Commit f8ff96db authored by Octavian Purdila's avatar Octavian Purdila Committed by Benjamin Herrenschmidt

powerpc/oprofile: G4 oprofile has variable number of counters

For ppc750 processors which use 4 performance counters instead of the
6 G4 uses but otherwise is compatible with G4.
Signed-off-by: default avatarOctavian Purdila <opurdila@ixiacom.com>
Signed-off-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
parent 8f748aae
......@@ -29,7 +29,7 @@
static unsigned long reset_value[OP_MAX_COUNTER];
static int oprofile_running;
static u32 mmcr0_val, mmcr1_val, mmcr2_val;
static u32 mmcr0_val, mmcr1_val, mmcr2_val, num_pmcs;
#define MMCR0_PMC1_SHIFT 6
#define MMCR0_PMC2_SHIFT 0
......@@ -88,13 +88,12 @@ static int fsl7450_cpu_setup(struct op_counter_config *ctr)
mtspr(SPRN_MMCR0, mmcr0_val);
mtspr(SPRN_MMCR1, mmcr1_val);
mtspr(SPRN_MMCR2, mmcr2_val);
if (num_pmcs > 4)
mtspr(SPRN_MMCR2, mmcr2_val);
return 0;
}
#define NUM_CTRS 6
/* Configures the global settings for the countes on all CPUs. */
static int fsl7450_reg_setup(struct op_counter_config *ctr,
struct op_system_config *sys,
......@@ -102,12 +101,13 @@ static int fsl7450_reg_setup(struct op_counter_config *ctr,
{
int i;
num_pmcs = num_ctrs;
/* Our counters count up, and "count" refers to
* how much before the next interrupt, and we interrupt
* on overflow. So we calculate the starting value
* which will give us "count" until overflow.
* Then we set the events on the enabled counters */
for (i = 0; i < NUM_CTRS; ++i)
for (i = 0; i < num_ctrs; ++i)
reset_value[i] = 0x80000000UL - ctr[i].count;
/* Set events for Counters 1 & 2 */
......@@ -123,9 +123,10 @@ static int fsl7450_reg_setup(struct op_counter_config *ctr,
/* Set events for Counters 3-6 */
mmcr1_val = mmcr1_event3(ctr[2].event)
| mmcr1_event4(ctr[3].event)
| mmcr1_event5(ctr[4].event)
| mmcr1_event6(ctr[5].event);
| mmcr1_event4(ctr[3].event);
if (num_ctrs > 4)
mmcr1_val |= mmcr1_event5(ctr[4].event)
| mmcr1_event6(ctr[5].event);
mmcr2_val = 0;
......@@ -139,7 +140,7 @@ static int fsl7450_start(struct op_counter_config *ctr)
mtmsr(mfmsr() | MSR_PMM);
for (i = 0; i < NUM_CTRS; ++i) {
for (i = 0; i < num_pmcs; ++i) {
if (ctr[i].enabled)
classic_ctr_write(i, reset_value[i]);
else
......@@ -184,7 +185,7 @@ static void fsl7450_handle_interrupt(struct pt_regs *regs,
pc = mfspr(SPRN_SIAR);
is_kernel = is_kernel_addr(pc);
for (i = 0; i < NUM_CTRS; ++i) {
for (i = 0; i < num_pmcs; ++i) {
val = classic_ctr_read(i);
if (val < 0) {
if (oprofile_running && ctr[i].enabled) {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment