Commit fe2da896 authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC fixes from Olof Johansson:
 "A smaller batch of fixes, nothing that stands out as risky or scary.

  Mostly DTS tweaks for a few issues:

   - GPU fixlets for Meson

   - CPU idle fix for LS1028A

   - PWM interrupt fixes for i.MX6UL

  Also, enable a driver (FSL_EDMA) on arm64 defconfig, and a warning and
  two MAINTAINER tweaks"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: dts: imx6ul: fix PWM[1-4] interrupts
  ARM: omap2: remove incorrect __init annotation
  ARM: dts: gemini Fix up DNS-313 compatible string
  ARM: dts: Blank D-Link DIR-685 console
  arm64: defconfig: Enable FSL_EDMA driver
  arm64: dts: ls1028a: Fix CPU idle fail.
  MAINTAINERS: BCM53573: Add internal Broadcom mailing list
  MAINTAINERS: BCM2835: Add internal Broadcom mailing list
  ARM: dts: meson8b: fix the operating voltage of the Mali GPU
  ARM: dts: meson8b: drop undocumented property from the Mali GPU node
  ARM: dts: meson8: fix GPU interrupts and drop an undocumented property
parents cd0f3aae e73f6593
......@@ -3122,6 +3122,7 @@ F: arch/arm/mach-bcm/
BROADCOM BCM2835 ARM ARCHITECTURE
M: Eric Anholt <eric@anholt.net>
M: Stefan Wahren <wahrenst@gmx.net>
L: bcm-kernel-feedback-list@broadcom.com
L: linux-rpi-kernel@lists.infradead.org (moderated for non-subscribers)
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
T: git git://github.com/anholt/linux
......@@ -3151,6 +3152,7 @@ F: arch/arm/boot/dts/bcm953012*
BROADCOM BCM53573 ARM ARCHITECTURE
M: Rafał Miłecki <rafal@milecki.pl>
L: bcm-kernel-feedback-list@broadcom.com
L: linux-arm-kernel@lists.infradead.org
S: Maintained
F: arch/arm/boot/dts/bcm53573*
......
......@@ -20,7 +20,7 @@ memory@0 {
};
chosen {
bootargs = "console=ttyS0,19200n8 root=/dev/sda1 rw rootwait";
bootargs = "console=ttyS0,19200n8 root=/dev/sda1 rw rootwait consoleblank=300";
stdout-path = "uart0:19200n8";
};
......
......@@ -11,7 +11,7 @@
/ {
model = "D-Link DNS-313 1-Bay Network Storage Enclosure";
compatible = "dlink,dir-313", "cortina,gemini";
compatible = "dlink,dns-313", "cortina,gemini";
#address-cells = <1>;
#size-cells = <1>;
......
......@@ -358,7 +358,7 @@ tsc: tsc@2040000 {
pwm1: pwm@2080000 {
compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
reg = <0x02080000 0x4000>;
interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6UL_CLK_PWM1>,
<&clks IMX6UL_CLK_PWM1>;
clock-names = "ipg", "per";
......@@ -369,7 +369,7 @@ pwm1: pwm@2080000 {
pwm2: pwm@2084000 {
compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
reg = <0x02084000 0x4000>;
interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6UL_CLK_PWM2>,
<&clks IMX6UL_CLK_PWM2>;
clock-names = "ipg", "per";
......@@ -380,7 +380,7 @@ pwm2: pwm@2084000 {
pwm3: pwm@2088000 {
compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
reg = <0x02088000 0x4000>;
interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6UL_CLK_PWM3>,
<&clks IMX6UL_CLK_PWM3>;
clock-names = "ipg", "per";
......@@ -391,7 +391,7 @@ pwm3: pwm@2088000 {
pwm4: pwm@208c000 {
compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
reg = <0x0208c000 0x4000>;
interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6UL_CLK_PWM4>,
<&clks IMX6UL_CLK_PWM4>;
clock-names = "ipg", "per";
......
......@@ -248,8 +248,8 @@ mali: gpu@c0000 {
<GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
......@@ -264,7 +264,6 @@ mali: gpu@c0000 {
clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
clock-names = "bus", "core";
operating-points-v2 = <&gpu_opp_table>;
switch-delay = <0xffff>;
};
};
}; /* end of / */
......
......@@ -163,23 +163,23 @@ gpu_opp_table: gpu-opp-table {
opp-255000000 {
opp-hz = /bits/ 64 <255000000>;
opp-microvolt = <1150000>;
opp-microvolt = <1100000>;
};
opp-364300000 {
opp-hz = /bits/ 64 <364300000>;
opp-microvolt = <1150000>;
opp-microvolt = <1100000>;
};
opp-425000000 {
opp-hz = /bits/ 64 <425000000>;
opp-microvolt = <1150000>;
opp-microvolt = <1100000>;
};
opp-510000000 {
opp-hz = /bits/ 64 <510000000>;
opp-microvolt = <1150000>;
opp-microvolt = <1100000>;
};
opp-637500000 {
opp-hz = /bits/ 64 <637500000>;
opp-microvolt = <1150000>;
opp-microvolt = <1100000>;
turbo-mode;
};
};
......@@ -229,7 +229,6 @@ mali: gpu@c0000 {
clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
clock-names = "bus", "core";
operating-points-v2 = <&gpu_opp_table>;
switch-delay = <0xffff>;
};
};
}; /* end of / */
......
......@@ -430,7 +430,7 @@ static void omap3_prm_reconfigure_io_chain(void)
* registers, and omap3xxx_prm_reconfigure_io_chain() must be called.
* No return value.
*/
static void __init omap3xxx_prm_enable_io_wakeup(void)
static void omap3xxx_prm_enable_io_wakeup(void)
{
if (prm_features & PRM_HAS_IO_WAKEUP)
omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD,
......
......@@ -28,7 +28,7 @@ cpu0: cpu@0 {
enable-method = "psci";
clocks = <&clockgen 1 0>;
next-level-cache = <&l2>;
cpu-idle-states = <&CPU_PH20>;
cpu-idle-states = <&CPU_PW20>;
};
cpu1: cpu@1 {
......@@ -38,7 +38,7 @@ cpu1: cpu@1 {
enable-method = "psci";
clocks = <&clockgen 1 0>;
next-level-cache = <&l2>;
cpu-idle-states = <&CPU_PH20>;
cpu-idle-states = <&CPU_PW20>;
};
l2: l2-cache {
......@@ -53,13 +53,13 @@ idle-states {
*/
entry-method = "arm,psci";
CPU_PH20: cpu-ph20 {
compatible = "arm,idle-state";
idle-state-name = "PH20";
arm,psci-suspend-param = <0x00010000>;
entry-latency-us = <1000>;
exit-latency-us = <1000>;
min-residency-us = <3000>;
CPU_PW20: cpu-pw20 {
compatible = "arm,idle-state";
idle-state-name = "PW20";
arm,psci-suspend-param = <0x0>;
entry-latency-us = <2000>;
exit-latency-us = <2000>;
min-residency-us = <6000>;
};
};
......
......@@ -613,6 +613,7 @@ CONFIG_RTC_DRV_TEGRA=y
CONFIG_RTC_DRV_IMX_SC=m
CONFIG_RTC_DRV_XGENE=y
CONFIG_DMADEVICES=y
CONFIG_FSL_EDMA=y
CONFIG_DMA_BCM2835=m
CONFIG_K3_DMA=y
CONFIG_MV_XOR=y
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment