Merge branch 'for_paulus' of master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc

Documentation/powerpc/booting-without-of.txt

@@ -1334,6 +1334,9 @@ platforms are moved over to use the flattened-device-tree model.
       fsl-usb2-mph compatible controllers.  Either this property or
       "port0" (or both) must be defined for "fsl-usb2-mph" compatible 
       controllers.
+    - dr_mode : indicates the working mode for "fsl-usb2-dr" compatible
+      controllers.  Can be "host", "peripheral", or "otg".  Default to
+      "host" if not defined for backward compatibility.
 
    Recommended properties :
     - interrupts : <a b> where a is the interrupt number and b is a
@@ -1367,6 +1370,7 @@ platforms are moved over to use the flattened-device-tree model.
 		#size-cells = <0>;
 		interrupt-parent = <700>;
 		interrupts = <26 1>;
+		dr_mode = "otg";
 		phy = "ulpi";
 	};
 

arch/powerpc/boot/dts/kuroboxHD.dts

+/*
+ * Device Tree Souce for Buffalo KuroboxHD
+ *
+ * Choose CONFIG_LINKSTATION to build a kernel for KuroboxHD, or use
+ * the default configuration linkstation_defconfig.
+ *
+ * Based on sandpoint.dts
+ *
+ * 2006 (c) G. Liakhovetski <g.liakhovetski@gmx.de>
+ *
+ * This file is licensed under
+ * the terms of the GNU General Public License version 2.  This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+
+XXXX add flash parts, rtc, ??
+
+build with: "dtc -f -I dts -O dtb -o kuroboxHD.dtb -V 16 kuroboxHD.dts"
+
+
+ */
+
+/ {
+	linux,phandle = <1000>;
+	model = "KuroboxHD";
+	compatible = "linkstation";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		linux,phandle = <2000>;
+		#cpus = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,603e { /* Really 8241 */
+			linux,phandle = <2100>;
+			linux,boot-cpu;
+			device_type = "cpu";
+			reg = <0>;
+			clock-frequency = <bebc200>;	/* Fixed by bootwrapper */
+			timebase-frequency = <1743000>; /* Fixed by bootwrapper */
+			bus-frequency = <0>;		/* From bootloader */
+			/* Following required by dtc but not used */
+			i-cache-line-size = <0>;
+			d-cache-line-size = <0>;
+			i-cache-size = <4000>;
+			d-cache-size = <4000>;
+		};
+	};
+
+	memory {
+		linux,phandle = <3000>;
+		device_type = "memory";
+		reg = <00000000 04000000>;
+	};
+
+	soc10x { /* AFAICT need to make soc for 8245's uarts to be defined */
+		linux,phandle = <4000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		#interrupt-cells = <2>;
+		device_type = "soc";
+		compatible = "mpc10x";
+		store-gathering = <0>; /* 0 == off, !0 == on */
+		reg = <80000000 00100000>;
+		ranges = <80000000 80000000 70000000	/* pci mem space */
+			  fc000000 fc000000 00100000	/* EUMB */
+			  fe000000 fe000000 00c00000	/* pci i/o space */
+			  fec00000 fec00000 00300000	/* pci cfg regs */
+			  fef00000 fef00000 00100000>;	/* pci iack */
+
+		i2c@80003000 {
+			linux,phandle = <4300>;
+			device_type = "i2c";
+			compatible = "fsl-i2c";
+			reg = <80003000 1000>;
+			interrupts = <5 2>;
+			interrupt-parent = <4400>;
+		};
+
+		serial@80004500 {
+			linux,phandle = <4511>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <80004500 8>;
+			clock-frequency = <5d08d88>;
+			current-speed = <2580>;
+			interrupts = <9 2>;
+			interrupt-parent = <4400>;
+		};
+
+		serial@80004600 {
+			linux,phandle = <4512>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <80004600 8>;
+			clock-frequency = <5d08d88>;
+			current-speed = <e100>;
+			interrupts = <a 0>;
+			interrupt-parent = <4400>;
+		};
+
+		pic@80040000 {
+			linux,phandle = <4400>;
+			#interrupt-cells = <2>;
+			#address-cells = <0>;
+			device_type = "open-pic";
+			compatible = "chrp,open-pic";
+			interrupt-controller;
+			reg = <80040000 40000>;
+			built-in;
+		};
+
+		pci@fec00000 {
+			linux,phandle = <4500>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			device_type = "pci";
+			compatible = "mpc10x-pci";
+			reg = <fec00000 400000>;
+			ranges = <01000000 0        0 fe000000 0 00c00000
+				  02000000 0 80000000 80000000 0 70000000>;
+			bus-range = <0 ff>;
+			clock-frequency = <7f28155>;
+			interrupt-parent = <4400>;
+			interrupt-map-mask = <f800 0 0 7>;
+			interrupt-map = <
+				/* IDSEL 0x11 - IRQ0 ETH */
+				5800 0 0 1 4400 0 1
+				5800 0 0 2 4400 1 1
+				5800 0 0 3 4400 2 1
+				5800 0 0 4 4400 3 1
+				/* IDSEL 0x12 - IRQ1 IDE0 */
+				6000 0 0 1 4400 1 1
+				6000 0 0 2 4400 2 1
+				6000 0 0 3 4400 3 1
+				6000 0 0 4 4400 0 1
+				/* IDSEL 0x14 - IRQ3 USB2.0 */
+				7000 0 0 1 4400 3 1
+				7000 0 0 2 4400 3 1
+				7000 0 0 3 4400 3 1
+				7000 0 0 4 4400 3 1
+			>;
+		};
+	};
+};

arch/powerpc/boot/dts/mpc8313erdb.dts

+/*
+ * MPC8313E RDB Device Tree Source
+ *
+ * Copyright 2005, 2006, 2007 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/ {
+	model = "MPC8313ERDB";
+	compatible = "MPC83xx";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#cpus = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8313@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <20>;	// 32 bytes
+			i-cache-line-size = <20>;	// 32 bytes
+			d-cache-size = <4000>;		// L1, 16K
+			i-cache-size = <4000>;		// L1, 16K
+			timebase-frequency = <0>;	// from bootloader
+			bus-frequency = <0>;		// from bootloader
+			clock-frequency = <0>;		// from bootloader
+			32-bit;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <00000000 08000000>;	// 128MB at 0
+	};
+
+	soc8313@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		#interrupt-cells = <2>;
+		device_type = "soc";
+		ranges = <0 e0000000 00100000>;
+		reg = <e0000000 00000200>;
+		bus-frequency = <0>;
+
+		wdt@200 {
+			device_type = "watchdog";
+			compatible = "mpc83xx_wdt";
+			reg = <200 100>;
+		};
+
+		i2c@3000 {
+			device_type = "i2c";
+			compatible = "fsl-i2c";
+			reg = <3000 100>;
+			interrupts = <e 8>;
+			interrupt-parent = <700>;
+			dfsrr;
+		};
+
+		i2c@3100 {
+			device_type = "i2c";
+			compatible = "fsl-i2c";
+			reg = <3100 100>;
+			interrupts = <f 8>;
+			interrupt-parent = <700>;
+			dfsrr;
+		};
+
+		spi@7000 {
+			device_type = "spi";
+			compatible = "mpc83xx_spi";
+			reg = <7000 1000>;
+			interrupts = <10 8>;
+			interrupt-parent = <700>;
+			mode = <0>;
+		};
+
+		/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
+		usb@23000 {
+			device_type = "usb";
+			compatible = "fsl-usb2-dr";
+			reg = <23000 1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <700>;
+			interrupts = <26 2>;
+			phy_type = "utmi_wide";
+		};
+
+		mdio@24520 {
+			device_type = "mdio";
+			compatible = "gianfar";
+			reg = <24520 20>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			linux,phandle = <24520>;
+			ethernet-phy@1 {
+				linux,phandle = <2452001>;
+				interrupt-parent = <700>;
+				interrupts = <13 2>;
+				reg = <1>;
+				device_type = "ethernet-phy";
+			};
+			ethernet-phy@4 {
+				linux,phandle = <2452004>;
+				interrupt-parent = <700>;
+				interrupts = <14 2>;
+				reg = <4>;
+				device_type = "ethernet-phy";
+			};
+		};
+
+		ethernet@24000 {
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <24000 1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <25 8 24 8 23 8>;
+			interrupt-parent = <700>;
+			phy-handle = <2452001>;
+		};
+
+		ethernet@25000 {
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <25000 1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <22 8 21 8 20 8>;
+			interrupt-parent = <700>;
+			phy-handle = <2452004>;
+		};
+
+		serial@4500 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <4500 100>;
+			clock-frequency = <0>;
+			interrupts = <9 8>;
+			interrupt-parent = <700>;
+		};
+
+		serial@4600 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <4600 100>;
+			clock-frequency = <0>;
+			interrupts = <a 8>;
+			interrupt-parent = <700>;
+		};
+
+		pci@8500 {
+			interrupt-map-mask = <f800 0 0 7>;
+			interrupt-map = <
+
+					/* IDSEL 0x0E -mini PCI */
+					 7000 0 0 1 700 12 8
+					 7000 0 0 2 700 12 8
+					 7000 0 0 3 700 12 8
+					 7000 0 0 4 700 12 8
+
+					/* IDSEL 0x0F - PCI slot */
+					 7800 0 0 1 700 11 8
+					 7800 0 0 2 700 12 8
+					 7800 0 0 3 700 11 8
+					 7800 0 0 4 700 12 8>;
+			interrupt-parent = <700>;
+			interrupts = <42 8>;
+			bus-range = <0 0>;
+			ranges = <02000000 0 90000000 90000000 0 10000000
+			          42000000 0 80000000 80000000 0 10000000
+			          01000000 0 00000000 e2000000 0 00100000>;
+			clock-frequency = <3f940aa>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			reg = <8500 100>;
+			compatible = "83xx";
+			device_type = "pci";
+		};
+
+		crypto@30000 {
+			device_type = "crypto";
+			model = "SEC2";
+			compatible = "talitos";
+			reg = <30000 7000>;
+			interrupts = <b 8>;
+			interrupt-parent = <700>;
+			/* Rev. 2.2 */
+			num-channels = <1>;
+			channel-fifo-len = <18>;
+			exec-units-mask = <0000004c>;
+			descriptor-types-mask = <0122003f>;
+		};
+
+		/* IPIC
+		 * interrupts cell = <intr #, sense>
+		 * sense values match linux IORESOURCE_IRQ_* defines:
+		 * sense == 8: Level, low assertion
+		 * sense == 2: Edge, high-to-low change
+		 */
+		pic@700 {
+			linux,phandle = <700>;
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <700 100>;
+			built-in;
+			device_type = "ipic";
+		};
+	};
+};

arch/powerpc/boot/dts/mpc8349emds.dts → arch/powerpc/boot/dts/mpc834x_mds.dts

@@ -39,6 +39,11 @@ memory {
 		reg = <00000000 10000000>;	// 256MB at 0
 	};
 
+	bcsr@e2400000 {
+		device_type = "board-control";
+		reg = <e2400000 8000>;
+	};
+
 	soc8349@e0000000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -103,6 +108,7 @@ usb@23000 {
 			#size-cells = <0>;
 			interrupt-parent = <700>;
 			interrupts = <26 2>;
+			dr_mode = "otg";
 			phy_type = "ulpi";
 		};
 

arch/powerpc/configs/linkstation_defconfig

 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20-rc5
-# Mon Jan 22 22:17:58 2007
+# Linux kernel version: 2.6.20-rc6
+# Sun Jan 28 23:13:56 2007
 #
 # CONFIG_PPC64 is not set
 CONFIG_PPC32=y
@@ -58,7 +58,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
 #
 # General setup
 #
-CONFIG_LOCALVERSION="-kuroboxHG"
+CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
@@ -206,7 +206,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
-# CONFIG_SECCOMP is not set
+CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
 
 #
@@ -312,39 +312,40 @@ CONFIG_NF_CONNTRACK=m
 # CONFIG_NF_CT_ACCT is not set
 # CONFIG_NF_CONNTRACK_MARK is not set
 # CONFIG_NF_CONNTRACK_EVENTS is not set
-# CONFIG_NF_CT_PROTO_SCTP is not set
-# CONFIG_NF_CONNTRACK_AMANDA is not set
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CONNTRACK_AMANDA=m
 CONFIG_NF_CONNTRACK_FTP=m
-# CONFIG_NF_CONNTRACK_H323 is not set
+CONFIG_NF_CONNTRACK_H323=m
 CONFIG_NF_CONNTRACK_IRC=m
-# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
-# CONFIG_NF_CONNTRACK_PPTP is not set
-# CONFIG_NF_CONNTRACK_SIP is not set
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SIP=m
 CONFIG_NF_CONNTRACK_TFTP=m
 CONFIG_NETFILTER_XTABLES=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
 # CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-CONFIG_NETFILTER_XT_TARGET_MARK=m
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
 # CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
 # CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
 # CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
 # CONFIG_NETFILTER_XT_MATCH_DCCP is not set
 # CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
 CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
 # CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
 # CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
 # CONFIG_NETFILTER_XT_MATCH_REALM is not set
 # CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-# CONFIG_NETFILTER_XT_MATCH_STATE is not set
+CONFIG_NETFILTER_XT_MATCH_STATE=m
 # CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
 # CONFIG_NETFILTER_XT_MATCH_STRING is not set
 # CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
@@ -359,12 +360,12 @@ CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_IPRANGE=m
 # CONFIG_IP_NF_MATCH_TOS is not set
-# CONFIG_IP_NF_MATCH_RECENT is not set
+CONFIG_IP_NF_MATCH_RECENT=m
 # CONFIG_IP_NF_MATCH_ECN is not set
 # CONFIG_IP_NF_MATCH_AH is not set
 # CONFIG_IP_NF_MATCH_TTL is not set
-# CONFIG_IP_NF_MATCH_OWNER is not set
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
+CONFIG_IP_NF_MATCH_OWNER=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 # CONFIG_IP_NF_TARGET_LOG is not set
@@ -374,16 +375,17 @@ CONFIG_NF_NAT=m
 CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
+# CONFIG_IP_NF_TARGET_NETMAP is not set
+# CONFIG_IP_NF_TARGET_SAME is not set
 # CONFIG_NF_NAT_SNMP_BASIC is not set
+CONFIG_NF_NAT_PROTO_GRE=m
 CONFIG_NF_NAT_FTP=m
 CONFIG_NF_NAT_IRC=m
 CONFIG_NF_NAT_TFTP=m
-# CONFIG_NF_NAT_AMANDA is not set
-# CONFIG_NF_NAT_PPTP is not set
-# CONFIG_NF_NAT_H323 is not set
-# CONFIG_NF_NAT_SIP is not set
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_TOS=m
 CONFIG_IP_NF_TARGET_ECN=m
@@ -472,6 +474,7 @@ CONFIG_MTD_PARTITIONS=y
 # User Modules And Translation Layers
 #
 CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
@@ -518,6 +521,7 @@ CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_PHYSMAP_START=0xffc00000
 CONFIG_MTD_PHYSMAP_LEN=0x400000
 CONFIG_MTD_PHYSMAP_BANKWIDTH=1
+# CONFIG_MTD_PHYSMAP_OF is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
@@ -540,6 +544,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=1
 # NAND Flash Device Drivers
 #
 # CONFIG_MTD_NAND is not set
+# CONFIG_MTD_NAND_CAFE is not set
 
 #
 # OneNAND Flash Device Drivers
@@ -696,7 +701,7 @@ CONFIG_ATA=y
 # CONFIG_PATA_HPT37X is not set
 # CONFIG_PATA_HPT3X2N is not set
 # CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
+CONFIG_PATA_IT821X=y
 # CONFIG_PATA_JMICRON is not set
 # CONFIG_PATA_TRIFLEX is not set
 # CONFIG_PATA_MARVELL is not set
@@ -763,11 +768,33 @@ CONFIG_TUN=m
 #
 # PHY device support
 #
+# CONFIG_PHYLIB is not set
 
 #
 # Ethernet (10 or 100Mbit)
 #
-# CONFIG_NET_ETHERNET is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+
+#
+# Tulip family network device support
+#
+CONFIG_NET_TULIP=y
+# CONFIG_DE2104X is not set
+CONFIG_TULIP=y
+# CONFIG_TULIP_MWI is not set
+CONFIG_TULIP_MMIO=y
+# CONFIG_TULIP_NAPI is not set
+# CONFIG_DE4X5 is not set
+# CONFIG_WINBOND_840 is not set
+# CONFIG_DM9102 is not set
+# CONFIG_ULI526X is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_PCI is not set
 
 #
 # Ethernet (1000 Mbit)
@@ -829,7 +856,8 @@ CONFIG_NET_RADIO=y
 # CONFIG_USB_ZD1201 is not set
 # CONFIG_HOSTAP is not set
 # CONFIG_BCM43XX is not set
-# CONFIG_ZD1211RW is not set
+CONFIG_ZD1211RW=m
+# CONFIG_ZD1211RW_DEBUG is not set
 CONFIG_NET_WIRELESS=y
 
 #
@@ -1098,7 +1126,7 @@ CONFIG_DUMMY_CONSOLE=y
 #
 # HID Devices
 #
-CONFIG_HID=y
+CONFIG_HID=m
 
 #
 # USB support
@@ -1115,7 +1143,6 @@ CONFIG_USB=y
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_BANDWIDTH is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_MULTITHREAD_PROBE is not set
 # CONFIG_USB_OTG is not set
 
 #
@@ -1136,7 +1163,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # USB Device Class drivers
 #
 # CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
+CONFIG_USB_PRINTER=m
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1371,7 +1398,11 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
+CONFIG_XFS_FS=m
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_SECURITY is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
@@ -1461,7 +1492,12 @@ CONFIG_SUNRPC_GSS=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -1495,7 +1531,7 @@ CONFIG_NLS_CODEPAGE_437=m
 # CONFIG_NLS_CODEPAGE_869 is not set
 # CONFIG_NLS_CODEPAGE_936 is not set
 # CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
+CONFIG_NLS_CODEPAGE_932=m
 # CONFIG_NLS_CODEPAGE_949 is not set
 # CONFIG_NLS_CODEPAGE_874 is not set
 # CONFIG_NLS_ISO8859_8 is not set
@@ -1526,12 +1562,14 @@ CONFIG_NLS_UTF8=m
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
+CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=m
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
 CONFIG_PLIST=y
 CONFIG_IOMAP_COPY=y
 

arch/powerpc/configs/mpc834x_mds_defconfig

 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20-rc5
-# Fri Jan 26 00:19:27 2007
+# Linux kernel version: 2.6.20
+# Thu Feb  8 01:00:48 2007
 #
 # CONFIG_PPC64 is not set
 CONFIG_PPC32=y
@@ -34,9 +34,9 @@ CONFIG_DEFAULT_UIMAGE=y
 CONFIG_PPC_83xx=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_86xx is not set
+# CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
-# CONFIG_8xx is not set
 # CONFIG_E200 is not set
 CONFIG_6xx=y
 CONFIG_83xx=y
@@ -128,8 +128,9 @@ CONFIG_PPC_GEN550=y
 #
 # Platform support
 #
+# CONFIG_MPC8313_RDB is not set
 # CONFIG_MPC832x_MDS is not set
-CONFIG_MPC834x_SYS=y
+CONFIG_MPC834x_MDS=y
 # CONFIG_MPC834x_ITX is not set
 # CONFIG_MPC8360E_PB is not set
 CONFIG_MPC834x=y

arch/powerpc/mm/pgtable_32.c

@@ -295,7 +295,7 @@ void __init mapin_ram(void)
 }
 
 /* is x a power of 4? */
-#define is_power_of_4(x)	is_power_of_2(x) && (ffs(x) & 1))
+#define is_power_of_4(x)	is_power_of_2(x) && (ffs(x) & 1)
 
 /*
  * Set up a mapping for a block of I/O.

arch/powerpc/platforms/83xx/Kconfig

@@ -3,7 +3,13 @@ menu "Platform support"
 
 choice
 	prompt "Machine Type"
-	default MPC834x_SYS
+	default MPC834x_MDS
+
+config MPC8313_RDB
+	bool "Freescale MPC8313 RDB"
+	select DEFAULT_UIMAGE
+	help
+	  This option enables support for the MPC8313 RDB board.
 
 config MPC832x_MDS
 	bool "Freescale MPC832x MDS"
@@ -12,13 +18,13 @@ config MPC832x_MDS
 	help
 	  This option enables support for the MPC832x MDS evaluation board.
 
-config MPC834x_SYS
-	bool "Freescale MPC834x SYS"
+config MPC834x_MDS
+	bool "Freescale MPC834x MDS"
 	select DEFAULT_UIMAGE
 	help
-	  This option enables support for the MPC 834x SYS evaluation board.
+	  This option enables support for the MPC 834x MDS evaluation board.
 
-	  Be aware that PCI buses can only function when SYS board is plugged
+	  Be aware that PCI buses can only function when MDS board is plugged
 	  into the PIB (Platform IO Board) board from Freescale which provide
 	  3 PCI slots.  The PIBs PCI initialization is the bootloader's
 	  responsibility.
@@ -41,6 +47,12 @@ config MPC8360E_PB
 
 endchoice
 
+config PPC_MPC831x
+	bool
+	select PPC_UDBG_16550
+	select PPC_INDIRECT_PCI
+	default y if MPC8313_RDB
+
 config PPC_MPC832x
 	bool
 	select PPC_UDBG_16550
@@ -51,7 +63,7 @@ config MPC834x
 	bool
 	select PPC_UDBG_16550
 	select PPC_INDIRECT_PCI
-	default y if MPC834x_SYS || MPC834x_ITX
+	default y if MPC834x_MDS || MPC834x_ITX
 
 config PPC_MPC836x
 	bool

arch/powerpc/platforms/83xx/Makefile

@@ -3,7 +3,8 @@
 #
 obj-y				:= misc.o
 obj-$(CONFIG_PCI)		+= pci.o
-obj-$(CONFIG_MPC834x_SYS)	+= mpc834x_sys.o
+obj-$(CONFIG_MPC8313_RDB)	+= mpc8313_rdb.o
+obj-$(CONFIG_MPC834x_MDS)	+= mpc834x_mds.o
 obj-$(CONFIG_MPC834x_ITX)	+= mpc834x_itx.o
 obj-$(CONFIG_MPC8360E_PB)	+= mpc8360e_pb.o
 obj-$(CONFIG_MPC832x_MDS)	+= mpc832x_mds.o

arch/powerpc/platforms/83xx/mpc8313_rdb.c

+/*
+ * arch/powerpc/platforms/83xx/mpc8313_rdb.c
+ *
+ * Description: MPC8313x RDB board specific routines.
+ * This file is based on mpc834x_sys.c
+ * Author: Lo Wlison <r43300@freescale.com>
+ *
+ * Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/pci.h>
+
+#include <asm/time.h>
+#include <asm/ipic.h>
+#include <asm/udbg.h>
+
+#include "mpc83xx.h"
+
+#undef DEBUG
+#ifdef DEBUG
+#define DBG(fmt...) udbg_printf(fmt)
+#else
+#define DBG(fmt...)
+#endif
+
+#ifndef CONFIG_PCI
+unsigned long isa_io_base = 0;
+unsigned long isa_mem_base = 0;
+#endif
+
+/* ************************************************************************
+ *
+ * Setup the architecture
+ *
+ */
+static void __init mpc8313_rdb_setup_arch(void)
+{
+	struct device_node *np;
+
+	if (ppc_md.progress)
+		ppc_md.progress("mpc8313_rdb_setup_arch()", 0);
+
+#ifdef CONFIG_PCI
+	for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
+		add_bridge(np);
+
+	ppc_md.pci_exclude_device = mpc83xx_exclude_device;
+#endif
+}
+
+void __init mpc8313_rdb_init_IRQ(void)
+{
+	struct device_node *np;
+
+	np = of_find_node_by_type(NULL, "ipic");
+	if (!np)
+		return;
+
+	ipic_init(np, 0);
+
+	/* Initialize the default interrupt mapping priorities,
+	 * in case the boot rom changed something on us.
+	 */
+	ipic_set_default_priority();
+}
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+static int __init mpc8313_rdb_probe(void)
+{
+	char *model = of_get_flat_dt_prop(of_get_flat_dt_root(),
+					  "model", NULL);
+	if (model == NULL)
+		return 0;
+	if (strcmp(model, "MPC8313ERDB"))
+		return 0;
+
+	DBG("MPC8313 RDB found\n");
+
+	return 1;
+}
+
+define_machine(mpc8313_rdb) {
+	.name			= "MPC8313 RDB",
+	.probe			= mpc8313_rdb_probe,
+	.setup_arch		= mpc8313_rdb_setup_arch,
+	.init_IRQ		= mpc8313_rdb_init_IRQ,
+	.get_irq		= ipic_get_irq,
+	.restart		= mpc83xx_restart,
+	.time_init		= mpc83xx_time_init,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= udbg_progress,
+};

arch/powerpc/platforms/83xx/mpc834x_itx.c

@@ -38,8 +38,6 @@
 
 #include "mpc83xx.h"
 
-#include <platforms/83xx/mpc834x_sys.h>
-
 #ifndef CONFIG_PCI
 unsigned long isa_io_base = 0;
 unsigned long isa_mem_base = 0;

arch/powerpc/platforms/83xx/mpc834x_sys.c → arch/powerpc/platforms/83xx/mpc834x_mds.c

 /*
- * arch/powerpc/platforms/83xx/mpc834x_sys.c
+ * arch/powerpc/platforms/83xx/mpc834x_mds.c
  *
- * MPC834x SYS board specific routines
+ * MPC834x MDS board specific routines
  *
  * Maintainer: Kumar Gala <galak@kernel.crashing.org>
  *
@@ -43,17 +43,87 @@ unsigned long isa_io_base = 0;
 unsigned long isa_mem_base = 0;
 #endif
 
+#define BCSR5_INT_USB		0x02
+/* Note: This is only for PB, not for PB+PIB
+ * On PB only port0 is connected using ULPI */
+static int mpc834x_usb_cfg(void)
+{
+	unsigned long sccr, sicrl;
+	void __iomem *immap;
+	void __iomem *bcsr_regs = NULL;
+	u8 bcsr5;
+	struct device_node *np = NULL;
+	int port0_is_dr = 0;
+
+	if ((np = of_find_compatible_node(np, "usb", "fsl-usb2-dr")) != NULL)
+		port0_is_dr = 1;
+	if ((np = of_find_compatible_node(np, "usb", "fsl-usb2-mph")) != NULL){
+		if (port0_is_dr) {
+			printk(KERN_WARNING
+				"There is only one USB port on PB board! \n");
+			return -1;
+		} else if (!port0_is_dr)
+			/* No usb port enabled */
+			return -1;
+	}
+
+	immap = ioremap(get_immrbase(), 0x1000);
+	if (!immap)
+		return -1;
+
+	/* Configure clock */
+	sccr = in_be32(immap + MPC83XX_SCCR_OFFS);
+	if (port0_is_dr)
+		sccr |= MPC83XX_SCCR_USB_DRCM_11;  /* 1:3 */
+	else
+		sccr |= MPC83XX_SCCR_USB_MPHCM_11; /* 1:3 */
+	out_be32(immap + MPC83XX_SCCR_OFFS, sccr);
+
+	/* Configure Pin */
+	sicrl = in_be32(immap + MPC83XX_SICRL_OFFS);
+	/* set port0 only */
+	if (port0_is_dr)
+		sicrl |= MPC83XX_SICRL_USB0;
+	else
+		sicrl &= ~(MPC83XX_SICRL_USB0);
+	out_be32(immap + MPC83XX_SICRL_OFFS, sicrl);
+
+	iounmap(immap);
+
+	/* Map BCSR area */
+	np = of_find_node_by_name(NULL, "bcsr");
+	if (np != 0) {
+		struct resource res;
+
+		of_address_to_resource(np, 0, &res);
+		bcsr_regs = ioremap(res.start, res.end - res.start + 1);
+		of_node_put(np);
+	}
+	if (!bcsr_regs)
+		return -1;
+
+	/*
+	 * if MDS board is plug into PIB board,
+	 * force to use the PHY on MDS board
+	 */
+	bcsr5 = in_8(bcsr_regs + 5);
+	if (!(bcsr5 & BCSR5_INT_USB))
+		out_8(bcsr_regs + 5, (bcsr5 | BCSR5_INT_USB));
+	iounmap(bcsr_regs);
+	return 0;
+}
+
 /* ************************************************************************
  *
  * Setup the architecture
  *
  */
-static void __init mpc834x_sys_setup_arch(void)
+static void __init mpc834x_mds_setup_arch(void)
 {
 	struct device_node *np;
 
 	if (ppc_md.progress)
-		ppc_md.progress("mpc834x_sys_setup_arch()", 0);
+		ppc_md.progress("mpc834x_mds_setup_arch()", 0);
 
 	np = of_find_node_by_type(NULL, "cpu");
 	if (np != 0) {
@@ -65,6 +135,7 @@ static void __init mpc834x_sys_setup_arch(void)
 			loops_per_jiffy = 50000000 / HZ;
 		of_node_put(np);
 	}
+
 #ifdef CONFIG_PCI
 	for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
 		add_bridge(np);
@@ -72,6 +143,8 @@ static void __init mpc834x_sys_setup_arch(void)
 	ppc_md.pci_exclude_device = mpc83xx_exclude_device;
 #endif
 
+	mpc834x_usb_cfg();
+
 #ifdef  CONFIG_ROOT_NFS
 	ROOT_DEV = Root_NFS;
 #else
@@ -79,7 +152,7 @@ static void __init mpc834x_sys_setup_arch(void)
 #endif
 }
 
-static void __init mpc834x_sys_init_IRQ(void)
+static void __init mpc834x_mds_init_IRQ(void)
 {
 	struct device_node *np;
 
@@ -119,7 +192,7 @@ late_initcall(mpc834x_rtc_hookup);
 /*
  * Called very early, MMU is off, device-tree isn't unflattened
  */
-static int __init mpc834x_sys_probe(void)
+static int __init mpc834x_mds_probe(void)
 {
 	/* We always match for now, eventually we should look at the flat
 	   dev tree to ensure this is the board we are suppose to run on
@@ -127,11 +200,11 @@ static int __init mpc834x_sys_probe(void)
 	return 1;
 }
 
-define_machine(mpc834x_sys) {
-	.name			= "MPC834x SYS",
-	.probe			= mpc834x_sys_probe,
-	.setup_arch		= mpc834x_sys_setup_arch,
-	.init_IRQ		= mpc834x_sys_init_IRQ,
+define_machine(mpc834x_mds) {
+	.name			= "MPC834x MDS",
+	.probe			= mpc834x_mds_probe,
+	.setup_arch		= mpc834x_mds_setup_arch,
+	.init_IRQ		= mpc834x_mds_init_IRQ,
 	.get_irq		= ipic_get_irq,
 	.restart		= mpc83xx_restart,
 	.time_init		= mpc83xx_time_init,

arch/powerpc/platforms/83xx/mpc834x_sys.h

-/*
- * arch/powerpc/platforms/83xx/mpc834x_sys.h
- *
- * MPC834X SYS common board definitions
- *
- * Maintainer: Kumar Gala <galak@kernel.crashing.org>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-#ifndef __MACH_MPC83XX_SYS_H__
-#define __MACH_MPC83XX_SYS_H__
-
-#define PIRQA	MPC83xx_IRQ_EXT4
-#define PIRQB	MPC83xx_IRQ_EXT5
-#define PIRQC	MPC83xx_IRQ_EXT6
-#define PIRQD	MPC83xx_IRQ_EXT7
-
-#endif				/* __MACH_MPC83XX_SYS_H__ */

arch/powerpc/platforms/83xx/mpc83xx.h

@@ -4,6 +4,24 @@
 #include <linux/init.h>
 #include <linux/device.h>
 
+/* System Clock Control Register */
+#define MPC83XX_SCCR_OFFS          0xA08
+#define MPC83XX_SCCR_USB_MPHCM_11  0x00c00000
+#define MPC83XX_SCCR_USB_MPHCM_01  0x00400000
+#define MPC83XX_SCCR_USB_MPHCM_10  0x00800000
+#define MPC83XX_SCCR_USB_DRCM_11   0x00300000
+#define MPC83XX_SCCR_USB_DRCM_01   0x00100000
+#define MPC83XX_SCCR_USB_DRCM_10   0x00200000
+
+/* system i/o configuration register low */
+#define MPC83XX_SICRL_OFFS         0x114
+#define MPC83XX_SICRL_USB0         0x40000000
+#define MPC83XX_SICRL_USB1         0x20000000
+
+/* system i/o configuration register high */
+#define MPC83XX_SICRH_OFFS         0x118
+#define MPC83XX_SICRH_USB_UTMI     0x00020000
+
 /*
  * Declaration for the various functions exported by the
  * mpc83xx_* files. Mostly for use by mpc83xx_setup

arch/powerpc/platforms/85xx/mpc85xx_ads.c

@@ -45,8 +45,7 @@ unsigned long isa_mem_base = 0;
 #endif
 
 #ifdef CONFIG_PCI
-int
-mpc85xx_exclude_device(u_char bus, u_char devfn)
+static int mpc85xx_exclude_device(u_char bus, u_char devfn)
 {
 	if (bus == 0 && PCI_SLOT(devfn) == 0)
 		return PCIBIOS_DEVICE_NOT_FOUND;
@@ -69,7 +68,7 @@ static void cpm2_cascade(unsigned int irq, struct irq_desc *desc)
 
 #endif /* CONFIG_CPM2 */
 
-void __init mpc85xx_ads_pic_init(void)
+static void __init mpc85xx_ads_pic_init(void)
 {
 	struct mpic *mpic;
 	struct resource r;
@@ -254,7 +253,7 @@ static void __init mpc85xx_ads_setup_arch(void)
 #endif
 }
 
-void mpc85xx_ads_show_cpuinfo(struct seq_file *m)
+static void mpc85xx_ads_show_cpuinfo(struct seq_file *m)
 {
 	uint pvid, svid, phid1;
 	uint memsize = total_memory;

arch/powerpc/platforms/85xx/mpc85xx_cds.c

@@ -56,7 +56,6 @@ unsigned long isa_mem_base = 0;
 static int cds_pci_slot = 2;
 static volatile u8 *cadmus;
 
-
 #ifdef CONFIG_PCI
 
 #define ARCADIA_HOST_BRIDGE_IDSEL	17
@@ -64,8 +63,7 @@ static volatile u8 *cadmus;
 
 extern int mpc85xx_pci2_busno;
 
-int
-mpc85xx_exclude_device(u_char bus, u_char devfn)
+static int mpc85xx_exclude_device(u_char bus, u_char devfn)
 {
 	if (bus == 0 && PCI_SLOT(devfn) == 0)
 		return PCIBIOS_DEVICE_NOT_FOUND;
@@ -81,8 +79,7 @@ mpc85xx_exclude_device(u_char bus, u_char devfn)
 		return PCIBIOS_SUCCESSFUL;
 }
 
-void __init
-mpc85xx_cds_pcibios_fixup(void)
+static void __init mpc85xx_cds_pcibios_fixup(void)
 {
 	struct pci_dev *dev;
 	u_char		c;
@@ -144,7 +141,7 @@ static void mpc85xx_8259_cascade(unsigned int irq, struct irq_desc *desc)
 #endif /* PPC_I8259 */
 #endif /* CONFIG_PCI */
 
-void __init mpc85xx_cds_pic_init(void)
+static void __init mpc85xx_cds_pic_init(void)
 {
 	struct mpic *mpic;
 	struct resource r;
@@ -224,12 +221,10 @@ void __init mpc85xx_cds_pic_init(void)
 #endif /* CONFIG_PPC_I8259 */
 }
 
-
 /*
  * Setup the architecture
  */
-static void __init
-mpc85xx_cds_setup_arch(void)
+static void __init mpc85xx_cds_setup_arch(void)
 {
 	struct device_node *cpu;
 #ifdef CONFIG_PCI
@@ -276,9 +271,7 @@ mpc85xx_cds_setup_arch(void)
 #endif
 }
 
-
-void
-mpc85xx_cds_show_cpuinfo(struct seq_file *m)
+static void mpc85xx_cds_show_cpuinfo(struct seq_file *m)
 {
 	uint pvid, svid, phid1;
 	uint memsize = total_memory;

arch/powerpc/platforms/embedded6xx/linkstation.c

@@ -13,7 +13,6 @@
 #include <linux/kernel.h>
 #include <linux/pci.h>
 #include <linux/initrd.h>
-#include <linux/root_dev.h>
 #include <linux/mtd/physmap.h>
 
 #include <asm/time.h>
@@ -91,17 +90,6 @@ static void __init linkstation_setup_arch(void)
 			       ARRAY_SIZE(linkstation_physmap_partitions));
 #endif
 
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#endif
-#ifdef	CONFIG_ROOT_NFS
-		ROOT_DEV = Root_NFS;
-#else
-		ROOT_DEV = Root_HDA1;
-#endif
-
 	/* Lookup PCI host bridges */
 	for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
 		add_bridge(np);

arch/powerpc/sysdev/fsl_soc.c

@@ -441,7 +441,8 @@ static int __init fsl_usb_of_init(void)
 {
 	struct device_node *np;
 	unsigned int i;
-	struct platform_device *usb_dev_mph = NULL, *usb_dev_dr = NULL;
+	struct platform_device *usb_dev_mph = NULL, *usb_dev_dr_host = NULL,
+		*usb_dev_dr_client = NULL;
 	int ret;
 
 	for (np = NULL, i = 0;
@@ -507,33 +508,72 @@ static int __init fsl_usb_of_init(void)
 
 		of_irq_to_resource(np, 0, &r[1]);
 
-		usb_dev_dr =
-		    platform_device_register_simple("fsl-ehci", i, r, 2);
-		if (IS_ERR(usb_dev_dr)) {
-			ret = PTR_ERR(usb_dev_dr);
+		prop = get_property(np, "dr_mode", NULL);
+
+		if (!prop || !strcmp(prop, "host")) {
+			usb_data.operating_mode = FSL_USB2_DR_HOST;
+			usb_dev_dr_host = platform_device_register_simple(
+					"fsl-ehci", i, r, 2);
+			if (IS_ERR(usb_dev_dr_host)) {
+				ret = PTR_ERR(usb_dev_dr_host);
+				goto err;
+			}
+		} else if (prop && !strcmp(prop, "peripheral")) {
+			usb_data.operating_mode = FSL_USB2_DR_DEVICE;
+			usb_dev_dr_client = platform_device_register_simple(
+					"fsl-usb2-udc", i, r, 2);
+			if (IS_ERR(usb_dev_dr_client)) {
+				ret = PTR_ERR(usb_dev_dr_client);
+				goto err;
+			}
+		} else if (prop && !strcmp(prop, "otg")) {
+			usb_data.operating_mode = FSL_USB2_DR_OTG;
+			usb_dev_dr_host = platform_device_register_simple(
+					"fsl-ehci", i, r, 2);
+			if (IS_ERR(usb_dev_dr_host)) {
+				ret = PTR_ERR(usb_dev_dr_host);
+				goto err;
+			}
+			usb_dev_dr_client = platform_device_register_simple(
+					"fsl-usb2-udc", i, r, 2);
+			if (IS_ERR(usb_dev_dr_client)) {
+				ret = PTR_ERR(usb_dev_dr_client);
+				goto err;
+			}
+		} else {
+			ret = -EINVAL;
 			goto err;
 		}
 
-		usb_dev_dr->dev.coherent_dma_mask = 0xffffffffUL;
-		usb_dev_dr->dev.dma_mask = &usb_dev_dr->dev.coherent_dma_mask;
-
-		usb_data.operating_mode = FSL_USB2_DR_HOST;
-
 		prop = get_property(np, "phy_type", NULL);
 		usb_data.phy_mode = determine_usb_phy(prop);
 
-		ret =
-		    platform_device_add_data(usb_dev_dr, &usb_data,
-					     sizeof(struct
-						    fsl_usb2_platform_data));
-		if (ret)
-			goto unreg_dr;
+		if (usb_dev_dr_host) {
+			usb_dev_dr_host->dev.coherent_dma_mask = 0xffffffffUL;
+			usb_dev_dr_host->dev.dma_mask = &usb_dev_dr_host->
+				dev.coherent_dma_mask;
+			if ((ret = platform_device_add_data(usb_dev_dr_host,
+						&usb_data, sizeof(struct
+						fsl_usb2_platform_data))))
+				goto unreg_dr;
+		}
+		if (usb_dev_dr_client) {
+			usb_dev_dr_client->dev.coherent_dma_mask = 0xffffffffUL;
+			usb_dev_dr_client->dev.dma_mask = &usb_dev_dr_client->
+				dev.coherent_dma_mask;
+			if ((ret = platform_device_add_data(usb_dev_dr_client,
+						&usb_data, sizeof(struct
+						fsl_usb2_platform_data))))
+				goto unreg_dr;
+		}
 	}
 	return 0;
 
 unreg_dr:
-	if (usb_dev_dr)
-		platform_device_unregister(usb_dev_dr);
+	if (usb_dev_dr_host)
+		platform_device_unregister(usb_dev_dr_host);
+	if (usb_dev_dr_client)
+		platform_device_unregister(usb_dev_dr_client);
 unreg_mph:
 	if (usb_dev_mph)
 		platform_device_unregister(usb_dev_mph);
@@ -699,7 +739,7 @@ static int __init fs_enet_of_init(void)
 				if (ret)
 					goto unreg;
 			}
-			
+
 			of_node_put(phy);
 			of_node_put(mdio);
 

arch/powerpc/sysdev/qe_lib/ucc_slow.c

@@ -179,7 +179,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
 	uccs->us_info = us_info;
 	uccs->saved_uccm = 0;
 	uccs->p_rx_frame = 0;
-	uccs->us_regs = us_info->us_regs;
+	uccs->us_regs = us_info->regs;
 	us_regs = uccs->us_regs;
 	uccs->p_ucce = (u16 *) & (us_regs->ucce);
 	uccs->p_uccm = (u16 *) & (us_regs->uccm);
@@ -206,7 +206,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
 	uccs->us_pram = qe_muram_addr(uccs->us_pram_offset);
 
 	/* Init Guemr register */
-	if ((ret = ucc_init_guemr((struct ucc_common *) (us_info->us_regs)))) {
+	if ((ret = ucc_init_guemr((struct ucc_common *) (us_info->regs)))) {
 		uccs_err("ucc_slow_init: Could not init the guemr register.");
 		ucc_slow_free(uccs);
 		return ret;
@@ -214,7 +214,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
 
 	/* Set UCC to slow type */
 	if ((ret = ucc_set_type(us_info->ucc_num,
-				(struct ucc_common *) (us_info->us_regs),
+				(struct ucc_common *) (us_info->regs),
 				UCC_SPEED_TYPE_SLOW))) {
 		uccs_err("ucc_slow_init: Could not init the guemr register.");
 		ucc_slow_free(uccs);

arch/ppc/kernel/ppc_ksyms.c

@@ -271,7 +271,7 @@ EXPORT_SYMBOL(mmu_hash_lock); /* For MOL */
 extern long *intercept_table;
 EXPORT_SYMBOL(intercept_table);
 #endif /* CONFIG_PPC_STD_MMU */
-#if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
+#ifdef CONFIG_PPC_DCR_NATIVE
 EXPORT_SYMBOL(__mtdcr);
 EXPORT_SYMBOL(__mfdcr);
 #endif

arch/ppc/mm/pgtable.c

@@ -314,7 +314,7 @@ void __init mapin_ram(void)
 }
 
 /* is x a power of 4? */
-#define is_power_of_4(x)	is_power_of_2(x) && (ffs(x) & 1))
+#define is_power_of_4(x)	is_power_of_2(x) && (ffs(x) & 1)
 
 /*
  * Set up a mapping for a block of I/O.

include/asm-powerpc/ucc_slow.h

@@ -150,7 +150,7 @@ struct ucc_slow_info {
 	int ucc_num;
 	enum qe_clock rx_clock;
 	enum qe_clock tx_clock;
-	struct ucc_slow *us_regs;
+	struct ucc_slow *regs;
 	int irq;
 	u16 uccm_mask;
 	int data_mem_part;