Commit fba4adbb authored by Ben Gardner's avatar Ben Gardner Committed by Wolfram Sang

i2c: designware: must wait for enable

One I2C bus on my Atom E3845 board has been broken since 4.9.
It has two devices, both declared by ACPI and with built-in drivers.

There are two back-to-back transactions originating from the kernel, one
targeting each device. The first transaction works, the second one locks
up the I2C controller. The controller never recovers.

These kernel logs show up whenever an I2C transaction is attempted after
this failure.
i2c-designware-pci 0000:00:18.3: timeout in disabling adapter
i2c-designware-pci 0000:00:18.3: timeout waiting for bus ready

Waiting for the I2C controller status to indicate that it is enabled
before programming it fixes the issue.

I have tested this patch on 4.14 and 4.15.

Fixes: commit 2702ea7d ("i2c: designware: wait for disable/enable only if necessary")
Cc: linux-stable <stable@vger.kernel.org> #4.13+
Signed-off-by: default avatarBen Gardner <gardner.ben@gmail.com>
Acked-by: default avatarJarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: default avatarJosé Roberto de Souza <jose.souza@intel.com>
Signed-off-by: default avatarWolfram Sang <wsa@the-dreams.de>
parent 91ab883e
......@@ -209,7 +209,7 @@ static void i2c_dw_xfer_init(struct dw_i2c_dev *dev)
i2c_dw_disable_int(dev);
/* Enable the adapter */
__i2c_dw_enable(dev, true);
__i2c_dw_enable_and_wait(dev, true);
/* Clear and enable interrupts */
dw_readl(dev, DW_IC_CLR_INTR);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment