Commit fce5430f authored by John Stultz's avatar John Stultz Committed by Sebastian Reichel

reset: qcom-pon: Add support for gen2 pon

Add support for gen2 pon register so "reboot bootloader" can
work on pixel3 and db845.

Cc: Andy Gross <agross@kernel.org>
Cc: David Brown <david.brown@linaro.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Amit Pundir <amit.pundir@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: devicetree@vger.kernel.org
Reviewed-by: default avatarBjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: default avatarJohn Stultz <john.stultz@linaro.org>

v2:
* Split out dts changes into separate path
* Minor cleanups and remove unused variables
Signed-off-by: default avatarSebastian Reichel <sebastian.reichel@collabora.com>
parent 9faf9296
......@@ -14,11 +14,15 @@
#define PON_SOFT_RB_SPARE 0x8f
#define GEN1_REASON_SHIFT 2
#define GEN2_REASON_SHIFT 1
struct pm8916_pon {
struct device *dev;
struct regmap *regmap;
u32 baseaddr;
struct reboot_mode_driver reboot_mode;
long reason_shift;
};
static int pm8916_reboot_mode_write(struct reboot_mode_driver *reboot,
......@@ -30,7 +34,7 @@ static int pm8916_reboot_mode_write(struct reboot_mode_driver *reboot,
ret = regmap_update_bits(pon->regmap,
pon->baseaddr + PON_SOFT_RB_SPARE,
0xfc, magic << 2);
0xfc, magic << pon->reason_shift);
if (ret < 0)
dev_err(pon->dev, "update reboot mode bits failed\n");
......@@ -60,6 +64,7 @@ static int pm8916_pon_probe(struct platform_device *pdev)
return error;
pon->reboot_mode.dev = &pdev->dev;
pon->reason_shift = (long)of_device_get_match_data(&pdev->dev);
pon->reboot_mode.write = pm8916_reboot_mode_write;
error = devm_reboot_mode_register(&pdev->dev, &pon->reboot_mode);
if (error) {
......@@ -73,8 +78,9 @@ static int pm8916_pon_probe(struct platform_device *pdev)
}
static const struct of_device_id pm8916_pon_id_table[] = {
{ .compatible = "qcom,pm8916-pon" },
{ .compatible = "qcom,pms405-pon" },
{ .compatible = "qcom,pm8916-pon", .data = (void *)GEN1_REASON_SHIFT },
{ .compatible = "qcom,pms405-pon", .data = (void *)GEN1_REASON_SHIFT },
{ .compatible = "qcom,pm8998-pon", .data = (void *)GEN2_REASON_SHIFT },
{ }
};
MODULE_DEVICE_TABLE(of, pm8916_pon_id_table);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment