Commit f901aaad authored by Frank Wunderlich's avatar Frank Wunderlich Committed by Heiko Stuebner

arm64: dts: rockchip: Add Bananapi R2 Pro

This patch adds Devicetree for Bananapi R2 Pro based on RK3568.
Add uart/sd/emmc/i2c/rk809/tsadc nodes for basic function.
Gmac0 is directly connected to wan-port so usable without additional
driver.
On gmac1 there is a switch (rtl8367rb) connected which have not yet a
driver in mainline.

Patch also prepares nodes for GPIO header.
Co-developed-by: default avatarPeter Geis <pgwipeout@gmail.com>
Signed-off-by: default avatarPeter Geis <pgwipeout@gmail.com>
Signed-off-by: default avatarFrank Wunderlich <frank-w@public-files.de>
Link: https://lore.kernel.org/r/20220123135116.136846-3-linux@fw-web.deSigned-off-by: default avatarHeiko Stuebner <heiko@sntech.de>
parent 8ad88512
......@@ -58,3 +58,4 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399pro-rock-pi-n10.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-a.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Author: Frank Wunderlich <frank-w@public-files.de>
*
*/
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include "rk3568.dtsi"
/ {
model = "Bananapi-R2 Pro (RK3568) DDR4 Board";
compatible = "rockchip,rk3568-bpi-r2pro", "rockchip,rk3568";
aliases {
ethernet0 = &gmac0;
mmc0 = &sdmmc0;
mmc1 = &sdhci;
};
chosen: chosen {
stdout-path = "serial2:1500000n8";
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&blue_led_pin &green_led_pin>;
blue_led: led-0 {
color = <LED_COLOR_ID_BLUE>;
default-state = "off";
function = LED_FUNCTION_STATUS;
gpios = <&gpio0 RK_PD6 GPIO_ACTIVE_HIGH>;
};
green_led: led-1 {
color = <LED_COLOR_ID_GREEN>;
default-state = "on";
function = LED_FUNCTION_POWER;
gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
};
};
dc_12v: dc-12v {
compatible = "regulator-fixed";
regulator-name = "dc_12v";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <12000000>;
regulator-max-microvolt = <12000000>;
};
vcc3v3_sys: vcc3v3-sys {
compatible = "regulator-fixed";
regulator-name = "vcc3v3_sys";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&dc_12v>;
};
vcc5v0_sys: vcc5v0-sys {
compatible = "regulator-fixed";
regulator-name = "vcc5v0_sys";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&dc_12v>;
};
};
&gmac0 {
assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>;
clock_in_out = "input";
phy-handle = <&rgmii_phy0>;
phy-mode = "rgmii";
pinctrl-names = "default";
pinctrl-0 = <&gmac0_miim
&gmac0_tx_bus2
&gmac0_rx_bus2
&gmac0_rgmii_clk
&gmac0_rgmii_bus>;
snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
snps,reset-active-low;
/* Reset time is 20ms, 100ms for rtl8211f */
snps,reset-delays-us = <0 20000 100000>;
tx_delay = <0x3c>;
rx_delay = <0x2f>;
status = "okay";
};
&i2c0 {
status = "okay";
rk809: pmic@20 {
compatible = "rockchip,rk809";
reg = <0x20>;
interrupt-parent = <&gpio0>;
interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
#clock-cells = <1>;
pinctrl-names = "default";
pinctrl-0 = <&pmic_int>;
rockchip,system-power-controller;
vcc1-supply = <&vcc3v3_sys>;
vcc2-supply = <&vcc3v3_sys>;
vcc3-supply = <&vcc3v3_sys>;
vcc4-supply = <&vcc3v3_sys>;
vcc5-supply = <&vcc3v3_sys>;
vcc6-supply = <&vcc3v3_sys>;
vcc7-supply = <&vcc3v3_sys>;
vcc8-supply = <&vcc3v3_sys>;
vcc9-supply = <&vcc3v3_sys>;
wakeup-source;
regulators {
vdd_logic: DCDC_REG1 {
regulator-name = "vdd_logic";
regulator-always-on;
regulator-boot-on;
regulator-init-microvolt = <900000>;
regulator-initial-mode = <0x2>;
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1350000>;
regulator-ramp-delay = <6001>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_gpu: DCDC_REG2 {
regulator-name = "vdd_gpu";
regulator-init-microvolt = <900000>;
regulator-initial-mode = <0x2>;
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1350000>;
regulator-ramp-delay = <6001>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_ddr: DCDC_REG3 {
regulator-name = "vcc_ddr";
regulator-always-on;
regulator-boot-on;
regulator-initial-mode = <0x2>;
regulator-state-mem {
regulator-on-in-suspend;
};
};
vdd_npu: DCDC_REG4 {
regulator-name = "vdd_npu";
regulator-init-microvolt = <900000>;
regulator-initial-mode = <0x2>;
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1350000>;
regulator-ramp-delay = <6001>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_1v8: DCDC_REG5 {
regulator-name = "vcc_1v8";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdda0v9_image: LDO_REG1 {
regulator-name = "vdda0v9_image";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <900000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdda_0v9: LDO_REG2 {
regulator-name = "vdda_0v9";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <900000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdda0v9_pmu: LDO_REG3 {
regulator-name = "vdda0v9_pmu";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <900000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <900000>;
};
};
vccio_acodec: LDO_REG4 {
regulator-name = "vccio_acodec";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vccio_sd: LDO_REG5 {
regulator-name = "vccio_sd";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc3v3_pmu: LDO_REG6 {
regulator-name = "vcc3v3_pmu";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3300000>;
};
};
vcca_1v8: LDO_REG7 {
regulator-name = "vcca_1v8";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcca1v8_pmu: LDO_REG8 {
regulator-name = "vcca1v8_pmu";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
vcca1v8_image: LDO_REG9 {
regulator-name = "vcca1v8_image";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_3v3: SWITCH_REG1 {
regulator-name = "vcc_3v3";
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc3v3_sd: SWITCH_REG2 {
regulator-name = "vcc3v3_sd";
regulator-always-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
};
};
};
&i2c5 {
/* pin 3 (SDA) + 4 (SCL) of header con2 */
status = "disabled";
};
&mdio0 {
rgmii_phy0: ethernet-phy@0 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0x0>;
};
};
&pinctrl {
leds {
blue_led_pin: blue-led-pin {
rockchip,pins = <0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
};
green_led_pin: green-led-pin {
rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
pmic {
pmic_int: pmic_int {
rockchip,pins =
<0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
};
&pmu_io_domains {
pmuio1-supply = <&vcc3v3_pmu>;
pmuio2-supply = <&vcc3v3_pmu>;
vccio1-supply = <&vccio_acodec>;
vccio3-supply = <&vccio_sd>;
vccio4-supply = <&vcc_1v8>;
vccio5-supply = <&vcc_3v3>;
vccio6-supply = <&vcc_3v3>;
vccio7-supply = <&vcc_3v3>;
status = "okay";
};
&pwm8 {
/* fan 5v - gnd - pwm */
status = "okay";
};
&pwm10 {
/* pin 7 of header con2 */
status = "disabled";
};
&pwm11 {
/* pin 15 of header con2 */
status = "disabled";
};
&pwm12 {
/* pin 21 of header con2 */
/* shared with uart9 + spi3 */
pinctrl-0 = <&pwm12m1_pins>;
status = "disabled";
};
&pwm13 {
/* pin 24 of header con2 */
/* shared with uart9 */
pinctrl-0 = <&pwm13m1_pins>;
status = "disabled";
};
&pwm14 {
/* pin 23 of header con2 */
/* shared with spi3 */
pinctrl-0 = <&pwm14m1_pins>;
status = "disabled";
};
&pwm15 {
/* pin 19 of header con2 */
/* shared with spi3 */
pinctrl-0 = <&pwm15m1_pins>;
status = "disabled";
};
&saradc {
vref-supply = <&vcca_1v8>;
status = "okay";
};
&sdhci {
bus-width = <8>;
max-frequency = <200000000>;
non-removable;
pinctrl-names = "default";
pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
status = "okay";
};
&sdmmc0 {
bus-width = <4>;
cap-sd-highspeed;
cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
disable-wp;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
sd-uhs-sdr104;
vmmc-supply = <&vcc3v3_sd>;
vqmmc-supply = <&vccio_sd>;
status = "okay";
};
&spi3 {
/* pin 19 (MO) + 21 (MI) + 23 (CK) of header con2 */
/* shared with pwm12/14/15 and uart9 */
pinctrl-0 = <&spi3m1_pins>;
status = "disabled";
};
&tsadc {
status = "okay";
};
&uart0 {
/* pin 8 (TX) + 10 (RX) (RTS:16, CTS:18) of header con2 */
status = "disabled";
};
&uart2 {
/* debug-uart */
status = "okay";
};
&uart7 {
/* pin 11 (TX) + 13 (RX) of header con2 */
pinctrl-0 = <&uart7m1_xfer>;
status = "disabled";
};
&uart9 {
/* pin 21 (TX) + 24 (RX) of header con2 */
/* shared with pwm13 and pwm12/spi3 */
pinctrl-0 = <&uart9m1_xfer>;
status = "disabled";
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment