Commit fca53d86 authored by Axel Lin's avatar Axel Lin Committed by Mark Brown

regulator: twl: Set enable enable_time in regulator_desc

Signed-off-by: default avatarAxel Lin <axel.lin@gmail.com>
Signed-off-by: default avatarMark Brown <broonie@opensource.wolfsonmicro.com>
parent 4b7c948f
......@@ -43,9 +43,6 @@ struct twlreg_info {
u8 table_len;
const u16 *table;
/* regulator specific turn-on delay */
u16 delay;
/* State REMAP default configuration */
u8 remap;
......@@ -223,20 +220,6 @@ static int twl6030reg_enable(struct regulator_dev *rdev)
return ret;
}
static int twl4030reg_enable_time(struct regulator_dev *rdev)
{
struct twlreg_info *info = rdev_get_drvdata(rdev);
return info->delay;
}
static int twl6030reg_enable_time(struct regulator_dev *rdev)
{
struct twlreg_info *info = rdev_get_drvdata(rdev);
return info->delay;
}
static int twl4030reg_disable(struct regulator_dev *rdev)
{
struct twlreg_info *info = rdev_get_drvdata(rdev);
......@@ -508,7 +491,6 @@ static struct regulator_ops twl4030ldo_ops = {
.enable = twl4030reg_enable,
.disable = twl4030reg_disable,
.is_enabled = twl4030reg_is_enabled,
.enable_time = twl4030reg_enable_time,
.set_mode = twl4030reg_set_mode,
......@@ -622,7 +604,6 @@ static struct regulator_ops twl6030ldo_ops = {
.enable = twl6030reg_enable,
.disable = twl6030reg_disable,
.is_enabled = twl6030reg_is_enabled,
.enable_time = twl6030reg_enable_time,
.set_mode = twl6030reg_set_mode,
......@@ -656,7 +637,6 @@ static struct regulator_ops twl4030fixed_ops = {
.enable = twl4030reg_enable,
.disable = twl4030reg_disable,
.is_enabled = twl4030reg_is_enabled,
.enable_time = twl4030reg_enable_time,
.set_mode = twl4030reg_set_mode,
......@@ -671,7 +651,6 @@ static struct regulator_ops twl6030fixed_ops = {
.enable = twl6030reg_enable,
.disable = twl6030reg_disable,
.is_enabled = twl6030reg_is_enabled,
.enable_time = twl6030reg_enable_time,
.set_mode = twl6030reg_set_mode,
......@@ -682,7 +661,6 @@ static struct regulator_ops twl6030_fixed_resource = {
.enable = twl6030reg_enable,
.disable = twl6030reg_disable,
.is_enabled = twl6030reg_is_enabled,
.enable_time = twl6030reg_enable_time,
.get_status = twl6030reg_get_status,
};
......@@ -879,7 +857,6 @@ static struct regulator_ops twlsmps_ops = {
.enable = twl6030reg_enable,
.disable = twl6030reg_disable,
.is_enabled = twl6030reg_is_enabled,
.enable_time = twl6030reg_enable_time,
.set_mode = twl6030reg_set_mode,
......@@ -902,7 +879,6 @@ static struct twlreg_info TWL4030_INFO_##label = { \
.id = num, \
.table_len = ARRAY_SIZE(label##_VSEL_table), \
.table = label##_VSEL_table, \
.delay = turnon_delay, \
.remap = remap_conf, \
.desc = { \
.name = #label, \
......@@ -911,6 +887,7 @@ static struct twlreg_info TWL4030_INFO_##label = { \
.ops = &twl4030ldo_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.enable_time = turnon_delay, \
}, \
}
......@@ -918,7 +895,6 @@ static struct twlreg_info TWL4030_INFO_##label = { \
static struct twlreg_info TWL4030_INFO_##label = { \
.base = offset, \
.id = num, \
.delay = turnon_delay, \
.remap = remap_conf, \
.desc = { \
.name = #label, \
......@@ -926,6 +902,7 @@ static struct twlreg_info TWL4030_INFO_##label = { \
.ops = &twl4030smps_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.enable_time = turnon_delay, \
}, \
}
......@@ -980,7 +957,6 @@ static struct twlreg_info TWLFIXED_INFO_##label = { \
.base = offset, \
.id = num, \
.min_mV = mVolts, \
.delay = turnon_delay, \
.remap = remap_conf, \
.desc = { \
.name = #label, \
......@@ -989,19 +965,20 @@ static struct twlreg_info TWLFIXED_INFO_##label = { \
.ops = &operations, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.enable_time = turnon_delay, \
}, \
}
#define TWL6030_FIXED_RESOURCE(label, offset, turnon_delay) \
static struct twlreg_info TWLRES_INFO_##label = { \
.base = offset, \
.delay = turnon_delay, \
.desc = { \
.name = #label, \
.id = TWL6030_REG_##label, \
.ops = &twl6030_fixed_resource, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.enable_time = turnon_delay, \
}, \
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment