wifi: ath11k: change interface combination for P2P mode

Current interface combination doesn't support P2P mode.

So change it for P2P mode.

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.37
Tested-on: QCA2066 hw2.1 PCI WLAN.HSP.1.1-03926.13-QCAHSPSWPL_V2_SILICONZ_CE-2.52297.2
Signed-off-by: Kang Yang <quic_kangyang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240228093537.25052-2-quic_kangyang@quicinc.com

drivers/net/wireless/ath/ath11k/mac.c

@@ -9850,12 +9850,18 @@ static int ath11k_mac_setup_iface_combinations(struct ath11k *ar)
 	struct ieee80211_iface_combination *combinations;
 	struct ieee80211_iface_limit *limits;
 	int n_limits;
+	bool p2p;
+
+	p2p = ab->hw_params.interface_modes & BIT(NL80211_IFTYPE_P2P_DEVICE);
 
 	combinations = kzalloc(sizeof(*combinations), GFP_KERNEL);
 	if (!combinations)
 		return -ENOMEM;
 
-	n_limits = 2;
+	if (p2p)
+		n_limits = 3;
+	else
+		n_limits = 2;
 
 	limits = kcalloc(n_limits, sizeof(*limits), GFP_KERNEL);
 	if (!limits) {
@@ -9863,39 +9869,29 @@ static int ath11k_mac_setup_iface_combinations(struct ath11k *ar)
 		return -ENOMEM;
 	}
 
+	limits[0].types |= BIT(NL80211_IFTYPE_STATION);
+	limits[1].types |= BIT(NL80211_IFTYPE_AP);
+	if (IS_ENABLED(CONFIG_MAC80211_MESH) &&
+	    ab->hw_params.interface_modes & BIT(NL80211_IFTYPE_MESH_POINT))
+		limits[1].types |= BIT(NL80211_IFTYPE_MESH_POINT);
+
+	combinations[0].limits = limits;
+	combinations[0].n_limits = n_limits;
+	combinations[0].beacon_int_infra_match = true;
+	combinations[0].beacon_int_min_gcd = 100;
+
 	if (ab->hw_params.support_dual_stations) {
 		limits[0].max = 2;
-		limits[0].types |= BIT(NL80211_IFTYPE_STATION);
-
 		limits[1].max = 1;
-		limits[1].types |= BIT(NL80211_IFTYPE_AP);
-		if (IS_ENABLED(CONFIG_MAC80211_MESH) &&
-		    ab->hw_params.interface_modes & BIT(NL80211_IFTYPE_MESH_POINT))
-			limits[1].types |= BIT(NL80211_IFTYPE_MESH_POINT);
 
-		combinations[0].limits = limits;
-		combinations[0].n_limits = 2;
 		combinations[0].max_interfaces = ab->hw_params.num_vdevs;
 		combinations[0].num_different_channels = 2;
-		combinations[0].beacon_int_infra_match = true;
-		combinations[0].beacon_int_min_gcd = 100;
 	} else {
 		limits[0].max = 1;
-		limits[0].types |= BIT(NL80211_IFTYPE_STATION);
-
 		limits[1].max = 16;
-		limits[1].types |= BIT(NL80211_IFTYPE_AP);
-
-		if (IS_ENABLED(CONFIG_MAC80211_MESH) &&
-		    ab->hw_params.interface_modes & BIT(NL80211_IFTYPE_MESH_POINT))
-			limits[1].types |= BIT(NL80211_IFTYPE_MESH_POINT);
 
-		combinations[0].limits = limits;
-		combinations[0].n_limits = 2;
 		combinations[0].max_interfaces = 16;
 		combinations[0].num_different_channels = 1;
-		combinations[0].beacon_int_infra_match = true;
-		combinations[0].beacon_int_min_gcd = 100;
 		combinations[0].radar_detect_widths = BIT(NL80211_CHAN_WIDTH_20_NOHT) |
 							BIT(NL80211_CHAN_WIDTH_20) |
 							BIT(NL80211_CHAN_WIDTH_40) |
@@ -9904,6 +9900,13 @@ static int ath11k_mac_setup_iface_combinations(struct ath11k *ar)
 							BIT(NL80211_CHAN_WIDTH_160);
 	}
 
+	if (p2p) {
+		limits[1].types |= BIT(NL80211_IFTYPE_P2P_CLIENT) |
+			BIT(NL80211_IFTYPE_P2P_GO);
+		limits[2].max = 1;
+		limits[2].types |= BIT(NL80211_IFTYPE_P2P_DEVICE);
+	}
+
 	ar->hw->wiphy->iface_combinations = combinations;
 	ar->hw->wiphy->n_iface_combinations = 1;