Commit fd0053c9 authored by Arnd Bergmann's avatar Arnd Bergmann Committed by Linus Walleij

ARM: realview: remove sparsemem hack

The realview-pbx platform has an elaborate way of avoiding the use of highmem
by redefining its phys_to_virt function. In practice this doesn't help all
that much, and it gets in the way of doing multiplatform builds for
realview.

This removes the feature and kills off the mach/memory.h file for realview.
We also lose the ability to do sparsemem with this patch, but that should
be put back into place for generic multiplatform configurations, to save
a little memory on PBX.
Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent 8005c49d
......@@ -239,7 +239,6 @@ config ARM_PATCH_PHYS_VIRT
bool "Patch physical to virtual translations at runtime" if EMBEDDED
default y
depends on !XIP_KERNEL && MMU
depends on !ARCH_REALVIEW || !SPARSEMEM
help
Patch phys-to-virt and virt-to-phys translation functions at
boot and module load time according to the position of the
......@@ -354,7 +353,6 @@ config ARCH_REALVIEW
select GENERIC_CLOCKEVENTS
select GPIO_PL061 if GPIOLIB
select ICST
select NEED_MACH_MEMORY_H
select PLAT_VERSATILE
select PLAT_VERSATILE_SCHED_CLOCK
help
......
......@@ -102,14 +102,13 @@ config MACH_REALVIEW_PBA8
config MACH_REALVIEW_PBX
bool "Support RealView(R) Platform Baseboard Explore"
select ARCH_SPARSEMEM_ENABLE if CPU_V7 && !REALVIEW_HIGH_PHYS_OFFSET
select ARM_GIC
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
select HAVE_PATA_PLATFORM
select HAVE_SMP
select MIGHT_HAVE_CACHE_L2X0
select ZONE_DMA if SPARSEMEM
select ZONE_DMA
help
Include support for the ARM(R) RealView(R) Platform Baseboard
Explore.
......@@ -124,6 +123,6 @@ config REALVIEW_HIGH_PHYS_OFFSET
the board supports 512MB of RAM, this option allows the
memory to be accessed contiguously at the high physical
offset. On the PBX board, disabling this option allows 1GB of
RAM to be used with SPARSEMEM.
RAM to be used with HIGHMEM.
endmenu
/*
* arch/arm/mach-realview/include/mach/memory.h
*
* Copyright (C) 2003 ARM Limited
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
#ifdef CONFIG_SPARSEMEM
/*
* Sparsemem definitions for RealView PBX.
*
* The RealView PBX board has another block of 512MB of RAM at 0x20000000,
* however only the block at 0x70000000 (or the 256MB mirror at 0x00000000)
* may be used for DMA.
*
* The macros below define a section size of 256MB and a non-linear virtual to
* physical mapping:
*
* 256MB @ 0x00000000 -> PAGE_OFFSET
* 512MB @ 0x20000000 -> PAGE_OFFSET + 0x10000000
* 256MB @ 0x80000000 -> PAGE_OFFSET + 0x30000000
*/
#ifdef CONFIG_REALVIEW_HIGH_PHYS_OFFSET
#error "SPARSEMEM not available with REALVIEW_HIGH_PHYS_OFFSET"
#endif
#define MAX_PHYSMEM_BITS 32
#define SECTION_SIZE_BITS 28
/* bank page offsets */
#define PAGE_OFFSET1 (PAGE_OFFSET + 0x10000000)
#define PAGE_OFFSET2 (PAGE_OFFSET + 0x30000000)
#define PHYS_OFFSET PLAT_PHYS_OFFSET
#define __phys_to_virt(phys) \
((phys) >= 0x80000000 ? (phys) - 0x80000000 + PAGE_OFFSET2 : \
(phys) >= 0x20000000 ? (phys) - 0x20000000 + PAGE_OFFSET1 : \
(phys) + PAGE_OFFSET)
#define __virt_to_phys(virt) \
((virt) >= PAGE_OFFSET2 ? (virt) - PAGE_OFFSET2 + 0x80000000 : \
(virt) >= PAGE_OFFSET1 ? (virt) - PAGE_OFFSET1 + 0x20000000 : \
(virt) - PAGE_OFFSET)
#endif /* CONFIG_SPARSEMEM */
#endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment