Skip to content

L
linux
Commit fd445899 authored by H Hartley Sweeten's avatar H Hartley Sweeten Committed by Greg Kroah-Hartman
Browse files
Options

staging: comedi: addi_amcc_S5920.[ch]: remove unnecessary files 

The addi_amcc_S5920.c file only has the function i_AddiHeaderRW_ReadEeprom()
in it. The addi_amcc_S5920.h file has a prototype for this function and a
couple defines for the magic numbers used when accessing the eeprom.

The .c file is not actually built by any .config selection, or by an

The .h file is only #include'd by the hwdrv_apci3200.c file. That file
actually has a local version of the i_AddiHeaderRW_ReadEeprom() function
that is identical to the one in the .c file.

Just move the #define's from the .h file into hwdrv_apci3200.c and remove
the addi_amcc_S5920.[ch] files.
Signed-off-by: default avatarH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent a8b1e45f
Hide whitespace changes
Inline Side-by-side
Showing with 7 additions and 227 deletions
drivers/staging/comedi/drivers/addi-data/addi_amcc_S5920.c deleted 100644 → 0
View file @ a8b1e45f
/**
@verbatim
Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
ADDI-DATA GmbH
Dieselstrasse 3
D-77833 Ottersweier
Tel: +19(0)7223/9493-0
Fax: +49(0)7223/9493-92
http://www.addi-data.com
info@addi-data.com
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
You should also find the complete GPL in the COPYING file accompanying this source code.
@endverbatim
*/
/*
+-----------------------------------------------------------------------+
| (C) ADDI-DATA GmbH Dieselstraße 3 D-77833 Ottersweier |
+-----------------------------------------------------------------------+
| Tel : +49 (0) 7223/9493-0 | email : info@addi-data.com |
| Fax : +49 (0) 7223/9493-92 | Internet : http://www.addi-data.com |
+-------------------------------+---------------------------------------+
| Project : ADDI HEADER READ WRITER | Compiler : Visual C++ |
| Module name : S5920.cpp | Version : 6.0 |
+-------------------------------+---------------------------------------+
| Author : E. LIBS Date : 02/05/2002 |
+-----------------------------------------------------------------------+
| Description : DLL with the S5920 PCI Controller functions |
+-----------------------------------------------------------------------+
| UPDATE'S |
+-----------------------------------------------------------------------+
| Date | Author | Description of updates |
+----------+-----------+------------------------------------------------+
| 28/08/02 | LIBS Eric | Add return codes each time a function of the |
| | | Addi Library is called |
+-----------------------------------------------------------------------+
| 31/07/03 | KRAUTH J. | Changes for the MSX-Box |
+-----------------------------------------------------------------------+
*/
#include "addi_amcc_S5920.h"
/*+----------------------------------------------------------------------------+*/
/*| Function Name : int i_AddiHeaderRW_ReadEeprom |*/
/*| (int i_NbOfWordsToRead, |*/
/*| unsigned int dw_PCIBoardEepromAddress, |*/
/*| unsigned short w_EepromStartAddress, |*/
/*| unsigned short * pw_DataRead) |*/
/*+----------------------------------------------------------------------------+*/
/*| Task : Read word from the 5920 eeprom. |*/
/*+----------------------------------------------------------------------------+*/
/*| Input Parameters : int i_NbOfWordsToRead : Nbr. of word to read |*/
/*| unsigned int dw_PCIBoardEepromAddress : Address of the eeprom |*/
/*| unsigned short w_EepromStartAddress : Eeprom start address |*/
/*+----------------------------------------------------------------------------+*/
/*| Output Parameters : unsigned short * pw_DataRead : Read data |*/
/*+----------------------------------------------------------------------------+*/
/*| Return Value : - |*/
/*+----------------------------------------------------------------------------+*/
int i_AddiHeaderRW_ReadEeprom(int i_NbOfWordsToRead,
unsigned int dw_PCIBoardEepromAddress,
unsigned short w_EepromStartAddress, unsigned short *pw_DataRead)
{
unsigned int dw_eeprom_busy = 0;
int i_Counter = 0;
int i_WordCounter;
int i;
unsigned char pb_ReadByte[1];
unsigned char b_ReadLowByte = 0;
unsigned char b_ReadHighByte = 0;
unsigned char b_SelectedAddressLow = 0;
unsigned char b_SelectedAddressHigh = 0;
unsigned short w_ReadWord = 0;
for (i_WordCounter = 0; i_WordCounter < i_NbOfWordsToRead;
i_WordCounter++) {
do {
dw_eeprom_busy =
inl(dw_PCIBoardEepromAddress +
AMCC_OP_REG_MCSR);
dw_eeprom_busy = dw_eeprom_busy & EEPROM_BUSY;
} while (dw_eeprom_busy == EEPROM_BUSY);
for (i_Counter = 0; i_Counter < 2; i_Counter++) {
b_SelectedAddressLow = (w_EepromStartAddress + i_Counter) % 256; /* Read the low 8 bit part */
b_SelectedAddressHigh = (w_EepromStartAddress + i_Counter) / 256; /* Read the high 8 bit part */
/* Select the load low address mode */
outb(NVCMD_LOAD_LOW,
dw_PCIBoardEepromAddress + AMCC_OP_REG_MCSR +
3);
/* Wait on busy */
do {
dw_eeprom_busy =
inl(dw_PCIBoardEepromAddress +
AMCC_OP_REG_MCSR);
dw_eeprom_busy = dw_eeprom_busy & EEPROM_BUSY;
} while (dw_eeprom_busy == EEPROM_BUSY);
/* Load the low address */
outb(b_SelectedAddressLow,
dw_PCIBoardEepromAddress + AMCC_OP_REG_MCSR +
2);
/* Wait on busy */
do {
dw_eeprom_busy =
inl(dw_PCIBoardEepromAddress +
AMCC_OP_REG_MCSR);
dw_eeprom_busy = dw_eeprom_busy & EEPROM_BUSY;
} while (dw_eeprom_busy == EEPROM_BUSY);
/* Select the load high address mode */
outb(NVCMD_LOAD_HIGH,
dw_PCIBoardEepromAddress + AMCC_OP_REG_MCSR +
3);
/* Wait on busy */
do {
dw_eeprom_busy =
inl(dw_PCIBoardEepromAddress +
AMCC_OP_REG_MCSR);
dw_eeprom_busy = dw_eeprom_busy & EEPROM_BUSY;
} while (dw_eeprom_busy == EEPROM_BUSY);
/* Load the high address */
outb(b_SelectedAddressHigh,
dw_PCIBoardEepromAddress + AMCC_OP_REG_MCSR +
2);
/* Wait on busy */
do {
dw_eeprom_busy =
inl(dw_PCIBoardEepromAddress +
AMCC_OP_REG_MCSR);
dw_eeprom_busy = dw_eeprom_busy & EEPROM_BUSY;
} while (dw_eeprom_busy == EEPROM_BUSY);
/* Select the READ mode */
outb(NVCMD_BEGIN_READ,
dw_PCIBoardEepromAddress + AMCC_OP_REG_MCSR +
3);
/* Wait on busy */
do {
dw_eeprom_busy =
inl(dw_PCIBoardEepromAddress +
AMCC_OP_REG_MCSR);
dw_eeprom_busy = dw_eeprom_busy & EEPROM_BUSY;
} while (dw_eeprom_busy == EEPROM_BUSY);
/* Read data into the EEPROM */
*pb_ReadByte =
inb(dw_PCIBoardEepromAddress +
AMCC_OP_REG_MCSR + 2);
/* Wait on busy */
do {
dw_eeprom_busy =
inl(dw_PCIBoardEepromAddress +
AMCC_OP_REG_MCSR);
dw_eeprom_busy = dw_eeprom_busy & EEPROM_BUSY;
} while (dw_eeprom_busy == EEPROM_BUSY);
/* Select the upper address part */
if (i_Counter == 0)
b_ReadLowByte = pb_ReadByte[0];
else
b_ReadHighByte = pb_ReadByte[0];
/* Sleep */
msleep(1);
}
w_ReadWord =
(b_ReadLowByte | (((unsigned short)b_ReadHighByte) *
256));
pw_DataRead[i_WordCounter] = w_ReadWord;
w_EepromStartAddress += 2; /* to read the next word */
} /* for (...) i_NbOfWordsToRead */
return 0;
}
drivers/staging/comedi/drivers/addi-data/addi_amcc_S5920.h deleted 100644 → 0
View file @ a8b1e45f
/*
* Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module.
*
* ADDI-DATA GmbH
* Dieselstrasse 3
* D-77833 Ottersweier
* Tel: +19(0)7223/9493-0
* Fax: +49(0)7223/9493-92
* http://www.addi-data.com
* info@addi-data.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
* Software Foundation; either version 2 of the License, or (at your option)
* any later version.
*/
#define AMCC_OP_REG_MCSR 0x3c
#define EEPROM_BUSY 0x80000000
#define NVCMD_LOAD_LOW (0x4 << 5) /* nvRam load low command */
#define NVCMD_LOAD_HIGH (0x5 << 5) /* nvRam load high command */
#define NVCMD_BEGIN_READ (0x7 << 5) /* nvRam begin read command */
#define NVCMD_BEGIN_WRITE (0x6 << 5) /* EEPROM begin write command */
int i_AddiHeaderRW_ReadEeprom(int i_NbOfWordsToRead,
unsigned int dw_PCIBoardEepromAddress,
unsigned short w_EepromStartAddress, unsigned short *pw_DataRead);
drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.c
View file @ fd445899
......@@ -57,11 +57,8 @@ You should also find the complete GPL in the COPYING file accompanying this sour
+----------------------------------------------------------------------------+
*/
#include "hwdrv_apci3200.h"
/* Begin JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
#include "addi_amcc_S5920.h"
/* #define PRINT_INFO */
/* End JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
/* #define PRINT_INFO */
/* BEGIN JK 06.07.04: Management of sevrals boards */
/*
......@@ -90,7 +87,12 @@ You should also find the complete GPL in the COPYING file accompanying this sour
struct str_BoardInfos s_BoardInfos[100]; /* 100 will be the max number of boards to be used */
/* END JK 06.07.04: Management of sevrals boards */
/* Begin JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
#define AMCC_OP_REG_MCSR 0x3c
#define EEPROM_BUSY 0x80000000
#define NVCMD_LOAD_LOW (0x4 << 5) /* nvRam load low command */
#define NVCMD_LOAD_HIGH (0x5 << 5) /* nvRam load high command */
#define NVCMD_BEGIN_READ (0x7 << 5) /* nvRam begin read command */
#define NVCMD_BEGIN_WRITE (0x6 << 5) /* EEPROM begin write command */
/*+----------------------------------------------------------------------------+*/
/*| Function Name : int i_AddiHeaderRW_ReadEeprom |*/
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7