aacraid: IOCTL fix

After getting the platform shutdown command "VM_CloseAll" response from the
firmware, driver was getting configuration IOCTL request from the upper layers
and it sends down to firmware. This causes firmware assert issue.

This patch fixes the firmware assert issue. During the shutdown, if driver
gets commands from the upper layer, driver sends error code to the upper
layers.
Signed-off-by: Mahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Murthy Bhat <Murthy.Bhat@pmcs.com>
Signed-off-by: James Bottomley <JBottomley@Odin.com>

drivers/scsi/aacraid/aacraid.h

@@ -1222,6 +1222,7 @@ struct aac_dev
 	int			msi_enabled;	/* MSI/MSI-X enabled */
 	struct msix_entry	msixentry[AAC_MAX_MSIX];
 	struct aac_msix_ctx	aac_msix[AAC_MAX_MSIX]; /* context */
+	u8			adapter_shutdown;
 };
 
 #define aac_adapter_interrupt(dev) \

drivers/scsi/aacraid/comminit.c

@@ -231,6 +231,7 @@ int aac_send_shutdown(struct aac_dev * dev)
 	/* FIB should be freed only after getting the response from the F/W */
 	if (status != -ERESTARTSYS)
 		aac_fib_free(fibctx);
+	dev->adapter_shutdown = 1;
 	if ((dev->pdev->device == PMC_DEVICE_S7 ||
 	     dev->pdev->device == PMC_DEVICE_S8 ||
 	     dev->pdev->device == PMC_DEVICE_S9) &&
@@ -400,6 +401,7 @@ struct aac_dev *aac_init_adapter(struct aac_dev *dev)
 	}
 	dev->max_msix = 0;
 	dev->msi_enabled = 0;
+	dev->adapter_shutdown = 0;
 	if ((!aac_adapter_sync_cmd(dev, GET_COMM_PREFERRED_SETTINGS,
 	  0, 0, 0, 0, 0, 0,
 	  status+0, status+1, status+2, status+3, status+4))
@@ -511,6 +513,7 @@ static void aac_define_int_mode(struct aac_dev *dev)
 
 	int i, msi_count;
 
+	msi_count = i = 0;
 	/* max. vectors from GET_COMM_PREFERRED_SETTINGS */
 	if (dev->max_msix == 0 ||
 	    dev->pdev->device == PMC_DEVICE_S6 ||

drivers/scsi/aacraid/linit.c

@@ -713,7 +713,9 @@ static long aac_cfg_ioctl(struct file *file,
 		unsigned int cmd, unsigned long arg)
 {
 	int ret;
-	if (!capable(CAP_SYS_RAWIO))
+	struct aac_dev *aac;
+	aac = (struct aac_dev *)file->private_data;
+	if (!capable(CAP_SYS_RAWIO) || aac->adapter_shutdown)
 		return -EPERM;
 	mutex_lock(&aac_mutex);
 	ret = aac_do_ioctl(file->private_data, cmd, (void __user *)arg);