Commit fa090ab2 authored by H Hartley Sweeten's avatar H Hartley Sweeten Committed by Greg Kroah-Hartman

staging: comedi: cb_pcimdda: remove forward declarations

Move a couple of the functions in order to remove the need for
the forward declarations.

Also, remove the unnecessary comments.
Signed-off-by: default avatarH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 2a4b0ba5
...@@ -149,141 +149,12 @@ struct board_private_struct { ...@@ -149,141 +149,12 @@ struct board_private_struct {
}; };
static int ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data);
static int ao_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data);
/*---------------------------------------------------------------------------
HELPER FUNCTION DECLARATIONS
-----------------------------------------------------------------------------*/
/* returns a maxdata value for a given n_bits */ /* returns a maxdata value for a given n_bits */
static inline unsigned int figure_out_maxdata(int bits) static inline unsigned int figure_out_maxdata(int bits)
{ {
return ((unsigned int)1 << bits) - 1; return ((unsigned int)1 << bits) - 1;
} }
/*
* Probes for a supported device.
*
* Prerequisite: private be allocated already inside dev
*
* If the device is found, it returns 0 and has the following side effects:
*
* o assigns a struct pci_dev * to dev->private->pci_dev
* o assigns a struct board * to dev->board_ptr
* o sets dev->private->registers
* o sets dev->private->dio_registers
*
* Otherwise, returns a -errno on error
*/
static int probe(struct comedi_device *dev, const struct comedi_devconfig *it);
/*---------------------------------------------------------------------------
FUNCTION DEFINITIONS
-----------------------------------------------------------------------------*/
/*
* Attach is called by the Comedi core to configure the driver
* for a particular board. If you specified a board_name array
* in the driver structure, dev->board_ptr contains that
* address.
*/
static int attach(struct comedi_device *dev, struct comedi_devconfig *it)
{
const struct board_struct *thisboard;
struct board_private_struct *devpriv;
struct comedi_subdevice *s;
int err;
err = alloc_private(dev, sizeof(*devpriv));
if (err)
return err;
devpriv = dev->private;
/*
* If you can probe the device to determine what device in a series
* it is, this is the place to do it. Otherwise, dev->board_ptr
* should already be initialized.
*/
err = probe(dev, it);
if (err)
return err;
thisboard = comedi_board(dev);
/* Output some info */
printk("comedi%d: %s: ", dev->minor, thisboard->name);
/*
* Initialize dev->board_name. Note that we can use the "thisboard"
* macro now, since we just initialized it in the last line.
*/
dev->board_name = thisboard->name;
err = comedi_alloc_subdevices(dev, 2);
if (err)
return err;
s = dev->subdevices + 0;
/* analog output subdevice */
s->type = COMEDI_SUBD_AO;
s->subdev_flags = SDF_WRITABLE | SDF_READABLE;
s->n_chan = thisboard->ao_chans;
s->maxdata = figure_out_maxdata(thisboard->ao_bits);
/* this is hard-coded here */
if (it->options[2])
s->range_table = &range_bipolar10;
else
s->range_table = &range_bipolar5;
s->insn_write = &ao_winsn;
s->insn_read = &ao_rinsn;
s = dev->subdevices + 1;
/* digital i/o subdevice */
if (thisboard->dio_chans) {
switch (thisboard->dio_method) {
case DIO_8255:
/*
* this is a straight 8255, so register us with
* the 8255 driver
*/
subdev_8255_init(dev, s, NULL, devpriv->dio_registers);
devpriv->attached_to_8255 = 1;
break;
case DIO_INTERNAL:
default:
printk("DIO_INTERNAL not implemented yet!\n");
return -ENXIO;
break;
}
} else {
s->type = COMEDI_SUBD_UNUSED;
}
printk("attached\n");
return 1;
}
static void detach(struct comedi_device *dev)
{
struct board_private_struct *devpriv = dev->private;
if (devpriv) {
if (dev->subdevices && devpriv->attached_to_8255) {
subdev_8255_cleanup(dev, dev->subdevices + 2);
devpriv->attached_to_8255 = 0;
}
if (devpriv->pci_dev) {
if (devpriv->registers)
comedi_pci_disable(devpriv->pci_dev);
pci_dev_put(devpriv->pci_dev);
}
}
}
static int ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s, static int ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data) struct comedi_insn *insn, unsigned int *data)
{ {
...@@ -344,24 +215,6 @@ static int ao_rinsn(struct comedi_device *dev, struct comedi_subdevice *s, ...@@ -344,24 +215,6 @@ static int ao_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
return i; return i;
} }
/*---------------------------------------------------------------------------
HELPER FUNCTION DEFINITIONS
-----------------------------------------------------------------------------*/
/*
* Probes for a supported device.
*
* Prerequisite: private be allocated already inside dev
*
* If the device is found, it returns 0 and has the following side effects:
*
* o assigns a struct pci_dev * to dev->private->pci_dev
* o assigns a struct board * to dev->board_ptr
* o sets dev->private->registers
* o sets dev->private->dio_registers
*
* Otherwise, returns a -errno on error
*/
static int probe(struct comedi_device *dev, const struct comedi_devconfig *it) static int probe(struct comedi_device *dev, const struct comedi_devconfig *it)
{ {
const struct board_struct *thisboard; const struct board_struct *thisboard;
...@@ -411,6 +264,100 @@ static int probe(struct comedi_device *dev, const struct comedi_devconfig *it) ...@@ -411,6 +264,100 @@ static int probe(struct comedi_device *dev, const struct comedi_devconfig *it)
return -ENODEV; return -ENODEV;
} }
static int attach(struct comedi_device *dev, struct comedi_devconfig *it)
{
const struct board_struct *thisboard;
struct board_private_struct *devpriv;
struct comedi_subdevice *s;
int err;
err = alloc_private(dev, sizeof(*devpriv));
if (err)
return err;
devpriv = dev->private;
/*
* If you can probe the device to determine what device in a series
* it is, this is the place to do it. Otherwise, dev->board_ptr
* should already be initialized.
*/
err = probe(dev, it);
if (err)
return err;
thisboard = comedi_board(dev);
/* Output some info */
printk("comedi%d: %s: ", dev->minor, thisboard->name);
/*
* Initialize dev->board_name. Note that we can use the "thisboard"
* macro now, since we just initialized it in the last line.
*/
dev->board_name = thisboard->name;
err = comedi_alloc_subdevices(dev, 2);
if (err)
return err;
s = dev->subdevices + 0;
/* analog output subdevice */
s->type = COMEDI_SUBD_AO;
s->subdev_flags = SDF_WRITABLE | SDF_READABLE;
s->n_chan = thisboard->ao_chans;
s->maxdata = figure_out_maxdata(thisboard->ao_bits);
/* this is hard-coded here */
if (it->options[2])
s->range_table = &range_bipolar10;
else
s->range_table = &range_bipolar5;
s->insn_write = &ao_winsn;
s->insn_read = &ao_rinsn;
s = dev->subdevices + 1;
/* digital i/o subdevice */
if (thisboard->dio_chans) {
switch (thisboard->dio_method) {
case DIO_8255:
/*
* this is a straight 8255, so register us with
* the 8255 driver
*/
subdev_8255_init(dev, s, NULL, devpriv->dio_registers);
devpriv->attached_to_8255 = 1;
break;
case DIO_INTERNAL:
default:
printk("DIO_INTERNAL not implemented yet!\n");
return -ENXIO;
break;
}
} else {
s->type = COMEDI_SUBD_UNUSED;
}
printk("attached\n");
return 1;
}
static void detach(struct comedi_device *dev)
{
struct board_private_struct *devpriv = dev->private;
if (devpriv) {
if (dev->subdevices && devpriv->attached_to_8255) {
subdev_8255_cleanup(dev, dev->subdevices + 2);
devpriv->attached_to_8255 = 0;
}
if (devpriv->pci_dev) {
if (devpriv->registers)
comedi_pci_disable(devpriv->pci_dev);
pci_dev_put(devpriv->pci_dev);
}
}
}
static struct comedi_driver cb_pcimdda_driver = { static struct comedi_driver cb_pcimdda_driver = {
.driver_name = "cb_pcimdda", .driver_name = "cb_pcimdda",
.module = THIS_MODULE, .module = THIS_MODULE,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment