: GPL-2.0
# description: event trigger - test traceon/off trigger
do_reset() {
reset_trigger
echo > set_event
clear_trace
}
fail() { #msg
do_reset
echo $1
exit_fail
}
......@@ -24,9 +17,6 @@ if [ ! -f events/sched/sched_process_fork/trigger ]; then
exit_unsupported
fi
reset_tracer
do_reset
echo "Test traceoff trigger"
echo 1 > tracing_on
echo 'traceoff' > events/sched/sched_process_fork/trigger
......@@ -54,6 +44,4 @@ echo 'traceon' > events/sched/sched_process_fork/trigger
! echo 'traceon' > events/sched/sched_process_fork/trigger
! echo 'traceoff' > events/sched/sched_process_fork/trigger
do_reset
exit 0
# SPDX-License-Identifier: GPL-2.0
CFLAGS += -O2 -g -std=gnu99 -Wall -I../../../../usr/include/
LDLIBS += -lmount -I/usr/include/libmount
TEST_PROGS := gpio-mockup.sh
TEST_FILES := gpio-mockup-sysfs.sh $(BINARIES)
BINARIES := gpio-mockup-chardev
EXTRA_PROGS := ../gpiogpio-event-mon ../gpiogpio-hammer ../gpiolsgpio
EXTRA_DIRS := ../gpioinclude/
EXTRA_OBJS := ../gpiogpio-event-mon-in.o ../gpiogpio-event-mon.o
EXTRA_OBJS += ../gpiogpio-hammer-in.o ../gpiogpio-utils.o ../gpiolsgpio-in.o
EXTRA_OBJS += ../gpiolsgpio.o
TEST_FILES := gpio-mockup-sysfs.sh
TEST_PROGS_EXTENDED := gpio-mockup-chardev
GPIODIR := $(realpath ../../../gpio)
GPIOOBJ := gpio-utils.o
include ../lib.mk
all: $(BINARIES)
all: $(TEST_PROGS_EXTENDED)
override define CLEAN
$(RM) $(BINARIES) $(EXTRA_PROGS) $(EXTRA_OBJS)
$(RM) -r $(EXTRA_DIRS)
$(RM) $(TEST_PROGS_EXTENDED)
$(MAKE) -C $(GPIODIR) OUTPUT=$(GPIODIR)/ clean
endef
CFLAGS += -O2 -g -std=gnu99 -Wall -I../../../../usr/include/
LDLIBS += -lmount -I/usr/include/libmount
$(BINARIES):| khdr
$(BINARIES): ../../../gpio/gpio-utils.o
$(TEST_PROGS_EXTENDED):| khdr
$(TEST_PROGS_EXTENDED): $(GPIODIR)/$(GPIOOBJ)
../../../gpio/gpio-utils.o:
make ARCH=$(ARCH) CROSS_COMPILE=$(CROSS_COMPILE) -C ../../../gpio
$(GPIODIR)/$(GPIOOBJ):
$(MAKE) OUTPUT=$(GPIODIR)/ -C $(GPIODIR)
......@@ -33,10 +33,10 @@
#define TEST_PAGES_PER_LOOP 1024
/* How many host loops to run (one KVM_GET_DIRTY_LOG for each loop) */
#define TEST_HOST_LOOP_N 32
#define TEST_HOST_LOOP_N 32UL
/* Interval for each host loop (ms) */
#define TEST_HOST_LOOP_INTERVAL 10
#define TEST_HOST_LOOP_INTERVAL 10UL
/*
* Guest/Host shared variables. Ensure addr_gva2hva() and/or
......
......@@ -128,7 +128,7 @@ struct kvm_vm *vm_create(enum vm_guest_mode mode, uint64_t phy_pages, int perm)
int kvm_fd;
vm = calloc(1, sizeof(*vm));
TEST_ASSERT(vm != NULL, "Insufficent Memory");
TEST_ASSERT(vm != NULL, "Insufficient Memory");
vm->mode = mode;
vm_open(vm, perm);
......
......@@ -14,7 +14,7 @@
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
// Test /proc/*/fd lookup.
#define _GNU_SOURCE
#undef NDEBUG
#include <assert.h>
#include <dirent.h>
......
......@@ -14,7 +14,7 @@
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
// Test that /proc/$KERNEL_THREAD/fd/ is empty.
#define _GNU_SOURCE
#undef NDEBUG
#include <sys/syscall.h>
#include <assert.h>
......
......@@ -19,7 +19,7 @@
int fd;
const char v = 'V';
static const char sopts[] = "bdehp:t:";
static const char sopts[] = "bdehp:t:Tn:N";
static const struct option lopts[] = {
{"bootstatus", no_argument, NULL, 'b'},
{"disable", no_argument, NULL, 'd'},
......@@ -27,6 +27,9 @@ static const struct option lopts[] = {
{"help", no_argument, NULL, 'h'},
{"pingrate", required_argument, NULL, 'p'},
{"timeout", required_argument, NULL, 't'},
{"gettimeout", no_argument, NULL, 'T'},
{"pretimeout", required_argument, NULL, 'n'},
{"getpretimeout", no_argument, NULL, 'N'},
{NULL, no_argument, NULL, 0x0}
};
......@@ -71,9 +74,13 @@ static void usage(char *progname)
printf(" -h, --help Print the help message\n");
printf(" -p, --pingrate=P Set ping rate to P seconds (default %d)\n", DEFAULT_PING_RATE);
printf(" -t, --timeout=T Set timeout to T seconds\n");
printf(" -T, --gettimeout Get the timeout\n");
printf(" -n, --pretimeout=T Set the pretimeout to T seconds\n");
printf(" -N, --getpretimeout Get the pretimeout\n");
printf("\n");
printf("Parameters are parsed left-to-right in real-time.\n");
printf("Example: %s -d -t 10 -p 5 -e\n", progname);
printf("Example: %s -t 12 -T -n 7 -N\n", progname);
}
int main(int argc, char *argv[])
......@@ -89,7 +96,13 @@ int main(int argc, char *argv[])
fd = open("/dev/watchdog", O_WRONLY);
if (fd == -1) {
printf("Watchdog device not enabled.\n");
if (errno == ENOENT)
printf("Watchdog device not enabled.\n");
else if (errno == EACCES)
printf("Run watchdog as root.\n");
else
printf("Watchdog device open failed %s\n",
strerror(errno));
exit(-1);
}
......@@ -103,23 +116,27 @@ int main(int argc, char *argv[])
printf("Last boot is caused by: %s.\n", (flags != 0) ?
"Watchdog" : "Power-On-Reset");
else
printf("WDIOC_GETBOOTSTATUS errno '%s'\n", strerror(errno));
printf("WDIOC_GETBOOTSTATUS error '%s'\n", strerror(errno));
break;
case 'd':
flags = WDIOS_DISABLECARD;
ret = ioctl(fd, WDIOC_SETOPTIONS, &flags);
if (!ret)
printf("Watchdog card disabled.\n");
else
printf("WDIOS_DISABLECARD errno '%s'\n", strerror(errno));
else {
printf("WDIOS_DISABLECARD error '%s'\n", strerror(errno));
oneshot = 1;
}
break;
case 'e':
flags = WDIOS_ENABLECARD;
ret = ioctl(fd, WDIOC_SETOPTIONS, &flags);
if (!ret)
printf("Watchdog card enabled.\n");
else
printf("WDIOS_ENABLECARD errno '%s'\n", strerror(errno));
else {
printf("WDIOS_ENABLECARD error '%s'\n", strerror(errno));
oneshot = 1;
}
break;
case 'p':
ping_rate = strtoul(optarg, NULL, 0);
......@@ -132,8 +149,36 @@ int main(int argc, char *argv[])
ret = ioctl(fd, WDIOC_SETTIMEOUT, &flags);
if (!ret)
printf("Watchdog timeout set to %u seconds.\n", flags);
else {
printf("WDIOC_SETTIMEOUT error '%s'\n", strerror(errno));
oneshot = 1;
}
break;
case 'T':
oneshot = 1;
ret = ioctl(fd, WDIOC_GETTIMEOUT, &flags);
if (!ret)
printf("WDIOC_GETTIMEOUT returns %u seconds.\n", flags);
else
printf("WDIOC_GETTIMEOUT error '%s'\n", strerror(errno));
break;
case 'n':
flags = strtoul(optarg, NULL, 0);
ret = ioctl(fd, WDIOC_SETPRETIMEOUT, &flags);
if (!ret)
printf("Watchdog pretimeout set to %u seconds.\n", flags);
else {
printf("WDIOC_SETPRETIMEOUT error '%s'\n", strerror(errno));
oneshot = 1;
}
break;
case 'N':
oneshot = 1;
ret = ioctl(fd, WDIOC_GETPRETIMEOUT, &flags);
if (!ret)
printf("WDIOC_GETPRETIMEOUT returns %u seconds.\n", flags);
else
printf("WDIOC_SETTIMEOUT errno '%s'\n", strerror(errno));
printf("WDIOC_GETPRETIMEOUT error '%s'\n", strerror(errno));
break;
default:
usage(argv[0]);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment