Commit fac36a5a authored by Jean-Christophe PLAGNIOL-VILLARD's avatar Jean-Christophe PLAGNIOL-VILLARD Committed by Nicolas Ferre

ARM: at91/at91x40: remove use of at91_sys_read/write

Signed-off-by: default avatarJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: default avatarNicolas Ferre <nicolas.ferre@atmel.com>
parent 0d781716
......@@ -44,7 +44,7 @@ static void at91x40_idle(void)
* Disable the processor clock. The processor will be automatically
* re-enabled by an interrupt or by a reset.
*/
at91_sys_write(AT91_PS_CR, AT91_PS_CR_CPU);
__raw_writel(AT91_PS_CR_CPU, AT91_PS_CR);
cpu_do_idle();
}
......
......@@ -28,6 +28,12 @@
#include <asm/mach/time.h>
#include <mach/at91_tc.h>
#define at91_tc_read(field) \
__raw_readl(AT91_TC + field)
#define at91_tc_write(field, value) \
__raw_writel(value, AT91_TC + field);
/*
* 3 counter/timer units present.
*/
......@@ -37,12 +43,12 @@
static unsigned long at91x40_gettimeoffset(void)
{
return (at91_sys_read(AT91_TC + AT91_TC_CLK1BASE + AT91_TC_CV) * 1000000 / (AT91X40_MASTER_CLOCK / 128));
return (at91_tc_read(AT91_TC_CLK1BASE + AT91_TC_CV) * 1000000 / (AT91X40_MASTER_CLOCK / 128));
}
static irqreturn_t at91x40_timer_interrupt(int irq, void *dev_id)
{
at91_sys_read(AT91_TC + AT91_TC_CLK1BASE + AT91_TC_SR);
at91_tc_read(AT91_TC_CLK1BASE + AT91_TC_SR);
timer_tick();
return IRQ_HANDLED;
}
......@@ -57,20 +63,20 @@ void __init at91x40_timer_init(void)
{
unsigned int v;
at91_sys_write(AT91_TC + AT91_TC_BCR, 0);
v = at91_sys_read(AT91_TC + AT91_TC_BMR);
at91_tc_write(AT91_TC_BCR, 0);
v = at91_tc_read(AT91_TC_BMR);
v = (v & ~AT91_TC_TC1XC1S) | AT91_TC_TC1XC1S_NONE;
at91_sys_write(AT91_TC + AT91_TC_BMR, v);
at91_tc_write(AT91_TC_BMR, v);
at91_sys_write(AT91_TC + AT91_TC_CLK1BASE + AT91_TC_CCR, AT91_TC_CLKDIS);
at91_sys_write(AT91_TC + AT91_TC_CLK1BASE + AT91_TC_CMR, (AT91_TC_TIMER_CLOCK4 | AT91_TC_CPCTRG));
at91_sys_write(AT91_TC + AT91_TC_CLK1BASE + AT91_TC_IDR, 0xffffffff);
at91_sys_write(AT91_TC + AT91_TC_CLK1BASE + AT91_TC_RC, (AT91X40_MASTER_CLOCK / 128) / HZ - 1);
at91_sys_write(AT91_TC + AT91_TC_CLK1BASE + AT91_TC_IER, (1<<4));
at91_tc_write(AT91_TC_CLK1BASE + AT91_TC_CCR, AT91_TC_CLKDIS);
at91_tc_write(AT91_TC_CLK1BASE + AT91_TC_CMR, (AT91_TC_TIMER_CLOCK4 | AT91_TC_CPCTRG));
at91_tc_write(AT91_TC_CLK1BASE + AT91_TC_IDR, 0xffffffff);
at91_tc_write(AT91_TC_CLK1BASE + AT91_TC_RC, (AT91X40_MASTER_CLOCK / 128) / HZ - 1);
at91_tc_write(AT91_TC_CLK1BASE + AT91_TC_IER, (1<<4));
setup_irq(AT91X40_ID_TC1, &at91x40_timer_irq);
at91_sys_write(AT91_TC + AT91_TC_CLK1BASE + AT91_TC_CCR, (AT91_TC_SWTRG | AT91_TC_CLKEN));
at91_tc_write(AT91_TC_CLK1BASE + AT91_TC_CCR, (AT91_TC_SWTRG | AT91_TC_CLKEN));
}
struct sys_timer at91x40_timer = {
......
......@@ -28,18 +28,18 @@
#define AT91X40_ID_IRQ2 18 /* External IRQ 2 */
/*
* System Peripherals (offset from AT91_BASE_SYS)
* System Peripherals
*/
#define AT91_BASE_SYS 0xffc00000
#define AT91_EBI (0xffe00000 - AT91_BASE_SYS) /* External Bus Interface */
#define AT91_SF (0xfff00000 - AT91_BASE_SYS) /* Special Function */
#define AT91_USART1 (0xfffcc000 - AT91_BASE_SYS) /* USART 1 */
#define AT91_USART0 (0xfffd0000 - AT91_BASE_SYS) /* USART 0 */
#define AT91_TC (0xfffe0000 - AT91_BASE_SYS) /* Timer Counter */
#define AT91_PIOA (0xffff0000 - AT91_BASE_SYS) /* PIO Controller A */
#define AT91_PS (0xffff4000 - AT91_BASE_SYS) /* Power Save */
#define AT91_WD (0xffff8000 - AT91_BASE_SYS) /* Watchdog Timer */
#define AT91_EBI 0xffe00000 /* External Bus Interface */
#define AT91_SF 0xfff00000 /* Special Function */
#define AT91_USART1 0xfffcc000 /* USART 1 */
#define AT91_USART0 0xfffd0000 /* USART 0 */
#define AT91_TC 0xfffe0000 /* Timer Counter */
#define AT91_PIOA 0xffff0000 /* PIO Controller A */
#define AT91_PS 0xffff4000 /* Power Save */
#define AT91_WD 0xffff8000 /* Watchdog Timer */
/*
* The AT91x40 series doesn't have a debug unit like the other AT91 parts.
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment