Commit fb49b8c2 authored by Benoit Cousson's avatar Benoit Cousson Committed by Tony Lindgren

arm/dts: OMAP: Remove bootargs node from board files

Since 3.2, the CONFIG_ARM_ATAG_DTB_COMPAT config allows
an old bootloader to still use ATAG to provide cmdline.

Remove chosen/bootargs from the DTS board files.
Signed-off-by: default avatarBenoit Cousson <b-cousson@ti.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Acked-by: default avatarRob Herring <rob.herring@calxeda.com>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent b755706c
...@@ -13,15 +13,6 @@ / { ...@@ -13,15 +13,6 @@ / {
model = "TI OMAP3 BeagleBoard"; model = "TI OMAP3 BeagleBoard";
compatible = "ti,omap3-beagle", "ti,omap3"; compatible = "ti,omap3-beagle", "ti,omap3";
/*
* Since the initial device tree board file does not create any
* devices (MMC, network...), the only way to boot is to provide a
* ramdisk.
*/
chosen {
bootargs = "root=/dev/ram0 rw console=ttyO2,115200n8 initrd=0x81600000,20M ramdisk_size=20480 no_console_suspend debug earlyprintk";
};
memory { memory {
device_type = "memory"; device_type = "memory";
reg = <0x80000000 0x20000000>; /* 512 MB */ reg = <0x80000000 0x20000000>; /* 512 MB */
......
...@@ -13,15 +13,6 @@ / { ...@@ -13,15 +13,6 @@ / {
model = "TI OMAP4 PandaBoard"; model = "TI OMAP4 PandaBoard";
compatible = "ti,omap4-panda", "ti,omap4430", "ti,omap4"; compatible = "ti,omap4-panda", "ti,omap4430", "ti,omap4";
/*
* Since the initial device tree board file does not create any
* devices (MMC, network...), the only way to boot is to provide a
* ramdisk.
*/
chosen {
bootargs = "root=/dev/ram0 rw console=ttyO2,115200n8 initrd=0x81600000,20M ramdisk_size=20480 no_console_suspend debug";
};
memory { memory {
device_type = "memory"; device_type = "memory";
reg = <0x80000000 0x40000000>; /* 1 GB */ reg = <0x80000000 0x40000000>; /* 1 GB */
......
...@@ -13,15 +13,6 @@ / { ...@@ -13,15 +13,6 @@ / {
model = "TI OMAP4 SDP board"; model = "TI OMAP4 SDP board";
compatible = "ti,omap4-sdp", "ti,omap4430", "ti,omap4"; compatible = "ti,omap4-sdp", "ti,omap4430", "ti,omap4";
/*
* Since the initial device tree board file does not create any
* devices (MMC, network...), the only way to boot is to provide a
* ramdisk.
*/
chosen {
bootargs = "root=/dev/ram0 rw console=ttyO2,115200n8 initrd=0x81600000,20M ramdisk_size=20480 no_console_suspend debug";
};
memory { memory {
device_type = "memory"; device_type = "memory";
reg = <0x80000000 0x40000000>; /* 1 GB */ reg = <0x80000000 0x40000000>; /* 1 GB */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment