Commit fb0cc8d1 authored by Douglas Gilbert's avatar Douglas Gilbert Committed by Martin K. Petersen

scsi_debug: fix sleep in invalid context

In this post: http://www.spinics.net/lists/linux-scsi/msg97124.html the
author shows some kernel infrastructure complaining about a sleep in an
invalid context. Remove offending call to vmalloc().  Instead of using
kzalloc() which reviewers didn't like, use a bucket system (64 bytes on
the stack) and potentially multiple calls to sg_pcopy_from_buffer() to
construct the 'data-in' buffer for the SCSI REPORT LUNS command.
Signed-off-by: default avatarDouglas Gilbert <dgilbert@interlog.com>
Acked-by: default avatarChristoph Hellwig <hch@lst.de>
Reviewed-by: default avatarBart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
parent baa6719f
......@@ -890,7 +890,7 @@ static int make_ua(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
return 0;
}
/* Returns 0 if ok else (DID_ERROR << 16). Sets scp->resid . */
/* Build SCSI "data-in" buffer. Returns 0 if ok else (DID_ERROR << 16). */
static int fill_from_dev_buffer(struct scsi_cmnd *scp, unsigned char *arr,
int arr_len)
{
......@@ -909,7 +909,35 @@ static int fill_from_dev_buffer(struct scsi_cmnd *scp, unsigned char *arr,
return 0;
}
/* Returns number of bytes fetched into 'arr' or -1 if error. */
/* Partial build of SCSI "data-in" buffer. Returns 0 if ok else
* (DID_ERROR << 16). Can write to offset in data-in buffer. If multiple
* calls, not required to write in ascending offset order. Assumes resid
* set to scsi_bufflen() prior to any calls.
*/
static int p_fill_from_dev_buffer(struct scsi_cmnd *scp, const void *arr,
int arr_len, unsigned int off_dst)
{
int act_len, n;
struct scsi_data_buffer *sdb = scsi_in(scp);
off_t skip = off_dst;
if (sdb->length <= off_dst)
return 0;
if (!(scsi_bidi_cmnd(scp) || scp->sc_data_direction == DMA_FROM_DEVICE))
return DID_ERROR << 16;
act_len = sg_pcopy_from_buffer(sdb->table.sgl, sdb->table.nents,
arr, arr_len, skip);
pr_debug("%s: off_dst=%u, scsi_bufflen=%u, act_len=%u, resid=%d\n",
__func__, off_dst, scsi_bufflen(scp), act_len, sdb->resid);
n = (int)scsi_bufflen(scp) - ((int)off_dst + act_len);
sdb->resid = min(sdb->resid, n);
return 0;
}
/* Fetches from SCSI "data-out" buffer. Returns number of bytes fetched into
* 'arr' or -1 if error.
*/
static int fetch_to_dev_buffer(struct scsi_cmnd *scp, unsigned char *arr,
int arr_len)
{
......@@ -3269,6 +3297,8 @@ static int resp_get_lba_status(struct scsi_cmnd *scp,
return fill_from_dev_buffer(scp, arr, SDEBUG_GET_LBA_STATUS_LEN);
}
#define RL_BUCKET_ELEMS 8
/* Even though each pseudo target has a REPORT LUNS "well known logical unit"
* (W-LUN), the normal Linux scanning logic does not associate it with a
* device (e.g. /dev/sg7). The following magic will make that association:
......@@ -3285,12 +3315,14 @@ static int resp_report_luns(struct scsi_cmnd *scp,
unsigned char select_report;
u64 lun;
struct scsi_lun *lun_p;
u8 *arr;
u8 arr[RL_BUCKET_ELEMS * sizeof(struct scsi_lun)];
unsigned int lun_cnt; /* normal LUN count (max: 256) */
unsigned int wlun_cnt; /* report luns W-LUN count */
unsigned int tlun_cnt; /* total LUN count */
unsigned int rlen; /* response length (in bytes) */
int i, res;
int k, j, n, res;
unsigned int off_rsp = 0;
const int sz_lun = sizeof(struct scsi_lun);
clear_luns_changed_on_target(devip);
......@@ -3329,33 +3361,40 @@ static int resp_report_luns(struct scsi_cmnd *scp,
--lun_cnt;
tlun_cnt = lun_cnt + wlun_cnt;
rlen = (tlun_cnt * sizeof(struct scsi_lun)) + 8;
arr = vmalloc(rlen);
if (!arr) {
mk_sense_buffer(scp, ILLEGAL_REQUEST, INSUFF_RES_ASC,
INSUFF_RES_ASCQ);
return check_condition_result;
}
memset(arr, 0, rlen);
rlen = tlun_cnt * sz_lun; /* excluding 8 byte header */
scsi_set_resid(scp, scsi_bufflen(scp));
pr_debug("select_report %d luns = %d wluns = %d no_lun0 %d\n",
select_report, lun_cnt, wlun_cnt, sdebug_no_lun_0);
/* luns start at byte 8 in response following the header */
lun_p = (struct scsi_lun *)&arr[8];
/* LUNs use single level peripheral device addressing method */
/* loops rely on sizeof response header same as sizeof lun (both 8) */
lun = sdebug_no_lun_0 ? 1 : 0;
for (i = 0; i < lun_cnt; i++)
int_to_scsilun(lun++, lun_p++);
if (wlun_cnt)
int_to_scsilun(SCSI_W_LUN_REPORT_LUNS, lun_p++);
put_unaligned_be32(rlen - 8, &arr[0]);
res = fill_from_dev_buffer(scp, arr, rlen);
vfree(arr);
for (k = 0, j = 0, res = 0; true; ++k, j = 0) {
memset(arr, 0, sizeof(arr));
lun_p = (struct scsi_lun *)&arr[0];
if (k == 0) {
put_unaligned_be32(rlen, &arr[0]);
++lun_p;
j = 1;
}
for ( ; j < RL_BUCKET_ELEMS; ++j, ++lun_p) {
if ((k * RL_BUCKET_ELEMS) + j > lun_cnt)
break;
int_to_scsilun(lun++, lun_p);
}
if (j < RL_BUCKET_ELEMS)
break;
n = j * sz_lun;
res = p_fill_from_dev_buffer(scp, arr, n, off_rsp);
if (res)
return res;
off_rsp += n;
}
if (wlun_cnt) {
int_to_scsilun(SCSI_W_LUN_REPORT_LUNS, lun_p);
++j;
}
if (j > 0)
res = p_fill_from_dev_buffer(scp, arr, j * sz_lun, off_rsp);
return res;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment