Merge branches 'core-objtool-for-linus', 'x86-cleanups-for-linus' and...

Merge branches 'core-objtool-for-linus', 'x86-cleanups-for-linus' and 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 objtool, cleanup, and apic updates from Ingo Molnar:
 "Objtool:

   - Fix a gawk 5.0 incompatibility in gen-insn-attr-x86.awk. Most
     distros are still on gawk 4.2.x.

  Cleanup:

   - Misc cleanups, plus the removal of obsolete code such as Calgary
     IOMMU support, which code hasn't seen any real testing in a long
     time and there's no known users left.

  apic:

   - Two changes: a cleanup and a fix for an (old) race for oneshot
     threaded IRQ handlers"

* 'core-objtool-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/insn: Fix awk regexp warnings

* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Remove unused asm/rio.h
  x86: Fix typos in comments
  x86/pci: Remove #ifdef __KERNEL__ guard from <asm/pci.h>
  x86/pci: Remove pci_64.h
  x86: Remove the calgary IOMMU driver
  x86/apic, x86/uprobes: Correct parameter names in kernel-doc comments
  x86/kdump: Remove the unused crash_copy_backup_region()
  x86/nmi: Remove stale EDAC include leftover

* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/ioapic: Rename misnamed functions
  x86/ioapic: Prevent inconsistent state when moving an interrupt

MAINTAINERS

@@ -3649,16 +3649,6 @@ L:	cake@lists.bufferbloat.net (moderated for non-subscribers)
 S:	Maintained
 F:	net/sched/sch_cake.c
 
-CALGARY x86-64 IOMMU
-M:	Muli Ben-Yehuda <mulix@mulix.org>
-M:	Jon Mason <jdmason@kudzu.us>
-L:	iommu@lists.linux-foundation.org
-S:	Maintained
-F:	arch/x86/kernel/pci-calgary_64.c
-F:	arch/x86/kernel/tce_64.c
-F:	arch/x86/include/asm/calgary.h
-F:	arch/x86/include/asm/tce.h
-
 CAN NETWORK DRIVERS
 M:	Wolfgang Grandegger <wg@grandegger.com>
 M:	Marc Kleine-Budde <mkl@pengutronix.de>

arch/x86/Kconfig

@@ -932,36 +932,6 @@ config GART_IOMMU
 
 	  If unsure, say Y.
 
-config CALGARY_IOMMU
-	bool "IBM Calgary IOMMU support"
-	select IOMMU_HELPER
-	select SWIOTLB
-	depends on X86_64 && PCI
-	---help---
-	  Support for hardware IOMMUs in IBM's xSeries x366 and x460
-	  systems. Needed to run systems with more than 3GB of memory
-	  properly with 32-bit PCI devices that do not support DAC
-	  (Double Address Cycle). Calgary also supports bus level
-	  isolation, where all DMAs pass through the IOMMU.  This
-	  prevents them from going anywhere except their intended
-	  destination. This catches hard-to-find kernel bugs and
-	  mis-behaving drivers and devices that do not use the DMA-API
-	  properly to set up their DMA buffers.  The IOMMU can be
-	  turned off at boot time with the iommu=off parameter.
-	  Normally the kernel will make the right choice by itself.
-	  If unsure, say Y.
-
-config CALGARY_IOMMU_ENABLED_BY_DEFAULT
-	def_bool y
-	prompt "Should Calgary be enabled by default?"
-	depends on CALGARY_IOMMU
-	---help---
-	  Should Calgary be enabled by default? if you choose 'y', Calgary
-	  will be used (if it exists). If you choose 'n', Calgary will not be
-	  used even if it exists. If you choose 'n' and would like to use
-	  Calgary anyway, pass 'iommu=calgary' on the kernel command line.
-	  If unsure, say Y.
-
 config MAXSMP
 	bool "Enable Maximum number of SMP Processors and NUMA Nodes"
 	depends on X86_64 && SMP && DEBUG_KERNEL

arch/x86/configs/x86_64_defconfig

@@ -25,7 +25,6 @@ CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_SMP=y
-CONFIG_CALGARY_IOMMU=y
 CONFIG_NR_CPUS=64
 CONFIG_SCHED_SMT=y
 CONFIG_PREEMPT_VOLUNTARY=y

arch/x86/include/asm/calgary.h

-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Derived from include/asm-powerpc/iommu.h
- *
- * Copyright IBM Corporation, 2006-2007
- *
- * Author: Jon Mason <jdmason@us.ibm.com>
- * Author: Muli Ben-Yehuda <muli@il.ibm.com>
- */
-
-#ifndef _ASM_X86_CALGARY_H
-#define _ASM_X86_CALGARY_H
-
-#include <linux/spinlock.h>
-#include <linux/device.h>
-#include <linux/dma-mapping.h>
-#include <linux/timer.h>
-#include <asm/types.h>
-
-struct iommu_table {
-	const struct cal_chipset_ops *chip_ops; /* chipset specific funcs */
-	unsigned long  it_base;      /* mapped address of tce table */
-	unsigned long  it_hint;      /* Hint for next alloc */
-	unsigned long *it_map;       /* A simple allocation bitmap for now */
-	void __iomem  *bbar;         /* Bridge BAR */
-	u64	       tar_val;      /* Table Address Register */
-	struct timer_list watchdog_timer;
-	spinlock_t     it_lock;      /* Protects it_map */
-	unsigned int   it_size;      /* Size of iommu table in entries */
-	unsigned char  it_busno;     /* Bus number this table belongs to */
-};
-
-struct cal_chipset_ops {
-	void (*handle_quirks)(struct iommu_table *tbl, struct pci_dev *dev);
-	void (*tce_cache_blast)(struct iommu_table *tbl);
-	void (*dump_error_regs)(struct iommu_table *tbl);
-};
-
-#define TCE_TABLE_SIZE_UNSPECIFIED	~0
-#define TCE_TABLE_SIZE_64K		0
-#define TCE_TABLE_SIZE_128K		1
-#define TCE_TABLE_SIZE_256K		2
-#define TCE_TABLE_SIZE_512K		3
-#define TCE_TABLE_SIZE_1M		4
-#define TCE_TABLE_SIZE_2M		5
-#define TCE_TABLE_SIZE_4M		6
-#define TCE_TABLE_SIZE_8M		7
-
-extern int use_calgary;
-
-#ifdef CONFIG_CALGARY_IOMMU
-extern int detect_calgary(void);
-#else
-static inline int detect_calgary(void) { return -ENODEV; }
-#endif
-
-#endif /* _ASM_X86_CALGARY_H */

arch/x86/include/asm/crash.h

@@ -3,7 +3,6 @@
 #define _ASM_X86_CRASH_H
 
 int crash_load_segments(struct kimage *image);
-int crash_copy_backup_region(struct kimage *image);
 int crash_setup_memmap_entries(struct kimage *image,
 		struct boot_params *params);
 void crash_smp_send_stop(void);

arch/x86/include/asm/pci.h

@@ -12,8 +12,6 @@
 #include <asm/pat.h>
 #include <asm/x86_init.h>
 
-#ifdef __KERNEL__
-
 struct pci_sysdata {
 	int		domain;		/* PCI domain */
 	int		node;		/* NUMA node */
@@ -118,11 +116,6 @@ void native_restore_msi_irqs(struct pci_dev *dev);
 #define native_setup_msi_irqs		NULL
 #define native_teardown_msi_irq		NULL
 #endif
-#endif  /* __KERNEL__ */
-
-#ifdef CONFIG_X86_64
-#include <asm/pci_64.h>
-#endif
 
 /* generic pci stuff */
 #include <asm-generic/pci.h>

arch/x86/include/asm/pci_64.h

-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _ASM_X86_PCI_64_H
-#define _ASM_X86_PCI_64_H
-
-#ifdef __KERNEL__
-
-#ifdef CONFIG_CALGARY_IOMMU
-static inline void *pci_iommu(struct pci_bus *bus)
-{
-	struct pci_sysdata *sd = bus->sysdata;
-	return sd->iommu;
-}
-
-static inline void set_pci_iommu(struct pci_bus *bus, void *val)
-{
-	struct pci_sysdata *sd = bus->sysdata;
-	sd->iommu = val;
-}
-#endif /* CONFIG_CALGARY_IOMMU */
-
-extern int (*pci_config_read)(int seg, int bus, int dev, int fn,
-			      int reg, int len, u32 *value);
-extern int (*pci_config_write)(int seg, int bus, int dev, int fn,
-			       int reg, int len, u32 value);
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_X86_PCI_64_H */

arch/x86/include/asm/rio.h

-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Derived from include/asm-x86/mach-summit/mach_mpparse.h
- *          and include/asm-x86/mach-default/bios_ebda.h
- *
- * Author: Laurent Vivier <Laurent.Vivier@bull.net>
- */
-
-#ifndef _ASM_X86_RIO_H
-#define _ASM_X86_RIO_H
-
-#define RIO_TABLE_VERSION	3
-
-struct rio_table_hdr {
-	u8 version;		/* Version number of this data structure  */
-	u8 num_scal_dev;	/* # of Scalability devices               */
-	u8 num_rio_dev;		/* # of RIO I/O devices                   */
-} __attribute__((packed));
-
-struct scal_detail {
-	u8 node_id;		/* Scalability Node ID                    */
-	u32 CBAR;		/* Address of 1MB register space          */
-	u8 port0node;		/* Node ID port connected to: 0xFF=None   */
-	u8 port0port;		/* Port num port connected to: 0,1,2, or  */
-				/* 0xFF=None                              */
-	u8 port1node;		/* Node ID port connected to: 0xFF = None */
-	u8 port1port;		/* Port num port connected to: 0,1,2, or  */
-				/* 0xFF=None                              */
-	u8 port2node;		/* Node ID port connected to: 0xFF = None */
-	u8 port2port;		/* Port num port connected to: 0,1,2, or  */
-				/* 0xFF=None                              */
-	u8 chassis_num;		/* 1 based Chassis number (1 = boot node) */
-} __attribute__((packed));
-
-struct rio_detail {
-	u8 node_id;		/* RIO Node ID                            */
-	u32 BBAR;		/* Address of 1MB register space          */
-	u8 type;		/* Type of device                         */
-	u8 owner_id;		/* Node ID of Hurricane that owns this    */
-				/* node                                   */
-	u8 port0node;		/* Node ID port connected to: 0xFF=None   */
-	u8 port0port;		/* Port num port connected to: 0,1,2, or  */
-				/* 0xFF=None                              */
-	u8 port1node;		/* Node ID port connected to: 0xFF=None   */
-	u8 port1port;		/* Port num port connected to: 0,1,2, or  */
-				/* 0xFF=None                              */
-	u8 first_slot;		/* Lowest slot number below this Calgary  */
-	u8 status;		/* Bit 0 = 1 : the XAPIC is used          */
-				/*       = 0 : the XAPIC is not used, ie: */
-				/*            ints fwded to another XAPIC */
-				/*           Bits1:7 Reserved             */
-	u8 WP_index;		/* instance index - lower ones have       */
-				/*     lower slot numbers/PCI bus numbers */
-	u8 chassis_num;		/* 1 based Chassis number                 */
-} __attribute__((packed));
-
-enum {
-	HURR_SCALABILTY	= 0,	/* Hurricane Scalability info */
-	HURR_RIOIB	= 2,	/* Hurricane RIOIB info       */
-	COMPAT_CALGARY	= 4,	/* Compatibility Calgary      */
-	ALT_CALGARY	= 5,	/* Second Planar Calgary      */
-};
-
-#endif /* _ASM_X86_RIO_H */

arch/x86/include/asm/tce.h

-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * This file is derived from asm-powerpc/tce.h.
- *
- * Copyright (C) IBM Corporation, 2006
- *
- * Author: Muli Ben-Yehuda <muli@il.ibm.com>
- * Author: Jon Mason <jdmason@us.ibm.com>
- */
-
-#ifndef _ASM_X86_TCE_H
-#define _ASM_X86_TCE_H
-
-extern unsigned int specified_table_size;
-struct iommu_table;
-
-#define TCE_ENTRY_SIZE   8   /* in bytes */
-
-#define TCE_READ_SHIFT   0
-#define TCE_WRITE_SHIFT  1
-#define TCE_HUBID_SHIFT  2   /* unused */
-#define TCE_RSVD_SHIFT   8   /* unused */
-#define TCE_RPN_SHIFT    12
-#define TCE_UNUSED_SHIFT 48  /* unused */
-
-#define TCE_RPN_MASK     0x0000fffffffff000ULL
-
-extern void tce_build(struct iommu_table *tbl, unsigned long index,
-		      unsigned int npages, unsigned long uaddr, int direction);
-extern void tce_free(struct iommu_table *tbl, long index, unsigned int npages);
-extern void * __init alloc_tce_table(void);
-extern void __init free_tce_table(void *tbl);
-extern int __init build_tce_table(struct pci_dev *dev, void __iomem *bbar);
-
-#endif /* _ASM_X86_TCE_H */

arch/x86/kernel/Makefile

@@ -146,7 +146,6 @@ ifeq ($(CONFIG_X86_64),y)
 	obj-$(CONFIG_AUDIT)		+= audit_64.o
 
 	obj-$(CONFIG_GART_IOMMU)	+= amd_gart_64.o aperture_64.o
-	obj-$(CONFIG_CALGARY_IOMMU)	+= pci-calgary_64.o tce_64.o
 
 	obj-$(CONFIG_MMCONF_FAM10H)	+= mmconf-fam10h_64.o
 	obj-y				+= vsmp_64.o

arch/x86/kernel/apic/apic.c

@@ -2337,7 +2337,7 @@ static int cpuid_to_apicid[] = {
 #ifdef CONFIG_SMP
 /**
  * apic_id_is_primary_thread - Check whether APIC ID belongs to a primary thread
- * @id:	APIC ID to check
+ * @apicid: APIC ID to check
  */
 bool apic_id_is_primary_thread(unsigned int apicid)
 {

arch/x86/kernel/apic/io_apic.c

@@ -1725,19 +1725,20 @@ static bool io_apic_level_ack_pending(struct mp_chip_data *data)
 	return false;
 }
 
-static inline bool ioapic_irqd_mask(struct irq_data *data)
+static inline bool ioapic_prepare_move(struct irq_data *data)
 {
-	/* If we are moving the irq we need to mask it */
+	/* If we are moving the IRQ we need to mask it */
 	if (unlikely(irqd_is_setaffinity_pending(data))) {
-		mask_ioapic_irq(data);
+		if (!irqd_irq_masked(data))
+			mask_ioapic_irq(data);
 		return true;
 	}
 	return false;
 }
 
-static inline void ioapic_irqd_unmask(struct irq_data *data, bool masked)
+static inline void ioapic_finish_move(struct irq_data *data, bool moveit)
 {
-	if (unlikely(masked)) {
+	if (unlikely(moveit)) {
 		/* Only migrate the irq if the ack has been received.
 		 *
 		 * On rare occasions the broadcast level triggered ack gets
@@ -1766,15 +1767,17 @@ static inline void ioapic_irqd_unmask(struct irq_data *data, bool masked)
 		 */
 		if (!io_apic_level_ack_pending(data->chip_data))
 			irq_move_masked_irq(data);
-		unmask_ioapic_irq(data);
+		/* If the IRQ is masked in the core, leave it: */
+		if (!irqd_irq_masked(data))
+			unmask_ioapic_irq(data);
 	}
 }
 #else
-static inline bool ioapic_irqd_mask(struct irq_data *data)
+static inline bool ioapic_prepare_move(struct irq_data *data)
 {
 	return false;
 }
-static inline void ioapic_irqd_unmask(struct irq_data *data, bool masked)
+static inline void ioapic_finish_move(struct irq_data *data, bool moveit)
 {
 }
 #endif
@@ -1783,11 +1786,11 @@ static void ioapic_ack_level(struct irq_data *irq_data)
 {
 	struct irq_cfg *cfg = irqd_cfg(irq_data);
 	unsigned long v;
-	bool masked;
+	bool moveit;
 	int i;
 
 	irq_complete_move(cfg);
-	masked = ioapic_irqd_mask(irq_data);
+	moveit = ioapic_prepare_move(irq_data);
 
 	/*
 	 * It appears there is an erratum which affects at least version 0x11
@@ -1842,7 +1845,7 @@ static void ioapic_ack_level(struct irq_data *irq_data)
 		eoi_ioapic_pin(cfg->vector, irq_data->chip_data);
 	}
 
-	ioapic_irqd_unmask(irq_data, masked);
+	ioapic_finish_move(irq_data, moveit);
 }
 
 static void ioapic_ir_ack_level(struct irq_data *irq_data)

arch/x86/kernel/pci-dma.c

@@ -12,7 +12,6 @@
 #include <asm/dma.h>
 #include <asm/iommu.h>
 #include <asm/gart.h>
-#include <asm/calgary.h>
 #include <asm/x86_init.h>
 #include <asm/iommu_table.h>
 
@@ -112,11 +111,6 @@ static __init int iommu_setup(char *p)
 
 		gart_parse_options(p);
 
-#ifdef CONFIG_CALGARY_IOMMU
-		if (!strncmp(p, "calgary", 7))
-			use_calgary = 1;
-#endif /* CONFIG_CALGARY_IOMMU */
-
 		p += strcspn(p, ",");
 		if (*p == ',')
 			++p;

arch/x86/kernel/setup.c

@@ -459,7 +459,7 @@ static void __init memblock_x86_reserve_range_setup_data(void)
  * due to mapping restrictions.
  *
  * On 64bit, kdump kernel need be restricted to be under 64TB, which is
- * the upper limit of system RAM in 4-level paing mode. Since the kdump
+ * the upper limit of system RAM in 4-level paging mode. Since the kdump
  * jumping could be from 5-level to 4-level, the jumping will fail if
  * kernel is put above 64TB, and there's no way to detect the paging mode
  * of the kernel which will be loaded for dumping during the 1st kernel
@@ -743,8 +743,8 @@ static void __init trim_bios_range(void)
 	e820__range_update(0, PAGE_SIZE, E820_TYPE_RAM, E820_TYPE_RESERVED);
 
 	/*
-	 * special case: Some BIOSen report the PC BIOS
-	 * area (640->1Mb) as ram even though it is not.
+	 * special case: Some BIOSes report the PC BIOS
+	 * area (640Kb -> 1Mb) as RAM even though it is not.
 	 * take them out.
 	 */
 	e820__range_remove(BIOS_BEGIN, BIOS_END - BIOS_BEGIN, E820_TYPE_RAM, 1);

arch/x86/kernel/tce_64.c

-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * This file manages the translation entries for the IBM Calgary IOMMU.
- *
- * Derived from arch/powerpc/platforms/pseries/iommu.c
- *
- * Copyright (C) IBM Corporation, 2006
- *
- * Author: Jon Mason <jdmason@us.ibm.com>
- * Author: Muli Ben-Yehuda <muli@il.ibm.com>
- */
-
-#include <linux/types.h>
-#include <linux/slab.h>
-#include <linux/mm.h>
-#include <linux/spinlock.h>
-#include <linux/string.h>
-#include <linux/pci.h>
-#include <linux/dma-mapping.h>
-#include <linux/memblock.h>
-#include <asm/tce.h>
-#include <asm/calgary.h>
-#include <asm/proto.h>
-#include <asm/cacheflush.h>
-
-/* flush a tce at 'tceaddr' to main memory */
-static inline void flush_tce(void* tceaddr)
-{
-	/* a single tce can't cross a cache line */
-	if (boot_cpu_has(X86_FEATURE_CLFLUSH))
-		clflush(tceaddr);
-	else
-		wbinvd();
-}
-
-void tce_build(struct iommu_table *tbl, unsigned long index,
-	unsigned int npages, unsigned long uaddr, int direction)
-{
-	u64* tp;
-	u64 t;
-	u64 rpn;
-
-	t = (1 << TCE_READ_SHIFT);
-	if (direction != DMA_TO_DEVICE)
-		t |= (1 << TCE_WRITE_SHIFT);
-
-	tp = ((u64*)tbl->it_base) + index;
-
-	while (npages--) {
-		rpn = (virt_to_bus((void*)uaddr)) >> PAGE_SHIFT;
-		t &= ~TCE_RPN_MASK;
-		t |= (rpn << TCE_RPN_SHIFT);
-
-		*tp = cpu_to_be64(t);
-		flush_tce(tp);
-
-		uaddr += PAGE_SIZE;
-		tp++;
-	}
-}
-
-void tce_free(struct iommu_table *tbl, long index, unsigned int npages)
-{
-	u64* tp;
-
-	tp  = ((u64*)tbl->it_base) + index;
-
-	while (npages--) {
-		*tp = cpu_to_be64(0);
-		flush_tce(tp);
-		tp++;
-	}
-}
-
-static inline unsigned int table_size_to_number_of_entries(unsigned char size)
-{
-	/*
-	 * size is the order of the table, 0-7
-	 * smallest table is 8K entries, so shift result by 13 to
-	 * multiply by 8K
-	 */
-	return (1 << size) << 13;
-}
-
-static int tce_table_setparms(struct pci_dev *dev, struct iommu_table *tbl)
-{
-	unsigned int bitmapsz;
-	unsigned long bmppages;
-	int ret;
-
-	tbl->it_busno = dev->bus->number;
-
-	/* set the tce table size - measured in entries */
-	tbl->it_size = table_size_to_number_of_entries(specified_table_size);
-
-	/*
-	 * number of bytes needed for the bitmap size in number of
-	 * entries; we need one bit per entry
-	 */
-	bitmapsz = tbl->it_size / BITS_PER_BYTE;
-	bmppages = __get_free_pages(GFP_KERNEL, get_order(bitmapsz));
-	if (!bmppages) {
-		printk(KERN_ERR "Calgary: cannot allocate bitmap\n");
-		ret = -ENOMEM;
-		goto done;
-	}
-
-	tbl->it_map = (unsigned long*)bmppages;
-
-	memset(tbl->it_map, 0, bitmapsz);
-
-	tbl->it_hint = 0;
-
-	spin_lock_init(&tbl->it_lock);
-
-	return 0;
-
-done:
-	return ret;
-}
-
-int __init build_tce_table(struct pci_dev *dev, void __iomem *bbar)
-{
-	struct iommu_table *tbl;
-	int ret;
-
-	if (pci_iommu(dev->bus)) {
-		printk(KERN_ERR "Calgary: dev %p has sysdata->iommu %p\n",
-		       dev, pci_iommu(dev->bus));
-		BUG();
-	}
-
-	tbl = kzalloc(sizeof(struct iommu_table), GFP_KERNEL);
-	if (!tbl) {
-		printk(KERN_ERR "Calgary: error allocating iommu_table\n");
-		ret = -ENOMEM;
-		goto done;
-	}
-
-	ret = tce_table_setparms(dev, tbl);
-	if (ret)
-		goto free_tbl;
-
-	tbl->bbar = bbar;
-
-	set_pci_iommu(dev->bus, tbl);
-
-	return 0;
-
-free_tbl:
-	kfree(tbl);
-done:
-	return ret;
-}
-
-void * __init alloc_tce_table(void)
-{
-	unsigned int size;
-
-	size = table_size_to_number_of_entries(specified_table_size);
-	size *= TCE_ENTRY_SIZE;
-
-	return memblock_alloc_low(size, size);
-}
-
-void __init free_tce_table(void *tbl)
-{
-	unsigned int size;
-
-	if (!tbl)
-		return;
-
-	size = table_size_to_number_of_entries(specified_table_size);
-	size *= TCE_ENTRY_SIZE;
-
-	memblock_free(__pa(tbl), size);
-}

arch/x86/kernel/traps.c

@@ -37,11 +37,6 @@
 #include <linux/mm.h>
 #include <linux/smp.h>
 #include <linux/io.h>
-
-#if defined(CONFIG_EDAC)
-#include <linux/edac.h>
-#endif
-
 #include <asm/stacktrace.h>
 #include <asm/processor.h>
 #include <asm/debugreg.h>

arch/x86/kernel/uprobes.c

@@ -842,8 +842,8 @@ static int push_setup_xol_ops(struct arch_uprobe *auprobe, struct insn *insn)
 
 /**
  * arch_uprobe_analyze_insn - instruction analysis including validity and fixups.
+ * @auprobe: the probepoint information.
  * @mm: the probed address space.
- * @arch_uprobe: the probepoint information.
  * @addr: virtual address at which to install the probepoint
  * Return 0 on success or a -ve number on error.
  */

arch/x86/mm/numa.c

@@ -699,7 +699,7 @@ static int __init dummy_numa_init(void)
  * x86_numa_init - Initialize NUMA
  *
  * Try each configured NUMA initialization method until one succeeds.  The
- * last fallback is dummy single node config encomapssing whole memory and
+ * last fallback is dummy single node config encompassing whole memory and
  * never fails.
  */
 void __init x86_numa_init(void)

arch/x86/tools/gen-insn-attr-x86.awk

@@ -69,7 +69,7 @@ BEGIN {
 
 	lprefix1_expr = "\\((66|!F3)\\)"
 	lprefix2_expr = "\\(F3\\)"
-	lprefix3_expr = "\\((F2|!F3|66\\&F2)\\)"
+	lprefix3_expr = "\\((F2|!F3|66&F2)\\)"
 	lprefix_expr = "\\((66|F2|F3)\\)"
 	max_lprefix = 4
 
@@ -257,7 +257,7 @@ function convert_operands(count,opnd,       i,j,imm,mod)
 	return add_flags(imm, mod)
 }
 
-/^[0-9a-f]+\:/ {
+/^[0-9a-f]+:/ {
 	if (NR == 1)
 		next
 	# get index

tools/arch/x86/tools/gen-insn-attr-x86.awk

@@ -69,7 +69,7 @@ BEGIN {
 
 	lprefix1_expr = "\\((66|!F3)\\)"
 	lprefix2_expr = "\\(F3\\)"
-	lprefix3_expr = "\\((F2|!F3|66\\&F2)\\)"
+	lprefix3_expr = "\\((F2|!F3|66&F2)\\)"
 	lprefix_expr = "\\((66|F2|F3)\\)"
 	max_lprefix = 4
 
@@ -257,7 +257,7 @@ function convert_operands(count,opnd,       i,j,imm,mod)
 	return add_flags(imm, mod)
 }
 
-/^[0-9a-f]+\:/ {
+/^[0-9a-f]+:/ {
 	if (NR == 1)
 		next
 	# get index