ARM: dts: am335x: switch to use phy-gmii-sel

Switch to use phy-gmii-sel PHY instead of cpsw-phy-sel.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

arch/arm/boot/dts/am335x-baltos-ir2110.dts

@@ -72,7 +72,3 @@ &cpsw_emac1 {
 	dual_emac_res_vlan = <2>;
 	phy-handle = <&phy1>;
 };
-
-&phy_sel {
-	rmii-clock-ext = <1>;
-};

arch/arm/boot/dts/am335x-baltos-ir3220.dts

@@ -114,7 +114,3 @@ &cpsw_emac1 {
 	dual_emac_res_vlan = <2>;
 	phy-handle = <&phy1>;
 };
-
-&phy_sel {
-	rmii-clock-ext = <1>;
-};

arch/arm/boot/dts/am335x-baltos-ir5221.dts

@@ -133,10 +133,6 @@ &cpsw_emac1 {
 	phy-handle = <&phy1>;
 };
 
-&phy_sel {
-	rmii-clock-ext = <1>;
-};
-
 &dcan1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&dcan1_pins>;

arch/arm/boot/dts/am335x-chiliboard.dts

@@ -155,10 +155,6 @@ &cpsw_emac0 {
 	phy-mode = "rmii";
 };
 
-&phy_sel {
-	rmii-clock-ext;
-};
-
 /* USB */
 &usb {
 	status = "okay";

arch/arm/boot/dts/am335x-icev2.dts

@@ -484,10 +484,6 @@ &mac {
 	dual_emac;
 };
 
-&phy_sel {
-	rmii-clock-ext;
-};
-
 &davinci_mdio {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&davinci_mdio_default>;

arch/arm/boot/dts/am335x-igep0033.dtsi

@@ -123,10 +123,6 @@ &cpsw_emac1 {
 	phy-mode = "rmii";
 };
 
-&phy_sel {
-	rmii-clock-ext;
-};
-
 &elm {
 	status = "okay";
 };

arch/arm/boot/dts/am335x-lxm.dts

@@ -328,10 +328,6 @@ &cpsw_emac1 {
 	dual_emac_res_vlan = <3>;
 };
 
-&phy_sel {
-	rmii-clock-ext;
-};
-
 &mac {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&cpsw_default>;

arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi

@@ -159,11 +159,6 @@ &cpsw_emac1 {
 	status = "okay";
 };
 
-&phy_sel {
-	reg= <0x44e10650 0xf5>;
-	rmii-clock-ext;
-};
-
 &sham {
 	status = "okay";
 };

arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts

@@ -446,11 +446,6 @@ &cpsw_emac1 {
 	dual_emac_res_vlan = <2>;
 };
 
-&phy_sel {
-	reg= <0x44e10650 0xf5>;
-	rmii-clock-ext;
-};
-
 &sham {
 	status = "okay";
 };

arch/arm/boot/dts/am335x-phycore-som.dtsi

@@ -100,10 +100,6 @@ &mac {
 	status = "okay";
 };
 
-&phy_sel {
-	rmii-clock-ext;
-};
-
 /* I2C Busses */
 &am33xx_pinmux {
 	i2c0_pins: pinmux_i2c0 {

arch/arm/boot/dts/am33xx-l4.dtsi

@@ -279,12 +279,6 @@ scm: scm@0 {
 				#pinctrl-cells = <1>;
 				ranges = <0 0 0x2000>;
 
-				phy_sel: cpsw-phy-sel@650 {
-					compatible = "ti,am3352-cpsw-phy-sel";
-					reg= <0x650 0x4>;
-					reg-names = "gmii-sel";
-				};
-
 				am33xx_pinmux: pinmux@800 {
 					compatible = "pinctrl-single";
 					reg = <0x800 0x238>;
@@ -300,6 +294,12 @@ scm_conf: scm_conf@0 {
 					#size-cells = <1>;
 					ranges = <0 0 0x800>;
 
+					phy_gmii_sel: phy-gmii-sel {
+						compatible = "ti,am3352-phy-gmii-sel";
+						reg = <0x650 0x4>;
+						#phy-cells = <2>;
+					};
+
 					scm_clocks: clocks {
 						#address-cells = <1>;
 						#size-cells = <0>;
@@ -715,7 +715,6 @@ mac: ethernet@0 {
 				interrupts = <40 41 42 43>;
 				ranges = <0 0 0x8000>;
 				syscon = <&scm_conf>;
-				cpsw-phy-sel = <&phy_sel>;
 				status = "disabled";
 
 				davinci_mdio: mdio@1000 {
@@ -731,11 +730,13 @@ davinci_mdio: mdio@1000 {
 				cpsw_emac0: slave@200 {
 					/* Filled in by U-Boot */
 					mac-address = [ 00 00 00 00 00 00 ];
+					phys = <&phy_gmii_sel 1 1>;
 				};
 
 				cpsw_emac1: slave@300 {
 					/* Filled in by U-Boot */
 					mac-address = [ 00 00 00 00 00 00 ];
+					phys = <&phy_gmii_sel 2 1>;
 				};
 			};
 		};