Merge tag 'hwmon-for-linus-v4.7' of...

Merge tag 'hwmon-for-linus-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck:

 - major rework of it87 driver: cleanup, added support for additional
   attributes, added support for two chips in the system, added support
   for IT8728E

 - fam17h_power driver now reports accumulated power consumption

 - new driver for MAX31722/MAX31723 temperature sensors

 - minor fixes to sch5636 and ads7828 drivers

* tag 'hwmon-for-linus-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (35 commits)
  hwmon: (sch5636) trivial fix of spelling mistake on revision
  hwmon: (it87) Add support for IT8628E
  hwmon: (it87) Fix pwm_temp_map for system with 6 pwm channels
  hwmon: (it87) Support automatic pwm control on newer chips
  hwmon: (it87) Enhance validation for fan4 and fan5
  hwmon: (it87) Support disabling fan control for all pwm control and chips
  hwmon: (it87) Formatting cleanup
  hwmon: (it87) Use defines for array sizes and sensor counts
  hwmon: (it87) Use BIT macro
  hwmon: (it87) Add support for VIN7 to VIN10 on IT8620E
  hwmon: (it87) Simplify reading voltage registers
  hwmon: (it87) Support up to 6 temperature sensors on IT8620E
  hwmon: (it87) Convert to use new hwmon API
  hwmon: (it87) Use single group and is_visible for miscellaneous attributes
  hwmon: (it87) Use is_visible for pwm attributes
  hwmon: (it87) Use is_visible for fan attributes
  hwmon: (it87) Use is_visible for temperature sensors
  hwmon: (it87) Use is_visible for voltage sensors
  hwmon: (it87) Rearrange code to avoid forward declarations
  hwmon: (it87) Add support for second Super-IO chip
  ...

Documentation/devicetree/bindings/hwmon/ltc2978.txt

@@ -13,6 +13,7 @@ Required properties:
   * "lltc,ltc3886"
   * "lltc,ltc3887"
   * "lltc,ltm2987"
+  * "lltc,ltm4675"
   * "lltc,ltm4676"
 - reg: I2C slave address
 

Documentation/hwmon/fam15h_power

@@ -10,14 +10,22 @@ Supported chips:
   Datasheets:
   BIOS and Kernel Developer's Guide (BKDG) For AMD Family 15h Processors
   BIOS and Kernel Developer's Guide (BKDG) For AMD Family 16h Processors
+  AMD64 Architecture Programmer's Manual Volume 2: System Programming
 
 Author: Andreas Herrmann <herrmann.der.user@googlemail.com>
 
 Description
 -----------
 
+1) Processor TDP (Thermal design power)
+
+Given a fixed frequency and voltage, the power consumption of a
+processor varies based on the workload being executed. Derated power
+is the power consumed when running a specific application. Thermal
+design power (TDP) is an example of derated power.
+
 This driver permits reading of registers providing power information
-of AMD Family 15h and 16h processors.
+of AMD Family 15h and 16h processors via TDP algorithm.
 
 For AMD Family 15h and 16h processors the following power values can
 be calculated using different processor northbridge function
@@ -37,3 +45,58 @@ This driver provides ProcessorPwrWatts and CurrPwrWatts:
 On multi-node processors the calculated value is for the entire
 package and not for a single node. Thus the driver creates sysfs
 attributes only for internal node0 of a multi-node processor.
+
+2) Accumulated Power Mechanism
+
+This driver also introduces an algorithm that should be used to
+calculate the average power consumed by a processor during a
+measurement interval Tm. The feature of accumulated power mechanism is
+indicated by CPUID Fn8000_0007_EDX[12].
+
+* Tsample: compute unit power accumulator sample period
+* Tref: the PTSC counter period
+* PTSC: performance timestamp counter
+* N: the ratio of compute unit power accumulator sample period to the
+  PTSC period
+* Jmax: max compute unit accumulated power which is indicated by
+  MaxCpuSwPwrAcc MSR C001007b
+* Jx/Jy: compute unit accumulated power which is indicated by
+  CpuSwPwrAcc MSR C001007a
+* Tx/Ty: the value of performance timestamp counter which is indicated
+  by CU_PTSC MSR C0010280
+* PwrCPUave: CPU average power
+
+i. Determine the ratio of Tsample to Tref by executing CPUID Fn8000_0007.
+	N = value of CPUID Fn8000_0007_ECX[CpuPwrSampleTimeRatio[15:0]].
+
+ii. Read the full range of the cumulative energy value from the new
+MSR MaxCpuSwPwrAcc.
+	Jmax = value returned.
+iii. At time x, SW reads CpuSwPwrAcc MSR and samples the PTSC.
+	Jx = value read from CpuSwPwrAcc and Tx = value read from
+PTSC.
+
+iv. At time y, SW reads CpuSwPwrAcc MSR and samples the PTSC.
+	Jy = value read from CpuSwPwrAcc and Ty = value read from
+PTSC.
+
+v. Calculate the average power consumption for a compute unit over
+time period (y-x). Unit of result is uWatt.
+	if (Jy < Jx) // Rollover has occurred
+		Jdelta = (Jy + Jmax) - Jx
+	else
+		Jdelta = Jy - Jx
+	PwrCPUave = N * Jdelta * 1000 / (Ty - Tx)
+
+This driver provides PwrCPUave and interval(default is 10 millisecond
+and maximum is 1 second):
+* power1_average (PwrCPUave)
+* power1_average_interval (Interval)
+
+The power1_average_interval can be updated at /etc/sensors3.conf file
+as below:
+
+chip "fam15h_power-*"
+	set power1_average_interval 0.01
+
+Then save it with "sensors -s".

Documentation/hwmon/it87

@@ -9,6 +9,9 @@ Supported chips:
   * IT8620E
     Prefix: 'it8620'
     Addresses scanned: from Super I/O config space (8 I/O ports)
+  * IT8628E
+    Prefix: 'it8628'
+    Addresses scanned: from Super I/O config space (8 I/O ports)
     Datasheet: Not publicly available
   * IT8705F
     Prefix: 'it87'
@@ -114,8 +117,8 @@ motherboard models.
 Description
 -----------
 
-This driver implements support for the IT8603E, IT8620E, IT8623E, IT8705F,
-IT8712F, IT8716F, IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8732F,
+This driver implements support for the IT8603E, IT8620E, IT8623E, IT8628E,
+IT8705F, IT8712F, IT8716F, IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8732F,
 IT8758E, IT8771E, IT8772E, IT8781F, IT8782F, IT8783E/F, IT8786E, IT8790E, and
 SiS950 chips.
 
@@ -158,8 +161,8 @@ The IT8603E/IT8623E is a custom design, hardware monitoring part is similar to
 IT8728F. It only supports 3 fans, 16-bit fan mode, and the full speed mode
 of the fan is not supported (value 0 of pwmX_enable).
 
-The IT8620E is another custom design, hardware monitoring part is similar to
-IT8728F. It only supports 16-bit fan mode.
+The IT8620E and IT8628E are custom designs, hardware monitoring part is similar
+to IT8728F. It only supports 16-bit fan mode. Both chips support up to 6 fans.
 
 The IT8790E supports up to 3 fans. 16-bit fan mode is always enabled.
 
@@ -187,8 +190,8 @@ of 0.016 volt.  IT8603E, IT8721F/IT8758E and IT8728F can measure between 0 and
 2.8 volts with a resolution of 0.0109 volt.  The battery voltage in8 does not
 have limit registers.
 
-On the IT8603E, IT8721F/IT8758E, IT8732F, IT8781F, IT8782F, and IT8783E/F, some
-voltage inputs are internal and scaled inside the chip:
+On the IT8603E, IT8620E, IT8628E, IT8721F/IT8758E, IT8732F, IT8781F, IT8782F,
+and IT8783E/F, some voltage inputs are internal and scaled inside the chip:
 * in3 (optional)
 * in7 (optional for IT8781F, IT8782F, and IT8783E/F)
 * in8 (always)

Documentation/hwmon/max31722

+Kernel driver max31722
+======================
+
+Supported chips:
+  * Maxim Integrated MAX31722
+    Prefix: 'max31722'
+    ACPI ID: MAX31722
+    Addresses scanned: -
+    Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX31722-MAX31723.pdf
+  * Maxim Integrated MAX31723
+    Prefix: 'max31723'
+    ACPI ID: MAX31723
+    Addresses scanned: -
+    Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX31722-MAX31723.pdf
+
+Author: Tiberiu Breana <tiberiu.a.breana@intel.com>
+
+Description
+-----------
+
+This driver adds support for the Maxim Integrated MAX31722/MAX31723 thermometers
+and thermostats running over an SPI interface.
+
+Usage Notes
+-----------
+
+This driver uses ACPI to auto-detect devices. See ACPI IDs in the above section.
+
+Sysfs entries
+-------------
+
+The following attribute is supported:
+
+temp1_input		Measured temperature. Read-only.

drivers/hwmon/Kconfig

@@ -288,7 +288,7 @@ config SENSORS_K10TEMP
 
 config SENSORS_FAM15H_POWER
 	tristate "AMD Family 15h processor power"
-	depends on X86 && PCI
+	depends on X86 && PCI && CPU_SUP_AMD
 	help
 	  If you say yes here you get support for processor power
 	  information of your AMD family 15h CPU.
@@ -621,7 +621,8 @@ config SENSORS_IT87
 	  If you say yes here you get support for ITE IT8705F, IT8712F, IT8716F,
 	  IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8732F, IT8758E,
 	  IT8771E, IT8772E, IT8781F, IT8782F, IT8783E/F, IT8786E, IT8790E,
-	  IT8603E, IT8620E, and IT8623E sensor chips, and the SiS950 clone.
+	  IT8603E, IT8620E, IT8623E, and IT8628E sensor chips, and the SiS950
+	  clone.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called it87.
@@ -821,6 +822,16 @@ config SENSORS_MAX197
 	  This driver can also be built as a module. If so, the module
 	  will be called max197.
 
+config SENSORS_MAX31722
+tristate "MAX31722 temperature sensor"
+	depends on SPI
+	help
+	  Support for the Maxim Integrated MAX31722/MAX31723 digital
+	  thermometers/thermostats operating over an SPI interface.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called max31722.
+
 config SENSORS_MAX6639
 	tristate "Maxim MAX6639 sensor chip"
 	depends on I2C

drivers/hwmon/Makefile

@@ -112,6 +112,7 @@ obj-$(CONFIG_SENSORS_MAX16065)	+= max16065.o
 obj-$(CONFIG_SENSORS_MAX1619)	+= max1619.o
 obj-$(CONFIG_SENSORS_MAX1668)	+= max1668.o
 obj-$(CONFIG_SENSORS_MAX197)	+= max197.o
+obj-$(CONFIG_SENSORS_MAX31722)	+= max31722.o
 obj-$(CONFIG_SENSORS_MAX6639)	+= max6639.o
 obj-$(CONFIG_SENSORS_MAX6642)	+= max6642.o
 obj-$(CONFIG_SENSORS_MAX6650)	+= max6650.o

drivers/hwmon/ads7828.c

@@ -120,6 +120,7 @@ static int ads7828_probe(struct i2c_client *client,
 	unsigned int vref_mv = ADS7828_INT_VREF_MV;
 	bool diff_input = false;
 	bool ext_vref = false;
+	unsigned int regval;
 
 	data = devm_kzalloc(dev, sizeof(struct ads7828_data), GFP_KERNEL);
 	if (!data)
@@ -154,6 +155,15 @@ static int ads7828_probe(struct i2c_client *client,
 	if (!diff_input)
 		data->cmd_byte |= ADS7828_CMD_SD_SE;
 
+	/*
+	 * Datasheet specifies internal reference voltage is disabled by
+	 * default. The internal reference voltage needs to be enabled and
+	 * voltage needs to settle before getting valid ADC data. So perform a
+	 * dummy read to enable the internal reference voltage.
+	 */
+	if (!ext_vref)
+		regmap_read(data->regmap, data->cmd_byte, &regval);
+
 	hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
 							   data,
 							   ads7828_groups);

drivers/hwmon/fam15h_power.c

 /*
  * fam15h_power.c - AMD Family 15h processor power monitoring
  *
- * Copyright (c) 2011 Advanced Micro Devices, Inc.
+ * Copyright (c) 2011-2016 Advanced Micro Devices, Inc.
  * Author: Andreas Herrmann <herrmann.der.user@googlemail.com>
  *
  *
@@ -25,6 +25,10 @@
 #include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/bitops.h>
+#include <linux/cpu.h>
+#include <linux/cpumask.h>
+#include <linux/time.h>
+#include <linux/sched.h>
 #include <asm/processor.h>
 #include <asm/msr.h>
 
@@ -44,8 +48,14 @@ MODULE_LICENSE("GPL");
 
 #define FAM15H_MIN_NUM_ATTRS		2
 #define FAM15H_NUM_GROUPS		2
+#define MAX_CUS				8
 
+/* set maximum interval as 1 second */
+#define MAX_INTERVAL			1000
+
+#define MSR_F15H_CU_PWR_ACCUMULATOR	0xc001007a
 #define MSR_F15H_CU_MAX_PWR_ACCUMULATOR	0xc001007b
+#define MSR_F15H_PTSC			0xc0010280
 
 #define PCI_DEVICE_ID_AMD_15H_M70H_NB_F4 0x15b4
 
@@ -59,8 +69,20 @@ struct fam15h_power_data {
 	struct attribute_group group;
 	/* maximum accumulated power of a compute unit */
 	u64 max_cu_acc_power;
+	/* accumulated power of the compute units */
+	u64 cu_acc_power[MAX_CUS];
+	/* performance timestamp counter */
+	u64 cpu_sw_pwr_ptsc[MAX_CUS];
+	/* online/offline status of current compute unit */
+	int cu_on[MAX_CUS];
+	unsigned long power_period;
 };
 
+static bool is_carrizo_or_later(void)
+{
+	return boot_cpu_data.x86 == 0x15 && boot_cpu_data.x86_model >= 0x60;
+}
+
 static ssize_t show_power(struct device *dev,
 			  struct device_attribute *attr, char *buf)
 {
@@ -77,7 +99,7 @@ static ssize_t show_power(struct device *dev,
 	 * On Carrizo and later platforms, TdpRunAvgAccCap bit field
 	 * is extended to 4:31 from 4:25.
 	 */
-	if (boot_cpu_data.x86 == 0x15 && boot_cpu_data.x86_model >= 0x60) {
+	if (is_carrizo_or_later()) {
 		running_avg_capture = val >> 4;
 		running_avg_capture = sign_extend32(running_avg_capture, 27);
 	} else {
@@ -94,7 +116,7 @@ static ssize_t show_power(struct device *dev,
 	 * On Carrizo and later platforms, ApmTdpLimit bit field
 	 * is extended to 16:31 from 16:28.
 	 */
-	if (boot_cpu_data.x86 == 0x15 && boot_cpu_data.x86_model >= 0x60)
+	if (is_carrizo_or_later())
 		tdp_limit = val >> 16;
 	else
 		tdp_limit = (val >> 16) & 0x1fff;
@@ -125,6 +147,167 @@ static ssize_t show_power_crit(struct device *dev,
 }
 static DEVICE_ATTR(power1_crit, S_IRUGO, show_power_crit, NULL);
 
+static void do_read_registers_on_cu(void *_data)
+{
+	struct fam15h_power_data *data = _data;
+	int cpu, cu;
+
+	cpu = smp_processor_id();
+
+	/*
+	 * With the new x86 topology modelling, cpu core id actually
+	 * is compute unit id.
+	 */
+	cu = cpu_data(cpu).cpu_core_id;
+
+	rdmsrl_safe(MSR_F15H_CU_PWR_ACCUMULATOR, &data->cu_acc_power[cu]);
+	rdmsrl_safe(MSR_F15H_PTSC, &data->cpu_sw_pwr_ptsc[cu]);
+
+	data->cu_on[cu] = 1;
+}
+
+/*
+ * This function is only able to be called when CPUID
+ * Fn8000_0007:EDX[12] is set.
+ */
+static int read_registers(struct fam15h_power_data *data)
+{
+	int this_cpu, ret, cpu;
+	int core, this_core;
+	cpumask_var_t mask;
+
+	ret = zalloc_cpumask_var(&mask, GFP_KERNEL);
+	if (!ret)
+		return -ENOMEM;
+
+	memset(data->cu_on, 0, sizeof(int) * MAX_CUS);
+
+	get_online_cpus();
+	this_cpu = smp_processor_id();
+
+	/*
+	 * Choose the first online core of each compute unit, and then
+	 * read their MSR value of power and ptsc in a single IPI,
+	 * because the MSR value of CPU core represent the compute
+	 * unit's.
+	 */
+	core = -1;
+
+	for_each_online_cpu(cpu) {
+		this_core = topology_core_id(cpu);
+
+		if (this_core == core)
+			continue;
+
+		core = this_core;
+
+		/* get any CPU on this compute unit */
+		cpumask_set_cpu(cpumask_any(topology_sibling_cpumask(cpu)), mask);
+	}
+
+	if (cpumask_test_cpu(this_cpu, mask))
+		do_read_registers_on_cu(data);
+
+	smp_call_function_many(mask, do_read_registers_on_cu, data, true);
+	put_online_cpus();
+
+	free_cpumask_var(mask);
+
+	return 0;
+}
+
+static ssize_t acc_show_power(struct device *dev,
+			      struct device_attribute *attr,
+			      char *buf)
+{
+	struct fam15h_power_data *data = dev_get_drvdata(dev);
+	u64 prev_cu_acc_power[MAX_CUS], prev_ptsc[MAX_CUS],
+	    jdelta[MAX_CUS];
+	u64 tdelta, avg_acc;
+	int cu, cu_num, ret;
+	signed long leftover;
+
+	/*
+	 * With the new x86 topology modelling, x86_max_cores is the
+	 * compute unit number.
+	 */
+	cu_num = boot_cpu_data.x86_max_cores;
+
+	ret = read_registers(data);
+	if (ret)
+		return 0;
+
+	for (cu = 0; cu < cu_num; cu++) {
+		prev_cu_acc_power[cu] = data->cu_acc_power[cu];
+		prev_ptsc[cu] = data->cpu_sw_pwr_ptsc[cu];
+	}
+
+	leftover = schedule_timeout_interruptible(msecs_to_jiffies(data->power_period));
+	if (leftover)
+		return 0;
+
+	ret = read_registers(data);
+	if (ret)
+		return 0;
+
+	for (cu = 0, avg_acc = 0; cu < cu_num; cu++) {
+		/* check if current compute unit is online */
+		if (data->cu_on[cu] == 0)
+			continue;
+
+		if (data->cu_acc_power[cu] < prev_cu_acc_power[cu]) {
+			jdelta[cu] = data->max_cu_acc_power + data->cu_acc_power[cu];
+			jdelta[cu] -= prev_cu_acc_power[cu];
+		} else {
+			jdelta[cu] = data->cu_acc_power[cu] - prev_cu_acc_power[cu];
+		}
+		tdelta = data->cpu_sw_pwr_ptsc[cu] - prev_ptsc[cu];
+		jdelta[cu] *= data->cpu_pwr_sample_ratio * 1000;
+		do_div(jdelta[cu], tdelta);
+
+		/* the unit is microWatt */
+		avg_acc += jdelta[cu];
+	}
+
+	return sprintf(buf, "%llu\n", (unsigned long long)avg_acc);
+}
+static DEVICE_ATTR(power1_average, S_IRUGO, acc_show_power, NULL);
+
+static ssize_t acc_show_power_period(struct device *dev,
+				     struct device_attribute *attr,
+				     char *buf)
+{
+	struct fam15h_power_data *data = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%lu\n", data->power_period);
+}
+
+static ssize_t acc_set_power_period(struct device *dev,
+				    struct device_attribute *attr,
+				    const char *buf, size_t count)
+{
+	struct fam15h_power_data *data = dev_get_drvdata(dev);
+	unsigned long temp;
+	int ret;
+
+	ret = kstrtoul(buf, 10, &temp);
+	if (ret)
+		return ret;
+
+	if (temp > MAX_INTERVAL)
+		return -EINVAL;
+
+	/* the interval value should be greater than 0 */
+	if (temp <= 0)
+		return -EINVAL;
+
+	data->power_period = temp;
+
+	return count;
+}
+static DEVICE_ATTR(power1_average_interval, S_IRUGO | S_IWUSR,
+		   acc_show_power_period, acc_set_power_period);
+
 static int fam15h_power_init_attrs(struct pci_dev *pdev,
 				   struct fam15h_power_data *data)
 {
@@ -137,6 +320,10 @@ static int fam15h_power_init_attrs(struct pci_dev *pdev,
 	     (c->x86_model >= 0x60 && c->x86_model <= 0x7f)))
 		n += 1;
 
+	/* check if processor supports accumulated power */
+	if (boot_cpu_has(X86_FEATURE_ACC_POWER))
+		n += 2;
+
 	fam15h_power_attrs = devm_kcalloc(&pdev->dev, n,
 					  sizeof(*fam15h_power_attrs),
 					  GFP_KERNEL);
@@ -151,6 +338,11 @@ static int fam15h_power_init_attrs(struct pci_dev *pdev,
 	     (c->x86_model >= 0x60 && c->x86_model <= 0x7f)))
 		fam15h_power_attrs[n++] = &dev_attr_power1_input.attr;
 
+	if (boot_cpu_has(X86_FEATURE_ACC_POWER)) {
+		fam15h_power_attrs[n++] = &dev_attr_power1_average.attr;
+		fam15h_power_attrs[n++] = &dev_attr_power1_average_interval.attr;
+	}
+
 	data->group.attrs = fam15h_power_attrs;
 
 	return 0;
@@ -216,7 +408,7 @@ static int fam15h_power_resume(struct pci_dev *pdev)
 static int fam15h_power_init_data(struct pci_dev *f4,
 				  struct fam15h_power_data *data)
 {
-	u32 val, eax, ebx, ecx, edx;
+	u32 val;
 	u64 tmp;
 	int ret;
 
@@ -243,10 +435,9 @@ static int fam15h_power_init_data(struct pci_dev *f4,
 	if (ret)
 		return ret;
 
-	cpuid(0x80000007, &eax, &ebx, &ecx, &edx);
 
 	/* CPUID Fn8000_0007:EDX[12] indicates to support accumulated power */
-	if (!(edx & BIT(12)))
+	if (!boot_cpu_has(X86_FEATURE_ACC_POWER))
 		return 0;
 
 	/*
@@ -254,7 +445,7 @@ static int fam15h_power_init_data(struct pci_dev *f4,
 	 * sample period to the PTSC counter period by executing CPUID
 	 * Fn8000_0007:ECX
 	 */
-	data->cpu_pwr_sample_ratio = ecx;
+	data->cpu_pwr_sample_ratio = cpuid_ecx(0x80000007);
 
 	if (rdmsrl_safe(MSR_F15H_CU_MAX_PWR_ACCUMULATOR, &tmp)) {
 		pr_err("Failed to read max compute unit power accumulator MSR\n");
@@ -263,7 +454,15 @@ static int fam15h_power_init_data(struct pci_dev *f4,
 
 	data->max_cu_acc_power = tmp;
 
-	return 0;
+	/*
+	 * Milliseconds are a reasonable interval for the measurement.
+	 * But it shouldn't set too long here, because several seconds
+	 * would cause the read function to hang. So set default
+	 * interval as 10 ms.
+	 */
+	data->power_period = 10;
+
+	return read_registers(data);
 }
 
 static int fam15h_power_probe(struct pci_dev *pdev,

drivers/hwmon/max31722.c

+/*
+ * max31722 - hwmon driver for Maxim Integrated MAX31722/MAX31723 SPI
+ * digital thermometer and thermostats.
+ *
+ * Copyright (c) 2016, Intel Corporation.
+ *
+ * This file is subject to the terms and conditions of version 2 of
+ * the GNU General Public License. See the file COPYING in the main
+ * directory of this archive for more details.
+ */
+
+#include <linux/acpi.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/spi/spi.h>
+
+#define MAX31722_REG_CFG				0x00
+#define MAX31722_REG_TEMP_LSB				0x01
+
+#define MAX31722_MODE_CONTINUOUS			0x00
+#define MAX31722_MODE_STANDBY				0x01
+#define MAX31722_MODE_MASK				0xFE
+#define MAX31722_RESOLUTION_12BIT			0x06
+#define MAX31722_WRITE_MASK				0x80
+
+struct max31722_data {
+	struct device *hwmon_dev;
+	struct spi_device *spi_device;
+	u8 mode;
+};
+
+static int max31722_set_mode(struct max31722_data *data, u8 mode)
+{
+	int ret;
+	struct spi_device *spi = data->spi_device;
+	u8 buf[2] = {
+		MAX31722_REG_CFG | MAX31722_WRITE_MASK,
+		(data->mode & MAX31722_MODE_MASK) | mode
+	};
+
+	ret = spi_write(spi, &buf, sizeof(buf));
+	if (ret < 0) {
+		dev_err(&spi->dev, "failed to set sensor mode.\n");
+		return ret;
+	}
+	data->mode = (data->mode & MAX31722_MODE_MASK) | mode;
+
+	return 0;
+}
+
+static ssize_t max31722_show_temp(struct device *dev,
+				  struct device_attribute *attr,
+				  char *buf)
+{
+	ssize_t ret;
+	struct max31722_data *data = dev_get_drvdata(dev);
+
+	ret = spi_w8r16(data->spi_device, MAX31722_REG_TEMP_LSB);
+	if (ret < 0)
+		return ret;
+	/* Keep 12 bits and multiply by the scale of 62.5 millidegrees/bit. */
+	return sprintf(buf, "%d\n", (s16)le16_to_cpu(ret) * 125 / 32);
+}
+
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO,
+			  max31722_show_temp, NULL, 0);
+
+static struct attribute *max31722_attrs[] = {
+	&sensor_dev_attr_temp1_input.dev_attr.attr,
+	NULL,
+};
+
+ATTRIBUTE_GROUPS(max31722);
+
+static int max31722_probe(struct spi_device *spi)
+{
+	int ret;
+	struct max31722_data *data;
+
+	data = devm_kzalloc(&spi->dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	spi_set_drvdata(spi, data);
+	data->spi_device = spi;
+	/*
+	 * Set SD bit to 0 so we can have continuous measurements.
+	 * Set resolution to 12 bits for maximum precision.
+	 */
+	data->mode = MAX31722_MODE_CONTINUOUS | MAX31722_RESOLUTION_12BIT;
+	ret = max31722_set_mode(data, MAX31722_MODE_CONTINUOUS);
+	if (ret < 0)
+		return ret;
+
+	data->hwmon_dev = hwmon_device_register_with_groups(&spi->dev,
+							    spi->modalias,
+							    data,
+							    max31722_groups);
+	if (IS_ERR(data->hwmon_dev)) {
+		max31722_set_mode(data, MAX31722_MODE_STANDBY);
+		return PTR_ERR(data->hwmon_dev);
+	}
+
+	return 0;
+}
+
+static int max31722_remove(struct spi_device *spi)
+{
+	struct max31722_data *data = spi_get_drvdata(spi);
+
+	hwmon_device_unregister(data->hwmon_dev);
+
+	return max31722_set_mode(data, MAX31722_MODE_STANDBY);
+}
+
+static int __maybe_unused max31722_suspend(struct device *dev)
+{
+	struct spi_device *spi_device = to_spi_device(dev);
+	struct max31722_data *data = spi_get_drvdata(spi_device);
+
+	return max31722_set_mode(data, MAX31722_MODE_STANDBY);
+}
+
+static int __maybe_unused max31722_resume(struct device *dev)
+{
+	struct spi_device *spi_device = to_spi_device(dev);
+	struct max31722_data *data = spi_get_drvdata(spi_device);
+
+	return max31722_set_mode(data, MAX31722_MODE_CONTINUOUS);
+}
+
+static SIMPLE_DEV_PM_OPS(max31722_pm_ops, max31722_suspend, max31722_resume);
+
+static const struct spi_device_id max31722_spi_id[] = {
+	{"max31722", 0},
+	{"max31723", 0},
+	{}
+};
+
+static const struct acpi_device_id __maybe_unused max31722_acpi_id[] = {
+	{"MAX31722", 0},
+	{"MAX31723", 0},
+	{}
+};
+
+MODULE_DEVICE_TABLE(spi, max31722_spi_id);
+
+static struct spi_driver max31722_driver = {
+	.driver = {
+		.name = "max31722",
+		.pm = &max31722_pm_ops,
+		.acpi_match_table = ACPI_PTR(max31722_acpi_id),
+	},
+	.probe =            max31722_probe,
+	.remove =           max31722_remove,
+	.id_table =         max31722_spi_id,
+};
+
+module_spi_driver(max31722_driver);
+
+MODULE_AUTHOR("Tiberiu Breana <tiberiu.a.breana@intel.com>");
+MODULE_DESCRIPTION("max31722 sensor driver");
+MODULE_LICENSE("GPL v2");

drivers/hwmon/sch5636.c

@@ -449,7 +449,7 @@ static int sch5636_probe(struct platform_device *pdev)
 		}
 		revision[i] = val;
 	}
-	pr_info("Found %s chip at %#hx, revison: %d.%02d\n", DEVNAME,
+	pr_info("Found %s chip at %#hx, revision: %d.%02d\n", DEVNAME,
 		data->addr, revision[0], revision[1]);
 
 	/* Read all temp + fan ctrl registers to determine which are active */