Merge tag 'arm-late-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull more ARM SoC updates from Arnd Bergmann:
 "These updates came in after I had already tagged the branches, but
  they still seem appropriate for 6.0 and most of them were part of
  linux-next through other trees.

   - The reset controller tree adds one new driver for the TI TPS380x
     power management chip and a few minor changes in other drivers

   - Apple M1 now has a DT entry for the NVMe controller after the
     driver was merged, and has a new mailing list in the MAINTAINERS
     file.

   - Fixes for USB on the Socionext Uniphier platforms and the network
     controller on Intel Cyclone5"

* tag 'arm-late-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  arm64: dts: uniphier: Fix USB interrupts for PXs3 SoC
  ARM: dts: uniphier: Fix USB interrupts for PXs2 SoC
  arm64: dts: apple: t8103: Add ANS2 NVMe nodes
  reset: tps380x: Fix spelling mistake "Voltags" -> "Voltage"
  reset: tps380x: Add TPS380x device driver supprt
  dt-bindings: reset: Add TPS380x documentation
  dt-bindings: reset: renesas,rzg2l-usbphy-ctrl: Document RZ/G2UL USBPHY Control bindings
  ARM: dts: add EMAC AXI settings for Cyclone5
  reset: reset-simple should depends on HAS_IOMEM
  Revert "reset: microchip-sparx5: allow building as a module"
  reset: a10sr: allow building under COMPILE_TEST
  reset: allow building of reset simple driver if expert config selected
  reset: microchip-sparx5: allow building as a module
  arm64: dts: apple: Re-parent ANS2 power domains
  MAINTAINERS: add ARM/APPLE MACHINE mailing list

Documentation/devicetree/bindings/reset/renesas,rzg2l-usbphy-ctrl.yaml

@@ -17,6 +17,7 @@ properties:
   compatible:
     items:
       - enum:
+          - renesas,r9a07g043-usbphy-ctrl # RZ/G2UL
           - renesas,r9a07g044-usbphy-ctrl # RZ/G2{L,LC}
           - renesas,r9a07g054-usbphy-ctrl # RZ/V2L
       - const: renesas,rzg2l-usbphy-ctrl

Documentation/devicetree/bindings/reset/ti,tps380x-reset.yaml

+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/ti,tps380x-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI TPS380x reset controller node bindings
+
+maintainers:
+  - Marco Felsch <kernel@pengutronix.de>
+
+description: |
+  The TPS380x family [1] of supervisory circuits monitor supply voltages to
+  provide circuit initialization and timing supervision. The devices assert a
+  RESET signal if the voltage drops below a preset threshold or upon a manual
+  reset input (MR). The RESET output remains asserted for the factory
+  programmed delay after the voltage return above its threshold or after the
+  manual reset input is released.
+
+  [1] https://www.ti.com/product/TPS3801
+
+properties:
+  compatible:
+    enum:
+      - ti,tps3801
+
+  reset-gpios:
+    maxItems: 1
+    description: Reference to the GPIO connected to the MR pin.
+
+  "#reset-cells":
+    const: 0
+
+required:
+  - compatible
+  - reset-gpios
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    reset: reset-controller {
+        compatible = "ti,tps3801";
+        #reset-cells = <0>;
+        reset-gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
+    };
+...

MAINTAINERS

@@ -1850,6 +1850,7 @@ ARM/APPLE MACHINE SUPPORT
 M:	Hector Martin <marcan@marcan.st>
 M:	Sven Peter <sven@svenpeter.dev>
 R:	Alyssa Rosenzweig <alyssa@rosenzweig.io>
+L:	asahi@lists.linux.dev
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 W:	https://asahilinux.org

arch/arm/boot/dts/socfpga.dtsi

@@ -561,6 +561,12 @@ fpgamgr0: fpgamgr@ff706000 {
 			interrupts = <0 175 4>;
 		};
 
+		socfpga_axi_setup: stmmac-axi-config {
+			snps,wr_osr_lmt = <0xf>;
+			snps,rd_osr_lmt = <0xf>;
+			snps,blen = <0 0 0 0 16 0 0>;
+		};
+
 		gmac0: ethernet@ff700000 {
 			compatible = "altr,socfpga-stmmac", "snps,dwmac-3.70a", "snps,dwmac";
 			altr,sysmgr-syscon = <&sysmgr 0x60 0>;
@@ -576,6 +582,7 @@ gmac0: ethernet@ff700000 {
 			snps,perfect-filter-entries = <128>;
 			tx-fifo-depth = <4096>;
 			rx-fifo-depth = <4096>;
+			snps,axi-config = <&socfpga_axi_setup>;
 			status = "disabled";
 		};
 
@@ -594,6 +601,7 @@ gmac1: ethernet@ff702000 {
 			snps,perfect-filter-entries = <128>;
 			tx-fifo-depth = <4096>;
 			rx-fifo-depth = <4096>;
+			snps,axi-config = <&socfpga_axi_setup>;
 			status = "disabled";
 		};
 

arch/arm/boot/dts/uniphier-pxs2.dtsi

@@ -597,8 +597,8 @@ usb0: usb@65a00000 {
 			compatible = "socionext,uniphier-dwc3", "snps,dwc3";
 			status = "disabled";
 			reg = <0x65a00000 0xcd00>;
-			interrupt-names = "host", "peripheral";
-			interrupts = <0 134 4>, <0 135 4>;
+			interrupt-names = "dwc_usb3";
+			interrupts = <0 134 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb2>;
 			clock-names = "ref", "bus_early", "suspend";
@@ -693,8 +693,8 @@ usb1: usb@65c00000 {
 			compatible = "socionext,uniphier-dwc3", "snps,dwc3";
 			status = "disabled";
 			reg = <0x65c00000 0xcd00>;
-			interrupt-names = "host", "peripheral";
-			interrupts = <0 137 4>, <0 138 4>;
+			interrupt-names = "dwc_usb3";
+			interrupts = <0 137 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb1>, <&pinctrl_usb3>;
 			clock-names = "ref", "bus_early", "suspend";

arch/arm64/boot/dts/apple/t8103-pmgr.dtsi

@@ -725,11 +725,6 @@ ps_ans2: power-controller@3f0 {
 		#power-domain-cells = <0>;
 		#reset-cells = <0>;
 		label = "ans2";
-		/*
-		 * The ADT makes ps_apcie_st depend on ps_ans2 instead, but this
-		 * doesn't make much sense since ANS2 uses APCIE_ST.
-		 */
-		power-domains = <&ps_apcie_st>;
 	};
 
 	ps_gfx: power-controller@3f8 {
@@ -836,7 +831,7 @@ ps_apcie_st: power-controller@418 {
 		#power-domain-cells = <0>;
 		#reset-cells = <0>;
 		label = "apcie_st";
-		power-domains = <&ps_apcie>;
+		power-domains = <&ps_apcie>, <&ps_ans2>;
 	};
 
 	ps_ane_sys: power-controller@470 {

arch/arm64/boot/dts/apple/t8103.dtsi

@@ -378,6 +378,40 @@ pinctrl_aop: pinctrl@24a820000 {
 				     <AIC_IRQ 274 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		ans_mbox: mbox@277408000 {
+			compatible = "apple,t8103-asc-mailbox", "apple,asc-mailbox-v4";
+			reg = <0x2 0x77408000 0x0 0x4000>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 583 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 584 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 585 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 586 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "send-empty", "send-not-empty",
+				"recv-empty", "recv-not-empty";
+			#mbox-cells = <0>;
+			power-domains = <&ps_ans2>;
+		};
+
+		sart: iommu@27bc50000 {
+			compatible = "apple,t8103-sart";
+			reg = <0x2 0x7bc50000 0x0 0x10000>;
+			power-domains = <&ps_ans2>;
+		};
+
+		nvme@27bcc0000 {
+			compatible = "apple,t8103-nvme-ans2", "apple,nvme-ans2";
+			reg = <0x2 0x7bcc0000 0x0 0x40000>,
+				<0x2 0x77400000 0x0 0x4000>;
+			reg-names = "nvme", "ans";
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 590 IRQ_TYPE_LEVEL_HIGH>;
+			mboxes = <&ans_mbox>;
+			apple,sart = <&sart>;
+			power-domains = <&ps_ans2>, <&ps_apcie_st>;
+			power-domain-names = "ans", "apcie0";
+			resets = <&ps_ans2>;
+		};
+
 		pcie0_dart_0: dart@681008000 {
 			compatible = "apple,t8103-dart";
 			reg = <0x6 0x81008000 0x0 0x4000>;

arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi

@@ -599,8 +599,8 @@ usb0: usb@65a00000 {
 			compatible = "socionext,uniphier-dwc3", "snps,dwc3";
 			status = "disabled";
 			reg = <0x65a00000 0xcd00>;
-			interrupt-names = "host", "peripheral";
-			interrupts = <0 134 4>, <0 135 4>;
+			interrupt-names = "dwc_usb3";
+			interrupts = <0 134 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb2>;
 			clock-names = "ref", "bus_early", "suspend";
@@ -701,8 +701,8 @@ usb1: usb@65c00000 {
 			compatible = "socionext,uniphier-dwc3", "snps,dwc3";
 			status = "disabled";
 			reg = <0x65c00000 0xcd00>;
-			interrupt-names = "host", "peripheral";
-			interrupts = <0 137 4>, <0 138 4>;
+			interrupt-names = "dwc_usb3";
+			interrupts = <0 137 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb1>, <&pinctrl_usb3>;
 			clock-names = "ref", "bus_early", "suspend";

drivers/reset/Kconfig

@@ -17,7 +17,7 @@ if RESET_CONTROLLER
 
 config RESET_A10SR
 	tristate "Altera Arria10 System Resource Reset"
-	depends on MFD_ALTERA_A10SR
+	depends on MFD_ALTERA_A10SR || COMPILE_TEST
 	help
 	  This option enables support for the external reset functions for
 	  peripheral PHYs on the Altera Arria10 System Resource Chip.
@@ -200,8 +200,9 @@ config RESET_SCMI
 	  firmware controlling all the reset signals.
 
 config RESET_SIMPLE
-	bool "Simple Reset Controller Driver" if COMPILE_TEST
+	bool "Simple Reset Controller Driver" if COMPILE_TEST || EXPERT
 	default ARCH_ASPEED || ARCH_BCM4908 || ARCH_BITMAIN || ARCH_REALTEK || ARCH_STM32 || (ARCH_INTEL_SOCFPGA && ARM64) || ARCH_SUNXI || ARC
+	depends on HAS_IOMEM
 	help
 	  This enables a simple reset controller driver for reset lines that
 	  that can be asserted and deasserted by toggling bits in a contiguous,
@@ -265,6 +266,14 @@ config RESET_TI_SYSCON
 	  you wish to use the reset framework for such memory-mapped devices,
 	  say Y here. Otherwise, say N.
 
+config RESET_TI_TPS380X
+	tristate "TI TPS380x Reset Driver"
+	select GPIOLIB
+	help
+	  This enables the reset driver support for TI TPS380x devices. If
+	  you wish to use the reset framework for such devices, say Y here.
+	  Otherwise, say N.
+
 config RESET_TN48M_CPLD
 	tristate "Delta Networks TN48M switch CPLD reset controller"
 	depends on MFD_TN48M_CPLD || COMPILE_TEST

drivers/reset/Makefile

@@ -34,6 +34,7 @@ obj-$(CONFIG_RESET_SUNPLUS) += reset-sunplus.o
 obj-$(CONFIG_RESET_SUNXI) += reset-sunxi.o
 obj-$(CONFIG_RESET_TI_SCI) += reset-ti-sci.o
 obj-$(CONFIG_RESET_TI_SYSCON) += reset-ti-syscon.o
+obj-$(CONFIG_RESET_TI_TPS380X) += reset-tps380x.o
 obj-$(CONFIG_RESET_TN48M_CPLD) += reset-tn48m.o
 obj-$(CONFIG_RESET_UNIPHIER) += reset-uniphier.o
 obj-$(CONFIG_RESET_UNIPHIER_GLUE) += reset-uniphier-glue.o

drivers/reset/reset-tps380x.c

+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * TI TPS380x Supply Voltage Supervisor and Reset Controller Driver
+ *
+ * Copyright (C) 2022 Pengutronix, Marco Felsch <kernel@pengutronix.de>
+ *
+ * Based on Simple Reset Controller Driver
+ *
+ * Copyright (C) 2017 Pengutronix, Philipp Zabel <kernel@pengutronix.de>
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/reset-controller.h>
+
+struct tps380x_reset {
+	struct reset_controller_dev	rcdev;
+	struct gpio_desc		*reset_gpio;
+	unsigned int			reset_ms;
+};
+
+struct tps380x_reset_devdata {
+	unsigned int min_reset_ms;
+	unsigned int typ_reset_ms;
+	unsigned int max_reset_ms;
+};
+
+static inline
+struct tps380x_reset *to_tps380x_reset(struct reset_controller_dev *rcdev)
+{
+	return container_of(rcdev, struct tps380x_reset, rcdev);
+}
+
+static int
+tps380x_reset_assert(struct reset_controller_dev *rcdev, unsigned long id)
+{
+	struct tps380x_reset *tps380x = to_tps380x_reset(rcdev);
+
+	gpiod_set_value_cansleep(tps380x->reset_gpio, 1);
+
+	return 0;
+}
+
+static int
+tps380x_reset_deassert(struct reset_controller_dev *rcdev, unsigned long id)
+{
+	struct tps380x_reset *tps380x = to_tps380x_reset(rcdev);
+
+	gpiod_set_value_cansleep(tps380x->reset_gpio, 0);
+	msleep(tps380x->reset_ms);
+
+	return 0;
+}
+
+static const struct reset_control_ops reset_tps380x_ops = {
+	.assert		= tps380x_reset_assert,
+	.deassert	= tps380x_reset_deassert,
+};
+
+static int tps380x_reset_of_xlate(struct reset_controller_dev *rcdev,
+				  const struct of_phandle_args *reset_spec)
+{
+	/* No special handling needed, we have only one reset line per device */
+	return 0;
+}
+
+static int tps380x_reset_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	const struct tps380x_reset_devdata *devdata;
+	struct tps380x_reset *tps380x;
+
+	devdata = device_get_match_data(dev);
+	if (!devdata)
+		return -EINVAL;
+
+	tps380x = devm_kzalloc(dev, sizeof(*tps380x), GFP_KERNEL);
+	if (!tps380x)
+		return -ENOMEM;
+
+	tps380x->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(tps380x->reset_gpio))
+		return dev_err_probe(dev, PTR_ERR(tps380x->reset_gpio),
+				     "Failed to get GPIO\n");
+
+	tps380x->reset_ms = devdata->max_reset_ms;
+
+	tps380x->rcdev.ops = &reset_tps380x_ops;
+	tps380x->rcdev.owner = THIS_MODULE;
+	tps380x->rcdev.dev = dev;
+	tps380x->rcdev.of_node = dev->of_node;
+	tps380x->rcdev.of_reset_n_cells = 0;
+	tps380x->rcdev.of_xlate = tps380x_reset_of_xlate;
+	tps380x->rcdev.nr_resets = 1;
+
+	return devm_reset_controller_register(dev, &tps380x->rcdev);
+}
+
+static const struct tps380x_reset_devdata tps3801_reset_data = {
+	.min_reset_ms = 120,
+	.typ_reset_ms = 200,
+	.max_reset_ms = 280,
+};
+
+static const struct of_device_id tps380x_reset_dt_ids[] = {
+	{ .compatible = "ti,tps3801", .data = &tps3801_reset_data },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, tps380x_reset_dt_ids);
+
+static struct platform_driver tps380x_reset_driver = {
+	.probe	= tps380x_reset_probe,
+	.driver = {
+		.name		= "tps380x-reset",
+		.of_match_table	= tps380x_reset_dt_ids,
+	},
+};
+module_platform_driver(tps380x_reset_driver);
+
+MODULE_AUTHOR("Marco Felsch <kernel@pengutronix.de>");
+MODULE_DESCRIPTION("TI TPS380x Supply Voltage Supervisor and Reset Driver");
+MODULE_LICENSE("GPL v2");