Merge branch 'topic/aoa' into to-push

sound/aoa/codecs/Makefile

+snd-aoa-codec-onyx-objs := onyx.o
+snd-aoa-codec-tas-objs := tas.o
+snd-aoa-codec-toonie-objs := toonie.o
+
 obj-$(CONFIG_SND_AOA_ONYX) += snd-aoa-codec-onyx.o
 obj-$(CONFIG_SND_AOA_TAS) += snd-aoa-codec-tas.o
 obj-$(CONFIG_SND_AOA_TOONIE) += snd-aoa-codec-toonie.o

sound/aoa/codecs/snd-aoa-codec-onyx.c → sound/aoa/codecs/onyx.c

@@ -37,7 +37,7 @@ MODULE_AUTHOR("Johannes Berg <johannes@sipsolutions.net>");
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("pcm3052 (onyx) codec driver for snd-aoa");
 
-#include "snd-aoa-codec-onyx.h"
+#include "onyx.h"
 #include "../aoa.h"
 #include "../soundbus/soundbus.h"
 
@@ -292,7 +292,7 @@ static int onyx_snd_capture_source_put(struct snd_kcontrol *kcontrol,
 static struct snd_kcontrol_new capture_source_control = {
 	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
 	/* If we name this 'Input Source', it properly shows up in
-	 * alsamixer as a selection, * but it's shown under the 
+	 * alsamixer as a selection, * but it's shown under the
 	 * 'Playback' category.
 	 * If I name it 'Capture Source', it shows up in strange
 	 * ways (two bools of which one can be selected at a
@@ -477,7 +477,7 @@ static int onyx_spdif_mask_get(struct snd_kcontrol *kcontrol,
 
 	ucontrol->value.iec958.status[3] = 0x3f;
 	ucontrol->value.iec958.status[4] = 0x0f;
-	
+
 	return 0;
 }
 
@@ -682,7 +682,7 @@ static int onyx_usable(struct codec_info_item *cii,
 	onyx_read_register(onyx, ONYX_REG_DIG_INFO4, &v);
 	spdif_enabled = !!(v & ONYX_SPDIF_ENABLE);
 	onyx_read_register(onyx, ONYX_REG_DAC_CONTROL, &v);
-	analog_enabled = 
+	analog_enabled =
 		(v & (ONYX_MUTE_RIGHT|ONYX_MUTE_LEFT))
 		 != (ONYX_MUTE_RIGHT|ONYX_MUTE_LEFT);
 	mutex_unlock(&onyx->mutex);
@@ -882,7 +882,7 @@ static int onyx_init_codec(struct aoa_codec *codec)
 	msleep(1);
 	onyx->codec.gpio->methods->set_hw_reset(onyx->codec.gpio, 0);
 	msleep(1);
-	
+
 	if (onyx_register_init(onyx)) {
 		printk(KERN_ERR PFX "failed to initialise onyx registers\n");
 		return -ENODEV;
@@ -1069,7 +1069,7 @@ static int onyx_i2c_attach(struct i2c_adapter *adapter)
 
 	/* if that didn't work, try desperate mode for older
 	 * machines that have stuff missing from the device tree */
-	
+
 	if (!of_device_is_compatible(busnode, "k2-i2c"))
 		return -ENODEV;
 

sound/aoa/codecs/snd-aoa-codec-tas.c → sound/aoa/codecs/tas.c

@@ -71,9 +71,9 @@ MODULE_AUTHOR("Johannes Berg <johannes@sipsolutions.net>");
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("tas codec driver for snd-aoa");
 
-#include "snd-aoa-codec-tas.h"
-#include "snd-aoa-codec-tas-gain-table.h"
-#include "snd-aoa-codec-tas-basstreble.h"
+#include "tas.h"
+#include "tas-gain-table.h"
+#include "tas-basstreble.h"
 #include "../aoa.h"
 #include "../soundbus/soundbus.h"
 
@@ -880,7 +880,7 @@ static void tas_exit_codec(struct aoa_codec *codec)
 		return;
 	tas->codec.soundbus_dev->detach_codec(tas->codec.soundbus_dev, tas);
 }
-	
+
 
 static struct i2c_driver tas_driver;
 

sound/aoa/codecs/snd-aoa-codec-toonie.c → sound/aoa/codecs/toonie.c

@@ -131,7 +131,7 @@ static int __init toonie_init(void)
 	toonie->codec.owner = THIS_MODULE;
 	toonie->codec.init = toonie_init_codec;
 	toonie->codec.exit = toonie_exit_codec;
-                                        
+
 	if (aoa_codec_register(&toonie->codec)) {
 		kfree(toonie);
 		return -EINVAL;

sound/aoa/core/Makefile

 obj-$(CONFIG_SND_AOA) += snd-aoa.o
-snd-aoa-objs := snd-aoa-core.o \
-		snd-aoa-alsa.o \
-		snd-aoa-gpio-pmf.o \
-		snd-aoa-gpio-feature.o
+snd-aoa-objs := core.o \
+		alsa.o \
+		gpio-pmf.o \
+		gpio-feature.o

sound/aoa/core/snd-aoa-alsa.c → sound/aoa/core/alsa.c

@@ -6,7 +6,7 @@
  * GPL v2, can be found in COPYING.
  */
 #include <linux/module.h>
-#include "snd-aoa-alsa.h"
+#include "alsa.h"
 
 static int index = -1;
 module_param(index, int, 0444);
@@ -64,7 +64,7 @@ int aoa_snd_device_new(snd_device_type_t type,
 {
 	struct snd_card *card = aoa_get_card();
 	int err;
-	
+
 	if (!card) return -ENOMEM;
 
 	err = snd_device_new(card, type, device_data, ops);

sound/aoa/core/snd-aoa-core.c → sound/aoa/core/core.c

@@ -10,7 +10,7 @@
 #include <linux/module.h>
 #include <linux/list.h>
 #include "../aoa.h"
-#include "snd-aoa-alsa.h"
+#include "alsa.h"
 
 MODULE_DESCRIPTION("Apple Onboard Audio Sound Driver");
 MODULE_AUTHOR("Johannes Berg <johannes@sipsolutions.net>");

sound/aoa/core/snd-aoa-gpio-feature.c → sound/aoa/core/gpio-feature.c

@@ -5,7 +5,7 @@
  *
  * GPL v2, can be found in COPYING.
  *
- * This file contains the GPIO control routines for 
+ * This file contains the GPIO control routines for
  * direct (through feature calls) access to the GPIO
  * registers.
  */

sound/aoa/fabrics/Makefile

+snd-aoa-fabric-layout-objs += layout.o
+
 obj-$(CONFIG_SND_AOA_FABRIC_LAYOUT) += snd-aoa-fabric-layout.o

sound/aoa/fabrics/snd-aoa-fabric-layout.c → sound/aoa/fabrics/layout.c

@@ -66,7 +66,7 @@ struct layout {
 	unsigned int layout_id;
 	struct codec_connect_info codecs[MAX_CODECS_PER_BUS];
 	int flags;
-	
+
 	/* if busname is not assigned, we use 'Master' below,
 	 * so that our layout table doesn't need to be filled
 	 * too much.

sound/aoa/soundbus/i2sbus/Makefile

 obj-$(CONFIG_SND_AOA_SOUNDBUS_I2S) += snd-aoa-i2sbus.o
-snd-aoa-i2sbus-objs := i2sbus-core.o i2sbus-pcm.o i2sbus-control.o
+snd-aoa-i2sbus-objs := core.o pcm.o control.o

sound/aoa/soundbus/i2sbus/i2sbus-core.c → sound/aoa/soundbus/i2sbus/core.c

@@ -64,7 +64,7 @@ static void free_dbdma_descriptor_ring(struct i2sbus_dev *i2sdev,
 				       struct dbdma_command_mem *r)
 {
 	if (!r->space) return;
-	
+
 	dma_free_coherent(&macio_get_pci_dev(i2sdev->macio)->dev,
 			    r->size, r->space, r->bus_addr);
 }
@@ -247,7 +247,7 @@ static int i2sbus_add_dev(struct macio_dev *macio,
 		 * but request_resource doesn't know about parents and
 		 * contained resources...
 		 */
-		dev->allocated_resource[i] = 
+		dev->allocated_resource[i] =
 			request_mem_region(dev->resources[i].start,
 					   dev->resources[i].end -
 					   dev->resources[i].start + 1,

sound/aoa/soundbus/i2sbus/i2sbus.h

@@ -18,7 +18,7 @@
 #include <asm/pmac_feature.h>
 #include <asm/dbdma.h>
 
-#include "i2sbus-interface.h"
+#include "interface.h"
 #include "../soundbus.h"
 
 struct i2sbus_control {