Commit fc589ee4 authored by Nicholas Piggin's avatar Nicholas Piggin Committed by Michael Ellerman

powerpc/64s/exception: Remove old INT_ENTRY macro

Signed-off-by: default avatarNicholas Piggin <npiggin@gmail.com>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200225173541.1549955-7-npiggin@gmail.com
parent 4f50541f
......@@ -482,13 +482,13 @@ END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948)
* - Fall through and continue executing in real, unrelocated mode.
* This is done if early=2.
*/
.macro INT_HANDLER name, vec, ool=0, early=0, virt=0, hsrr=0, area=PACA_EXGEN, ri=1, dar=0, dsisr=0, bitmask=0, kvm=0
.macro GEN_INT_ENTRY name, virt, ool=0
SET_SCRATCH0(r13) /* save r13 */
GET_PACA(r13)
std r9,\area\()+EX_R9(r13) /* save r9 */
std r9,IAREA+EX_R9(r13) /* save r9 */
OPT_GET_SPR(r9, SPRN_PPR, CPU_FTR_HAS_PPR)
HMT_MEDIUM
std r10,\area\()+EX_R10(r13) /* save r10 - r12 */
std r10,IAREA+EX_R10(r13) /* save r10 - r12 */
OPT_GET_SPR(r10, SPRN_CFAR, CPU_FTR_CFAR)
.if \ool
.if !\virt
......@@ -502,47 +502,47 @@ END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948)
.endif
.endif
OPT_SAVE_REG_TO_PACA(\area\()+EX_PPR, r9, CPU_FTR_HAS_PPR)
OPT_SAVE_REG_TO_PACA(\area\()+EX_CFAR, r10, CPU_FTR_CFAR)
OPT_SAVE_REG_TO_PACA(IAREA+EX_PPR, r9, CPU_FTR_HAS_PPR)
OPT_SAVE_REG_TO_PACA(IAREA+EX_CFAR, r10, CPU_FTR_CFAR)
INTERRUPT_TO_KERNEL
SAVE_CTR(r10, \area\())
SAVE_CTR(r10, IAREA)
mfcr r9
.if \kvm
KVMTEST \name \hsrr \vec
.if (!\virt && IKVM_REAL) || (\virt && IKVM_VIRT)
KVMTEST \name IHSRR IVEC
.endif
.if \bitmask
.if IMASK
lbz r10,PACAIRQSOFTMASK(r13)
andi. r10,r10,\bitmask
andi. r10,r10,IMASK
/* Associate vector numbers with bits in paca->irq_happened */
.if \vec == 0x500 || \vec == 0xea0
.if IVEC == 0x500 || IVEC == 0xea0
li r10,PACA_IRQ_EE
.elseif \vec == 0x900
.elseif IVEC == 0x900
li r10,PACA_IRQ_DEC
.elseif \vec == 0xa00 || \vec == 0xe80
.elseif IVEC == 0xa00 || IVEC == 0xe80
li r10,PACA_IRQ_DBELL
.elseif \vec == 0xe60
.elseif IVEC == 0xe60
li r10,PACA_IRQ_HMI
.elseif \vec == 0xf00
.elseif IVEC == 0xf00
li r10,PACA_IRQ_PMI
.else
.abort "Bad maskable vector"
.endif
.if \hsrr == EXC_HV_OR_STD
.if IHSRR == EXC_HV_OR_STD
BEGIN_FTR_SECTION
bne masked_Hinterrupt
FTR_SECTION_ELSE
bne masked_interrupt
ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206)
.elseif \hsrr
.elseif IHSRR
bne masked_Hinterrupt
.else
bne masked_interrupt
.endif
.endif
std r11,\area\()+EX_R11(r13)
std r12,\area\()+EX_R12(r13)
std r11,IAREA+EX_R11(r13)
std r12,IAREA+EX_R12(r13)
/*
* DAR/DSISR, SCRATCH0 must be read before setting MSR[RI],
......@@ -550,47 +550,39 @@ END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948)
* not recoverable if they are live.
*/
GET_SCRATCH0(r10)
std r10,\area\()+EX_R13(r13)
.if \dar == 1
.if \hsrr
std r10,IAREA+EX_R13(r13)
.if IDAR == 1
.if IHSRR
mfspr r10,SPRN_HDAR
.else
mfspr r10,SPRN_DAR
.endif
std r10,\area\()+EX_DAR(r13)
std r10,IAREA+EX_DAR(r13)
.endif
.if \dsisr == 1
.if \hsrr
.if IDSISR == 1
.if IHSRR
mfspr r10,SPRN_HDSISR
.else
mfspr r10,SPRN_DSISR
.endif
stw r10,\area\()+EX_DSISR(r13)
stw r10,IAREA+EX_DSISR(r13)
.endif
.if \early == 2
.if IEARLY == 2
/* nothing more */
.elseif \early
.elseif IEARLY
mfctr r10 /* save ctr, even for !RELOCATABLE */
BRANCH_TO_C000(r11, \name\()_common)
.elseif !\virt
INT_SAVE_SRR_AND_JUMP \name\()_common, \hsrr, \ri
INT_SAVE_SRR_AND_JUMP \name\()_common, IHSRR, ISET_RI
.else
INT_VIRT_SAVE_SRR_AND_JUMP \name\()_common, \hsrr
INT_VIRT_SAVE_SRR_AND_JUMP \name\()_common, IHSRR
.endif
.if \ool
.popsection
.endif
.endm
.macro GEN_INT_ENTRY name, virt, ool=0
.if ! \virt
INT_HANDLER \name, IVEC, \ool, IEARLY, \virt, IHSRR, IAREA, ISET_RI, IDAR, IDSISR, IMASK, IKVM_REAL
.else
INT_HANDLER \name, IVEC, \ool, IEARLY, \virt, IHSRR, IAREA, ISET_RI, IDAR, IDSISR, IMASK, IKVM_VIRT
.endif
.endm
/*
* On entry r13 points to the paca, r9-r13 are saved in the paca,
* r9 contains the saved CR, r11 and r12 contain the saved SRR0 and
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment