Commit fc0f39bc authored by Brett Creeley's avatar Brett Creeley Committed by Jeff Kirsher

ice: Add code to keep track of current dflt_vsi

We can't have more than one default VSI so prevent another VSI from
overwriting the current dflt_vsi. This was achieved by adding the
following functions:

ice_is_dflt_vsi_in_use()
- Used to check if the default VSI is already being used.

ice_is_vsi_dflt_vsi()
- Used to check if VSI passed in is in fact the default VSI.

ice_set_dflt_vsi()
- Used to set the default VSI via a switch rule

ice_clear_dflt_vsi()
- Used to clear the default VSI via a switch rule.

Also, there was no need to introduce any locking because all mailbox
events and synchronization of switch filters for the PF happen in the
service task.
Signed-off-by: default avatarBrett Creeley <brett.creeley@intel.com>
Tested-by: default avatarAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
parent cd6d6b83
......@@ -174,6 +174,8 @@ struct ice_sw {
struct ice_pf *pf;
u16 sw_id; /* switch ID for this switch */
u16 bridge_mode; /* VEB/VEPA/Port Virtualizer */
struct ice_vsi *dflt_vsi; /* default VSI for this switch */
u8 dflt_vsi_ena:1; /* true if above dflt_vsi is enabled */
};
enum ice_state {
......
......@@ -2742,3 +2742,121 @@ ice_vsi_cfg_mac_fltr(struct ice_vsi *vsi, const u8 *macaddr, bool set)
ice_free_fltr_list(&vsi->back->pdev->dev, &tmp_add_list);
return status;
}
/**
* ice_is_dflt_vsi_in_use - check if the default forwarding VSI is being used
* @sw: switch to check if its default forwarding VSI is free
*
* Return true if the default forwarding VSI is already being used, else returns
* false signalling that it's available to use.
*/
bool ice_is_dflt_vsi_in_use(struct ice_sw *sw)
{
return (sw->dflt_vsi && sw->dflt_vsi_ena);
}
/**
* ice_is_vsi_dflt_vsi - check if the VSI passed in is the default VSI
* @sw: switch for the default forwarding VSI to compare against
* @vsi: VSI to compare against default forwarding VSI
*
* If this VSI passed in is the default forwarding VSI then return true, else
* return false
*/
bool ice_is_vsi_dflt_vsi(struct ice_sw *sw, struct ice_vsi *vsi)
{
return (sw->dflt_vsi == vsi && sw->dflt_vsi_ena);
}
/**
* ice_set_dflt_vsi - set the default forwarding VSI
* @sw: switch used to assign the default forwarding VSI
* @vsi: VSI getting set as the default forwarding VSI on the switch
*
* If the VSI passed in is already the default VSI and it's enabled just return
* success.
*
* If there is already a default VSI on the switch and it's enabled then return
* -EEXIST since there can only be one default VSI per switch.
*
* Otherwise try to set the VSI passed in as the switch's default VSI and
* return the result.
*/
int ice_set_dflt_vsi(struct ice_sw *sw, struct ice_vsi *vsi)
{
enum ice_status status;
struct device *dev;
if (!sw || !vsi)
return -EINVAL;
dev = ice_pf_to_dev(vsi->back);
/* the VSI passed in is already the default VSI */
if (ice_is_vsi_dflt_vsi(sw, vsi)) {
dev_dbg(dev, "VSI %d passed in is already the default forwarding VSI, nothing to do\n",
vsi->vsi_num);
return 0;
}
/* another VSI is already the default VSI for this switch */
if (ice_is_dflt_vsi_in_use(sw)) {
dev_err(dev,
"Default forwarding VSI %d already in use, disable it and try again\n",
sw->dflt_vsi->vsi_num);
return -EEXIST;
}
status = ice_cfg_dflt_vsi(&vsi->back->hw, vsi->idx, true, ICE_FLTR_RX);
if (status) {
dev_err(dev,
"Failed to set VSI %d as the default forwarding VSI, error %d\n",
vsi->vsi_num, status);
return -EIO;
}
sw->dflt_vsi = vsi;
sw->dflt_vsi_ena = true;
return 0;
}
/**
* ice_clear_dflt_vsi - clear the default forwarding VSI
* @sw: switch used to clear the default VSI
*
* If the switch has no default VSI or it's not enabled then return error.
*
* Otherwise try to clear the default VSI and return the result.
*/
int ice_clear_dflt_vsi(struct ice_sw *sw)
{
struct ice_vsi *dflt_vsi;
enum ice_status status;
struct device *dev;
if (!sw)
return -EINVAL;
dev = ice_pf_to_dev(sw->pf);
dflt_vsi = sw->dflt_vsi;
/* there is no default VSI configured */
if (!ice_is_dflt_vsi_in_use(sw))
return -ENODEV;
status = ice_cfg_dflt_vsi(&dflt_vsi->back->hw, dflt_vsi->idx, false,
ICE_FLTR_RX);
if (status) {
dev_err(dev,
"Failed to clear the default forwarding VSI %d, error %d\n",
dflt_vsi->vsi_num, status);
return -EIO;
}
sw->dflt_vsi = NULL;
sw->dflt_vsi_ena = false;
return 0;
}
......@@ -103,4 +103,12 @@ enum ice_status
ice_vsi_cfg_mac_fltr(struct ice_vsi *vsi, const u8 *macaddr, bool set);
bool ice_is_safe_mode(struct ice_pf *pf);
bool ice_is_dflt_vsi_in_use(struct ice_sw *sw);
bool ice_is_vsi_dflt_vsi(struct ice_sw *sw, struct ice_vsi *vsi);
int ice_set_dflt_vsi(struct ice_sw *sw, struct ice_vsi *vsi);
int ice_clear_dflt_vsi(struct ice_sw *sw);
#endif /* !_ICE_LIB_H_ */
......@@ -379,25 +379,29 @@ static int ice_vsi_sync_fltr(struct ice_vsi *vsi)
clear_bit(ICE_VSI_FLAG_PROMISC_CHANGED, vsi->flags);
if (vsi->current_netdev_flags & IFF_PROMISC) {
/* Apply Rx filter rule to get traffic from wire */
status = ice_cfg_dflt_vsi(hw, vsi->idx, true,
ICE_FLTR_RX);
if (status) {
netdev_err(netdev, "Error setting default VSI %i Rx rule\n",
vsi->vsi_num);
vsi->current_netdev_flags &= ~IFF_PROMISC;
err = -EIO;
goto out_promisc;
if (!ice_is_dflt_vsi_in_use(pf->first_sw)) {
err = ice_set_dflt_vsi(pf->first_sw, vsi);
if (err && err != -EEXIST) {
netdev_err(netdev,
"Error %d setting default VSI %i Rx rule\n",
err, vsi->vsi_num);
vsi->current_netdev_flags &=
~IFF_PROMISC;
goto out_promisc;
}
}
} else {
/* Clear Rx filter to remove traffic from wire */
status = ice_cfg_dflt_vsi(hw, vsi->idx, false,
ICE_FLTR_RX);
if (status) {
netdev_err(netdev, "Error clearing default VSI %i Rx rule\n",
vsi->vsi_num);
vsi->current_netdev_flags |= IFF_PROMISC;
err = -EIO;
goto out_promisc;
if (ice_is_vsi_dflt_vsi(pf->first_sw, vsi)) {
err = ice_clear_dflt_vsi(pf->first_sw);
if (err) {
netdev_err(netdev,
"Error %d clearing default VSI %i Rx rule\n",
err, vsi->vsi_num);
vsi->current_netdev_flags |=
IFF_PROMISC;
goto out_promisc;
}
}
}
}
......@@ -4671,6 +4675,13 @@ static void ice_rebuild(struct ice_pf *pf, enum ice_reset_req reset_type)
goto err_init_ctrlq;
}
if (pf->first_sw->dflt_vsi_ena)
dev_info(dev,
"Clearing default VSI, re-enable after reset completes\n");
/* clear the default VSI configuration if it exists */
pf->first_sw->dflt_vsi = NULL;
pf->first_sw->dflt_vsi_ena = false;
ice_clear_pxe_mode(hw);
ret = ice_get_caps(hw);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment