Commit fc09acb7 authored by Douglas Gilbert's avatar Douglas Gilbert Committed by Martin K. Petersen

scsi: scsi_debug: Fix cmd_per_lun, set to max_queue

Make sure that the cmd_per_lun value placed in the host template never
exceeds the can_queue value. If the max_queue driver parameter is not
specified then both cmd_per_lun and can_queue are set to CAN_QUEUE.
CAN_QUEUE is a compile time constant and is used to dimension an array to
hold queued requests. If the max_queue driver parameter is given it is must
be less than or equal to CAN_QUEUE and if so, the host template values are
adjusted.

Remove undocumented code that allowed queue_depth to exceed CAN_QUEUE and
cause stack full type errors. There is a documented way to do that with
every_nth and

    echo 0x8000 > /sys/bus/pseudo/drivers/scsi_debug/opts

See: https://sg.danny.cz/sg/scsi_debug.html

Tweak some formatting, and add a suggestion to the "trim poll_queues"
warning.

Link: https://lore.kernel.org/r/20210415015031.607153-1-dgilbert@interlog.comReported-by: default avatarKashyap Desai <kashyap.desai@broadcom.com>
Reviewed-by: default avatarJohn Garry <john.garry@hauwei.com>
Signed-off-by: default avatarDouglas Gilbert <dgilbert@interlog.com>
Signed-off-by: default avatarJohn Garry <john.garry@huawei.com>
Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
parent ce4f62f9
......@@ -218,7 +218,7 @@ static const char *sdebug_version_date = "20200710";
*/
#define SDEBUG_CANQUEUE_WORDS 3 /* a WORD is bits in a long */
#define SDEBUG_CANQUEUE (SDEBUG_CANQUEUE_WORDS * BITS_PER_LONG)
#define DEF_CMD_PER_LUN 255
#define DEF_CMD_PER_LUN SDEBUG_CANQUEUE
/* UA - Unit Attention; SA - Service Action; SSU - Start Stop Unit */
#define F_D_IN 1 /* Data-in command (e.g. READ) */
......@@ -5695,8 +5695,8 @@ MODULE_PARM_DESC(lbpu, "enable LBP, support UNMAP command (def=0)");
MODULE_PARM_DESC(lbpws, "enable LBP, support WRITE SAME(16) with UNMAP bit (def=0)");
MODULE_PARM_DESC(lbpws10, "enable LBP, support WRITE SAME(10) with UNMAP bit (def=0)");
MODULE_PARM_DESC(lowest_aligned, "lowest aligned lba (def=0)");
MODULE_PARM_DESC(max_luns, "number of LUNs per target to simulate(def=1)");
MODULE_PARM_DESC(lun_format, "LUN format: 0->peripheral (def); 1 --> flat address method");
MODULE_PARM_DESC(max_luns, "number of LUNs per target to simulate(def=1)");
MODULE_PARM_DESC(max_queue, "max number of queued commands (1 to max(def))");
MODULE_PARM_DESC(medium_error_count, "count of sectors to return follow on MEDIUM error");
MODULE_PARM_DESC(medium_error_start, "starting sector number to return MEDIUM error");
......@@ -5710,7 +5710,7 @@ MODULE_PARM_DESC(opt_xferlen_exp, "optimal transfer length granularity exponent
MODULE_PARM_DESC(opts, "1->noise, 2->medium_err, 4->timeout, 8->recovered_err... (def=0)");
MODULE_PARM_DESC(per_host_store, "If set, next positive add_host will get new store (def=0)");
MODULE_PARM_DESC(physblk_exp, "physical block exponent (def=0)");
MODULE_PARM_DESC(poll_queues, "support for iouring iopoll queues (1 to max(submit_queues - 1)");
MODULE_PARM_DESC(poll_queues, "support for iouring iopoll queues (1 to max(submit_queues - 1))");
MODULE_PARM_DESC(ptype, "SCSI peripheral type(def=0[disk])");
MODULE_PARM_DESC(random, "If set, uniformly randomize command duration between 0 and delay_in_ns");
MODULE_PARM_DESC(removable, "claim to have removable media (def=0)");
......@@ -7165,12 +7165,15 @@ static int sdebug_change_qdepth(struct scsi_device *sdev, int qdepth)
}
num_in_q = atomic_read(&devip->num_in_q);
if (qdepth > SDEBUG_CANQUEUE) {
qdepth = SDEBUG_CANQUEUE;
pr_warn("%s: requested qdepth [%d] exceeds canqueue [%d], trim\n", __func__,
qdepth, SDEBUG_CANQUEUE);
}
if (qdepth < 1)
qdepth = 1;
/* allow to exceed max host qc_arr elements for testing */
if (qdepth > SDEBUG_CANQUEUE + 10)
qdepth = SDEBUG_CANQUEUE + 10;
scsi_change_queue_depth(sdev, qdepth);
if (qdepth != sdev->queue_depth)
scsi_change_queue_depth(sdev, qdepth);
if (SDEBUG_OPT_Q_NOISE & sdebug_opts) {
sdev_printk(KERN_INFO, sdev, "%s: qdepth=%d, num_in_q=%d\n",
......@@ -7558,6 +7561,7 @@ static int sdebug_driver_probe(struct device *dev)
sdbg_host = to_sdebug_host(dev);
sdebug_driver_template.can_queue = sdebug_max_queue;
sdebug_driver_template.cmd_per_lun = sdebug_max_queue;
if (!sdebug_clustering)
sdebug_driver_template.dma_boundary = PAGE_SIZE - 1;
......@@ -7593,7 +7597,11 @@ static int sdebug_driver_probe(struct device *dev)
* If condition not met, trim poll_queues to 1 (just for simplicity).
*/
if (poll_queues >= submit_queues) {
pr_warn("%s: trim poll_queues to 1\n", my_name);
if (submit_queues < 3)
pr_warn("%s: trim poll_queues to 1\n", my_name);
else
pr_warn("%s: trim poll_queues to 1. Perhaps try poll_queues=%d\n",
my_name, submit_queues - 1);
poll_queues = 1;
}
if (poll_queues)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment