rtlwifi: rtl8192se Rename RT_TRACE to rtl_dbg

Change the misleading macro name to one that is more descriptive for
rtl8192se. Changes suggested by ckeckpatch.pl have been made.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200723204244.24457-11-Larry.Finger@lwfinger.net

drivers/net/wireless/realtek/rtlwifi/rtl8192se/dm.c

@@ -144,10 +144,10 @@ static void _rtl92s_dm_txpowertracking_callback_thermalmeter(
 
 	thermalvalue = (u8)rtl_get_rfreg(hw, RF90_PATH_A, RF_T_METER, 0x1f);
 
-	RT_TRACE(rtlpriv, COMP_POWER_TRACKING, DBG_LOUD,
-		 "Readback Thermal Meter = 0x%x pre thermal meter 0x%x eeprom_thermal meter 0x%x\n",
-		 thermalvalue,
-		 rtlpriv->dm.thermalvalue, rtlefuse->eeprom_thermalmeter);
+	rtl_dbg(rtlpriv, COMP_POWER_TRACKING, DBG_LOUD,
+		"Readback Thermal Meter = 0x%x pre thermal meter 0x%x eeprom_thermal meter 0x%x\n",
+		thermalvalue,
+		rtlpriv->dm.thermalvalue, rtlefuse->eeprom_thermalmeter);
 
 	if (thermalvalue) {
 		rtlpriv->dm.thermalvalue = thermalvalue;
@@ -158,8 +158,8 @@ static void _rtl92s_dm_txpowertracking_callback_thermalmeter(
 				 (rtlpriv->efuse.thermalmeter[0] << 8) |
 				 (thermalvalue << 16));
 
-			RT_TRACE(rtlpriv, COMP_POWER_TRACKING, DBG_LOUD,
-				 "Write to FW Thermal Val = 0x%x\n", fw_cmd);
+			rtl_dbg(rtlpriv, COMP_POWER_TRACKING, DBG_LOUD,
+				"Write to FW Thermal Val = 0x%x\n", fw_cmd);
 
 			rtl_write_dword(rtlpriv, WFM5, fw_cmd);
 			rtl92s_phy_chk_fwcmd_iodone(hw);
@@ -264,10 +264,10 @@ static void _rtl92s_dm_refresh_rateadaptive_mask(struct ieee80211_hw *hw)
 		}
 
 		if (ra->pre_ratr_state != ra->ratr_state) {
-			RT_TRACE(rtlpriv, COMP_RATE, DBG_LOUD,
-				 "RSSI = %ld RSSI_LEVEL = %d PreState = %d, CurState = %d\n",
-				 rtlpriv->dm.undec_sm_pwdb, ra->ratr_state,
-				 ra->pre_ratr_state, ra->ratr_state);
+			rtl_dbg(rtlpriv, COMP_RATE, DBG_LOUD,
+				"RSSI = %ld RSSI_LEVEL = %d PreState = %d, CurState = %d\n",
+				rtlpriv->dm.undec_sm_pwdb, ra->ratr_state,
+				ra->pre_ratr_state, ra->ratr_state);
 
 			rcu_read_lock();
 			sta = rtl_find_sta(hw, mac->bssid);
@@ -576,8 +576,8 @@ static void _rtl92s_dm_dynamic_txpower(struct ieee80211_hw *hw)
 
 	if ((mac->link_state < MAC80211_LINKED) &&
 	    (rtlpriv->dm.entry_min_undec_sm_pwdb == 0)) {
-		RT_TRACE(rtlpriv, COMP_POWER, DBG_TRACE,
-			 "Not connected to any\n");
+		rtl_dbg(rtlpriv, COMP_POWER, DBG_TRACE,
+			"Not connected to any\n");
 
 		rtlpriv->dm.dynamic_txhighpower_lvl = TX_HIGHPWR_LEVEL_NORMAL;
 
@@ -588,21 +588,21 @@ static void _rtl92s_dm_dynamic_txpower(struct ieee80211_hw *hw)
 	if (mac->link_state >= MAC80211_LINKED) {
 		if (mac->opmode == NL80211_IFTYPE_ADHOC) {
 			undec_sm_pwdb = rtlpriv->dm.entry_min_undec_sm_pwdb;
-			RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
-				 "AP Client PWDB = 0x%lx\n",
-				 undec_sm_pwdb);
+			rtl_dbg(rtlpriv, COMP_POWER, DBG_LOUD,
+				"AP Client PWDB = 0x%lx\n",
+				undec_sm_pwdb);
 		} else {
 			undec_sm_pwdb = rtlpriv->dm.undec_sm_pwdb;
-			RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
-				 "STA Default Port PWDB = 0x%lx\n",
-				 undec_sm_pwdb);
+			rtl_dbg(rtlpriv, COMP_POWER, DBG_LOUD,
+				"STA Default Port PWDB = 0x%lx\n",
+				undec_sm_pwdb);
 		}
 	} else {
 		undec_sm_pwdb = rtlpriv->dm.entry_min_undec_sm_pwdb;
 
-		RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
-			 "AP Ext Port PWDB = 0x%lx\n",
-			 undec_sm_pwdb);
+		rtl_dbg(rtlpriv, COMP_POWER, DBG_LOUD,
+			"AP Ext Port PWDB = 0x%lx\n",
+			undec_sm_pwdb);
 	}
 
 	txpwr_threshold_lv2 = TX_POWER_NEAR_FIELD_THRESH_LVL2;

drivers/net/wireless/realtek/rtlwifi/rtl8192se/fw.c

@@ -39,8 +39,8 @@ static bool _rtl92s_firmware_enable_cpu(struct ieee80211_hw *hw)
 	do {
 		cpustatus = rtl_read_byte(rtlpriv, TCR);
 		if (cpustatus & IMEM_RDY) {
-			RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
-				 "IMEM Ready after CPU has refilled\n");
+			rtl_dbg(rtlpriv, COMP_INIT, DBG_LOUD,
+				"IMEM Ready after CPU has refilled\n");
 			break;
 		}
 
@@ -195,8 +195,8 @@ static bool _rtl92s_firmware_checkready(struct ieee80211_hw *hw,
 	short pollingcnt = 1000;
 	bool rtstatus = true;
 
-	RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
-		 "LoadStaus(%d)\n", loadfw_status);
+	rtl_dbg(rtlpriv, COMP_INIT, DBG_LOUD,
+		"LoadStaus(%d)\n", loadfw_status);
 
 	firmware->fwstatus = (enum fw_status)loadfw_status;
 
@@ -256,9 +256,9 @@ static bool _rtl92s_firmware_checkready(struct ieee80211_hw *hw,
 			goto status_check_fail;
 		}
 
-		RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
-			 "DMEM code download success, cpustatus(%#x)\n",
-			 cpustatus);
+		rtl_dbg(rtlpriv, COMP_INIT, DBG_LOUD,
+			"DMEM code download success, cpustatus(%#x)\n",
+			cpustatus);
 
 		/* Prevent Delay too much and being scheduled out */
 		/* Polling Load Firmware ready */
@@ -270,9 +270,9 @@ static bool _rtl92s_firmware_checkready(struct ieee80211_hw *hw,
 			udelay(40);
 		} while (pollingcnt--);
 
-		RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
-			 "Polling Load Firmware ready, cpustatus(%x)\n",
-			 cpustatus);
+		rtl_dbg(rtlpriv, COMP_INIT, DBG_LOUD,
+			"Polling Load Firmware ready, cpustatus(%x)\n",
+			cpustatus);
 
 		if (((cpustatus & LOAD_FW_READY) != LOAD_FW_READY) ||
 		    (pollingcnt <= 0)) {
@@ -290,8 +290,8 @@ static bool _rtl92s_firmware_checkready(struct ieee80211_hw *hw,
 		rtl_write_dword(rtlpriv, RCR, (tmpu4b | RCR_APPFCS |
 				RCR_APP_ICV | RCR_APP_MIC));
 
-		RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
-			 "Current RCR settings(%#x)\n", tmpu4b);
+		rtl_dbg(rtlpriv, COMP_INIT, DBG_LOUD,
+			"Current RCR settings(%#x)\n", tmpu4b);
 
 		/* Set to normal mode. */
 		rtl_write_byte(rtlpriv, LBKMD_SEL, LBK_NORMAL);
@@ -304,9 +304,9 @@ static bool _rtl92s_firmware_checkready(struct ieee80211_hw *hw,
 	}
 
 status_check_fail:
-	RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
-		 "loadfw_status(%d), rtstatus(%x)\n",
-		 loadfw_status, rtstatus);
+	rtl_dbg(rtlpriv, COMP_INIT, DBG_LOUD,
+		"loadfw_status(%d), rtstatus(%x)\n",
+		loadfw_status, rtstatus);
 	return rtstatus;
 }
 
@@ -337,11 +337,11 @@ int rtl92s_download_fw(struct ieee80211_hw *hw)
 	firmware->firmwareversion =  byte(pfwheader->version, 0);
 	firmware->pfwheader->fwpriv.hci_sel = 1;/* pcie */
 
-	RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
-		 "signature:%x, version:%x, size:%x, imemsize:%x, sram size:%x\n",
-		 pfwheader->signature,
-		 pfwheader->version, pfwheader->dmem_size,
-		 pfwheader->img_imem_size, pfwheader->img_sram_size);
+	rtl_dbg(rtlpriv, COMP_INIT, DBG_LOUD,
+		"signature:%x, version:%x, size:%x, imemsize:%x, sram size:%x\n",
+		pfwheader->signature,
+		pfwheader->version, pfwheader->dmem_size,
+		pfwheader->img_imem_size, pfwheader->img_sram_size);
 
 	/* 2. Retrieve IMEM image. */
 	if ((pfwheader->img_imem_size == 0) || (pfwheader->img_imem_size >

drivers/net/wireless/realtek/rtlwifi/rtl8192se/led.c

@@ -27,8 +27,8 @@ void rtl92se_sw_led_on(struct ieee80211_hw *hw, struct rtl_led *pled)
 	u8 ledcfg;
 	struct rtl_priv *rtlpriv = rtl_priv(hw);
 
-	RT_TRACE(rtlpriv, COMP_LED, DBG_LOUD, "LedAddr:%X ledpin=%d\n",
-		 LEDCFG, pled->ledpin);
+	rtl_dbg(rtlpriv, COMP_LED, DBG_LOUD, "LedAddr:%X ledpin=%d\n",
+		LEDCFG, pled->ledpin);
 
 	ledcfg = rtl_read_byte(rtlpriv, LEDCFG);
 
@@ -57,8 +57,8 @@ void rtl92se_sw_led_off(struct ieee80211_hw *hw, struct rtl_led *pled)
 	rtlpriv = rtl_priv(hw);
 	if (!rtlpriv || rtlpriv->max_fw_size)
 		return;
-	RT_TRACE(rtlpriv, COMP_LED, DBG_LOUD, "LedAddr:%X ledpin=%d\n",
-		 LEDCFG, pled->ledpin);
+	rtl_dbg(rtlpriv, COMP_LED, DBG_LOUD, "LedAddr:%X ledpin=%d\n",
+		LEDCFG, pled->ledpin);
 
 	ledcfg = rtl_read_byte(rtlpriv, LEDCFG);
 
@@ -119,7 +119,7 @@ void rtl92se_led_control(struct ieee80211_hw *hw, enum led_ctl_mode ledaction)
 	    ledaction == LED_CTL_POWER_ON)) {
 		return;
 	}
-	RT_TRACE(rtlpriv, COMP_LED, DBG_LOUD, "ledaction %d\n", ledaction);
+	rtl_dbg(rtlpriv, COMP_LED, DBG_LOUD, "ledaction %d\n", ledaction);
 
 	_rtl92se_sw_led_control(hw, ledaction);
 }

drivers/net/wireless/realtek/rtlwifi/rtl8192se/rf.c

@@ -95,13 +95,13 @@ static void _rtl92s_get_powerbase(struct ieee80211_hw *hw, u8 *p_pwrlevel,
 	}
 
 	if (rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20_40) {
-		RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
-			 "40MHz finalpwr_idx (A / B) = 0x%x / 0x%x\n",
-			 p_final_pwridx[0], p_final_pwridx[1]);
+		rtl_dbg(rtlpriv, COMP_POWER, DBG_LOUD,
+			"40MHz finalpwr_idx (A / B) = 0x%x / 0x%x\n",
+			p_final_pwridx[0], p_final_pwridx[1]);
 	} else {
-		RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
-			 "20MHz finalpwr_idx (A / B) = 0x%x / 0x%x\n",
-			 p_final_pwridx[0], p_final_pwridx[1]);
+		rtl_dbg(rtlpriv, COMP_POWER, DBG_LOUD,
+			"20MHz finalpwr_idx (A / B) = 0x%x / 0x%x\n",
+			p_final_pwridx[0], p_final_pwridx[1]);
 	}
 }
 
@@ -124,9 +124,9 @@ static void _rtl92s_set_antennadiff(struct ieee80211_hw *hw,
 		if (ant_pwr_diff < -8)
 			ant_pwr_diff = -8;
 
-		RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
-			 "Antenna Diff from RF-B to RF-A = %d (0x%x)\n",
-			 ant_pwr_diff, ant_pwr_diff & 0xf);
+		rtl_dbg(rtlpriv, COMP_POWER, DBG_LOUD,
+			"Antenna Diff from RF-B to RF-A = %d (0x%x)\n",
+			ant_pwr_diff, ant_pwr_diff & 0xf);
 
 		ant_pwr_diff &= 0xf;
 	}
@@ -143,8 +143,8 @@ static void _rtl92s_set_antennadiff(struct ieee80211_hw *hw,
 	rtl_set_bbreg(hw, RFPGA0_TXGAINSTAGE, (BXBTXAGC | BXCTXAGC | BXDTXAGC),
 		      u4reg_val);
 
-	RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD, "Write BCD-Diff(0x%x) = 0x%x\n",
-		 RFPGA0_TXGAINSTAGE, u4reg_val);
+	rtl_dbg(rtlpriv, COMP_POWER, DBG_LOUD, "Write BCD-Diff(0x%x) = 0x%x\n",
+		RFPGA0_TXGAINSTAGE, u4reg_val);
 }
 
 static void _rtl92s_get_txpower_writeval_byregulatory(struct ieee80211_hw *hw,
@@ -169,8 +169,8 @@ static void _rtl92s_get_txpower_writeval_byregulatory(struct ieee80211_hw *hw,
 		writeval = rtlphy->mcs_offset[chnlgroup][index] +
 				((index < 2) ? pwrbase0 : pwrbase1);
 
-		RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
-			 "RTK better performance, writeval = 0x%x\n", writeval);
+		rtl_dbg(rtlpriv, COMP_POWER, DBG_LOUD,
+			"RTK better performance, writeval = 0x%x\n", writeval);
 		break;
 	case 1:
 		/* Realtek regulatory increase power diff defined
@@ -178,9 +178,9 @@ static void _rtl92s_get_txpower_writeval_byregulatory(struct ieee80211_hw *hw,
 		if (rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20_40) {
 			writeval = ((index < 2) ? pwrbase0 : pwrbase1);
 
-			RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
-				 "Realtek regulatory, 40MHz, writeval = 0x%x\n",
-				 writeval);
+			rtl_dbg(rtlpriv, COMP_POWER, DBG_LOUD,
+				"Realtek regulatory, 40MHz, writeval = 0x%x\n",
+				writeval);
 		} else {
 			chnlgroup = 0;
 
@@ -199,16 +199,16 @@ static void _rtl92s_get_txpower_writeval_byregulatory(struct ieee80211_hw *hw,
 					+ ((index < 2) ?
 					pwrbase0 : pwrbase1);
 
-			RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
-				 "Realtek regulatory, 20MHz, writeval = 0x%x\n",
-				 writeval);
+			rtl_dbg(rtlpriv, COMP_POWER, DBG_LOUD,
+				"Realtek regulatory, 20MHz, writeval = 0x%x\n",
+				writeval);
 		}
 		break;
 	case 2:
 		/* Better regulatory don't increase any power diff */
 		writeval = ((index < 2) ? pwrbase0 : pwrbase1);
-		RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
-			 "Better regulatory, writeval = 0x%x\n", writeval);
+		rtl_dbg(rtlpriv, COMP_POWER, DBG_LOUD,
+			"Better regulatory, writeval = 0x%x\n", writeval);
 		break;
 	case 3:
 		/* Customer defined power diff. increase power diff
@@ -216,15 +216,15 @@ static void _rtl92s_get_txpower_writeval_byregulatory(struct ieee80211_hw *hw,
 		chnlgroup = 0;
 
 		if (rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20_40) {
-			RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
-				 "customer's limit, 40MHz = 0x%x\n",
-				 rtlefuse->pwrgroup_ht40
-				 [RF90_PATH_A][chnl - 1]);
+			rtl_dbg(rtlpriv, COMP_POWER, DBG_LOUD,
+				"customer's limit, 40MHz = 0x%x\n",
+				rtlefuse->pwrgroup_ht40
+				[RF90_PATH_A][chnl - 1]);
 		} else {
-			RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
-				 "customer's limit, 20MHz = 0x%x\n",
-				 rtlefuse->pwrgroup_ht20
-				 [RF90_PATH_A][chnl - 1]);
+			rtl_dbg(rtlpriv, COMP_POWER, DBG_LOUD,
+				"customer's limit, 20MHz = 0x%x\n",
+				rtlefuse->pwrgroup_ht20
+				[RF90_PATH_A][chnl - 1]);
 		}
 
 		for (i = 0; i < 4; i++) {
@@ -256,20 +256,20 @@ static void _rtl92s_get_txpower_writeval_byregulatory(struct ieee80211_hw *hw,
 				(pwrdiff_limit[2] << 16) |
 				(pwrdiff_limit[1] << 8) |
 				(pwrdiff_limit[0]);
-		RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
-			 "Customer's limit = 0x%x\n", customer_limit);
+		rtl_dbg(rtlpriv, COMP_POWER, DBG_LOUD,
+			"Customer's limit = 0x%x\n", customer_limit);
 
 		writeval = customer_limit + ((index < 2) ?
 					     pwrbase0 : pwrbase1);
-		RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
-			 "Customer, writeval = 0x%x\n", writeval);
+		rtl_dbg(rtlpriv, COMP_POWER, DBG_LOUD,
+			"Customer, writeval = 0x%x\n", writeval);
 		break;
 	default:
 		chnlgroup = 0;
 		writeval = rtlphy->mcs_offset[chnlgroup][index] +
 				((index < 2) ? pwrbase0 : pwrbase1);
-		RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
-			 "RTK better performance, writeval = 0x%x\n", writeval);
+		rtl_dbg(rtlpriv, COMP_POWER, DBG_LOUD,
+			"RTK better performance, writeval = 0x%x\n", writeval);
 		break;
 	}
 

drivers/net/wireless/realtek/rtlwifi/rtl8192se/sw.c

@@ -65,8 +65,8 @@ static void rtl92se_fw_cb(const struct firmware *firmware, void *context)
 	struct rt_firmware *pfirmware = NULL;
 	char *fw_name = "rtlwifi/rtl8192sefw.bin";
 
-	RT_TRACE(rtlpriv, COMP_ERR, DBG_LOUD,
-			 "Firmware callback routine entered!\n");
+	rtl_dbg(rtlpriv, COMP_ERR, DBG_LOUD,
+		"Firmware callback routine entered!\n");
 	complete(&rtlpriv->firmware_loading_complete);
 	if (!firmware) {
 		pr_err("Firmware %s not available\n", fw_name);

drivers/net/wireless/realtek/rtlwifi/rtl8192se/trx.c

@@ -333,8 +333,8 @@ void rtl92se_tx_fill_desc(struct ieee80211_hw *hw,
 	u8 bw_40 = 0;
 
 	if (pci_dma_mapping_error(rtlpci->pdev, mapping)) {
-		RT_TRACE(rtlpriv, COMP_SEND, DBG_TRACE,
-			 "DMA mapping error\n");
+		rtl_dbg(rtlpriv, COMP_SEND, DBG_TRACE,
+			"DMA mapping error\n");
 		return;
 	}
 	if (mac->opmode == NL80211_IFTYPE_STATION) {
@@ -488,7 +488,7 @@ void rtl92se_tx_fill_desc(struct ieee80211_hw *hw,
 	/* DOWRD 8 */
 	set_tx_desc_tx_buffer_address(pdesc, mapping);
 
-	RT_TRACE(rtlpriv, COMP_SEND, DBG_TRACE, "\n");
+	rtl_dbg(rtlpriv, COMP_SEND, DBG_TRACE, "\n");
 }
 
 void rtl92se_tx_fill_cmddesc(struct ieee80211_hw *hw, u8 *pdesc8,
@@ -504,8 +504,8 @@ void rtl92se_tx_fill_cmddesc(struct ieee80211_hw *hw, u8 *pdesc8,
 			PCI_DMA_TODEVICE);
 
 	if (pci_dma_mapping_error(rtlpci->pdev, mapping)) {
-		RT_TRACE(rtlpriv, COMP_SEND, DBG_TRACE,
-			 "DMA mapping error\n");
+		rtl_dbg(rtlpriv, COMP_SEND, DBG_TRACE,
+			"DMA mapping error\n");
 		return;
 	}
 	/* Clear all status	*/