Commit fa200222 authored by Paul Walmsley's avatar Paul Walmsley

ARM: OMAP2+: hwmod: add support for blocking WFI when a device is active

Apparently, on some OMAPs, the MPU can't be allowed to enter WFI while
certain peripherals are active.  It's not clear why, and it's likely
that there is simply some other bug in the driver or integration code.
But since the likelihood that anyone will have the time to track these
problems down in the future seems quite small, we'll provide a
flag, HWMOD_BLOCK_WFI, to mark these issues in the hwmod data.
Signed-off-by: default avatarPaul Walmsley <paul@pwsan.com>
parent dd1e4223
...@@ -139,6 +139,8 @@ ...@@ -139,6 +139,8 @@
#include <linux/slab.h> #include <linux/slab.h>
#include <linux/bootmem.h> #include <linux/bootmem.h>
#include <asm/system_misc.h>
#include "clock.h" #include "clock.h"
#include "omap_hwmod.h" #include "omap_hwmod.h"
...@@ -2134,6 +2136,8 @@ static int _enable(struct omap_hwmod *oh) ...@@ -2134,6 +2136,8 @@ static int _enable(struct omap_hwmod *oh)
_enable_clocks(oh); _enable_clocks(oh);
if (soc_ops.enable_module) if (soc_ops.enable_module)
soc_ops.enable_module(oh); soc_ops.enable_module(oh);
if (oh->flags & HWMOD_BLOCK_WFI)
disable_hlt();
if (soc_ops.update_context_lost) if (soc_ops.update_context_lost)
soc_ops.update_context_lost(oh); soc_ops.update_context_lost(oh);
...@@ -2195,6 +2199,8 @@ static int _idle(struct omap_hwmod *oh) ...@@ -2195,6 +2199,8 @@ static int _idle(struct omap_hwmod *oh)
_idle_sysc(oh); _idle_sysc(oh);
_del_initiator_dep(oh, mpu_oh); _del_initiator_dep(oh, mpu_oh);
if (oh->flags & HWMOD_BLOCK_WFI)
enable_hlt();
if (soc_ops.disable_module) if (soc_ops.disable_module)
soc_ops.disable_module(oh); soc_ops.disable_module(oh);
...@@ -2303,6 +2309,8 @@ static int _shutdown(struct omap_hwmod *oh) ...@@ -2303,6 +2309,8 @@ static int _shutdown(struct omap_hwmod *oh)
if (oh->_state == _HWMOD_STATE_ENABLED) { if (oh->_state == _HWMOD_STATE_ENABLED) {
_del_initiator_dep(oh, mpu_oh); _del_initiator_dep(oh, mpu_oh);
/* XXX what about the other system initiators here? dma, dsp */ /* XXX what about the other system initiators here? dma, dsp */
if (oh->flags & HWMOD_BLOCK_WFI)
enable_hlt();
if (soc_ops.disable_module) if (soc_ops.disable_module)
soc_ops.disable_module(oh); soc_ops.disable_module(oh);
_disable_clocks(oh); _disable_clocks(oh);
......
...@@ -451,6 +451,14 @@ struct omap_hwmod_omap4_prcm { ...@@ -451,6 +451,14 @@ struct omap_hwmod_omap4_prcm {
* enabled. This prevents the hwmod code from being able to * enabled. This prevents the hwmod code from being able to
* enable and reset the IP block early. XXX Eventually it should * enable and reset the IP block early. XXX Eventually it should
* be possible to query the clock framework for this information. * be possible to query the clock framework for this information.
* HWMOD_BLOCK_WFI: Some OMAP peripherals apparently don't work
* correctly if the MPU is allowed to go idle while the
* peripherals are active. This is apparently true for the I2C on
* OMAP2420, and also the EMAC on AM3517/3505. It's unlikely that
* this is really true -- we're probably not configuring something
* correctly, or this is being abused to deal with some PM latency
* issues -- but we're currently suffering from a shortage of
* folks who are able to track these issues down properly.
*/ */
#define HWMOD_SWSUP_SIDLE (1 << 0) #define HWMOD_SWSUP_SIDLE (1 << 0)
#define HWMOD_SWSUP_MSTANDBY (1 << 1) #define HWMOD_SWSUP_MSTANDBY (1 << 1)
...@@ -462,6 +470,7 @@ struct omap_hwmod_omap4_prcm { ...@@ -462,6 +470,7 @@ struct omap_hwmod_omap4_prcm {
#define HWMOD_CONTROL_OPT_CLKS_IN_RESET (1 << 7) #define HWMOD_CONTROL_OPT_CLKS_IN_RESET (1 << 7)
#define HWMOD_16BIT_REG (1 << 8) #define HWMOD_16BIT_REG (1 << 8)
#define HWMOD_EXT_OPT_MAIN_CLK (1 << 9) #define HWMOD_EXT_OPT_MAIN_CLK (1 << 9)
#define HWMOD_BLOCK_WFI (1 << 10)
/* /*
* omap_hwmod._int_flags definitions * omap_hwmod._int_flags definitions
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment