Commit fb2af002 authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-arm

Pull ARM updates from Russell King:
 "This contains the usual updates from other people (listed below) and
  the usual random muddle of miscellaneous ARM updates which cover some
  low priority bug fixes and performance improvements.

  I've started to put the pull request wording into the merge commits,
  which are:

   - NoMMU stuff:

     This includes the following series sent earlier to the list:
      - nommu-fixes
      - R7 Support
      - MPU support

     I've left out the ARCH_MULTIPLATFORM/!MMU stuff that Arnd and I
     were discussing today until we've reached a conclusion/that's had
     some more review.

     This is rebased (and re-tested) on your devel-stable branch because
     otherwise there were going to be conflicts with Uwe's V7M work now
     that you've merged that.  I've included the fix for limiting MPU to
     CPU_V7.

   - Huge page support

     These changes bring both HugeTLB support and Transparent HugePage
     (THP) support to ARM.  Only long descriptors (LPAE) are supported
     in this series.

     The code has been tested on an Arndale board (Exynos 5250).

   - LPAE updates

     Please pull these miscellaneous LPAE fixes I've been collecting for
     a while now for 3.11.  They've been tested and reviewed by quite a
     few people, and most of the patches are pretty trivial.  -- Will Deacon.

   - arch_timer cleanups

     Please pull these arch_timer cleanups I've been holding onto for a
     while.  They're the same as my last posting, but have been rebased
     to v3.10-rc3.

   - mpidr linearisation (multiprocessor id register - identifies which
     CPU number we are in the system)

     This patch series that implements MPIDR linearization through a
     simple hashing algorithm and updates current cpu_{suspend}/{resume}
     code to use the newly created hash structures to retrieve context
     pointers.  It represents a stepping stone for the implementation of
     power management code on forthcoming multi-cluster ARM systems.

     It has been tested on TC2 (dual cluster A15xA7 system), iMX6q,
     OMAP4 and Tegra, with processors hitting low-power states requiring
     warm-boot resume through the cpu_resume code path"

* 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (77 commits)
  ARM: 7775/1: mm: Remove do_sect_fault from LPAE code
  ARM: 7777/1: Avoid extra calls to the C compiler
  ARM: 7774/1: Fix dtb dependency to use order-only prerequisites
  ARM: 7770/1: remove residual ARMv2 support from decompressor
  ARM: 7769/1: Cortex-A15: fix erratum 798181 implementation
  ARM: 7768/1: prevent risks of out-of-bound access in ASID allocator
  ARM: 7767/1: let the ASID allocator handle suspended animation
  ARM: 7766/1: versatile: don't mark pen as __INIT
  ARM: 7765/1: perf: Record the user-mode PC in the call chain.
  ARM: 7735/2: Preserve the user r/w register TPIDRURW on context switch and fork
  ARM: kernel: implement stack pointer save array through MPIDR hashing
  ARM: kernel: build MPIDR hash function data structure
  ARM: mpu: Ensure that MPU depends on CPU_V7
  ARM: mpu: protect the vectors page with an MPU region
  ARM: mpu: Allow enabling of the MPU via kconfig
  ARM: 7758/1: introduce config HAS_BANDGAP
  ARM: 7757/1: mm: don't flush icache in switch_mm with hardware broadcasting
  ARM: 7751/1: zImage: don't overwrite ourself with a page table
  ARM: 7749/1: spinlock: retry trylock operation if strex fails on free lock
  ARM: 7748/1: oabi: handle faults when loading swi instruction from userspace
  ...
parents 790eac56 3c0c01ab
......@@ -16,6 +16,9 @@ Required properties:
performs the same operation).
"marvell,"aurora-outer-cache: Marvell Controller designed to be
compatible with the ARM one with outer cache mode.
"bcm,bcm11351-a2-pl310-cache": For Broadcom bcm11351 chipset where an
offset needs to be added to the address before passing down to the L2
cache controller
- cache-unified : Specifies the cache is a unified cache.
- cache-level : Should be set to 2 for a level 2 cache.
- reg : Physical base address and size of cache controller's memory mapped
......
......@@ -175,6 +175,9 @@ config ARCH_HAS_CPUFREQ
and that the relevant menu configurations are displayed for
it.
config ARCH_HAS_BANDGAP
bool
config GENERIC_HWEIGHT
bool
default y
......@@ -1450,7 +1453,7 @@ config SMP
depends on CPU_V6K || CPU_V7
depends on GENERIC_CLOCKEVENTS
depends on HAVE_SMP
depends on MMU
depends on MMU || ARM_MPU
select USE_GENERIC_SMP_HELPERS
help
This enables support for systems with more than one CPU. If you have
......@@ -1471,7 +1474,7 @@ config SMP
config SMP_ON_UP
bool "Allow booting SMP kernel on uniprocessor systems (EXPERIMENTAL)"
depends on SMP && !XIP_KERNEL
depends on SMP && !XIP_KERNEL && MMU
default y
help
SMP kernels contain instructions which fail on non-SMP processors.
......@@ -1744,6 +1747,14 @@ config HW_PERF_EVENTS
Enable hardware performance counter support for perf events. If
disabled, perf events will use software events only.
config SYS_SUPPORTS_HUGETLBFS
def_bool y
depends on ARM_LPAE
config HAVE_ARCH_TRANSPARENT_HUGEPAGE
def_bool y
depends on ARM_LPAE
source "mm/Kconfig"
config FORCE_MAX_ZONEORDER
......
......@@ -50,3 +50,15 @@ config REMAP_VECTORS_TO_RAM
Otherwise, say 'y' here. In this case, the kernel will require
external support to redirect the hardware exception vectors to
the writable versions located at DRAM_BASE.
config ARM_MPU
bool 'Use the ARM v7 PMSA Compliant MPU'
depends on CPU_V7
default y
help
Some ARM systems without an MMU have instead a Memory Protection
Unit (MPU) that defines the type and permissions for regions of
memory.
If your CPU has an MPU then you should choose 'y' here unless you
know that you do not want to use the MPU.
......@@ -550,6 +550,13 @@ choice
of the tiles using the RS1 memory map, including all new A-class
core tiles, FPGA-based SMMs and software models.
config DEBUG_VEXPRESS_UART0_CRX
bool "Use PL011 UART0 at 0xb0090000 (Cortex-R compliant tiles)"
depends on ARCH_VEXPRESS && !MMU
help
This option selects UART0 at 0xb0090000. This is appropriate for
Cortex-R series tiles and SMMs, such as Cortex-R5 and Cortex-R7
config DEBUG_VT8500_UART0
bool "Use UART0 on VIA/Wondermedia SoCs"
depends on ARCH_VT8500
......@@ -789,7 +796,8 @@ config DEBUG_LL_INCLUDE
default "debug/u300.S" if DEBUG_U300_UART
default "debug/ux500.S" if DEBUG_UX500_UART
default "debug/vexpress.S" if DEBUG_VEXPRESS_UART0_DETECT || \
DEBUG_VEXPRESS_UART0_CA9 || DEBUG_VEXPRESS_UART0_RS1
DEBUG_VEXPRESS_UART0_CA9 || DEBUG_VEXPRESS_UART0_RS1 || \
DEBUG_VEXPRESS_UART0_CRX
default "debug/vt8500.S" if DEBUG_VT8500_UART0
default "debug/zynq.S" if DEBUG_ZYNQ_UART0 || DEBUG_ZYNQ_UART1
default "mach/debug-macro.S"
......
......@@ -59,38 +59,44 @@ comma = ,
# Note that GCC does not numerically define an architecture version
# macro, but instead defines a whole series of macros which makes
# testing for a specific architecture or later rather impossible.
arch-$(CONFIG_CPU_32v7M) :=-D__LINUX_ARM_ARCH__=7 -march=armv7-m -Wa,-march=armv7-m
arch-$(CONFIG_CPU_32v7) :=-D__LINUX_ARM_ARCH__=7 $(call cc-option,-march=armv7-a,-march=armv5t -Wa$(comma)-march=armv7-a)
arch-$(CONFIG_CPU_32v6) :=-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6,-march=armv5t -Wa$(comma)-march=armv6)
arch-$(CONFIG_CPU_32v7M) =-D__LINUX_ARM_ARCH__=7 -march=armv7-m -Wa,-march=armv7-m
arch-$(CONFIG_CPU_32v7) =-D__LINUX_ARM_ARCH__=7 $(call cc-option,-march=armv7-a,-march=armv5t -Wa$(comma)-march=armv7-a)
arch-$(CONFIG_CPU_32v6) =-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6,-march=armv5t -Wa$(comma)-march=armv6)
# Only override the compiler option if ARMv6. The ARMv6K extensions are
# always available in ARMv7
ifeq ($(CONFIG_CPU_32v6),y)
arch-$(CONFIG_CPU_32v6K) :=-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6k,-march=armv5t -Wa$(comma)-march=armv6k)
arch-$(CONFIG_CPU_32v6K) =-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6k,-march=armv5t -Wa$(comma)-march=armv6k)
endif
arch-$(CONFIG_CPU_32v5) :=-D__LINUX_ARM_ARCH__=5 $(call cc-option,-march=armv5te,-march=armv4t)
arch-$(CONFIG_CPU_32v4T) :=-D__LINUX_ARM_ARCH__=4 -march=armv4t
arch-$(CONFIG_CPU_32v4) :=-D__LINUX_ARM_ARCH__=4 -march=armv4
arch-$(CONFIG_CPU_32v3) :=-D__LINUX_ARM_ARCH__=3 -march=armv3
arch-$(CONFIG_CPU_32v5) =-D__LINUX_ARM_ARCH__=5 $(call cc-option,-march=armv5te,-march=armv4t)
arch-$(CONFIG_CPU_32v4T) =-D__LINUX_ARM_ARCH__=4 -march=armv4t
arch-$(CONFIG_CPU_32v4) =-D__LINUX_ARM_ARCH__=4 -march=armv4
arch-$(CONFIG_CPU_32v3) =-D__LINUX_ARM_ARCH__=3 -march=armv3
# Evaluate arch cc-option calls now
arch-y := $(arch-y)
# This selects how we optimise for the processor.
tune-$(CONFIG_CPU_ARM7TDMI) :=-mtune=arm7tdmi
tune-$(CONFIG_CPU_ARM720T) :=-mtune=arm7tdmi
tune-$(CONFIG_CPU_ARM740T) :=-mtune=arm7tdmi
tune-$(CONFIG_CPU_ARM9TDMI) :=-mtune=arm9tdmi
tune-$(CONFIG_CPU_ARM940T) :=-mtune=arm9tdmi
tune-$(CONFIG_CPU_ARM946E) :=$(call cc-option,-mtune=arm9e,-mtune=arm9tdmi)
tune-$(CONFIG_CPU_ARM920T) :=-mtune=arm9tdmi
tune-$(CONFIG_CPU_ARM922T) :=-mtune=arm9tdmi
tune-$(CONFIG_CPU_ARM925T) :=-mtune=arm9tdmi
tune-$(CONFIG_CPU_ARM926T) :=-mtune=arm9tdmi
tune-$(CONFIG_CPU_FA526) :=-mtune=arm9tdmi
tune-$(CONFIG_CPU_SA110) :=-mtune=strongarm110
tune-$(CONFIG_CPU_SA1100) :=-mtune=strongarm1100
tune-$(CONFIG_CPU_XSCALE) :=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
tune-$(CONFIG_CPU_XSC3) :=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
tune-$(CONFIG_CPU_FEROCEON) :=$(call cc-option,-mtune=marvell-f,-mtune=xscale)
tune-$(CONFIG_CPU_V6) :=$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm)
tune-$(CONFIG_CPU_V6K) :=$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm)
tune-$(CONFIG_CPU_ARM7TDMI) =-mtune=arm7tdmi
tune-$(CONFIG_CPU_ARM720T) =-mtune=arm7tdmi
tune-$(CONFIG_CPU_ARM740T) =-mtune=arm7tdmi
tune-$(CONFIG_CPU_ARM9TDMI) =-mtune=arm9tdmi
tune-$(CONFIG_CPU_ARM940T) =-mtune=arm9tdmi
tune-$(CONFIG_CPU_ARM946E) =$(call cc-option,-mtune=arm9e,-mtune=arm9tdmi)
tune-$(CONFIG_CPU_ARM920T) =-mtune=arm9tdmi
tune-$(CONFIG_CPU_ARM922T) =-mtune=arm9tdmi
tune-$(CONFIG_CPU_ARM925T) =-mtune=arm9tdmi
tune-$(CONFIG_CPU_ARM926T) =-mtune=arm9tdmi
tune-$(CONFIG_CPU_FA526) =-mtune=arm9tdmi
tune-$(CONFIG_CPU_SA110) =-mtune=strongarm110
tune-$(CONFIG_CPU_SA1100) =-mtune=strongarm1100
tune-$(CONFIG_CPU_XSCALE) =$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
tune-$(CONFIG_CPU_XSC3) =$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
tune-$(CONFIG_CPU_FEROCEON) =$(call cc-option,-mtune=marvell-f,-mtune=xscale)
tune-$(CONFIG_CPU_V6) =$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm)
tune-$(CONFIG_CPU_V6K) =$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm)
# Evaluate tune cc-option calls now
tune-y := $(tune-y)
ifeq ($(CONFIG_AEABI),y)
CFLAGS_ABI :=-mabi=aapcs-linux -mno-thumb-interwork
......@@ -295,9 +301,10 @@ zImage Image xipImage bootpImage uImage: vmlinux
zinstall uinstall install: vmlinux
$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@
%.dtb: scripts
%.dtb: | scripts
$(Q)$(MAKE) $(build)=$(boot)/dts MACHINE=$(MACHINE) $(boot)/dts/$@
PHONY += dtbs
dtbs: scripts
$(Q)$(MAKE) $(build)=$(boot)/dts MACHINE=$(MACHINE) dtbs
......
......@@ -53,6 +53,17 @@ static const void *getprop(const void *fdt, const char *node_path,
return fdt_getprop(fdt, offset, property, len);
}
static uint32_t get_cell_size(const void *fdt)
{
int len;
uint32_t cell_size = 1;
const uint32_t *size_len = getprop(fdt, "/", "#size-cells", &len);
if (size_len)
cell_size = fdt32_to_cpu(*size_len);
return cell_size;
}
static void merge_fdt_bootargs(void *fdt, const char *fdt_cmdline)
{
char cmdline[COMMAND_LINE_SIZE];
......@@ -95,9 +106,11 @@ static void merge_fdt_bootargs(void *fdt, const char *fdt_cmdline)
int atags_to_fdt(void *atag_list, void *fdt, int total_space)
{
struct tag *atag = atag_list;
uint32_t mem_reg_property[2 * NR_BANKS];
/* In the case of 64 bits memory size, need to reserve 2 cells for
* address and size for each bank */
uint32_t mem_reg_property[2 * 2 * NR_BANKS];
int memcount = 0;
int ret;
int ret, memsize;
/* make sure we've got an aligned pointer */
if ((u32)atag_list & 0x3)
......@@ -137,8 +150,25 @@ int atags_to_fdt(void *atag_list, void *fdt, int total_space)
continue;
if (!atag->u.mem.size)
continue;
mem_reg_property[memcount++] = cpu_to_fdt32(atag->u.mem.start);
mem_reg_property[memcount++] = cpu_to_fdt32(atag->u.mem.size);
memsize = get_cell_size(fdt);
if (memsize == 2) {
/* if memsize is 2, that means that
* each data needs 2 cells of 32 bits,
* so the data are 64 bits */
uint64_t *mem_reg_prop64 =
(uint64_t *)mem_reg_property;
mem_reg_prop64[memcount++] =
cpu_to_fdt64(atag->u.mem.start);
mem_reg_prop64[memcount++] =
cpu_to_fdt64(atag->u.mem.size);
} else {
mem_reg_property[memcount++] =
cpu_to_fdt32(atag->u.mem.start);
mem_reg_property[memcount++] =
cpu_to_fdt32(atag->u.mem.size);
}
} else if (atag->hdr.tag == ATAG_INITRD2) {
uint32_t initrd_start, initrd_size;
initrd_start = atag->u.initrd.start;
......@@ -150,8 +180,10 @@ int atags_to_fdt(void *atag_list, void *fdt, int total_space)
}
}
if (memcount)
setprop(fdt, "/memory", "reg", mem_reg_property, 4*memcount);
if (memcount) {
setprop(fdt, "/memory", "reg", mem_reg_property,
4 * memcount * memsize);
}
return fdt_pack(fdt);
}
......@@ -142,7 +142,6 @@ start:
mov r7, r1 @ save architecture ID
mov r8, r2 @ save atags pointer
#ifndef __ARM_ARCH_2__
/*
* Booting from Angel - need to enter SVC mode and disable
* FIQs/IRQs (numeric definitions from angel arm.h source).
......@@ -158,10 +157,6 @@ not_angel:
safe_svcmode_maskall r0
msr spsr_cxsf, r9 @ Save the CPU boot mode in
@ SPSR
#else
teqp pc, #0x0c000003 @ turn off interrupts
#endif
/*
* Note that some cache flushing and other stuff may
* be needed here - is there an Angel SWI call for this?
......@@ -183,7 +178,19 @@ not_angel:
ldr r4, =zreladdr
#endif
bl cache_on
/*
* Set up a page table only if it won't overwrite ourself.
* That means r4 < pc && r4 - 16k page directory > &_end.
* Given that r4 > &_end is most unfrequent, we add a rough
* additional 1MB of room for a possible appended DTB.
*/
mov r0, pc
cmp r0, r4
ldrcc r0, LC0+32
addcc r0, r0, pc
cmpcc r4, r0
orrcc r4, r4, #1 @ remember we skipped cache_on
blcs cache_on
restart: adr r0, LC0
ldmia r0, {r1, r2, r3, r6, r10, r11, r12}
......@@ -229,7 +236,7 @@ restart: adr r0, LC0
* r0 = delta
* r2 = BSS start
* r3 = BSS end
* r4 = final kernel address
* r4 = final kernel address (possibly with LSB set)
* r5 = appended dtb size (still unknown)
* r6 = _edata
* r7 = architecture ID
......@@ -277,6 +284,7 @@ restart: adr r0, LC0
*/
cmp r0, #1
sub r0, r4, #TEXT_OFFSET
bic r0, r0, #1
add r0, r0, #0x100
mov r1, r6
sub r2, sp, r6
......@@ -323,12 +331,13 @@ dtb_check_done:
/*
* Check to see if we will overwrite ourselves.
* r4 = final kernel address
* r4 = final kernel address (possibly with LSB set)
* r9 = size of decompressed image
* r10 = end of this image, including bss/stack/malloc space if non XIP
* We basically want:
* r4 - 16k page directory >= r10 -> OK
* r4 + image length <= address of wont_overwrite -> OK
* Note: the possible LSB in r4 is harmless here.
*/
add r10, r10, #16384
cmp r4, r10
......@@ -390,7 +399,8 @@ dtb_check_done:
add sp, sp, r6
#endif
bl cache_clean_flush
tst r4, #1
bleq cache_clean_flush
adr r0, BSYM(restart)
add r0, r0, r6
......@@ -402,7 +412,7 @@ wont_overwrite:
* r0 = delta
* r2 = BSS start
* r3 = BSS end
* r4 = kernel execution address
* r4 = kernel execution address (possibly with LSB set)
* r5 = appended dtb size (0 if not present)
* r7 = architecture ID
* r8 = atags pointer
......@@ -465,6 +475,15 @@ not_relocated: mov r0, #0
cmp r2, r3
blo 1b
/*
* Did we skip the cache setup earlier?
* That is indicated by the LSB in r4.
* Do it now if so.
*/
tst r4, #1
bic r4, r4, #1
blne cache_on
/*
* The C runtime environment should now be setup sufficiently.
* Set up some pointers, and start decompressing.
......@@ -513,6 +532,7 @@ LC0: .word LC0 @ r1
.word _got_start @ r11
.word _got_end @ ip
.word .L_user_stack_end @ sp
.word _end - restart + 16384 + 1024*1024
.size LC0, . - LC0
#ifdef CONFIG_ARCH_RPC
......
......@@ -50,10 +50,10 @@ uart@3e000000 {
};
L2: l2-cache {
compatible = "arm,pl310-cache";
reg = <0x3ff20000 0x1000>;
cache-unified;
cache-level = <2>;
compatible = "bcm,bcm11351-a2-pl310-cache";
reg = <0x3ff20000 0x1000>;
cache-unified;
cache-level = <2>;
};
timer@35006000 {
......
......@@ -32,11 +32,11 @@
1901: adr r0, 1902b
bl printascii
mov r0, r9
bl printhex8
bl printhex2
adr r0, 1903b
bl printascii
mov r0, r10
bl printhex8
bl printhex2
adr r0, 1904b
bl printascii
#endif
......
......@@ -19,10 +19,6 @@
#include <asm/smp.h>
#include <asm/smp_plat.h>
static void __init simple_smp_init_cpus(void)
{
}
static int __cpuinit mcpm_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
unsigned int mpidr, pcpu, pcluster, ret;
......@@ -74,7 +70,6 @@ static void mcpm_cpu_die(unsigned int cpu)
#endif
static struct smp_operations __initdata mcpm_smp_ops = {
.smp_init_cpus = simple_smp_init_cpus,
.smp_boot_secondary = mcpm_boot_secondary,
.smp_secondary_init = mcpm_secondary_init,
#ifdef CONFIG_HOTPLUG_CPU
......
......@@ -80,15 +80,6 @@ static inline u32 arch_timer_get_cntfrq(void)
return val;
}
static inline u64 arch_counter_get_cntpct(void)
{
u64 cval;
isb();
asm volatile("mrrc p15, 0, %Q0, %R0, c14" : "=r" (cval));
return cval;
}
static inline u64 arch_counter_get_cntvct(void)
{
u64 cval;
......
......@@ -23,6 +23,11 @@
#define CR_RR (1 << 14) /* Round Robin cache replacement */
#define CR_L4 (1 << 15) /* LDR pc can set T bit */
#define CR_DT (1 << 16)
#ifdef CONFIG_MMU
#define CR_HA (1 << 17) /* Hardware management of Access Flag */
#else
#define CR_BR (1 << 17) /* MPU Background region enable (PMSA) */
#endif
#define CR_IT (1 << 18)
#define CR_ST (1 << 19)
#define CR_FI (1 << 21) /* Fast interrupt (lower latency mode) */
......
......@@ -8,6 +8,7 @@
#define CPUID_CACHETYPE 1
#define CPUID_TCM 2
#define CPUID_TLBTYPE 3
#define CPUID_MPUIR 4
#define CPUID_MPIDR 5
#ifdef CONFIG_CPU_V7M
......
......@@ -46,7 +46,7 @@
__rem; \
})
#if __GNUC__ < 4
#if __GNUC__ < 4 || !defined(CONFIG_AEABI)
/*
* gcc versions earlier than 4.0 are simply too problematic for the
......
......@@ -230,21 +230,21 @@
# endif
#endif
#ifdef CONFIG_CPU_PJ4B
#ifdef CONFIG_CPU_V7M
# ifdef CPU_NAME
# undef MULTI_CPU
# define MULTI_CPU
# else
# define CPU_NAME cpu_pj4b
# define CPU_NAME cpu_v7m
# endif
#endif
#ifdef CONFIG_CPU_V7M
#ifdef CONFIG_CPU_PJ4B
# ifdef CPU_NAME
# undef MULTI_CPU
# define MULTI_CPU
# else
# define CPU_NAME cpu_v7m
# define CPU_NAME cpu_pj4b
# endif
#endif
......
/*
* arch/arm/include/asm/hugetlb-3level.h
*
* Copyright (C) 2012 ARM Ltd.
*
* Based on arch/x86/include/asm/hugetlb.h.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef _ASM_ARM_HUGETLB_3LEVEL_H
#define _ASM_ARM_HUGETLB_3LEVEL_H
/*
* If our huge pte is non-zero then mark the valid bit.
* This allows pte_present(huge_ptep_get(ptep)) to return true for non-zero
* ptes.
* (The valid bit is automatically cleared by set_pte_at for PROT_NONE ptes).
*/
static inline pte_t huge_ptep_get(pte_t *ptep)
{
pte_t retval = *ptep;
if (pte_val(retval))
pte_val(retval) |= L_PTE_VALID;
return retval;
}
static inline void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
pte_t *ptep, pte_t pte)
{
set_pte_at(mm, addr, ptep, pte);
}
static inline void huge_ptep_clear_flush(struct vm_area_struct *vma,
unsigned long addr, pte_t *ptep)
{
ptep_clear_flush(vma, addr, ptep);
}
static inline void huge_ptep_set_wrprotect(struct mm_struct *mm,
unsigned long addr, pte_t *ptep)
{
ptep_set_wrprotect(mm, addr, ptep);
}
static inline pte_t huge_ptep_get_and_clear(struct mm_struct *mm,
unsigned long addr, pte_t *ptep)
{
return ptep_get_and_clear(mm, addr, ptep);
}
static inline int huge_ptep_set_access_flags(struct vm_area_struct *vma,
unsigned long addr, pte_t *ptep,
pte_t pte, int dirty)
{
return ptep_set_access_flags(vma, addr, ptep, pte, dirty);
}
#endif /* _ASM_ARM_HUGETLB_3LEVEL_H */
/*
* arch/arm/include/asm/hugetlb.h
*
* Copyright (C) 2012 ARM Ltd.
*
* Based on arch/x86/include/asm/hugetlb.h
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef _ASM_ARM_HUGETLB_H
#define _ASM_ARM_HUGETLB_H
#include <asm/page.h>
#include <asm-generic/hugetlb.h>
#include <asm/hugetlb-3level.h>
static inline void hugetlb_free_pgd_range(struct mmu_gather *tlb,
unsigned long addr, unsigned long end,
unsigned long floor,
unsigned long ceiling)
{
free_pgd_range(tlb, addr, end, floor, ceiling);
}
static inline int is_hugepage_only_range(struct mm_struct *mm,
unsigned long addr, unsigned long len)
{
return 0;
}
static inline int prepare_hugepage_range(struct file *file,
unsigned long addr, unsigned long len)
{
struct hstate *h = hstate_file(file);
if (len & ~huge_page_mask(h))
return -EINVAL;
if (addr & ~huge_page_mask(h))
return -EINVAL;
return 0;
}
static inline void hugetlb_prefault_arch_hook(struct mm_struct *mm)
{
}
static inline int huge_pte_none(pte_t pte)
{
return pte_none(pte);
}
static inline pte_t huge_pte_wrprotect(pte_t pte)
{
return pte_wrprotect(pte);
}
static inline int arch_prepare_hugepage(struct page *page)
{
return 0;
}
static inline void arch_release_hugepage(struct page *page)
{
}
static inline void arch_clear_hugepage_flags(struct page *page)
{
clear_bit(PG_dcache_clean, &page->flags);
}
#endif /* _ASM_ARM_HUGETLB_H */
......@@ -130,16 +130,16 @@ static inline u32 __raw_readl(const volatile void __iomem *addr)
*/
extern void __iomem *__arm_ioremap_pfn_caller(unsigned long, unsigned long,
size_t, unsigned int, void *);
extern void __iomem *__arm_ioremap_caller(unsigned long, size_t, unsigned int,
extern void __iomem *__arm_ioremap_caller(phys_addr_t, size_t, unsigned int,
void *);
extern void __iomem *__arm_ioremap_pfn(unsigned long, unsigned long, size_t, unsigned int);
extern void __iomem *__arm_ioremap(unsigned long, size_t, unsigned int);
extern void __iomem *__arm_ioremap_exec(unsigned long, size_t, bool cached);
extern void __iomem *__arm_ioremap(phys_addr_t, size_t, unsigned int);
extern void __iomem *__arm_ioremap_exec(phys_addr_t, size_t, bool cached);
extern void __iounmap(volatile void __iomem *addr);
extern void __arm_iounmap(volatile void __iomem *addr);
extern void __iomem * (*arch_ioremap_caller)(unsigned long, size_t,
extern void __iomem * (*arch_ioremap_caller)(phys_addr_t, size_t,
unsigned int, void *);
extern void (*arch_iounmap)(volatile void __iomem *);
......
......@@ -18,6 +18,8 @@
#include <linux/types.h>
#include <linux/sizes.h>
#include <asm/cache.h>
#ifdef CONFIG_NEED_MACH_MEMORY_H
#include <mach/memory.h>
#endif
......@@ -141,6 +143,20 @@
#define page_to_phys(page) (__pfn_to_phys(page_to_pfn(page)))
#define phys_to_page(phys) (pfn_to_page(__phys_to_pfn(phys)))
/*
* Minimum guaranted alignment in pgd_alloc(). The page table pointers passed
* around in head.S and proc-*.S are shifted by this amount, in order to
* leave spare high bits for systems with physical address extension. This
* does not fully accomodate the 40-bit addressing capability of ARM LPAE, but
* gives us about 38-bits or so.
*/
#ifdef CONFIG_ARM_LPAE
#define ARCH_PGD_SHIFT L1_CACHE_SHIFT
#else
#define ARCH_PGD_SHIFT 0
#endif
#define ARCH_PGD_MASK ((1 << ARCH_PGD_SHIFT) - 1)
#ifndef __ASSEMBLY__
/*
......@@ -207,7 +223,7 @@ static inline unsigned long __phys_to_virt(unsigned long x)
* direct-mapped view. We assume this is the first page
* of RAM in the mem_map as well.
*/
#define PHYS_PFN_OFFSET (PHYS_OFFSET >> PAGE_SHIFT)
#define PHYS_PFN_OFFSET ((unsigned long)(PHYS_OFFSET >> PAGE_SHIFT))
/*
* These are *only* valid on the kernel direct mapped RAM memory.
......
......@@ -18,6 +18,7 @@
#include <asm/cacheflush.h>
#include <asm/cachetype.h>
#include <asm/proc-fns.h>
#include <asm/smp_plat.h>
#include <asm-generic/mm_hooks.h>
void __check_vmalloc_seq(struct mm_struct *mm);
......@@ -27,7 +28,15 @@ void __check_vmalloc_seq(struct mm_struct *mm);
void check_and_switch_context(struct mm_struct *mm, struct task_struct *tsk);
#define init_new_context(tsk,mm) ({ atomic64_set(&mm->context.id, 0); 0; })
DECLARE_PER_CPU(atomic64_t, active_asids);
#ifdef CONFIG_ARM_ERRATA_798181
void a15_erratum_get_cpumask(int this_cpu, struct mm_struct *mm,
cpumask_t *mask);
#else /* !CONFIG_ARM_ERRATA_798181 */
static inline void a15_erratum_get_cpumask(int this_cpu, struct mm_struct *mm,
cpumask_t *mask)
{
}
#endif /* CONFIG_ARM_ERRATA_798181 */
#else /* !CONFIG_CPU_HAS_ASID */
......@@ -98,12 +107,16 @@ switch_mm(struct mm_struct *prev, struct mm_struct *next,
#ifdef CONFIG_MMU
unsigned int cpu = smp_processor_id();
#ifdef CONFIG_SMP
/* check for possible thread migration */
if (!cpumask_empty(mm_cpumask(next)) &&
/*
* __sync_icache_dcache doesn't broadcast the I-cache invalidation,
* so check for possible thread migration and invalidate the I-cache
* if we're new to this CPU.
*/
if (cache_ops_need_broadcast() &&
!cpumask_empty(mm_cpumask(next)) &&
!cpumask_test_cpu(cpu, mm_cpumask(next)))
__flush_icache_all();
#endif
if (!cpumask_test_and_set_cpu(cpu, mm_cpumask(next)) || prev != next) {
check_and_switch_context(next, tsk);
if (cache_is_vivt())
......
#ifndef __ARM_MPU_H
#define __ARM_MPU_H
#ifdef CONFIG_ARM_MPU
/* MPUIR layout */
#define MPUIR_nU 1
#define MPUIR_DREGION 8
#define MPUIR_IREGION 16
#define MPUIR_DREGION_SZMASK (0xFF << MPUIR_DREGION)
#define MPUIR_IREGION_SZMASK (0xFF << MPUIR_IREGION)
/* ID_MMFR0 data relevant to MPU */
#define MMFR0_PMSA (0xF << 4)
#define MMFR0_PMSAv7 (3 << 4)
/* MPU D/I Size Register fields */
#define MPU_RSR_SZ 1
#define MPU_RSR_EN 0
/* The D/I RSR value for an enabled region spanning the whole of memory */
#define MPU_RSR_ALL_MEM 63
/* Individual bits in the DR/IR ACR */
#define MPU_ACR_XN (1 << 12)
#define MPU_ACR_SHARED (1 << 2)
/* C, B and TEX[2:0] bits only have semantic meanings when grouped */
#define MPU_RGN_CACHEABLE 0xB
#define MPU_RGN_SHARED_CACHEABLE (MPU_RGN_CACHEABLE | MPU_ACR_SHARED)
#define MPU_RGN_STRONGLY_ORDERED 0
/* Main region should only be shared for SMP */
#ifdef CONFIG_SMP
#define MPU_RGN_NORMAL (MPU_RGN_CACHEABLE | MPU_ACR_SHARED)
#else
#define MPU_RGN_NORMAL MPU_RGN_CACHEABLE
#endif
/* Access permission bits of ACR (only define those that we use)*/
#define MPU_AP_PL1RW_PL0RW (0x3 << 8)
#define MPU_AP_PL1RW_PL0R0 (0x2 << 8)
#define MPU_AP_PL1RW_PL0NA (0x1 << 8)
/* For minimal static MPU region configurations */
#define MPU_PROBE_REGION 0
#define MPU_BG_REGION 1
#define MPU_RAM_REGION 2
#define MPU_VECTORS_REGION 3
/* Maximum number of regions Linux is interested in */
#define MPU_MAX_REGIONS 16
#define MPU_DATA_SIDE 0
#define MPU_INSTR_SIDE 1
#ifndef __ASSEMBLY__
struct mpu_rgn {
/* Assume same attributes for d/i-side */
u32 drbar;
u32 drsr;
u32 dracr;
};
struct mpu_rgn_info {
u32 mpuir;
struct mpu_rgn rgns[MPU_MAX_REGIONS];
};
extern struct mpu_rgn_info mpu_rgn_info;
#endif /* __ASSEMBLY__ */
#endif /* CONFIG_ARM_MPU */
#endif
......@@ -13,7 +13,7 @@
/* PAGE_SHIFT determines the page size */
#define PAGE_SHIFT 12
#define PAGE_SIZE (_AC(1,UL) << PAGE_SHIFT)
#define PAGE_MASK (~(PAGE_SIZE-1))
#define PAGE_MASK (~((1 << PAGE_SHIFT) - 1))
#ifndef __ASSEMBLY__
......
......@@ -30,6 +30,7 @@
#define PMD_TYPE_FAULT (_AT(pmdval_t, 0) << 0)
#define PMD_TYPE_TABLE (_AT(pmdval_t, 3) << 0)
#define PMD_TYPE_SECT (_AT(pmdval_t, 1) << 0)
#define PMD_TABLE_BIT (_AT(pmdval_t, 1) << 1)
#define PMD_BIT4 (_AT(pmdval_t, 0))
#define PMD_DOMAIN(x) (_AT(pmdval_t, 0))
#define PMD_APTABLE_SHIFT (61)
......@@ -41,6 +42,8 @@
*/
#define PMD_SECT_BUFFERABLE (_AT(pmdval_t, 1) << 2)
#define PMD_SECT_CACHEABLE (_AT(pmdval_t, 1) << 3)
#define PMD_SECT_USER (_AT(pmdval_t, 1) << 6) /* AP[1] */
#define PMD_SECT_RDONLY (_AT(pmdval_t, 1) << 7) /* AP[2] */
#define PMD_SECT_S (_AT(pmdval_t, 3) << 8)
#define PMD_SECT_AF (_AT(pmdval_t, 1) << 10)
#define PMD_SECT_nG (_AT(pmdval_t, 1) << 11)
......@@ -66,6 +69,7 @@
#define PTE_TYPE_MASK (_AT(pteval_t, 3) << 0)
#define PTE_TYPE_FAULT (_AT(pteval_t, 0) << 0)
#define PTE_TYPE_PAGE (_AT(pteval_t, 3) << 0)
#define PTE_TABLE_BIT (_AT(pteval_t, 1) << 1)
#define PTE_BUFFERABLE (_AT(pteval_t, 1) << 2) /* AttrIndx[0] */
#define PTE_CACHEABLE (_AT(pteval_t, 1) << 3) /* AttrIndx[1] */
#define PTE_EXT_SHARED (_AT(pteval_t, 3) << 8) /* SH[1:0], inner shareable */
......@@ -79,4 +83,24 @@
#define PHYS_MASK_SHIFT (40)
#define PHYS_MASK ((1ULL << PHYS_MASK_SHIFT) - 1)
/*
* TTBR0/TTBR1 split (PAGE_OFFSET):
* 0x40000000: T0SZ = 2, T1SZ = 0 (not used)
* 0x80000000: T0SZ = 0, T1SZ = 1
* 0xc0000000: T0SZ = 0, T1SZ = 2
*
* Only use this feature if PHYS_OFFSET <= PAGE_OFFSET, otherwise
* booting secondary CPUs would end up using TTBR1 for the identity
* mapping set up in TTBR0.
*/
#if defined CONFIG_VMSPLIT_2G
#define TTBR1_OFFSET 16 /* skip two L1 entries */
#elif defined CONFIG_VMSPLIT_3G
#define TTBR1_OFFSET (4096 * (1 + 3)) /* only L2, skip pgd + 3*pmd */
#else
#define TTBR1_OFFSET 0
#endif
#define TTBR1_SIZE (((PAGE_OFFSET >> 30) - 1) << 16)
#endif
......@@ -33,7 +33,7 @@
#define PTRS_PER_PMD 512
#define PTRS_PER_PGD 4
#define PTE_HWTABLE_PTRS (PTRS_PER_PTE)
#define PTE_HWTABLE_PTRS (0)
#define PTE_HWTABLE_OFF (0)
#define PTE_HWTABLE_SIZE (PTRS_PER_PTE * sizeof(u64))
......@@ -48,19 +48,27 @@
#define PMD_SHIFT 21
#define PMD_SIZE (1UL << PMD_SHIFT)
#define PMD_MASK (~(PMD_SIZE-1))
#define PMD_MASK (~((1 << PMD_SHIFT) - 1))
#define PGDIR_SIZE (1UL << PGDIR_SHIFT)
#define PGDIR_MASK (~(PGDIR_SIZE-1))
#define PGDIR_MASK (~((1 << PGDIR_SHIFT) - 1))
/*
* section address mask and size definitions.
*/
#define SECTION_SHIFT 21
#define SECTION_SIZE (1UL << SECTION_SHIFT)
#define SECTION_MASK (~(SECTION_SIZE-1))
#define SECTION_MASK (~((1 << SECTION_SHIFT) - 1))
#define USER_PTRS_PER_PGD (PAGE_OFFSET / PGDIR_SIZE)
/*
* Hugetlb definitions.
*/
#define HPAGE_SHIFT PMD_SHIFT
#define HPAGE_SIZE (_AC(1, UL) << HPAGE_SHIFT)
#define HPAGE_MASK (~(HPAGE_SIZE - 1))
#define HUGETLB_PAGE_ORDER (HPAGE_SHIFT - PAGE_SHIFT)
/*
* "Linux" PTE definitions for LPAE.
*
......@@ -79,6 +87,11 @@
#define L_PTE_SPECIAL (_AT(pteval_t, 1) << 56) /* unused */
#define L_PTE_NONE (_AT(pteval_t, 1) << 57) /* PROT_NONE */
#define PMD_SECT_VALID (_AT(pmdval_t, 1) << 0)
#define PMD_SECT_DIRTY (_AT(pmdval_t, 1) << 55)
#define PMD_SECT_SPLITTING (_AT(pmdval_t, 1) << 56)
#define PMD_SECT_NONE (_AT(pmdval_t, 1) << 57)
/*
* To be used in assembly code with the upper page attributes.
*/
......@@ -166,8 +179,83 @@ static inline pmd_t *pmd_offset(pud_t *pud, unsigned long addr)
clean_pmd_entry(pmdp); \
} while (0)
/*
* For 3 levels of paging the PTE_EXT_NG bit will be set for user address ptes
* that are written to a page table but not for ptes created with mk_pte.
*
* In hugetlb_no_page, a new huge pte (new_pte) is generated and passed to
* hugetlb_cow, where it is compared with an entry in a page table.
* This comparison test fails erroneously leading ultimately to a memory leak.
*
* To correct this behaviour, we mask off PTE_EXT_NG for any pte that is
* present before running the comparison.
*/
#define __HAVE_ARCH_PTE_SAME
#define pte_same(pte_a,pte_b) ((pte_present(pte_a) ? pte_val(pte_a) & ~PTE_EXT_NG \
: pte_val(pte_a)) \
== (pte_present(pte_b) ? pte_val(pte_b) & ~PTE_EXT_NG \
: pte_val(pte_b)))
#define set_pte_ext(ptep,pte,ext) cpu_set_pte_ext(ptep,__pte(pte_val(pte)|(ext)))
#define pte_huge(pte) (pte_val(pte) && !(pte_val(pte) & PTE_TABLE_BIT))
#define pte_mkhuge(pte) (__pte(pte_val(pte) & ~PTE_TABLE_BIT))
#define pmd_young(pmd) (pmd_val(pmd) & PMD_SECT_AF)
#define __HAVE_ARCH_PMD_WRITE
#define pmd_write(pmd) (!(pmd_val(pmd) & PMD_SECT_RDONLY))
#ifdef CONFIG_TRANSPARENT_HUGEPAGE
#define pmd_trans_huge(pmd) (pmd_val(pmd) && !(pmd_val(pmd) & PMD_TABLE_BIT))
#define pmd_trans_splitting(pmd) (pmd_val(pmd) & PMD_SECT_SPLITTING)
#endif
#define PMD_BIT_FUNC(fn,op) \
static inline pmd_t pmd_##fn(pmd_t pmd) { pmd_val(pmd) op; return pmd; }
PMD_BIT_FUNC(wrprotect, |= PMD_SECT_RDONLY);
PMD_BIT_FUNC(mkold, &= ~PMD_SECT_AF);
PMD_BIT_FUNC(mksplitting, |= PMD_SECT_SPLITTING);
PMD_BIT_FUNC(mkwrite, &= ~PMD_SECT_RDONLY);
PMD_BIT_FUNC(mkdirty, |= PMD_SECT_DIRTY);
PMD_BIT_FUNC(mkyoung, |= PMD_SECT_AF);
#define pmd_mkhuge(pmd) (__pmd(pmd_val(pmd) & ~PMD_TABLE_BIT))
#define pmd_pfn(pmd) (((pmd_val(pmd) & PMD_MASK) & PHYS_MASK) >> PAGE_SHIFT)
#define pfn_pmd(pfn,prot) (__pmd(((phys_addr_t)(pfn) << PAGE_SHIFT) | pgprot_val(prot)))
#define mk_pmd(page,prot) pfn_pmd(page_to_pfn(page),prot)
/* represent a notpresent pmd by zero, this is used by pmdp_invalidate */
#define pmd_mknotpresent(pmd) (__pmd(0))
static inline pmd_t pmd_modify(pmd_t pmd, pgprot_t newprot)
{
const pmdval_t mask = PMD_SECT_USER | PMD_SECT_XN | PMD_SECT_RDONLY |
PMD_SECT_VALID | PMD_SECT_NONE;
pmd_val(pmd) = (pmd_val(pmd) & ~mask) | (pgprot_val(newprot) & mask);
return pmd;
}
static inline void set_pmd_at(struct mm_struct *mm, unsigned long addr,
pmd_t *pmdp, pmd_t pmd)
{
BUG_ON(addr >= TASK_SIZE);
/* create a faulting entry if PROT_NONE protected */
if (pmd_val(pmd) & PMD_SECT_NONE)
pmd_val(pmd) &= ~PMD_SECT_VALID;
*pmdp = __pmd(pmd_val(pmd) | PMD_SECT_nG);
flush_pmd_entry(pmdp);
}
static inline int has_transparent_hugepage(void)
{
return 1;
}
#endif /* __ASSEMBLY__ */
#endif /* _ASM_PGTABLE_3LEVEL_H */
......@@ -24,6 +24,9 @@
#include <asm/memory.h>
#include <asm/pgtable-hwdef.h>
#include <asm/tlbflush.h>
#ifdef CONFIG_ARM_LPAE
#include <asm/pgtable-3level.h>
#else
......
......@@ -60,7 +60,7 @@ extern struct processor {
/*
* Set the page table
*/
void (*switch_mm)(unsigned long pgd_phys, struct mm_struct *mm);
void (*switch_mm)(phys_addr_t pgd_phys, struct mm_struct *mm);
/*
* Set a possibly extended PTE. Non-extended PTEs should
* ignore 'ext'.
......@@ -82,7 +82,7 @@ extern void cpu_proc_init(void);
extern void cpu_proc_fin(void);
extern int cpu_do_idle(void);
extern void cpu_dcache_clean_area(void *, int);
extern void cpu_do_switch_mm(unsigned long pgd_phys, struct mm_struct *mm);
extern void cpu_do_switch_mm(phys_addr_t pgd_phys, struct mm_struct *mm);
#ifdef CONFIG_ARM_LPAE
extern void cpu_set_pte_ext(pte_t *ptep, pte_t pte);
#else
......@@ -116,13 +116,25 @@ extern void cpu_resume(void);
#define cpu_switch_mm(pgd,mm) cpu_do_switch_mm(virt_to_phys(pgd),mm)
#ifdef CONFIG_ARM_LPAE
#define cpu_get_ttbr(nr) \
({ \
u64 ttbr; \
__asm__("mrrc p15, " #nr ", %Q0, %R0, c2" \
: "=r" (ttbr)); \
ttbr; \
})
#define cpu_set_ttbr(nr, val) \
do { \
u64 ttbr = val; \
__asm__("mcrr p15, " #nr ", %Q0, %R0, c2" \
: : "r" (ttbr)); \
} while (0)
#define cpu_get_pgd() \
({ \
unsigned long pg, pg2; \
__asm__("mrrc p15, 0, %0, %1, c2" \
: "=r" (pg), "=r" (pg2) \
: \
: "cc"); \
u64 pg = cpu_get_ttbr(0); \
pg &= ~(PTRS_PER_PGD*sizeof(pgd_t)-1); \
(pgd_t *)phys_to_virt(pg); \
})
......@@ -137,6 +149,10 @@ extern void cpu_resume(void);
})
#endif
#else /*!CONFIG_MMU */
#define cpu_switch_mm(pgd,mm) { }
#endif
#endif /* __ASSEMBLY__ */
......
......@@ -65,7 +65,10 @@ asmlinkage void secondary_start_kernel(void);
* Initial data for bringing up a secondary CPU.
*/
struct secondary_data {
unsigned long pgdir;
union {
unsigned long mpu_rgn_szr;
unsigned long pgdir;
};
unsigned long swapper_pg_dir;
void *stack;
};
......
......@@ -26,6 +26,9 @@ static inline bool is_smp(void)
}
/* all SMP configurations have the extended CPUID registers */
#ifndef CONFIG_MMU
#define tlb_ops_need_broadcast() 0
#else
static inline int tlb_ops_need_broadcast(void)
{
if (!is_smp())
......@@ -33,6 +36,7 @@ static inline int tlb_ops_need_broadcast(void)
return ((read_cpuid_ext(CPUID_EXT_MMFR3) >> 12) & 0xf) < 2;
}
#endif
#if !defined(CONFIG_SMP) || __LINUX_ARM_ARCH__ >= 7
#define cache_ops_need_broadcast() 0
......@@ -66,4 +70,22 @@ static inline int get_logical_index(u32 mpidr)
return -EINVAL;
}
/*
* NOTE ! Assembly code relies on the following
* structure memory layout in order to carry out load
* multiple from its base address. For more
* information check arch/arm/kernel/sleep.S
*/
struct mpidr_hash {
u32 mask; /* used by sleep.S */
u32 shift_aff[3]; /* used by sleep.S */
u32 bits;
};
extern struct mpidr_hash mpidr_hash;
static inline u32 mpidr_hash_size(void)
{
return 1 << mpidr_hash.bits;
}
#endif
......@@ -97,19 +97,22 @@ static inline void arch_spin_lock(arch_spinlock_t *lock)
static inline int arch_spin_trylock(arch_spinlock_t *lock)
{
unsigned long tmp;
unsigned long contended, res;
u32 slock;
__asm__ __volatile__(
" ldrex %0, [%2]\n"
" subs %1, %0, %0, ror #16\n"
" addeq %0, %0, %3\n"
" strexeq %1, %0, [%2]"
: "=&r" (slock), "=&r" (tmp)
: "r" (&lock->slock), "I" (1 << TICKET_SHIFT)
: "cc");
if (tmp == 0) {
do {
__asm__ __volatile__(
" ldrex %0, [%3]\n"
" mov %2, #0\n"
" subs %1, %0, %0, ror #16\n"
" addeq %0, %0, %4\n"
" strexeq %2, %0, [%3]"
: "=&r" (slock), "=&r" (contended), "=r" (res)
: "r" (&lock->slock), "I" (1 << TICKET_SHIFT)
: "cc");
} while (res);
if (!contended) {
smp_mb();
return 1;
} else {
......
#ifndef __ASM_ARM_SUSPEND_H
#define __ASM_ARM_SUSPEND_H
struct sleep_save_sp {
u32 *save_ptr_stash;
u32 save_ptr_stash_phys;
};
extern void cpu_resume(void);
extern int cpu_suspend(unsigned long, int (*)(unsigned long));
......
......@@ -58,7 +58,7 @@ struct thread_info {
struct cpu_context_save cpu_context; /* cpu context */
__u32 syscall; /* syscall number */
__u8 used_cp[16]; /* thread used copro */
unsigned long tp_value;
unsigned long tp_value[2]; /* TLS registers */
#ifdef CONFIG_CRUNCH
struct crunch_state crunchstate;
#endif
......
......@@ -204,6 +204,12 @@ static inline void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmdp,
#endif
}
static inline void
tlb_remove_pmd_tlb_entry(struct mmu_gather *tlb, pmd_t *pmdp, unsigned long addr)
{
tlb_add_flush(tlb, addr);
}
#define pte_free_tlb(tlb, ptep, addr) __pte_free_tlb(tlb, ptep, addr)
#define pmd_free_tlb(tlb, pmdp, addr) __pmd_free_tlb(tlb, pmdp, addr)
#define pud_free_tlb(tlb, pudp, addr) pud_free((tlb)->mm, pudp)
......
......@@ -535,8 +535,33 @@ static inline void update_mmu_cache(struct vm_area_struct *vma,
}
#endif
#define update_mmu_cache_pmd(vma, address, pmd) do { } while (0)
#endif
#endif /* CONFIG_MMU */
#elif defined(CONFIG_SMP) /* !CONFIG_MMU */
#ifndef __ASSEMBLY__
#include <linux/mm_types.h>
static inline void local_flush_tlb_all(void) { }
static inline void local_flush_tlb_mm(struct mm_struct *mm) { }
static inline void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr) { }
static inline void local_flush_tlb_kernel_page(unsigned long kaddr) { }
static inline void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start, unsigned long end) { }
static inline void local_flush_tlb_kernel_range(unsigned long start, unsigned long end) { }
static inline void local_flush_bp_all(void) { }
extern void flush_tlb_all(void);
extern void flush_tlb_mm(struct mm_struct *mm);
extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr);
extern void flush_tlb_kernel_page(unsigned long kaddr);
extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, unsigned long end);
extern void flush_tlb_kernel_range(unsigned long start, unsigned long end);
extern void flush_bp_all(void);
#endif /* __ASSEMBLY__ */
#endif
#endif
......@@ -2,27 +2,30 @@
#define __ASMARM_TLS_H
#ifdef __ASSEMBLY__
.macro set_tls_none, tp, tmp1, tmp2
#include <asm/asm-offsets.h>
.macro switch_tls_none, base, tp, tpuser, tmp1, tmp2
.endm
.macro set_tls_v6k, tp, tmp1, tmp2
.macro switch_tls_v6k, base, tp, tpuser, tmp1, tmp2
mrc p15, 0, \tmp2, c13, c0, 2 @ get the user r/w register
mcr p15, 0, \tp, c13, c0, 3 @ set TLS register
mov \tmp1, #0
mcr p15, 0, \tmp1, c13, c0, 2 @ clear user r/w TLS register
mcr p15, 0, \tpuser, c13, c0, 2 @ and the user r/w register
str \tmp2, [\base, #TI_TP_VALUE + 4] @ save it
.endm
.macro set_tls_v6, tp, tmp1, tmp2
.macro switch_tls_v6, base, tp, tpuser, tmp1, tmp2
ldr \tmp1, =elf_hwcap
ldr \tmp1, [\tmp1, #0]
mov \tmp2, #0xffff0fff
tst \tmp1, #HWCAP_TLS @ hardware TLS available?
mcrne p15, 0, \tp, c13, c0, 3 @ yes, set TLS register
movne \tmp1, #0
mcrne p15, 0, \tmp1, c13, c0, 2 @ clear user r/w TLS register
streq \tp, [\tmp2, #-15] @ set TLS value at 0xffff0ff0
mrcne p15, 0, \tmp2, c13, c0, 2 @ get the user r/w register
mcrne p15, 0, \tp, c13, c0, 3 @ yes, set TLS register
mcrne p15, 0, \tpuser, c13, c0, 2 @ set user r/w register
strne \tmp2, [\base, #TI_TP_VALUE + 4] @ save it
.endm
.macro set_tls_software, tp, tmp1, tmp2
.macro switch_tls_software, base, tp, tpuser, tmp1, tmp2
mov \tmp1, #0xffff0fff
str \tp, [\tmp1, #-15] @ set TLS value at 0xffff0ff0
.endm
......@@ -31,19 +34,30 @@
#ifdef CONFIG_TLS_REG_EMUL
#define tls_emu 1
#define has_tls_reg 1
#define set_tls set_tls_none
#define switch_tls switch_tls_none
#elif defined(CONFIG_CPU_V6)
#define tls_emu 0
#define has_tls_reg (elf_hwcap & HWCAP_TLS)
#define set_tls set_tls_v6
#define switch_tls switch_tls_v6
#elif defined(CONFIG_CPU_32v6K)
#define tls_emu 0
#define has_tls_reg 1
#define set_tls set_tls_v6k
#define switch_tls switch_tls_v6k
#else
#define tls_emu 0
#define has_tls_reg 0
#define set_tls set_tls_software
#define switch_tls switch_tls_software
#endif
#ifndef __ASSEMBLY__
static inline unsigned long get_tpuser(void)
{
unsigned long reg = 0;
if (has_tls_reg && !tls_emu)
__asm__("mrc p15, 0, %0, c13, c0, 2" : "=r" (reg));
return reg;
}
#endif
#endif /* __ASMARM_TLS_H */
......@@ -16,6 +16,8 @@
#define DEBUG_LL_PHYS_BASE_RS1 0x1c000000
#define DEBUG_LL_UART_OFFSET_RS1 0x00090000
#define DEBUG_LL_UART_PHYS_CRX 0xb0090000
#define DEBUG_LL_VIRT_BASE 0xf8000000
#if defined(CONFIG_DEBUG_VEXPRESS_UART0_DETECT)
......@@ -67,6 +69,14 @@
#include <asm/hardware/debug-pl01x.S>
#elif defined(CONFIG_DEBUG_VEXPRESS_UART0_CRX)
.macro addruart,rp,tmp,tmp2
ldr \rp, =DEBUG_LL_UART_PHYS_CRX
.endm
#include <asm/hardware/debug-pl01x.S>
#else /* CONFIG_DEBUG_LL_UART_NONE */
.macro addruart, rp, rv, tmp
......
......@@ -25,6 +25,6 @@
#define HWCAP_IDIVT (1 << 18)
#define HWCAP_VFPD32 (1 << 19) /* set if VFP has 32 regs (not 16) */
#define HWCAP_IDIV (HWCAP_IDIVA | HWCAP_IDIVT)
#define HWCAP_LPAE (1 << 20)
#endif /* _UAPI__ASMARM_HWCAP_H */
......@@ -38,7 +38,10 @@ obj-$(CONFIG_ARTHUR) += arthur.o
obj-$(CONFIG_ISA_DMA) += dma-isa.o
obj-$(CONFIG_PCI) += bios32.o isa.o
obj-$(CONFIG_ARM_CPU_SUSPEND) += sleep.o suspend.o
obj-$(CONFIG_SMP) += smp.o smp_tlb.o
obj-$(CONFIG_SMP) += smp.o
ifdef CONFIG_MMU
obj-$(CONFIG_SMP) += smp_tlb.o
endif
obj-$(CONFIG_HAVE_ARM_SCU) += smp_scu.o
obj-$(CONFIG_HAVE_ARM_TWD) += smp_twd.o
obj-$(CONFIG_ARM_ARCH_TIMER) += arch_timer.o
......
......@@ -23,6 +23,7 @@
#include <asm/thread_info.h>
#include <asm/memory.h>
#include <asm/procinfo.h>
#include <asm/suspend.h>
#include <asm/hardware/cache-l2x0.h>
#include <linux/kbuild.h>
......@@ -144,6 +145,11 @@ int main(void)
#endif
#ifdef MULTI_CACHE
DEFINE(CACHE_FLUSH_KERN_ALL, offsetof(struct cpu_cache_fns, flush_kern_all));
#endif
#ifdef CONFIG_ARM_CPU_SUSPEND
DEFINE(SLEEP_SAVE_SP_SZ, sizeof(struct sleep_save_sp));
DEFINE(SLEEP_SAVE_SP_PHYS, offsetof(struct sleep_save_sp, save_ptr_stash_phys));
DEFINE(SLEEP_SAVE_SP_VIRT, offsetof(struct sleep_save_sp, save_ptr_stash));
#endif
BLANK();
DEFINE(DMA_BIDIRECTIONAL, DMA_BIDIRECTIONAL);
......
......@@ -685,15 +685,16 @@ ENTRY(__switch_to)
UNWIND(.fnstart )
UNWIND(.cantunwind )
add ip, r1, #TI_CPU_SAVE
ldr r3, [r2, #TI_TP_VALUE]
ARM( stmia ip!, {r4 - sl, fp, sp, lr} ) @ Store most regs on stack
THUMB( stmia ip!, {r4 - sl, fp} ) @ Store most regs on stack
THUMB( str sp, [ip], #4 )
THUMB( str lr, [ip], #4 )
ldr r4, [r2, #TI_TP_VALUE]
ldr r5, [r2, #TI_TP_VALUE + 4]
#ifdef CONFIG_CPU_USE_DOMAINS
ldr r6, [r2, #TI_CPU_DOMAIN]
#endif
set_tls r3, r4, r5
switch_tls r1, r4, r5, r3, r7
#if defined(CONFIG_CC_STACKPROTECTOR) && !defined(CONFIG_SMP)
ldr r7, [r2, #TI_TASK]
ldr r8, =__stack_chk_guard
......
......@@ -366,6 +366,16 @@ ENTRY(vector_swi)
#endif
zero_fp
#ifdef CONFIG_ALIGNMENT_TRAP
ldr ip, __cr_alignment
ldr ip, [ip]
mcr p15, 0, ip, c1, c0 @ update control register
#endif
enable_irq
ct_user_exit
get_thread_info tsk
/*
* Get the system call number.
*/
......@@ -379,9 +389,9 @@ ENTRY(vector_swi)
#ifdef CONFIG_ARM_THUMB
tst r8, #PSR_T_BIT
movne r10, #0 @ no thumb OABI emulation
ldreq r10, [lr, #-4] @ get SWI instruction
USER( ldreq r10, [lr, #-4] ) @ get SWI instruction
#else
ldr r10, [lr, #-4] @ get SWI instruction
USER( ldr r10, [lr, #-4] ) @ get SWI instruction
#endif
#ifdef CONFIG_CPU_ENDIAN_BE8
rev r10, r10 @ little endian instruction
......@@ -396,22 +406,13 @@ ENTRY(vector_swi)
/* Legacy ABI only, possibly thumb mode. */
tst r8, #PSR_T_BIT @ this is SPSR from save_user_regs
addne scno, r7, #__NR_SYSCALL_BASE @ put OS number in
ldreq scno, [lr, #-4]
USER( ldreq scno, [lr, #-4] )
#else
/* Legacy ABI only. */
ldr scno, [lr, #-4] @ get SWI instruction
USER( ldr scno, [lr, #-4] ) @ get SWI instruction
#endif
#ifdef CONFIG_ALIGNMENT_TRAP
ldr ip, __cr_alignment
ldr ip, [ip]
mcr p15, 0, ip, c1, c0 @ update control register
#endif
enable_irq
ct_user_exit
get_thread_info tsk
adr tbl, sys_call_table @ load syscall table pointer
#if defined(CONFIG_OABI_COMPAT)
......@@ -446,6 +447,21 @@ local_restart:
eor r0, scno, #__NR_SYSCALL_BASE @ put OS number back
bcs arm_syscall
b sys_ni_syscall @ not private func
#if defined(CONFIG_OABI_COMPAT) || !defined(CONFIG_AEABI)
/*
* We failed to handle a fault trying to access the page
* containing the swi instruction, but we're not really in a
* position to return -EFAULT. Instead, return back to the
* instruction and re-enter the user fault handling path trying
* to page it in. This will likely result in sending SEGV to the
* current task.
*/
9001:
sub lr, lr, #4
str lr, [sp, #S_PC]
b ret_fast_syscall
#endif
ENDPROC(vector_swi)
/*
......
......@@ -17,9 +17,12 @@
#include <asm/assembler.h>
#include <asm/ptrace.h>
#include <asm/asm-offsets.h>
#include <asm/memory.h>
#include <asm/cp15.h>
#include <asm/thread_info.h>
#include <asm/v7m.h>
#include <asm/mpu.h>
#include <asm/page.h>
/*
* Kernel startup entry point.
......@@ -63,12 +66,74 @@ ENTRY(stext)
movs r10, r5 @ invalid processor (r5=0)?
beq __error_p @ yes, error 'p'
adr lr, BSYM(__after_proc_init) @ return (PIC) address
#ifdef CONFIG_ARM_MPU
/* Calculate the size of a region covering just the kernel */
ldr r5, =PHYS_OFFSET @ Region start: PHYS_OFFSET
ldr r6, =(_end) @ Cover whole kernel
sub r6, r6, r5 @ Minimum size of region to map
clz r6, r6 @ Region size must be 2^N...
rsb r6, r6, #31 @ ...so round up region size
lsl r6, r6, #MPU_RSR_SZ @ Put size in right field
orr r6, r6, #(1 << MPU_RSR_EN) @ Set region enabled bit
bl __setup_mpu
#endif
ldr r13, =__mmap_switched @ address to jump to after
@ initialising sctlr
adr lr, BSYM(1f) @ return (PIC) address
ARM( add pc, r10, #PROCINFO_INITFUNC )
THUMB( add r12, r10, #PROCINFO_INITFUNC )
THUMB( mov pc, r12 )
1: b __after_proc_init
ENDPROC(stext)
#ifdef CONFIG_SMP
__CPUINIT
ENTRY(secondary_startup)
/*
* Common entry point for secondary CPUs.
*
* Ensure that we're in SVC mode, and IRQs are disabled. Lookup
* the processor type - there is no need to check the machine type
* as it has already been validated by the primary processor.
*/
setmode PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9
#ifndef CONFIG_CPU_CP15
ldr r9, =CONFIG_PROCESSOR_ID
#else
mrc p15, 0, r9, c0, c0 @ get processor id
#endif
bl __lookup_processor_type @ r5=procinfo r9=cpuid
movs r10, r5 @ invalid processor?
beq __error_p @ yes, error 'p'
adr r4, __secondary_data
ldmia r4, {r7, r12}
#ifdef CONFIG_ARM_MPU
/* Use MPU region info supplied by __cpu_up */
ldr r6, [r7] @ get secondary_data.mpu_szr
bl __setup_mpu @ Initialize the MPU
#endif
adr lr, BSYM(__after_proc_init) @ return address
mov r13, r12 @ __secondary_switched address
ARM( add pc, r10, #PROCINFO_INITFUNC )
THUMB( add r12, r10, #PROCINFO_INITFUNC )
THUMB( mov pc, r12 )
ENDPROC(secondary_startup)
ENTRY(__secondary_switched)
ldr sp, [r7, #8] @ set up the stack pointer
mov fp, #0
b secondary_start_kernel
ENDPROC(__secondary_switched)
.type __secondary_data, %object
__secondary_data:
.long secondary_data
.long __secondary_switched
#endif /* CONFIG_SMP */
/*
* Set the Control Register and Read the process ID.
*/
......@@ -99,10 +164,97 @@ __after_proc_init:
#endif
mcr p15, 0, r0, c1, c0, 0 @ write control reg
#endif /* CONFIG_CPU_CP15 */
b __mmap_switched @ clear the BSS and jump
@ to start_kernel
mov pc, r13
ENDPROC(__after_proc_init)
.ltorg
#ifdef CONFIG_ARM_MPU
/* Set which MPU region should be programmed */
.macro set_region_nr tmp, rgnr
mov \tmp, \rgnr @ Use static region numbers
mcr p15, 0, \tmp, c6, c2, 0 @ Write RGNR
.endm
/* Setup a single MPU region, either D or I side (D-side for unified) */
.macro setup_region bar, acr, sr, side = MPU_DATA_SIDE
mcr p15, 0, \bar, c6, c1, (0 + \side) @ I/DRBAR
mcr p15, 0, \acr, c6, c1, (4 + \side) @ I/DRACR
mcr p15, 0, \sr, c6, c1, (2 + \side) @ I/DRSR
.endm
/*
* Setup the MPU and initial MPU Regions. We create the following regions:
* Region 0: Use this for probing the MPU details, so leave disabled.
* Region 1: Background region - covers the whole of RAM as strongly ordered
* Region 2: Normal, Shared, cacheable for RAM. From PHYS_OFFSET, size from r6
* Region 3: Normal, shared, inaccessible from PL0 to protect the vectors page
*
* r6: Value to be written to DRSR (and IRSR if required) for MPU_RAM_REGION
*/
ENTRY(__setup_mpu)
/* Probe for v7 PMSA compliance */
mrc p15, 0, r0, c0, c1, 4 @ Read ID_MMFR0
and r0, r0, #(MMFR0_PMSA) @ PMSA field
teq r0, #(MMFR0_PMSAv7) @ PMSA v7
bne __error_p @ Fail: ARM_MPU on NOT v7 PMSA
/* Determine whether the D/I-side memory map is unified. We set the
* flags here and continue to use them for the rest of this function */
mrc p15, 0, r0, c0, c0, 4 @ MPUIR
ands r5, r0, #MPUIR_DREGION_SZMASK @ 0 size d region => No MPU
beq __error_p @ Fail: ARM_MPU and no MPU
tst r0, #MPUIR_nU @ MPUIR_nU = 0 for unified
/* Setup second region first to free up r6 */
set_region_nr r0, #MPU_RAM_REGION
isb
/* Full access from PL0, PL1, shared for CONFIG_SMP, cacheable */
ldr r0, =PHYS_OFFSET @ RAM starts at PHYS_OFFSET
ldr r5,=(MPU_AP_PL1RW_PL0RW | MPU_RGN_NORMAL)
setup_region r0, r5, r6, MPU_DATA_SIDE @ PHYS_OFFSET, shared, enabled
beq 1f @ Memory-map not unified
setup_region r0, r5, r6, MPU_INSTR_SIDE @ PHYS_OFFSET, shared, enabled
1: isb
/* First/background region */
set_region_nr r0, #MPU_BG_REGION
isb
/* Execute Never, strongly ordered, inaccessible to PL0, rw PL1 */
mov r0, #0 @ BG region starts at 0x0
ldr r5,=(MPU_ACR_XN | MPU_RGN_STRONGLY_ORDERED | MPU_AP_PL1RW_PL0NA)
mov r6, #MPU_RSR_ALL_MEM @ 4GB region, enabled
setup_region r0, r5, r6, MPU_DATA_SIDE @ 0x0, BG region, enabled
beq 2f @ Memory-map not unified
setup_region r0, r5, r6, MPU_INSTR_SIDE @ 0x0, BG region, enabled
2: isb
/* Vectors region */
set_region_nr r0, #MPU_VECTORS_REGION
isb
/* Shared, inaccessible to PL0, rw PL1 */
mov r0, #CONFIG_VECTORS_BASE @ Cover from VECTORS_BASE
ldr r5,=(MPU_AP_PL1RW_PL0NA | MPU_RGN_NORMAL)
/* Writing N to bits 5:1 (RSR_SZ) --> region size 2^N+1 */
mov r6, #(((PAGE_SHIFT - 1) << MPU_RSR_SZ) | 1 << MPU_RSR_EN)
setup_region r0, r5, r6, MPU_DATA_SIDE @ VECTORS_BASE, PL0 NA, enabled
beq 3f @ Memory-map not unified
setup_region r0, r5, r6, MPU_INSTR_SIDE @ VECTORS_BASE, PL0 NA, enabled
3: isb
/* Enable the MPU */
mrc p15, 0, r0, c1, c0, 0 @ Read SCTLR
bic r0, r0, #CR_BR @ Disable the 'default mem-map'
orr r0, r0, #CR_M @ Set SCTRL.M (MPU on)
mcr p15, 0, r0, c1, c0, 0 @ Enable MPU
isb
mov pc,lr
ENDPROC(__setup_mpu)
#endif
#include "head-common.S"
......@@ -156,7 +156,7 @@ ENDPROC(stext)
*
* Returns:
* r0, r3, r5-r7 corrupted
* r4 = physical page table address
* r4 = page table (see ARCH_PGD_SHIFT in asm/memory.h)
*/
__create_page_tables:
pgtbl r4, r8 @ page table address
......@@ -331,6 +331,7 @@ __create_page_tables:
#endif
#ifdef CONFIG_ARM_LPAE
sub r4, r4, #0x1000 @ point to the PGD table
mov r4, r4, lsr #ARCH_PGD_SHIFT
#endif
mov pc, lr
ENDPROC(__create_page_tables)
......@@ -408,7 +409,7 @@ __secondary_data:
* r0 = cp#15 control register
* r1 = machine ID
* r2 = atags or dtb pointer
* r4 = page table pointer
* r4 = page table (see ARCH_PGD_SHIFT in asm/memory.h)
* r9 = processor ID
* r13 = *virtual* address to jump to upon completion
*/
......@@ -427,10 +428,7 @@ __enable_mmu:
#ifdef CONFIG_CPU_ICACHE_DISABLE
bic r0, r0, #CR_I
#endif
#ifdef CONFIG_ARM_LPAE
mov r5, #0
mcrr p15, 0, r4, r5, c2 @ load TTBR0
#else
#ifndef CONFIG_ARM_LPAE
mov r5, #(domain_val(DOMAIN_USER, DOMAIN_MANAGER) | \
domain_val(DOMAIN_KERNEL, DOMAIN_MANAGER) | \
domain_val(DOMAIN_TABLE, DOMAIN_MANAGER) | \
......
......@@ -153,6 +153,13 @@ THUMB( orr r7, #(1 << 30) ) @ HSCTLR.TE
mrc p15, 4, r7, c14, c1, 0 @ CNTHCTL
orr r7, r7, #3 @ PL1PCEN | PL1PCTEN
mcr p15, 4, r7, c14, c1, 0 @ CNTHCTL
mov r7, #0
mcrr p15, 4, r7, r7, c14 @ CNTVOFF
@ Disable virtual timer in case it was counting
mrc p15, 0, r7, c14, c3, 1 @ CNTV_CTL
bic r7, #1 @ Clear ENABLE
mcr p15, 0, r7, c14, c3, 1 @ CNTV_CTL
1:
#endif
......
......@@ -569,6 +569,7 @@ perf_callchain_user(struct perf_callchain_entry *entry, struct pt_regs *regs)
return;
}
perf_callchain_store(entry, regs->ARM_pc);
tail = (struct frame_tail __user *)regs->ARM_fp - 1;
while ((entry->nr < PERF_MAX_STACK_DEPTH) &&
......
......@@ -39,6 +39,7 @@
#include <asm/thread_notify.h>
#include <asm/stacktrace.h>
#include <asm/mach/time.h>
#include <asm/tls.h>
#ifdef CONFIG_CC_STACKPROTECTOR
#include <linux/stackprotector.h>
......@@ -374,7 +375,8 @@ copy_thread(unsigned long clone_flags, unsigned long stack_start,
clear_ptrace_hw_breakpoint(p);
if (clone_flags & CLONE_SETTLS)
thread->tp_value = childregs->ARM_r3;
thread->tp_value[0] = childregs->ARM_r3;
thread->tp_value[1] = get_tpuser();
thread_notify(THREAD_NOTIFY_COPY, thread);
......
......@@ -68,8 +68,6 @@ void __ref psci_cpu_die(unsigned int cpu)
/* We should never return */
panic("psci: cpu %d failed to shutdown\n", cpu);
}
#else
#define psci_cpu_die NULL
#endif
bool __init psci_smp_available(void)
......@@ -80,5 +78,7 @@ bool __init psci_smp_available(void)
struct smp_operations __initdata psci_smp_ops = {
.smp_boot_secondary = psci_boot_secondary,
#ifdef CONFIG_HOTPLUG_CPU
.cpu_die = psci_cpu_die,
#endif
};
......@@ -849,7 +849,7 @@ long arch_ptrace(struct task_struct *child, long request,
#endif
case PTRACE_GET_THREAD_AREA:
ret = put_user(task_thread_info(child)->tp_value,
ret = put_user(task_thread_info(child)->tp_value[0],
datap);
break;
......
......@@ -367,7 +367,7 @@ void __init early_print(const char *str, ...)
static void __init cpuid_init_hwcaps(void)
{
unsigned int divide_instrs;
unsigned int divide_instrs, vmsa;
if (cpu_architecture() < CPU_ARCH_ARMv7)
return;
......@@ -380,6 +380,11 @@ static void __init cpuid_init_hwcaps(void)
case 1:
elf_hwcap |= HWCAP_IDIVT;
}
/* LPAE implies atomic ldrd/strd instructions */
vmsa = (read_cpuid_ext(CPUID_EXT_MMFR0) & 0xf) >> 0;
if (vmsa >= 5)
elf_hwcap |= HWCAP_LPAE;
}
static void __init feat_v6_fixup(void)
......@@ -470,9 +475,82 @@ void __init smp_setup_processor_id(void)
for (i = 1; i < nr_cpu_ids; ++i)
cpu_logical_map(i) = i == cpu ? 0 : i;
/*
* clear __my_cpu_offset on boot CPU to avoid hang caused by
* using percpu variable early, for example, lockdep will
* access percpu variable inside lock_release
*/
set_my_cpu_offset(0);
printk(KERN_INFO "Booting Linux on physical CPU 0x%x\n", mpidr);
}
struct mpidr_hash mpidr_hash;
#ifdef CONFIG_SMP
/**
* smp_build_mpidr_hash - Pre-compute shifts required at each affinity
* level in order to build a linear index from an
* MPIDR value. Resulting algorithm is a collision
* free hash carried out through shifting and ORing
*/
static void __init smp_build_mpidr_hash(void)
{
u32 i, affinity;
u32 fs[3], bits[3], ls, mask = 0;
/*
* Pre-scan the list of MPIDRS and filter out bits that do
* not contribute to affinity levels, ie they never toggle.
*/
for_each_possible_cpu(i)
mask |= (cpu_logical_map(i) ^ cpu_logical_map(0));
pr_debug("mask of set bits 0x%x\n", mask);
/*
* Find and stash the last and first bit set at all affinity levels to
* check how many bits are required to represent them.
*/
for (i = 0; i < 3; i++) {
affinity = MPIDR_AFFINITY_LEVEL(mask, i);
/*
* Find the MSB bit and LSB bits position
* to determine how many bits are required
* to express the affinity level.
*/
ls = fls(affinity);
fs[i] = affinity ? ffs(affinity) - 1 : 0;
bits[i] = ls - fs[i];
}
/*
* An index can be created from the MPIDR by isolating the
* significant bits at each affinity level and by shifting
* them in order to compress the 24 bits values space to a
* compressed set of values. This is equivalent to hashing
* the MPIDR through shifting and ORing. It is a collision free
* hash though not minimal since some levels might contain a number
* of CPUs that is not an exact power of 2 and their bit
* representation might contain holes, eg MPIDR[7:0] = {0x2, 0x80}.
*/
mpidr_hash.shift_aff[0] = fs[0];
mpidr_hash.shift_aff[1] = MPIDR_LEVEL_BITS + fs[1] - bits[0];
mpidr_hash.shift_aff[2] = 2*MPIDR_LEVEL_BITS + fs[2] -
(bits[1] + bits[0]);
mpidr_hash.mask = mask;
mpidr_hash.bits = bits[2] + bits[1] + bits[0];
pr_debug("MPIDR hash: aff0[%u] aff1[%u] aff2[%u] mask[0x%x] bits[%u]\n",
mpidr_hash.shift_aff[0],
mpidr_hash.shift_aff[1],
mpidr_hash.shift_aff[2],
mpidr_hash.mask,
mpidr_hash.bits);
/*
* 4x is an arbitrary value used to warn on a hash table much bigger
* than expected on most systems.
*/
if (mpidr_hash_size() > 4 * num_possible_cpus())
pr_warn("Large number of MPIDR hash buckets detected\n");
sync_cache_w(&mpidr_hash);
}
#endif
static void __init setup_processor(void)
{
struct proc_info_list *list;
......@@ -820,6 +898,7 @@ void __init setup_arch(char **cmdline_p)
smp_set_ops(mdesc->smp);
}
smp_init_cpus();
smp_build_mpidr_hash();
}
#endif
......@@ -892,6 +971,7 @@ static const char *hwcap_str[] = {
"vfpv4",
"idiva",
"idivt",
"lpae",
NULL
};
......
......@@ -392,14 +392,19 @@ setup_return(struct pt_regs *regs, struct ksignal *ksig,
if (ksig->ka.sa.sa_flags & SA_SIGINFO)
idx += 3;
/*
* Put the sigreturn code on the stack no matter which return
* mechanism we use in order to remain ABI compliant
*/
if (__put_user(sigreturn_codes[idx], rc) ||
__put_user(sigreturn_codes[idx+1], rc+1))
return 1;
if (cpsr & MODE32_BIT) {
if ((cpsr & MODE32_BIT) && !IS_ENABLED(CONFIG_ARM_MPU)) {
/*
* 32-bit code can use the new high-page
* signal return code support.
* signal return code support except when the MPU has
* protected the vectors page from PL0
*/
retcode = KERN_SIGRETURN_CODE + (idx << 2) + thumb;
} else {
......
......@@ -6,6 +6,49 @@
#include <asm/glue-proc.h>
.text
/*
* Implementation of MPIDR hash algorithm through shifting
* and OR'ing.
*
* @dst: register containing hash result
* @rs0: register containing affinity level 0 bit shift
* @rs1: register containing affinity level 1 bit shift
* @rs2: register containing affinity level 2 bit shift
* @mpidr: register containing MPIDR value
* @mask: register containing MPIDR mask
*
* Pseudo C-code:
*
*u32 dst;
*
*compute_mpidr_hash(u32 rs0, u32 rs1, u32 rs2, u32 mpidr, u32 mask) {
* u32 aff0, aff1, aff2;
* u32 mpidr_masked = mpidr & mask;
* aff0 = mpidr_masked & 0xff;
* aff1 = mpidr_masked & 0xff00;
* aff2 = mpidr_masked & 0xff0000;
* dst = (aff0 >> rs0 | aff1 >> rs1 | aff2 >> rs2);
*}
* Input registers: rs0, rs1, rs2, mpidr, mask
* Output register: dst
* Note: input and output registers must be disjoint register sets
(eg: a macro instance with mpidr = r1 and dst = r1 is invalid)
*/
.macro compute_mpidr_hash dst, rs0, rs1, rs2, mpidr, mask
and \mpidr, \mpidr, \mask @ mask out MPIDR bits
and \dst, \mpidr, #0xff @ mask=aff0
ARM( mov \dst, \dst, lsr \rs0 ) @ dst=aff0>>rs0
THUMB( lsr \dst, \dst, \rs0 )
and \mask, \mpidr, #0xff00 @ mask = aff1
ARM( orr \dst, \dst, \mask, lsr \rs1 ) @ dst|=(aff1>>rs1)
THUMB( lsr \mask, \mask, \rs1 )
THUMB( orr \dst, \dst, \mask )
and \mask, \mpidr, #0xff0000 @ mask = aff2
ARM( orr \dst, \dst, \mask, lsr \rs2 ) @ dst|=(aff2>>rs2)
THUMB( lsr \mask, \mask, \rs2 )
THUMB( orr \dst, \dst, \mask )
.endm
/*
* Save CPU state for a suspend. This saves the CPU general purpose
* registers, and allocates space on the kernel stack to save the CPU
......@@ -29,12 +72,18 @@ ENTRY(__cpu_suspend)
mov r1, r4 @ size of save block
mov r2, r5 @ virtual SP
ldr r3, =sleep_save_sp
#ifdef CONFIG_SMP
ALT_SMP(mrc p15, 0, lr, c0, c0, 5)
ALT_UP(mov lr, #0)
and lr, lr, #15
ldr r3, [r3, #SLEEP_SAVE_SP_VIRT]
ALT_SMP(mrc p15, 0, r9, c0, c0, 5)
ALT_UP_B(1f)
ldr r8, =mpidr_hash
/*
* This ldmia relies on the memory layout of the mpidr_hash
* struct mpidr_hash.
*/
ldmia r8, {r4-r7} @ r4 = mpidr mask (r5,r6,r7) = l[0,1,2] shifts
compute_mpidr_hash lr, r5, r6, r7, r9, r4
add r3, r3, lr, lsl #2
#endif
1:
bl __cpu_suspend_save
adr lr, BSYM(cpu_suspend_abort)
ldmfd sp!, {r0, pc} @ call suspend fn
......@@ -81,15 +130,23 @@ ENDPROC(cpu_resume_after_mmu)
.data
.align
ENTRY(cpu_resume)
#ifdef CONFIG_SMP
adr r0, sleep_save_sp
ALT_SMP(mrc p15, 0, r1, c0, c0, 5)
ALT_UP(mov r1, #0)
and r1, r1, #15
ldr r0, [r0, r1, lsl #2] @ stack phys addr
#else
ldr r0, sleep_save_sp @ stack phys addr
#endif
mov r1, #0
ALT_SMP(mrc p15, 0, r0, c0, c0, 5)
ALT_UP_B(1f)
adr r2, mpidr_hash_ptr
ldr r3, [r2]
add r2, r2, r3 @ r2 = struct mpidr_hash phys address
/*
* This ldmia relies on the memory layout of the mpidr_hash
* struct mpidr_hash.
*/
ldmia r2, { r3-r6 } @ r3 = mpidr mask (r4,r5,r6) = l[0,1,2] shifts
compute_mpidr_hash r1, r4, r5, r6, r0, r3
1:
adr r0, _sleep_save_sp
ldr r0, [r0, #SLEEP_SAVE_SP_PHYS]
ldr r0, [r0, r1, lsl #2]
setmode PSR_I_BIT | PSR_F_BIT | SVC_MODE, r1 @ set SVC, irqs off
@ load phys pgd, stack, resume fn
ARM( ldmia r0!, {r1, sp, pc} )
......@@ -98,7 +155,11 @@ THUMB( mov sp, r2 )
THUMB( bx r3 )
ENDPROC(cpu_resume)
sleep_save_sp:
.rept CONFIG_NR_CPUS
.long 0 @ preserve stack phys ptr here
.endr
.align 2
mpidr_hash_ptr:
.long mpidr_hash - . @ mpidr_hash struct offset
.type sleep_save_sp, #object
ENTRY(sleep_save_sp)
_sleep_save_sp:
.space SLEEP_SAVE_SP_SZ @ struct sleep_save_sp
......@@ -45,6 +45,7 @@
#include <asm/smp_plat.h>
#include <asm/virt.h>
#include <asm/mach/arch.h>
#include <asm/mpu.h>
/*
* as from 2.5, kernels no longer have an init_tasks structure
......@@ -78,6 +79,13 @@ void __init smp_set_ops(struct smp_operations *ops)
smp_ops = *ops;
};
static unsigned long get_arch_pgd(pgd_t *pgd)
{
phys_addr_t pgdir = virt_to_phys(pgd);
BUG_ON(pgdir & ARCH_PGD_MASK);
return pgdir >> ARCH_PGD_SHIFT;
}
int __cpuinit __cpu_up(unsigned int cpu, struct task_struct *idle)
{
int ret;
......@@ -87,8 +95,14 @@ int __cpuinit __cpu_up(unsigned int cpu, struct task_struct *idle)
* its stack and the page tables.
*/
secondary_data.stack = task_stack_page(idle) + THREAD_START_SP;
secondary_data.pgdir = virt_to_phys(idmap_pgd);
secondary_data.swapper_pg_dir = virt_to_phys(swapper_pg_dir);
#ifdef CONFIG_ARM_MPU
secondary_data.mpu_rgn_szr = mpu_rgn_info.rgns[MPU_RAM_REGION].drsr;
#endif
#ifdef CONFIG_MMU
secondary_data.pgdir = get_arch_pgd(idmap_pgd);
secondary_data.swapper_pg_dir = get_arch_pgd(swapper_pg_dir);
#endif
__cpuc_flush_dcache_area(&secondary_data, sizeof(secondary_data));
outer_clean_range(__pa(&secondary_data), __pa(&secondary_data + 1));
......@@ -112,9 +126,8 @@ int __cpuinit __cpu_up(unsigned int cpu, struct task_struct *idle)
pr_err("CPU%u: failed to boot: %d\n", cpu, ret);
}
secondary_data.stack = NULL;
secondary_data.pgdir = 0;
memset(&secondary_data, 0, sizeof(secondary_data));
return ret;
}
......
......@@ -103,7 +103,7 @@ static void broadcast_tlb_a15_erratum(void)
static void broadcast_tlb_mm_a15_erratum(struct mm_struct *mm)
{
int cpu, this_cpu;
int this_cpu;
cpumask_t mask = { CPU_BITS_NONE };
if (!erratum_a15_798181())
......@@ -111,21 +111,7 @@ static void broadcast_tlb_mm_a15_erratum(struct mm_struct *mm)
dummy_flush_tlb_a15_erratum();
this_cpu = get_cpu();
for_each_online_cpu(cpu) {
if (cpu == this_cpu)
continue;
/*
* We only need to send an IPI if the other CPUs are running
* the same ASID as the one being invalidated. There is no
* need for locking around the active_asids check since the
* switch_mm() function has at least one dmb() (as required by
* this workaround) in case a context switch happens on
* another CPU after the condition below.
*/
if (atomic64_read(&mm->context.id) ==
atomic64_read(&per_cpu(active_asids, cpu)))
cpumask_set_cpu(cpu, &mask);
}
a15_erratum_get_cpumask(this_cpu, mm, &mask);
smp_call_function_many(&mask, ipi_flush_tlb_a15_erratum, NULL, 1);
put_cpu();
}
......
#include <linux/init.h>
#include <linux/slab.h>
#include <asm/cacheflush.h>
#include <asm/idmap.h>
#include <asm/pgalloc.h>
#include <asm/pgtable.h>
#include <asm/memory.h>
#include <asm/smp_plat.h>
#include <asm/suspend.h>
#include <asm/tlbflush.h>
extern int __cpu_suspend(unsigned long, int (*)(unsigned long));
extern void cpu_resume_mmu(void);
#ifdef CONFIG_MMU
/*
* Hide the first two arguments to __cpu_suspend - these are an implementation
* detail which platform code shouldn't have to know about.
*/
int cpu_suspend(unsigned long arg, int (*fn)(unsigned long))
{
struct mm_struct *mm = current->active_mm;
int ret;
if (!idmap_pgd)
return -EINVAL;
/*
* Provide a temporary page table with an identity mapping for
* the MMU-enable code, required for resuming. On successful
* resume (indicated by a zero return code), we need to switch
* back to the correct page tables.
*/
ret = __cpu_suspend(arg, fn);
if (ret == 0) {
cpu_switch_mm(mm->pgd, mm);
local_flush_bp_all();
local_flush_tlb_all();
}
return ret;
}
#else
int cpu_suspend(unsigned long arg, int (*fn)(unsigned long))
{
return __cpu_suspend(arg, fn);
}
#define idmap_pgd NULL
#endif
/*
* This is called by __cpu_suspend() to save the state, and do whatever
* flushing is required to ensure that when the CPU goes to sleep we have
......@@ -47,30 +86,19 @@ void __cpu_suspend_save(u32 *ptr, u32 ptrsz, u32 sp, u32 *save_ptr)
virt_to_phys(save_ptr) + sizeof(*save_ptr));
}
/*
* Hide the first two arguments to __cpu_suspend - these are an implementation
* detail which platform code shouldn't have to know about.
*/
int cpu_suspend(unsigned long arg, int (*fn)(unsigned long))
{
struct mm_struct *mm = current->active_mm;
int ret;
if (!idmap_pgd)
return -EINVAL;
extern struct sleep_save_sp sleep_save_sp;
/*
* Provide a temporary page table with an identity mapping for
* the MMU-enable code, required for resuming. On successful
* resume (indicated by a zero return code), we need to switch
* back to the correct page tables.
*/
ret = __cpu_suspend(arg, fn);
if (ret == 0) {
cpu_switch_mm(mm->pgd, mm);
local_flush_bp_all();
local_flush_tlb_all();
}
static int cpu_suspend_alloc_sp(void)
{
void *ctx_ptr;
/* ctx_ptr is an array of physical addresses */
ctx_ptr = kcalloc(mpidr_hash_size(), sizeof(u32), GFP_KERNEL);
return ret;
if (WARN_ON(!ctx_ptr))
return -ENOMEM;
sleep_save_sp.save_ptr_stash = ctx_ptr;
sleep_save_sp.save_ptr_stash_phys = virt_to_phys(ctx_ptr);
sync_cache_w(&sleep_save_sp);
return 0;
}
early_initcall(cpu_suspend_alloc_sp);
......@@ -581,7 +581,7 @@ asmlinkage int arm_syscall(int no, struct pt_regs *regs)
return regs->ARM_r0;
case NR(set_tls):
thread->tp_value = regs->ARM_r0;
thread->tp_value[0] = regs->ARM_r0;
if (tls_emu)
return 0;
if (has_tls_reg) {
......@@ -699,7 +699,7 @@ static int get_tp_trap(struct pt_regs *regs, unsigned int instr)
int reg = (instr >> 12) & 15;
if (reg == 15)
return 1;
regs->uregs[reg] = current_thread_info()->tp_value;
regs->uregs[reg] = current_thread_info()->tp_value[0];
regs->ARM_pc += 4;
return 0;
}
......
......@@ -497,6 +497,10 @@ vcpu .req r0 @ vcpu pointer always in r0
add r5, vcpu, r4
strd r2, r3, [r5]
@ Ensure host CNTVCT == CNTPCT
mov r2, #0
mcrr p15, 4, r2, r2, c14 @ CNTVOFF
1:
#endif
@ Allow physical timer/counter access for the host
......
......@@ -116,7 +116,7 @@ static void __init ebsa110_map_io(void)
iotable_init(ebsa110_io_desc, ARRAY_SIZE(ebsa110_io_desc));
}
static void __iomem *ebsa110_ioremap_caller(unsigned long cookie, size_t size,
static void __iomem *ebsa110_ioremap_caller(phys_addr_t cookie, size_t size,
unsigned int flags, void *caller)
{
return (void __iomem *)cookie;
......
......@@ -93,7 +93,7 @@ config SOC_EXYNOS5440
default y
depends on ARCH_EXYNOS5
select ARCH_HAS_OPP
select ARM_ARCH_TIMER
select HAVE_ARM_ARCH_TIMER
select AUTO_ZRELADDR
select MIGHT_HAVE_PCI
select PCI_DOMAINS if PCI
......
......@@ -65,7 +65,7 @@ static void imx3_idle(void)
: "=r" (reg));
}
static void __iomem *imx3_ioremap_caller(unsigned long phys_addr, size_t size,
static void __iomem *imx3_ioremap_caller(phys_addr_t phys_addr, size_t size,
unsigned int mtype, void *caller)
{
if (mtype == MT_DEVICE) {
......
......@@ -23,7 +23,7 @@
#include "pci.h"
static void __iomem *__iop13xx_ioremap_caller(unsigned long cookie,
static void __iomem *__iop13xx_ioremap_caller(phys_addr_t cookie,
size_t size, unsigned int mtype, void *caller)
{
void __iomem * retval;
......
......@@ -559,7 +559,7 @@ void ixp4xx_restart(char mode, const char *cmd)
* fallback to the default.
*/
static void __iomem *ixp4xx_ioremap_caller(unsigned long addr, size_t size,
static void __iomem *ixp4xx_ioremap_caller(phys_addr_t addr, size_t size,
unsigned int mtype, void *caller)
{
if (!is_pci_memory(addr))
......
......@@ -23,7 +23,7 @@ extern void msm_map_msm8x60_io(void);
extern void msm_map_msm8960_io(void);
extern void msm_map_qsd8x50_io(void);
extern void __iomem *__msm_ioremap_caller(unsigned long phys_addr, size_t size,
extern void __iomem *__msm_ioremap_caller(phys_addr_t phys_addr, size_t size,
unsigned int mtype, void *caller);
extern struct smp_operations msm_smp_ops;
......
......@@ -168,7 +168,7 @@ void __init msm_map_msm7x30_io(void)
}
#endif /* CONFIG_ARCH_MSM7X30 */
void __iomem *__msm_ioremap_caller(unsigned long phys_addr, size_t size,
void __iomem *__msm_ioremap_caller(phys_addr_t phys_addr, size_t size,
unsigned int mtype, void *caller)
{
if (mtype == MT_DEVICE) {
......
......@@ -4,6 +4,7 @@ config ARCH_OMAP
config ARCH_OMAP2PLUS
bool "TI OMAP2/3/4/5 SoCs with device tree support" if (ARCH_MULTI_V6 || ARCH_MULTI_V7)
select ARCH_HAS_CPUFREQ
select ARCH_HAS_BANDGAP
select ARCH_HAS_HOLES_MEMORYMODEL
select ARCH_OMAP
select ARCH_REQUIRE_GPIOLIB
......
......@@ -23,7 +23,7 @@ config ARCH_R8A73A4
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_GIC
select CPU_V7
select ARM_ARCH_TIMER
select HAVE_ARM_ARCH_TIMER
select SH_CLK_CPG
select RENESAS_IRQC
......@@ -59,7 +59,7 @@ config ARCH_R8A7790
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_GIC
select CPU_V7
select ARM_ARCH_TIMER
select HAVE_ARM_ARCH_TIMER
select SH_CLK_CPG
select RENESAS_IRQC
......
......@@ -60,7 +60,7 @@ config ARCH_TEGRA_3x_SOC
config ARCH_TEGRA_114_SOC
bool "Enable support for Tegra114 family"
select ARM_ARCH_TIMER
select HAVE_ARM_ARCH_TIMER
select ARM_GIC
select ARM_L1_CACHE_SHIFT_6
select CPU_FREQ_TABLE if CPU_FREQ
......
......@@ -2,7 +2,7 @@ config ARCH_VIRT
bool "Dummy Virtual Machine" if ARCH_MULTI_V7
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_GIC
select ARM_ARCH_TIMER
select HAVE_ARM_ARCH_TIMER
select ARM_PSCI
select HAVE_SMP
select CPU_V7
......
......@@ -392,7 +392,8 @@ config CPU_V7
select CPU_CACHE_V7
select CPU_CACHE_VIPT
select CPU_COPY_V6 if MMU
select CPU_CP15_MMU
select CPU_CP15_MMU if MMU
select CPU_CP15_MPU if !MMU
select CPU_HAS_ASID if MMU
select CPU_PABRT_V7
select CPU_TLB_V7 if MMU
......
......@@ -16,6 +16,7 @@ obj-$(CONFIG_MODULES) += proc-syms.o
obj-$(CONFIG_ALIGNMENT_TRAP) += alignment.o
obj-$(CONFIG_HIGHMEM) += highmem.o
obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
obj-$(CONFIG_CPU_ABRT_NOMMU) += abort-nommu.o
obj-$(CONFIG_CPU_ABRT_EV4) += abort-ev4.o
......
......@@ -523,6 +523,147 @@ static void aurora_flush_range(unsigned long start, unsigned long end)
}
}
/*
* For certain Broadcom SoCs, depending on the address range, different offsets
* need to be added to the address before passing it to L2 for
* invalidation/clean/flush
*
* Section Address Range Offset EMI
* 1 0x00000000 - 0x3FFFFFFF 0x80000000 VC
* 2 0x40000000 - 0xBFFFFFFF 0x40000000 SYS
* 3 0xC0000000 - 0xFFFFFFFF 0x80000000 VC
*
* When the start and end addresses have crossed two different sections, we
* need to break the L2 operation into two, each within its own section.
* For example, if we need to invalidate addresses starts at 0xBFFF0000 and
* ends at 0xC0001000, we need do invalidate 1) 0xBFFF0000 - 0xBFFFFFFF and 2)
* 0xC0000000 - 0xC0001000
*
* Note 1:
* By breaking a single L2 operation into two, we may potentially suffer some
* performance hit, but keep in mind the cross section case is very rare
*
* Note 2:
* We do not need to handle the case when the start address is in
* Section 1 and the end address is in Section 3, since it is not a valid use
* case
*
* Note 3:
* Section 1 in practical terms can no longer be used on rev A2. Because of
* that the code does not need to handle section 1 at all.
*
*/
#define BCM_SYS_EMI_START_ADDR 0x40000000UL
#define BCM_VC_EMI_SEC3_START_ADDR 0xC0000000UL
#define BCM_SYS_EMI_OFFSET 0x40000000UL
#define BCM_VC_EMI_OFFSET 0x80000000UL
static inline int bcm_addr_is_sys_emi(unsigned long addr)
{
return (addr >= BCM_SYS_EMI_START_ADDR) &&
(addr < BCM_VC_EMI_SEC3_START_ADDR);
}
static inline unsigned long bcm_l2_phys_addr(unsigned long addr)
{
if (bcm_addr_is_sys_emi(addr))
return addr + BCM_SYS_EMI_OFFSET;
else
return addr + BCM_VC_EMI_OFFSET;
}
static void bcm_inv_range(unsigned long start, unsigned long end)
{
unsigned long new_start, new_end;
BUG_ON(start < BCM_SYS_EMI_START_ADDR);
if (unlikely(end <= start))
return;
new_start = bcm_l2_phys_addr(start);
new_end = bcm_l2_phys_addr(end);
/* normal case, no cross section between start and end */
if (likely(bcm_addr_is_sys_emi(end) || !bcm_addr_is_sys_emi(start))) {
l2x0_inv_range(new_start, new_end);
return;
}
/* They cross sections, so it can only be a cross from section
* 2 to section 3
*/
l2x0_inv_range(new_start,
bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR-1));
l2x0_inv_range(bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR),
new_end);
}
static void bcm_clean_range(unsigned long start, unsigned long end)
{
unsigned long new_start, new_end;
BUG_ON(start < BCM_SYS_EMI_START_ADDR);
if (unlikely(end <= start))
return;
if ((end - start) >= l2x0_size) {
l2x0_clean_all();
return;
}
new_start = bcm_l2_phys_addr(start);
new_end = bcm_l2_phys_addr(end);
/* normal case, no cross section between start and end */
if (likely(bcm_addr_is_sys_emi(end) || !bcm_addr_is_sys_emi(start))) {
l2x0_clean_range(new_start, new_end);
return;
}
/* They cross sections, so it can only be a cross from section
* 2 to section 3
*/
l2x0_clean_range(new_start,
bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR-1));
l2x0_clean_range(bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR),
new_end);
}
static void bcm_flush_range(unsigned long start, unsigned long end)
{
unsigned long new_start, new_end;
BUG_ON(start < BCM_SYS_EMI_START_ADDR);
if (unlikely(end <= start))
return;
if ((end - start) >= l2x0_size) {
l2x0_flush_all();
return;
}
new_start = bcm_l2_phys_addr(start);
new_end = bcm_l2_phys_addr(end);
/* normal case, no cross section between start and end */
if (likely(bcm_addr_is_sys_emi(end) || !bcm_addr_is_sys_emi(start))) {
l2x0_flush_range(new_start, new_end);
return;
}
/* They cross sections, so it can only be a cross from section
* 2 to section 3
*/
l2x0_flush_range(new_start,
bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR-1));
l2x0_flush_range(bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR),
new_end);
}
static void __init l2x0_of_setup(const struct device_node *np,
u32 *aux_val, u32 *aux_mask)
{
......@@ -765,6 +906,21 @@ static const struct l2x0_of_data aurora_no_outer_data = {
},
};
static const struct l2x0_of_data bcm_l2x0_data = {
.setup = pl310_of_setup,
.save = pl310_save,
.outer_cache = {
.resume = pl310_resume,
.inv_range = bcm_inv_range,
.clean_range = bcm_clean_range,
.flush_range = bcm_flush_range,
.sync = l2x0_cache_sync,
.flush_all = l2x0_flush_all,
.inv_all = l2x0_inv_all,
.disable = l2x0_disable,
},
};
static const struct of_device_id l2x0_ids[] __initconst = {
{ .compatible = "arm,pl310-cache", .data = (void *)&pl310_data },
{ .compatible = "arm,l220-cache", .data = (void *)&l2x0_data },
......@@ -773,6 +929,8 @@ static const struct of_device_id l2x0_ids[] __initconst = {
.data = (void *)&aurora_no_outer_data},
{ .compatible = "marvell,aurora-outer-cache",
.data = (void *)&aurora_with_outer_data},
{ .compatible = "bcm,bcm11351-a2-pl310-cache",
.data = (void *)&bcm_l2x0_data},
{}
};
......
......@@ -20,6 +20,7 @@
#include <asm/smp_plat.h>
#include <asm/thread_notify.h>
#include <asm/tlbflush.h>
#include <asm/proc-fns.h>
/*
* On ARMv6, we have the following structure in the Context ID:
......@@ -39,33 +40,51 @@
* non 64-bit operations.
*/
#define ASID_FIRST_VERSION (1ULL << ASID_BITS)
#define NUM_USER_ASIDS (ASID_FIRST_VERSION - 1)
#define ASID_TO_IDX(asid) ((asid & ~ASID_MASK) - 1)
#define IDX_TO_ASID(idx) ((idx + 1) & ~ASID_MASK)
#define NUM_USER_ASIDS ASID_FIRST_VERSION
static DEFINE_RAW_SPINLOCK(cpu_asid_lock);
static atomic64_t asid_generation = ATOMIC64_INIT(ASID_FIRST_VERSION);
static DECLARE_BITMAP(asid_map, NUM_USER_ASIDS);
DEFINE_PER_CPU(atomic64_t, active_asids);
static DEFINE_PER_CPU(atomic64_t, active_asids);
static DEFINE_PER_CPU(u64, reserved_asids);
static cpumask_t tlb_flush_pending;
#ifdef CONFIG_ARM_ERRATA_798181
void a15_erratum_get_cpumask(int this_cpu, struct mm_struct *mm,
cpumask_t *mask)
{
int cpu;
unsigned long flags;
u64 context_id, asid;
raw_spin_lock_irqsave(&cpu_asid_lock, flags);
context_id = mm->context.id.counter;
for_each_online_cpu(cpu) {
if (cpu == this_cpu)
continue;
/*
* We only need to send an IPI if the other CPUs are
* running the same ASID as the one being invalidated.
*/
asid = per_cpu(active_asids, cpu).counter;
if (asid == 0)
asid = per_cpu(reserved_asids, cpu);
if (context_id == asid)
cpumask_set_cpu(cpu, mask);
}
raw_spin_unlock_irqrestore(&cpu_asid_lock, flags);
}
#endif
#ifdef CONFIG_ARM_LPAE
static void cpu_set_reserved_ttbr0(void)
{
unsigned long ttbl = __pa(swapper_pg_dir);
unsigned long ttbh = 0;
/*
* Set TTBR0 to swapper_pg_dir which contains only global entries. The
* ASID is set to 0.
*/
asm volatile(
" mcrr p15, 0, %0, %1, c2 @ set TTBR0\n"
:
: "r" (ttbl), "r" (ttbh));
cpu_set_ttbr(0, __pa(swapper_pg_dir));
isb();
}
#else
......@@ -128,7 +147,16 @@ static void flush_context(unsigned int cpu)
asid = 0;
} else {
asid = atomic64_xchg(&per_cpu(active_asids, i), 0);
__set_bit(ASID_TO_IDX(asid), asid_map);
/*
* If this CPU has already been through a
* rollover, but hasn't run another task in
* the meantime, we must preserve its reserved
* ASID, as this is the only trace we have of
* the process it is still running.
*/
if (asid == 0)
asid = per_cpu(reserved_asids, i);
__set_bit(asid & ~ASID_MASK, asid_map);
}
per_cpu(reserved_asids, i) = asid;
}
......@@ -167,17 +195,19 @@ static u64 new_context(struct mm_struct *mm, unsigned int cpu)
/*
* Allocate a free ASID. If we can't find one, take a
* note of the currently active ASIDs and mark the TLBs
* as requiring flushes.
* as requiring flushes. We always count from ASID #1,
* as we reserve ASID #0 to switch via TTBR0 and indicate
* rollover events.
*/
asid = find_first_zero_bit(asid_map, NUM_USER_ASIDS);
asid = find_next_zero_bit(asid_map, NUM_USER_ASIDS, 1);
if (asid == NUM_USER_ASIDS) {
generation = atomic64_add_return(ASID_FIRST_VERSION,
&asid_generation);
flush_context(cpu);
asid = find_first_zero_bit(asid_map, NUM_USER_ASIDS);
asid = find_next_zero_bit(asid_map, NUM_USER_ASIDS, 1);
}
__set_bit(asid, asid_map);
asid = generation | IDX_TO_ASID(asid);
asid |= generation;
cpumask_clear(mm_cpumask(mm));
}
......
......@@ -250,7 +250,7 @@ static void __dma_free_buffer(struct page *page, size_t size)
#ifdef CONFIG_MMU
#ifdef CONFIG_HUGETLB_PAGE
#error ARM Coherent DMA allocator does not (yet) support huge TLB
#warning ARM Coherent DMA allocator does not (yet) support huge TLB
#endif
static void *__alloc_from_contiguous(struct device *dev, size_t size,
......@@ -880,10 +880,24 @@ static void __dma_page_dev_to_cpu(struct page *page, unsigned long off,
dma_cache_maint_page(page, off, size, dir, dmac_unmap_area);
/*
* Mark the D-cache clean for this page to avoid extra flushing.
* Mark the D-cache clean for these pages to avoid extra flushing.
*/
if (dir != DMA_TO_DEVICE && off == 0 && size >= PAGE_SIZE)
set_bit(PG_dcache_clean, &page->flags);
if (dir != DMA_TO_DEVICE && size >= PAGE_SIZE) {
unsigned long pfn;
size_t left = size;
pfn = page_to_pfn(page) + off / PAGE_SIZE;
off %= PAGE_SIZE;
if (off) {
pfn++;
left -= PAGE_SIZE - off;
}
while (left >= PAGE_SIZE) {
page = pfn_to_page(pfn++);
set_bit(PG_dcache_clean, &page->flags);
left -= PAGE_SIZE;
}
}
}
/**
......
......@@ -491,12 +491,14 @@ do_translation_fault(unsigned long addr, unsigned int fsr,
* Some section permission faults need to be handled gracefully.
* They can happen due to a __{get,put}_user during an oops.
*/
#ifndef CONFIG_ARM_LPAE
static int
do_sect_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
{
do_bad_area(addr, fsr, regs);
return 0;
}
#endif /* CONFIG_ARM_LPAE */
/*
* This abort handler always returns "fault".
......
......@@ -17,6 +17,7 @@
#include <asm/highmem.h>
#include <asm/smp_plat.h>
#include <asm/tlbflush.h>
#include <linux/hugetlb.h>
#include "mm.h"
......@@ -168,19 +169,23 @@ void __flush_dcache_page(struct address_space *mapping, struct page *page)
* coherent with the kernels mapping.
*/
if (!PageHighMem(page)) {
__cpuc_flush_dcache_area(page_address(page), PAGE_SIZE);
size_t page_size = PAGE_SIZE << compound_order(page);
__cpuc_flush_dcache_area(page_address(page), page_size);
} else {
void *addr;
unsigned long i;
if (cache_is_vipt_nonaliasing()) {
addr = kmap_atomic(page);
__cpuc_flush_dcache_area(addr, PAGE_SIZE);
kunmap_atomic(addr);
} else {
addr = kmap_high_get(page);
if (addr) {
for (i = 0; i < (1 << compound_order(page)); i++) {
void *addr = kmap_atomic(page);
__cpuc_flush_dcache_area(addr, PAGE_SIZE);
kunmap_high(page);
kunmap_atomic(addr);
}
} else {
for (i = 0; i < (1 << compound_order(page)); i++) {
void *addr = kmap_high_get(page);
if (addr) {
__cpuc_flush_dcache_area(addr, PAGE_SIZE);
kunmap_high(page);
}
}
}
}
......@@ -287,7 +292,7 @@ void flush_dcache_page(struct page *page)
mapping = page_mapping(page);
if (!cache_ops_need_broadcast() &&
mapping && !mapping_mapped(mapping))
mapping && !page_mapped(page))
clear_bit(PG_dcache_clean, &page->flags);
else {
__flush_dcache_page(mapping, page);
......
......@@ -9,11 +9,11 @@ static struct fsr_info fsr_info[] = {
{ do_page_fault, SIGSEGV, SEGV_MAPERR, "level 3 translation fault" },
{ do_bad, SIGBUS, 0, "reserved access flag fault" },
{ do_bad, SIGSEGV, SEGV_ACCERR, "level 1 access flag fault" },
{ do_bad, SIGSEGV, SEGV_ACCERR, "level 2 access flag fault" },
{ do_page_fault, SIGSEGV, SEGV_ACCERR, "level 2 access flag fault" },
{ do_page_fault, SIGSEGV, SEGV_ACCERR, "level 3 access flag fault" },
{ do_bad, SIGBUS, 0, "reserved permission fault" },
{ do_bad, SIGSEGV, SEGV_ACCERR, "level 1 permission fault" },
{ do_sect_fault, SIGSEGV, SEGV_ACCERR, "level 2 permission fault" },
{ do_page_fault, SIGSEGV, SEGV_ACCERR, "level 2 permission fault" },
{ do_page_fault, SIGSEGV, SEGV_ACCERR, "level 3 permission fault" },
{ do_bad, SIGBUS, 0, "synchronous external abort" },
{ do_bad, SIGBUS, 0, "asynchronous external abort" },
......
/*
* arch/arm/mm/hugetlbpage.c
*
* Copyright (C) 2012 ARM Ltd.
*
* Based on arch/x86/include/asm/hugetlb.h and Bill Carson's patches
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/init.h>
#include <linux/fs.h>
#include <linux/mm.h>
#include <linux/hugetlb.h>
#include <linux/pagemap.h>
#include <linux/err.h>
#include <linux/sysctl.h>
#include <asm/mman.h>
#include <asm/tlb.h>
#include <asm/tlbflush.h>
#include <asm/pgalloc.h>
/*
* On ARM, huge pages are backed by pmd's rather than pte's, so we do a lot
* of type casting from pmd_t * to pte_t *.
*/
pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr)
{
pgd_t *pgd;
pud_t *pud;
pmd_t *pmd = NULL;
pgd = pgd_offset(mm, addr);
if (pgd_present(*pgd)) {
pud = pud_offset(pgd, addr);
if (pud_present(*pud))
pmd = pmd_offset(pud, addr);
}
return (pte_t *)pmd;
}
struct page *follow_huge_addr(struct mm_struct *mm, unsigned long address,
int write)
{
return ERR_PTR(-EINVAL);
}
int pud_huge(pud_t pud)
{
return 0;
}
int huge_pmd_unshare(struct mm_struct *mm, unsigned long *addr, pte_t *ptep)
{
return 0;
}
pte_t *huge_pte_alloc(struct mm_struct *mm,
unsigned long addr, unsigned long sz)
{
pgd_t *pgd;
pud_t *pud;
pte_t *pte = NULL;
pgd = pgd_offset(mm, addr);
pud = pud_alloc(mm, pgd, addr);
if (pud)
pte = (pte_t *)pmd_alloc(mm, pud, addr);
return pte;
}
struct page *
follow_huge_pmd(struct mm_struct *mm, unsigned long address,
pmd_t *pmd, int write)
{
struct page *page;
page = pte_page(*(pte_t *)pmd);
if (page)
page += ((address & ~PMD_MASK) >> PAGE_SHIFT);
return page;
}
int pmd_huge(pmd_t pmd)
{
return pmd_val(pmd) && !(pmd_val(pmd) & PMD_TABLE_BIT);
}
......@@ -36,12 +36,13 @@
#include "mm.h"
static unsigned long phys_initrd_start __initdata = 0;
static phys_addr_t phys_initrd_start __initdata = 0;
static unsigned long phys_initrd_size __initdata = 0;
static int __init early_initrd(char *p)
{
unsigned long start, size;
phys_addr_t start;
unsigned long size;
char *endp;
start = memparse(p, &endp);
......@@ -350,14 +351,14 @@ void __init arm_memblock_init(struct meminfo *mi, struct machine_desc *mdesc)
#ifdef CONFIG_BLK_DEV_INITRD
if (phys_initrd_size &&
!memblock_is_region_memory(phys_initrd_start, phys_initrd_size)) {
pr_err("INITRD: 0x%08lx+0x%08lx is not a memory region - disabling initrd\n",
phys_initrd_start, phys_initrd_size);
pr_err("INITRD: 0x%08llx+0x%08lx is not a memory region - disabling initrd\n",
(u64)phys_initrd_start, phys_initrd_size);
phys_initrd_start = phys_initrd_size = 0;
}
if (phys_initrd_size &&
memblock_is_region_reserved(phys_initrd_start, phys_initrd_size)) {
pr_err("INITRD: 0x%08lx+0x%08lx overlaps in-use memory region - disabling initrd\n",
phys_initrd_start, phys_initrd_size);
pr_err("INITRD: 0x%08llx+0x%08lx overlaps in-use memory region - disabling initrd\n",
(u64)phys_initrd_start, phys_initrd_size);
phys_initrd_start = phys_initrd_size = 0;
}
if (phys_initrd_size) {
......@@ -442,7 +443,7 @@ static inline void
free_memmap(unsigned long start_pfn, unsigned long end_pfn)
{
struct page *start_pg, *end_pg;
unsigned long pg, pgend;
phys_addr_t pg, pgend;
/*
* Convert start_pfn/end_pfn to a struct page pointer.
......@@ -454,8 +455,8 @@ free_memmap(unsigned long start_pfn, unsigned long end_pfn)
* Convert to physical addresses, and
* round start upwards and end downwards.
*/
pg = (unsigned long)PAGE_ALIGN(__pa(start_pg));
pgend = (unsigned long)__pa(end_pg) & PAGE_MASK;
pg = PAGE_ALIGN(__pa(start_pg));
pgend = __pa(end_pg) & PAGE_MASK;
/*
* If there are free pages between these,
......
......@@ -331,10 +331,10 @@ void __iomem * __arm_ioremap_pfn_caller(unsigned long pfn,
return (void __iomem *) (offset + addr);
}
void __iomem *__arm_ioremap_caller(unsigned long phys_addr, size_t size,
void __iomem *__arm_ioremap_caller(phys_addr_t phys_addr, size_t size,
unsigned int mtype, void *caller)
{
unsigned long last_addr;
phys_addr_t last_addr;
unsigned long offset = phys_addr & ~PAGE_MASK;
unsigned long pfn = __phys_to_pfn(phys_addr);
......@@ -367,12 +367,12 @@ __arm_ioremap_pfn(unsigned long pfn, unsigned long offset, size_t size,
}
EXPORT_SYMBOL(__arm_ioremap_pfn);
void __iomem * (*arch_ioremap_caller)(unsigned long, size_t,
void __iomem * (*arch_ioremap_caller)(phys_addr_t, size_t,
unsigned int, void *) =
__arm_ioremap_caller;
void __iomem *
__arm_ioremap(unsigned long phys_addr, size_t size, unsigned int mtype)
__arm_ioremap(phys_addr_t phys_addr, size_t size, unsigned int mtype)
{
return arch_ioremap_caller(phys_addr, size, mtype,
__builtin_return_address(0));
......@@ -387,7 +387,7 @@ EXPORT_SYMBOL(__arm_ioremap);
* CONFIG_GENERIC_ALLOCATOR for allocating external memory.
*/
void __iomem *
__arm_ioremap_exec(unsigned long phys_addr, size_t size, bool cached)
__arm_ioremap_exec(phys_addr_t phys_addr, size_t size, bool cached)
{
unsigned int mtype;
......
......@@ -675,7 +675,8 @@ static void __init alloc_init_pmd(pud_t *pud, unsigned long addr,
}
static void __init alloc_init_pud(pgd_t *pgd, unsigned long addr,
unsigned long end, unsigned long phys, const struct mem_type *type)
unsigned long end, phys_addr_t phys,
const struct mem_type *type)
{
pud_t *pud = pud_offset(pgd, addr);
unsigned long next;
......@@ -989,27 +990,28 @@ phys_addr_t arm_lowmem_limit __initdata = 0;
void __init sanity_check_meminfo(void)
{
int i, j, highmem = 0;
phys_addr_t vmalloc_limit = __pa(vmalloc_min - 1) + 1;
for (i = 0, j = 0; i < meminfo.nr_banks; i++) {
struct membank *bank = &meminfo.bank[j];
*bank = meminfo.bank[i];
phys_addr_t size_limit;
if (bank->start > ULONG_MAX)
highmem = 1;
*bank = meminfo.bank[i];
size_limit = bank->size;
#ifdef CONFIG_HIGHMEM
if (__va(bank->start) >= vmalloc_min ||
__va(bank->start) < (void *)PAGE_OFFSET)
if (bank->start >= vmalloc_limit)
highmem = 1;
else
size_limit = vmalloc_limit - bank->start;
bank->highmem = highmem;
#ifdef CONFIG_HIGHMEM
/*
* Split those memory banks which are partially overlapping
* the vmalloc area greatly simplifying things later.
*/
if (!highmem && __va(bank->start) < vmalloc_min &&
bank->size > vmalloc_min - __va(bank->start)) {
if (!highmem && bank->size > size_limit) {
if (meminfo.nr_banks >= NR_BANKS) {
printk(KERN_CRIT "NR_BANKS too low, "
"ignoring high memory\n");
......@@ -1018,16 +1020,14 @@ void __init sanity_check_meminfo(void)
(meminfo.nr_banks - i) * sizeof(*bank));
meminfo.nr_banks++;
i++;
bank[1].size -= vmalloc_min - __va(bank->start);
bank[1].start = __pa(vmalloc_min - 1) + 1;
bank[1].size -= size_limit;
bank[1].start = vmalloc_limit;
bank[1].highmem = highmem = 1;
j++;
}
bank->size = vmalloc_min - __va(bank->start);
bank->size = size_limit;
}
#else
bank->highmem = highmem;
/*
* Highmem banks not allowed with !CONFIG_HIGHMEM.
*/
......@@ -1039,32 +1039,17 @@ void __init sanity_check_meminfo(void)
continue;
}
/*
* Check whether this memory bank would entirely overlap
* the vmalloc area.
*/
if (__va(bank->start) >= vmalloc_min ||
__va(bank->start) < (void *)PAGE_OFFSET) {
printk(KERN_NOTICE "Ignoring RAM at %.8llx-%.8llx "
"(vmalloc region overlap).\n",
(unsigned long long)bank->start,
(unsigned long long)bank->start + bank->size - 1);
continue;
}
/*
* Check whether this memory bank would partially overlap
* the vmalloc area.
*/
if (__va(bank->start + bank->size - 1) >= vmalloc_min ||
__va(bank->start + bank->size - 1) <= __va(bank->start)) {
unsigned long newsize = vmalloc_min - __va(bank->start);
if (bank->size > size_limit) {
printk(KERN_NOTICE "Truncating RAM at %.8llx-%.8llx "
"to -%.8llx (vmalloc region overlap).\n",
(unsigned long long)bank->start,
(unsigned long long)bank->start + bank->size - 1,
(unsigned long long)bank->start + newsize - 1);
bank->size = newsize;
(unsigned long long)bank->start + size_limit - 1);
bank->size = size_limit;
}
#endif
if (!bank->highmem && bank->start + bank->size > arm_lowmem_limit)
......
......@@ -8,6 +8,7 @@
#include <linux/pagemap.h>
#include <linux/io.h>
#include <linux/memblock.h>
#include <linux/kernel.h>
#include <asm/cacheflush.h>
#include <asm/sections.h>
......@@ -15,9 +16,260 @@
#include <asm/setup.h>
#include <asm/traps.h>
#include <asm/mach/arch.h>
#include <asm/cputype.h>
#include <asm/mpu.h>
#include "mm.h"
#ifdef CONFIG_ARM_MPU
struct mpu_rgn_info mpu_rgn_info;
/* Region number */
static void rgnr_write(u32 v)
{
asm("mcr p15, 0, %0, c6, c2, 0" : : "r" (v));
}
/* Data-side / unified region attributes */
/* Region access control register */
static void dracr_write(u32 v)
{
asm("mcr p15, 0, %0, c6, c1, 4" : : "r" (v));
}
/* Region size register */
static void drsr_write(u32 v)
{
asm("mcr p15, 0, %0, c6, c1, 2" : : "r" (v));
}
/* Region base address register */
static void drbar_write(u32 v)
{
asm("mcr p15, 0, %0, c6, c1, 0" : : "r" (v));
}
static u32 drbar_read(void)
{
u32 v;
asm("mrc p15, 0, %0, c6, c1, 0" : "=r" (v));
return v;
}
/* Optional instruction-side region attributes */
/* I-side Region access control register */
static void iracr_write(u32 v)
{
asm("mcr p15, 0, %0, c6, c1, 5" : : "r" (v));
}
/* I-side Region size register */
static void irsr_write(u32 v)
{
asm("mcr p15, 0, %0, c6, c1, 3" : : "r" (v));
}
/* I-side Region base address register */
static void irbar_write(u32 v)
{
asm("mcr p15, 0, %0, c6, c1, 1" : : "r" (v));
}
static unsigned long irbar_read(void)
{
unsigned long v;
asm("mrc p15, 0, %0, c6, c1, 1" : "=r" (v));
return v;
}
/* MPU initialisation functions */
void __init sanity_check_meminfo_mpu(void)
{
int i;
struct membank *bank = meminfo.bank;
phys_addr_t phys_offset = PHYS_OFFSET;
phys_addr_t aligned_region_size, specified_mem_size, rounded_mem_size;
/* Initially only use memory continuous from PHYS_OFFSET */
if (bank_phys_start(&bank[0]) != phys_offset)
panic("First memory bank must be contiguous from PHYS_OFFSET");
/* Banks have already been sorted by start address */
for (i = 1; i < meminfo.nr_banks; i++) {
if (bank[i].start <= bank_phys_end(&bank[0]) &&
bank_phys_end(&bank[i]) > bank_phys_end(&bank[0])) {
bank[0].size = bank_phys_end(&bank[i]) - bank[0].start;
} else {
pr_notice("Ignoring RAM after 0x%.8lx. "
"First non-contiguous (ignored) bank start: 0x%.8lx\n",
(unsigned long)bank_phys_end(&bank[0]),
(unsigned long)bank_phys_start(&bank[i]));
break;
}
}
/* All contiguous banks are now merged in to the first bank */
meminfo.nr_banks = 1;
specified_mem_size = bank[0].size;
/*
* MPU has curious alignment requirements: Size must be power of 2, and
* region start must be aligned to the region size
*/
if (phys_offset != 0)
pr_info("PHYS_OFFSET != 0 => MPU Region size constrained by alignment requirements\n");
/*
* Maximum aligned region might overflow phys_addr_t if phys_offset is
* 0. Hence we keep everything below 4G until we take the smaller of
* the aligned_region_size and rounded_mem_size, one of which is
* guaranteed to be smaller than the maximum physical address.
*/
aligned_region_size = (phys_offset - 1) ^ (phys_offset);
/* Find the max power-of-two sized region that fits inside our bank */
rounded_mem_size = (1 << __fls(bank[0].size)) - 1;
/* The actual region size is the smaller of the two */
aligned_region_size = aligned_region_size < rounded_mem_size
? aligned_region_size + 1
: rounded_mem_size + 1;
if (aligned_region_size != specified_mem_size)
pr_warn("Truncating memory from 0x%.8lx to 0x%.8lx (MPU region constraints)",
(unsigned long)specified_mem_size,
(unsigned long)aligned_region_size);
meminfo.bank[0].size = aligned_region_size;
pr_debug("MPU Region from 0x%.8lx size 0x%.8lx (end 0x%.8lx))\n",
(unsigned long)phys_offset,
(unsigned long)aligned_region_size,
(unsigned long)bank_phys_end(&bank[0]));
}
static int mpu_present(void)
{
return ((read_cpuid_ext(CPUID_EXT_MMFR0) & MMFR0_PMSA) == MMFR0_PMSAv7);
}
static int mpu_max_regions(void)
{
/*
* We don't support a different number of I/D side regions so if we
* have separate instruction and data memory maps then return
* whichever side has a smaller number of supported regions.
*/
u32 dregions, iregions, mpuir;
mpuir = read_cpuid(CPUID_MPUIR);
dregions = iregions = (mpuir & MPUIR_DREGION_SZMASK) >> MPUIR_DREGION;
/* Check for separate d-side and i-side memory maps */
if (mpuir & MPUIR_nU)
iregions = (mpuir & MPUIR_IREGION_SZMASK) >> MPUIR_IREGION;
/* Use the smallest of the two maxima */
return min(dregions, iregions);
}
static int mpu_iside_independent(void)
{
/* MPUIR.nU specifies whether there is *not* a unified memory map */
return read_cpuid(CPUID_MPUIR) & MPUIR_nU;
}
static int mpu_min_region_order(void)
{
u32 drbar_result, irbar_result;
/* We've kept a region free for this probing */
rgnr_write(MPU_PROBE_REGION);
isb();
/*
* As per ARM ARM, write 0xFFFFFFFC to DRBAR to find the minimum
* region order
*/
drbar_write(0xFFFFFFFC);
drbar_result = irbar_result = drbar_read();
drbar_write(0x0);
/* If the MPU is non-unified, we use the larger of the two minima*/
if (mpu_iside_independent()) {
irbar_write(0xFFFFFFFC);
irbar_result = irbar_read();
irbar_write(0x0);
}
isb(); /* Ensure that MPU region operations have completed */
/* Return whichever result is larger */
return __ffs(max(drbar_result, irbar_result));
}
static int mpu_setup_region(unsigned int number, phys_addr_t start,
unsigned int size_order, unsigned int properties)
{
u32 size_data;
/* We kept a region free for probing resolution of MPU regions*/
if (number > mpu_max_regions() || number == MPU_PROBE_REGION)
return -ENOENT;
if (size_order > 32)
return -ENOMEM;
if (size_order < mpu_min_region_order())
return -ENOMEM;
/* Writing N to bits 5:1 (RSR_SZ) specifies region size 2^N+1 */
size_data = ((size_order - 1) << MPU_RSR_SZ) | 1 << MPU_RSR_EN;
dsb(); /* Ensure all previous data accesses occur with old mappings */
rgnr_write(number);
isb();
drbar_write(start);
dracr_write(properties);
isb(); /* Propagate properties before enabling region */
drsr_write(size_data);
/* Check for independent I-side registers */
if (mpu_iside_independent()) {
irbar_write(start);
iracr_write(properties);
isb();
irsr_write(size_data);
}
isb();
/* Store region info (we treat i/d side the same, so only store d) */
mpu_rgn_info.rgns[number].dracr = properties;
mpu_rgn_info.rgns[number].drbar = start;
mpu_rgn_info.rgns[number].drsr = size_data;
return 0;
}
/*
* Set up default MPU regions, doing nothing if there is no MPU
*/
void __init mpu_setup(void)
{
int region_err;
if (!mpu_present())
return;
region_err = mpu_setup_region(MPU_RAM_REGION, PHYS_OFFSET,
ilog2(meminfo.bank[0].size),
MPU_AP_PL1RW_PL0RW | MPU_RGN_NORMAL);
if (region_err) {
panic("MPU region initialization failure! %d", region_err);
} else {
pr_info("Using ARMv7 PMSA Compliant MPU. "
"Region independence: %s, Max regions: %d\n",
mpu_iside_independent() ? "Yes" : "No",
mpu_max_regions());
}
}
#else
static void sanity_check_meminfo_mpu(void) {}
static void __init mpu_setup(void) {}
#endif /* CONFIG_ARM_MPU */
void __init arm_mm_memblock_reserve(void)
{
#ifndef CONFIG_CPU_V7M
......@@ -37,7 +289,9 @@ void __init arm_mm_memblock_reserve(void)
void __init sanity_check_meminfo(void)
{
phys_addr_t end = bank_phys_end(&meminfo.bank[meminfo.nr_banks - 1]);
phys_addr_t end;
sanity_check_meminfo_mpu();
end = bank_phys_end(&meminfo.bank[meminfo.nr_banks - 1]);
high_memory = __va(end - 1) + 1;
}
......@@ -48,6 +302,7 @@ void __init sanity_check_meminfo(void)
void __init paging_init(struct machine_desc *mdesc)
{
early_trap_init((void *)CONFIG_VECTORS_BASE);
mpu_setup();
bootmem_init();
}
......@@ -94,16 +349,16 @@ void __iomem *__arm_ioremap_pfn_caller(unsigned long pfn, unsigned long offset,
return __arm_ioremap_pfn(pfn, offset, size, mtype);
}
void __iomem *__arm_ioremap(unsigned long phys_addr, size_t size,
void __iomem *__arm_ioremap(phys_addr_t phys_addr, size_t size,
unsigned int mtype)
{
return (void __iomem *)phys_addr;
}
EXPORT_SYMBOL(__arm_ioremap);
void __iomem * (*arch_ioremap_caller)(unsigned long, size_t, unsigned int, void *);
void __iomem * (*arch_ioremap_caller)(phys_addr_t, size_t, unsigned int, void *);
void __iomem *__arm_ioremap_caller(unsigned long phys_addr, size_t size,
void __iomem *__arm_ioremap_caller(phys_addr_t phys_addr, size_t size,
unsigned int mtype, void *caller)
{
return __arm_ioremap(phys_addr, size, mtype);
......
......@@ -140,8 +140,10 @@ ENTRY(cpu_v6_set_pte_ext)
ENTRY(cpu_v6_do_suspend)
stmfd sp!, {r4 - r9, lr}
mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID
#ifdef CONFIG_MMU
mrc p15, 0, r5, c3, c0, 0 @ Domain ID
mrc p15, 0, r6, c2, c0, 1 @ Translation table base 1
#endif
mrc p15, 0, r7, c1, c0, 1 @ auxiliary control register
mrc p15, 0, r8, c1, c0, 2 @ co-processor access control
mrc p15, 0, r9, c1, c0, 0 @ control register
......@@ -158,14 +160,16 @@ ENTRY(cpu_v6_do_resume)
mcr p15, 0, ip, c13, c0, 1 @ set reserved context ID
ldmia r0, {r4 - r9}
mcr p15, 0, r4, c13, c0, 0 @ FCSE/PID
#ifdef CONFIG_MMU
mcr p15, 0, r5, c3, c0, 0 @ Domain ID
ALT_SMP(orr r1, r1, #TTB_FLAGS_SMP)
ALT_UP(orr r1, r1, #TTB_FLAGS_UP)
mcr p15, 0, r1, c2, c0, 0 @ Translation table base 0
mcr p15, 0, r6, c2, c0, 1 @ Translation table base 1
mcr p15, 0, ip, c2, c0, 2 @ TTB control register
#endif
mcr p15, 0, r7, c1, c0, 1 @ auxiliary control register
mcr p15, 0, r8, c1, c0, 2 @ co-processor access control
mcr p15, 0, ip, c2, c0, 2 @ TTB control register
mcr p15, 0, ip, c7, c5, 4 @ ISB
mov r0, r9 @ control register
b cpu_resume_mmu
......
......@@ -39,6 +39,14 @@
#define TTB_FLAGS_SMP (TTB_IRGN_WBWA|TTB_S|TTB_RGN_OC_WBWA)
#define PMD_FLAGS_SMP (PMD_SECT_WBWA|PMD_SECT_S)
#ifndef __ARMEB__
# define rpgdl r0
# define rpgdh r1
#else
# define rpgdl r1
# define rpgdh r0
#endif
/*
* cpu_v7_switch_mm(pgd_phys, tsk)
*
......@@ -47,10 +55,10 @@
*/
ENTRY(cpu_v7_switch_mm)
#ifdef CONFIG_MMU
mmid r1, r1 @ get mm->context.id
asid r3, r1
mov r3, r3, lsl #(48 - 32) @ ASID
mcrr p15, 0, r0, r3, c2 @ set TTB 0
mmid r2, r2
asid r2, r2
orr rpgdh, rpgdh, r2, lsl #(48 - 32) @ upper 32-bits of pgd
mcrr p15, 0, rpgdl, rpgdh, c2 @ set TTB 0
isb
#endif
mov pc, lr
......@@ -106,7 +114,8 @@ ENDPROC(cpu_v7_set_pte_ext)
*/
.macro v7_ttb_setup, zero, ttbr0, ttbr1, tmp
ldr \tmp, =swapper_pg_dir @ swapper_pg_dir virtual address
cmp \ttbr1, \tmp @ PHYS_OFFSET > PAGE_OFFSET? (branch below)
mov \tmp, \tmp, lsr #ARCH_PGD_SHIFT
cmp \ttbr1, \tmp @ PHYS_OFFSET > PAGE_OFFSET?
mrc p15, 0, \tmp, c2, c0, 2 @ TTB control register
orr \tmp, \tmp, #TTB_EAE
ALT_SMP(orr \tmp, \tmp, #TTB_FLAGS_SMP)
......@@ -114,27 +123,21 @@ ENDPROC(cpu_v7_set_pte_ext)
ALT_SMP(orr \tmp, \tmp, #TTB_FLAGS_SMP << 16)
ALT_UP(orr \tmp, \tmp, #TTB_FLAGS_UP << 16)
/*
* TTBR0/TTBR1 split (PAGE_OFFSET):
* 0x40000000: T0SZ = 2, T1SZ = 0 (not used)
* 0x80000000: T0SZ = 0, T1SZ = 1
* 0xc0000000: T0SZ = 0, T1SZ = 2
*
* Only use this feature if PHYS_OFFSET <= PAGE_OFFSET, otherwise
* booting secondary CPUs would end up using TTBR1 for the identity
* mapping set up in TTBR0.
* Only use split TTBRs if PHYS_OFFSET <= PAGE_OFFSET (cmp above),
* otherwise booting secondary CPUs would end up using TTBR1 for the
* identity mapping set up in TTBR0.
*/
bhi 9001f @ PHYS_OFFSET > PAGE_OFFSET?
orr \tmp, \tmp, #(((PAGE_OFFSET >> 30) - 1) << 16) @ TTBCR.T1SZ
#if defined CONFIG_VMSPLIT_2G
/* PAGE_OFFSET == 0x80000000, T1SZ == 1 */
add \ttbr1, \ttbr1, #1 << 4 @ skip two L1 entries
#elif defined CONFIG_VMSPLIT_3G
/* PAGE_OFFSET == 0xc0000000, T1SZ == 2 */
add \ttbr1, \ttbr1, #4096 * (1 + 3) @ only L2 used, skip pgd+3*pmd
#endif
/* CONFIG_VMSPLIT_1G does not need TTBR1 adjustment */
9001: mcr p15, 0, \tmp, c2, c0, 2 @ TTB control register
mcrr p15, 1, \ttbr1, \zero, c2 @ load TTBR1
orrls \tmp, \tmp, #TTBR1_SIZE @ TTBCR.T1SZ
mcr p15, 0, \tmp, c2, c0, 2 @ TTBCR
mov \tmp, \ttbr1, lsr #(32 - ARCH_PGD_SHIFT) @ upper bits
mov \ttbr1, \ttbr1, lsl #ARCH_PGD_SHIFT @ lower bits
addls \ttbr1, \ttbr1, #TTBR1_OFFSET
mcrr p15, 1, \ttbr1, \zero, c2 @ load TTBR1
mov \tmp, \ttbr0, lsr #(32 - ARCH_PGD_SHIFT) @ upper bits
mov \ttbr0, \ttbr0, lsl #ARCH_PGD_SHIFT @ lower bits
mcrr p15, 0, \ttbr0, \zero, c2 @ load TTBR0
mcrr p15, 1, \ttbr1, \zero, c2 @ load TTBR1
mcrr p15, 0, \ttbr0, \zero, c2 @ load TTBR0
.endm
__CPUINIT
......
......@@ -98,9 +98,11 @@ ENTRY(cpu_v7_do_suspend)
mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID
mrc p15, 0, r5, c13, c0, 3 @ User r/o thread ID
stmia r0!, {r4 - r5}
#ifdef CONFIG_MMU
mrc p15, 0, r6, c3, c0, 0 @ Domain ID
mrc p15, 0, r7, c2, c0, 1 @ TTB 1
mrc p15, 0, r11, c2, c0, 2 @ TTB control register
#endif
mrc p15, 0, r8, c1, c0, 0 @ Control register
mrc p15, 0, r9, c1, c0, 1 @ Auxiliary control register
mrc p15, 0, r10, c1, c0, 2 @ Co-processor access control
......@@ -110,13 +112,14 @@ ENDPROC(cpu_v7_do_suspend)
ENTRY(cpu_v7_do_resume)
mov ip, #0
mcr p15, 0, ip, c8, c7, 0 @ invalidate TLBs
mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache
mcr p15, 0, ip, c13, c0, 1 @ set reserved context ID
ldmia r0!, {r4 - r5}
mcr p15, 0, r4, c13, c0, 0 @ FCSE/PID
mcr p15, 0, r5, c13, c0, 3 @ User r/o thread ID
ldmia r0, {r6 - r11}
#ifdef CONFIG_MMU
mcr p15, 0, ip, c8, c7, 0 @ invalidate TLBs
mcr p15, 0, r6, c3, c0, 0 @ Domain ID
#ifndef CONFIG_ARM_LPAE
ALT_SMP(orr r1, r1, #TTB_FLAGS_SMP)
......@@ -125,14 +128,15 @@ ENTRY(cpu_v7_do_resume)
mcr p15, 0, r1, c2, c0, 0 @ TTB 0
mcr p15, 0, r7, c2, c0, 1 @ TTB 1
mcr p15, 0, r11, c2, c0, 2 @ TTB control register
mrc p15, 0, r4, c1, c0, 1 @ Read Auxiliary control register
teq r4, r9 @ Is it already set?
mcrne p15, 0, r9, c1, c0, 1 @ No, so write it
mcr p15, 0, r10, c1, c0, 2 @ Co-processor access control
ldr r4, =PRRR @ PRRR
ldr r5, =NMRR @ NMRR
mcr p15, 0, r4, c10, c2, 0 @ write PRRR
mcr p15, 0, r5, c10, c2, 1 @ write NMRR
#endif /* CONFIG_MMU */
mrc p15, 0, r4, c1, c0, 1 @ Read Auxiliary control register
teq r4, r9 @ Is it already set?
mcrne p15, 0, r9, c1, c0, 1 @ No, so write it
mcr p15, 0, r10, c1, c0, 2 @ Co-processor access control
isb
dsb
mov r0, r8 @ control register
......@@ -178,7 +182,8 @@ ENDPROC(cpu_pj4b_do_idle)
*/
__v7_ca5mp_setup:
__v7_ca9mp_setup:
mov r10, #(1 << 0) @ TLB ops broadcasting
__v7_cr7mp_setup:
mov r10, #(1 << 0) @ Cache/TLB ops broadcasting
b 1f
__v7_ca7mp_setup:
__v7_ca15mp_setup:
......@@ -442,6 +447,16 @@ __v7_pj4b_proc_info:
.size __v7_pj4b_proc_info, . - __v7_pj4b_proc_info
#endif
/*
* ARM Ltd. Cortex R7 processor.
*/
.type __v7_cr7mp_proc_info, #object
__v7_cr7mp_proc_info:
.long 0x410fc170
.long 0xff0ffff0
__v7_proc __v7_cr7mp_setup
.size __v7_cr7mp_proc_info, . - __v7_cr7mp_proc_info
/*
* ARM Ltd. Cortex A7 processor.
*/
......
......@@ -11,8 +11,6 @@
#include <linux/linkage.h>
#include <linux/init.h>
__INIT
/*
* Realview/Versatile Express specific entry point for secondary CPUs.
* This provides a "holding pen" into which all secondary cores are held
......
......@@ -110,16 +110,6 @@ static inline void __cpuinit arch_counter_set_user_access(void)
asm volatile("msr cntkctl_el1, %0" : : "r" (cntkctl));
}
static inline u64 arch_counter_get_cntpct(void)
{
u64 cval;
isb();
asm volatile("mrs %0, cntpct_el0" : "=r" (cval));
return cval;
}
static inline u64 arch_counter_get_cntvct(void)
{
u64 cval;
......
......@@ -186,27 +186,19 @@ u32 arch_timer_get_rate(void)
return arch_timer_rate;
}
/*
* Some external users of arch_timer_read_counter (e.g. sched_clock) may try to
* call it before it has been initialised. Rather than incur a performance
* penalty checking for initialisation, provide a default implementation that
* won't lead to time appearing to jump backwards.
*/
static u64 arch_timer_read_zero(void)
u64 arch_timer_read_counter(void)
{
return 0;
return arch_counter_get_cntvct();
}
u64 (*arch_timer_read_counter)(void) = arch_timer_read_zero;
static cycle_t arch_counter_read(struct clocksource *cs)
{
return arch_timer_read_counter();
return arch_counter_get_cntvct();
}
static cycle_t arch_counter_read_cc(const struct cyclecounter *cc)
{
return arch_timer_read_counter();
return arch_counter_get_cntvct();
}
static struct clocksource clocksource_counter = {
......@@ -287,7 +279,7 @@ static int __init arch_timer_register(void)
cyclecounter.mult = clocksource_counter.mult;
cyclecounter.shift = clocksource_counter.shift;
timecounter_init(&timecounter, &cyclecounter,
arch_counter_get_cntpct());
arch_counter_get_cntvct());
if (arch_timer_use_virtual) {
ppi = arch_timer_ppi[VIRT_PPI];
......@@ -376,11 +368,6 @@ static void __init arch_timer_init(struct device_node *np)
}
}
if (arch_timer_use_virtual)
arch_timer_read_counter = arch_counter_get_cntvct;
else
arch_timer_read_counter = arch_counter_get_cntpct;
arch_timer_register();
arch_timer_arch_init();
}
......
This diff is collapsed.
......@@ -94,6 +94,7 @@
/* Extended status bits for the ST Micro variants */
#define MCI_ST_SDIOIT (1 << 22)
#define MCI_ST_CEATAEND (1 << 23)
#define MCI_ST_CARDBUSY (1 << 24)
#define MMCICLEAR 0x038
#define MCI_CMDCRCFAILCLR (1 << 0)
......@@ -110,6 +111,7 @@
/* Extended status bits for the ST Micro variants */
#define MCI_ST_SDIOITC (1 << 22)
#define MCI_ST_CEATAENDC (1 << 23)
#define MCI_ST_BUSYENDC (1 << 24)
#define MMCIMASK0 0x03c
#define MCI_CMDCRCFAILMASK (1 << 0)
......@@ -183,6 +185,8 @@ struct mmci_host {
unsigned int cclk;
u32 pwr_reg;
u32 clk_reg;
u32 datactrl_reg;
bool vqmmc_enabled;
struct mmci_platform_data *plat;
struct variant_data *variant;
......
......@@ -32,7 +32,7 @@
#ifdef CONFIG_ARM_ARCH_TIMER
extern u32 arch_timer_get_rate(void);
extern u64 (*arch_timer_read_counter)(void);
extern u64 arch_timer_read_counter(void);
extern struct timecounter *arch_timer_get_timecounter(void);
#else
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment