Commit fbb19fe1 authored by Shubhrajyoti Datta's avatar Shubhrajyoti Datta Committed by Bartosz Golaszewski

gpio: pca9570: add slg7xl45106 support

Dialog semiconductors SLG7XL45106 is an 8-bit I2C GPO expander.
The output port is controlled by a data byte with register
address. Add a compatible string for the same. Also update
the driver to write and read from it.
Reviewed-by: default avatarLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: default avatarShubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Signed-off-by: default avatarBartosz Golaszewski <bartosz.golaszewski@linaro.org>
parent b8a34582
......@@ -15,6 +15,8 @@
#include <linux/mutex.h>
#include <linux/property.h>
#define SLG7XL45106_GPO_REG 0xDB
/**
* struct pca9570_platform_data - GPIO platformdata
* @ngpio: no of gpios
......@@ -44,7 +46,11 @@ static int pca9570_read(struct pca9570 *gpio, u8 *value)
struct i2c_client *client = to_i2c_client(gpio->chip.parent);
int ret;
ret = i2c_smbus_read_byte(client);
if (gpio->p_data->command != 0)
ret = i2c_smbus_read_byte_data(client, gpio->p_data->command);
else
ret = i2c_smbus_read_byte(client);
if (ret < 0)
return ret;
......@@ -56,6 +62,9 @@ static int pca9570_write(struct pca9570 *gpio, u8 value)
{
struct i2c_client *client = to_i2c_client(gpio->chip.parent);
if (gpio->p_data->command != 0)
return i2c_smbus_write_byte_data(client, gpio->p_data->command, value);
return i2c_smbus_write_byte(client, value);
}
......@@ -140,14 +149,21 @@ static const struct pca9570_platform_data pca9571_gpio = {
.ngpio = 8,
};
static const struct pca9570_platform_data slg7xl45106_gpio = {
.ngpio = 8,
.command = SLG7XL45106_GPO_REG,
};
static const struct i2c_device_id pca9570_id_table[] = {
{ "pca9570", (kernel_ulong_t)&pca9570_gpio},
{ "pca9571", (kernel_ulong_t)&pca9571_gpio },
{ "slg7xl45106", (kernel_ulong_t)&slg7xl45106_gpio },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(i2c, pca9570_id_table);
static const struct of_device_id pca9570_of_match_table[] = {
{ .compatible = "dlg,slg7xl45106", .data = &slg7xl45106_gpio},
{ .compatible = "nxp,pca9570", .data = &pca9570_gpio },
{ .compatible = "nxp,pca9571", .data = &pca9571_gpio },
{ /* sentinel */ }
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment