arm64: dts: qcom: sc7180: Add bandwidth votes for eMMC and SDcard

Add the bandwidth domain supporting performance state and
the corresponding OPP tables for the sdhc device on sc7180.
Signed-off-by: Pradeep P V K <ppvk@codeaurora.org>
Signed-off-by: Shaik Sajida Bhanu <sbhanu@codeaurora.org>
Link: https://lore.kernel.org/r/1597646464-1863-1-git-send-email-sbhanu@codeaurora.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arch/arm64/boot/dts/qcom/sc7180.dtsi

@@ -691,6 +691,9 @@ sdhc_1: sdhci@7c4000 {
 			clocks = <&gcc GCC_SDCC1_APPS_CLK>,
 					<&gcc GCC_SDCC1_AHB_CLK>;
 			clock-names = "core", "iface";
+			interconnects = <&aggre1_noc MASTER_EMMC 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_EMMC_CFG 0>;
+			interconnect-names = "sdhc-ddr","cpu-sdhc";
 			power-domains = <&rpmhpd SC7180_CX>;
 			operating-points-v2 = <&sdhc1_opp_table>;
 
@@ -711,11 +714,15 @@ sdhc1_opp_table: sdhc1-opp-table {
 				opp-100000000 {
 					opp-hz = /bits/ 64 <100000000>;
 					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <100000 100000>;
+					opp-avg-kBps = <100000 50000>;
 				};
 
 				opp-384000000 {
 					opp-hz = /bits/ 64 <384000000>;
 					required-opps = <&rpmhpd_opp_svs_l1>;
+					opp-peak-kBps = <600000 900000>;
+					opp-avg-kBps = <261438 300000>;
 				};
 			};
 		};
@@ -2516,6 +2523,10 @@ sdhc_2: sdhci@8804000 {
 			clocks = <&gcc GCC_SDCC2_APPS_CLK>,
 					<&gcc GCC_SDCC2_AHB_CLK>;
 			clock-names = "core", "iface";
+
+			interconnects = <&aggre1_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_SDCC_2 0>;
+			interconnect-names = "sdhc-ddr","cpu-sdhc";
 			power-domains = <&rpmhpd SC7180_CX>;
 			operating-points-v2 = <&sdhc2_opp_table>;
 
@@ -2529,11 +2540,15 @@ sdhc2_opp_table: sdhc2-opp-table {
 				opp-100000000 {
 					opp-hz = /bits/ 64 <100000000>;
 					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <160000 100000>;
+					opp-avg-kBps = <80000 50000>;
 				};
 
 				opp-202000000 {
 					opp-hz = /bits/ 64 <202000000>;
 					required-opps = <&rpmhpd_opp_svs_l1>;
+					opp-peak-kBps = <200000	120000>;
+					opp-avg-kBps = <100000 60000>;
 				};
 			};
 		};