staging: ks7010: change static function return type

Function has return type 'int'. Function has internal linkage. Function
returns 0 on all execution paths. Function is called only once in the
driver and the return value is not checked. Removal of this return
value does not change the program logic. The 'int' return type is not
adding any information thus it is better to remove it.

Change return type of function with internal linkage from 'int' to
'void'.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/ks7010/ks7010_sdio.c

@@ -169,23 +169,23 @@ void ks_wlan_hw_wakeup_request(struct ks_wlan_private *priv)
 	}
 }
 
-static int _ks_wlan_hw_power_save(struct ks_wlan_private *priv)
+static void _ks_wlan_hw_power_save(struct ks_wlan_private *priv)
 {
 	unsigned char rw_data;
 	int ret;
 
 	if (priv->reg.powermgt == POWMGT_ACTIVE_MODE)
-		return 0;
+		return;
 
 	if (priv->reg.operation_mode != MODE_INFRASTRUCTURE ||
 	    (priv->connect_status & CONNECT_STATUS_MASK) != CONNECT_STATUS)
-		return 0;
+		return;
 
 	if (priv->dev_state != DEVICE_STATE_SLEEP)
-		return 0;
+		return;
 
 	if (atomic_read(&priv->psstatus.status) == PS_SNOOZE)
-		return 0;
+		return;
 
 	DPRINTK(5, "\npsstatus.status=%d\npsstatus.confirm_wait=%d\npsstatus.snooze_guard=%d\ncnt_txqbody=%d\n",
 		atomic_read(&priv->psstatus.status),
@@ -193,40 +193,40 @@ static int _ks_wlan_hw_power_save(struct ks_wlan_private *priv)
 		atomic_read(&priv->psstatus.snooze_guard),
 		cnt_txqbody(priv));
 
-	if (!atomic_read(&priv->psstatus.confirm_wait) &&
-	    !atomic_read(&priv->psstatus.snooze_guard) &&
-	    !cnt_txqbody(priv)) {
-		ret = ks7010_sdio_read(priv, INT_PENDING, &rw_data,
-				       sizeof(rw_data));
+	if (atomic_read(&priv->psstatus.confirm_wait) ||
+	    atomic_read(&priv->psstatus.snooze_guard) ||
+	    cnt_txqbody(priv)) {
+		queue_delayed_work(priv->ks_wlan_hw.ks7010sdio_wq,
+				   &priv->ks_wlan_hw.rw_wq, 0);
+		return;
+	}
+
+	ret = ks7010_sdio_read(priv, INT_PENDING, &rw_data, sizeof(rw_data));
+	if (ret) {
+		DPRINTK(1, " error : INT_PENDING=%02X\n", rw_data);
+		queue_delayed_work(priv->ks_wlan_hw.ks7010sdio_wq,
+				   &priv->ks_wlan_hw.rw_wq, 1);
+		return;
+	}
+
+	if (!rw_data) {
+		rw_data = GCR_B_DOZE;
+		ret = ks7010_sdio_write(priv, GCR_B, &rw_data, sizeof(rw_data));
 		if (ret) {
-			DPRINTK(1, " error : INT_PENDING=%02X\n", rw_data);
-			queue_delayed_work(priv->ks_wlan_hw.ks7010sdio_wq,
-					   &priv->ks_wlan_hw.rw_wq, 1);
-			return 0;
-		}
-		if (!rw_data) {
-			rw_data = GCR_B_DOZE;
-			ret = ks7010_sdio_write(priv, GCR_B, &rw_data,
-						sizeof(rw_data));
-			if (ret) {
-				DPRINTK(1, " error : GCR_B=%02X\n", rw_data);
-				queue_delayed_work(priv->ks_wlan_hw.ks7010sdio_wq,
-						   &priv->ks_wlan_hw.rw_wq, 1);
-				return 0;
-			}
-			DPRINTK(4, "PMG SET!! : GCR_B=%02X\n", rw_data);
-			atomic_set(&priv->psstatus.status, PS_SNOOZE);
-			DPRINTK(3, "psstatus.status=PS_SNOOZE\n");
-		} else {
+			DPRINTK(1, " error : GCR_B=%02X\n", rw_data);
 			queue_delayed_work(priv->ks_wlan_hw.ks7010sdio_wq,
 					   &priv->ks_wlan_hw.rw_wq, 1);
+			return;
 		}
+		DPRINTK(4, "PMG SET!! : GCR_B=%02X\n", rw_data);
+		atomic_set(&priv->psstatus.status, PS_SNOOZE);
+		DPRINTK(3, "psstatus.status=PS_SNOOZE\n");
 	} else {
 		queue_delayed_work(priv->ks_wlan_hw.ks7010sdio_wq,
-				   &priv->ks_wlan_hw.rw_wq, 0);
+				   &priv->ks_wlan_hw.rw_wq, 1);
 	}
 
-	return 0;
+	return;
 }
 
 int ks_wlan_hw_power_save(struct ks_wlan_private *priv)