Merge tag 'omap-gpmc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC/OMAP GPMC driver cleanup and move from Arnd Bergmann:
 "The GPMC driver has traditionally been considered a part of the OMAP
  platform code and tightly interweaved with some of the boards.

  With this cleanup, it has finally come to the point where it makes
  sense to move it out of arch/arm into drivers/memory, where we already
  have other drivers for similar hardware.  The cleanups are still
  ongoing, with the goal of eventually having a standalone driver that
  does not require an interface to architecture code.

  This is a separate branch because of dependencies on multiple other
  branches, and to keep the drivers changes separate from the normal
  cleanups"

* tag 'omap-gpmc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  memory: gpmc: Move omap gpmc code to live under drivers
  ARM: OMAP2+: Move GPMC initcall to devices.c
  ARM: OMAP2+: Prepare to move GPMC to drivers by platform data header
  ARM: OMAP2+: Remove unnecesary include in GPMC driver
  ARM: OMAP2+: Drop board file for 3430sdp
  ARM: OMAP2+: Drop board file for ti8168evm
  ARM: OMAP2+: Drop legacy code for gpmc-smc91x.c
  ARM: OMAP2+: Require proper GPMC timings for devices
  ARM: OMAP2+: Show bootloader GPMC timings to allow configuring the .dts file
  ARM: OMAP2+: Fix support for multiple devices on a GPMC chip select
  ARM: OMAP2+: gpmc: Sanity check GPMC fck on probe
  ARM: OMAP2+: gpmc: Keep Chip Select disabled while configuring it
  ARM: OMAP2+: gpmc: Always enable A26-A11 for non NAND devices
  ARM: OMAP2+: gpmc: Error out if timings fail in gpmc_probe_generic_child()
  ARM: OMAP2+: gpmc: Print error message in set_gpmc_timing_reg()

MAINTAINERS

@@ -6702,6 +6702,14 @@ L:	linux-omap@vger.kernel.org
 S:	Maintained
 F:	sound/soc/omap/
 
+OMAP GENERAL PURPOSE MEMORY CONTROLLER SUPPORT
+M:	Roger Quadros <rogerq@ti.com>
+M:	Tony Lindgren <tony@atomide.com>
+L:	linux-omap@vger.kernel.org
+S:	Maintained
+F:	drivers/memory/omap-gpmc.c
+F:	arch/arm/mach-omap2/*gpmc*
+
 OMAP FRAMEBUFFER SUPPORT
 M:	Tomi Valkeinen <tomi.valkeinen@ti.com>
 L:	linux-fbdev@vger.kernel.org

arch/arm/mach-omap2/Kconfig

@@ -79,7 +79,9 @@ config ARCH_OMAP2PLUS
 	select CLKSRC_MMIO
 	select GENERIC_IRQ_CHIP
 	select MACH_OMAP_GENERIC
+	select MEMORY
 	select OMAP_DM_TIMER
+	select OMAP_GPMC
 	select PINCTRL
 	select SOC_BUS
 	select TI_PRIV_EDMA
@@ -235,12 +237,6 @@ config MACH_TOUCHBOOK
 	default y
 	select OMAP_PACKAGE_CBB
 
-config MACH_OMAP_3430SDP
-	bool "OMAP 3430 SDP board"
-	depends on ARCH_OMAP3
-	default y
-	select OMAP_PACKAGE_CBB
-
 config MACH_NOKIA_N810
        bool
 
@@ -282,16 +278,6 @@ config MACH_SBC3530
 	default y
 	select OMAP_PACKAGE_CUS
 
-config MACH_TI8168EVM
-	bool "TI8168 Evaluation Module"
-	depends on SOC_TI81XX
-	default y
-
-config MACH_TI8148EVM
-	bool "TI8148 Evaluation Module"
-	depends on SOC_TI81XX
-	default y
-
 config OMAP3_EMU
 	bool "OMAP3 debugging peripherals"
 	depends on ARCH_OMAP3

arch/arm/mach-omap2/Makefile

@@ -6,7 +6,7 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \
 	-I$(srctree)/arch/arm/plat-omap/include
 
 # Common support
-obj-y := id.o io.o control.o mux.o devices.o fb.o serial.o gpmc.o timer.o pm.o \
+obj-y := id.o io.o control.o mux.o devices.o fb.o serial.o timer.o pm.o \
 	 common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o \
 	 omap_device.o sram.o drm.o
 
@@ -246,7 +246,6 @@ obj-$(CONFIG_MACH_OMAP3530_LV_SOM)      += board-omap3logic.o
 obj-$(CONFIG_MACH_OMAP3_TORPEDO)        += board-omap3logic.o
 obj-$(CONFIG_MACH_OVERO)		+= board-overo.o
 obj-$(CONFIG_MACH_OMAP3_PANDORA)	+= board-omap3pandora.o
-obj-$(CONFIG_MACH_OMAP_3430SDP)		+= board-3430sdp.o
 obj-$(CONFIG_MACH_NOKIA_N8X0)		+= board-n8x0.o
 obj-$(CONFIG_MACH_NOKIA_RX51)		+= board-rx51.o sdram-nokia.o
 obj-$(CONFIG_MACH_NOKIA_RX51)		+= board-rx51-peripherals.o
@@ -260,8 +259,6 @@ obj-$(CONFIG_MACH_OMAP3517EVM)		+= board-am3517evm.o
 obj-$(CONFIG_MACH_CRANEBOARD)		+= board-am3517crane.o
 
 obj-$(CONFIG_MACH_SBC3530)		+= board-omap3stalker.o
-obj-$(CONFIG_MACH_TI8168EVM)		+= board-ti8168evm.o
-obj-$(CONFIG_MACH_TI8148EVM)		+= board-ti8168evm.o
 
 # Platform specific device init code
 
@@ -284,9 +281,6 @@ obj-y					+= $(onenand-m) $(onenand-y)
 nand-$(CONFIG_MTD_NAND_OMAP2)		:= gpmc-nand.o
 obj-y					+= $(nand-m) $(nand-y)
 
-smc91x-$(CONFIG_SMC91X)			:= gpmc-smc91x.o
-obj-y					+= $(smc91x-m) $(smc91x-y)
-
 smsc911x-$(CONFIG_SMSC911X)		:= gpmc-smsc911x.o
 obj-y					+= $(smsc911x-m) $(smsc911x-y)
 ifneq ($(CONFIG_HWSPINLOCK_OMAP),)

arch/arm/mach-omap2/board-am3517crane.c

@@ -24,6 +24,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
+#include <linux/omap-gpmc.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>

arch/arm/mach-omap2/board-cm-t35.c

@@ -25,6 +25,7 @@
 #include <linux/input/matrix_keypad.h>
 #include <linux/delay.h>
 #include <linux/gpio.h>
+#include <linux/omap-gpmc.h>
 #include <linux/platform_data/gpio-omap.h>
 
 #include <linux/platform_data/at24.h>
@@ -51,8 +52,6 @@
 #include "sdram-micron-mt46h32m32lf-6.h"
 #include "hsmmc.h"
 #include "common-board-devices.h"
-#include "gpmc.h"
-#include "gpmc-nand.h"
 
 #define CM_T35_GPIO_PENDOWN		57
 #define SB_T35_USB_HUB_RESET_GPIO	167

arch/arm/mach-omap2/board-cm-t3517.c

@@ -28,6 +28,7 @@
 #include <linux/delay.h>
 #include <linux/gpio.h>
 #include <linux/leds.h>
+#include <linux/omap-gpmc.h>
 #include <linux/rtc-v3020.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
@@ -41,7 +42,6 @@
 
 #include "common.h"
 #include <linux/platform_data/mtd-nand-omap2.h>
-#include "gpmc.h"
 
 #include "am35xx.h"
 
@@ -50,7 +50,6 @@
 #include "hsmmc.h"
 #include "common-board-devices.h"
 #include "am35xx-emac.h"
-#include "gpmc-nand.h"
 
 #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
 static struct gpio_led cm_t3517_leds[] = {

arch/arm/mach-omap2/board-flash.c

@@ -13,6 +13,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/omap-gpmc.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/physmap.h>
 #include <linux/io.h>
@@ -23,8 +24,6 @@
 #include "soc.h"
 #include "common.h"
 #include "board-flash.h"
-#include "gpmc-onenand.h"
-#include "gpmc-nand.h"
 
 #define REG_FPGA_REV			0x10
 #define REG_FPGA_DIP_SWITCH_INPUT2	0x60

arch/arm/mach-omap2/board-flash.h

@@ -12,7 +12,6 @@
  */
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
-#include "gpmc.h"
 
 #define PDC_NOR		1
 #define PDC_NAND	2

arch/arm/mach-omap2/board-n8x0.c

@@ -23,7 +23,6 @@
 #include <linux/usb/musb.h>
 #include <linux/mmc/host.h>
 #include <linux/platform_data/spi-omap2-mcspi.h>
-#include <linux/platform_data/mtd-onenand-omap2.h>
 #include <linux/platform_data/mmc-omap.h>
 #include <linux/mfd/menelaus.h>
 #include <sound/tlv320aic3x.h>
@@ -34,7 +33,6 @@
 #include "common.h"
 #include "mmc.h"
 #include "soc.h"
-#include "gpmc-onenand.h"
 #include "common-board-devices.h"
 
 #define TUSB6010_ASYNC_CS	1

arch/arm/mach-omap2/board-omap3pandora.c

@@ -24,6 +24,7 @@
 #include <linux/spi/spi.h>
 #include <linux/regulator/machine.h>
 #include <linux/i2c/twl.h>
+#include <linux/omap-gpmc.h>
 #include <linux/wl12xx.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/nand.h>
@@ -51,7 +52,6 @@
 #include "sdram-micron-mt46h32m32lf-6.h"
 #include "hsmmc.h"
 #include "common-board-devices.h"
-#include "gpmc-nand.h"
 
 #define PANDORA_WIFI_IRQ_GPIO		21
 #define PANDORA_WIFI_NRESET_GPIO	23

arch/arm/mach-omap2/board-rx51-peripherals.c

@@ -23,6 +23,7 @@
 #include <linux/regulator/machine.h>
 #include <linux/gpio.h>
 #include <linux/gpio_keys.h>
+#include <linux/omap-gpmc.h>
 #include <linux/mmc/host.h>
 #include <linux/power/isp1704_charger.h>
 #include <linux/platform_data/spi-omap2-mcspi.h>
@@ -32,7 +33,6 @@
 
 #include "common.h"
 #include <linux/omap-dma.h>
-#include "gpmc-smc91x.h"
 
 #include "board-rx51.h"
 
@@ -55,8 +55,6 @@
 #include "omap-pm.h"
 #include "hsmmc.h"
 #include "common-board-devices.h"
-#include "gpmc.h"
-#include "gpmc-onenand.h"
 #include "soc.h"
 #include "omap-secure.h"
 
@@ -1144,33 +1142,6 @@ static struct omap_onenand_platform_data board_onenand_data[] = {
 };
 #endif
 
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
-
-static struct omap_smc91x_platform_data board_smc91x_data = {
-	.cs		= 1,
-	.gpio_irq	= 54,
-	.gpio_pwrdwn	= 86,
-	.gpio_reset	= 164,
-	.flags		= GPMC_TIMINGS_SMC91C96 | IORESOURCE_IRQ_HIGHLEVEL,
-};
-
-static void __init board_smc91x_init(void)
-{
-	omap_mux_init_gpio(54, OMAP_PIN_INPUT_PULLDOWN);
-	omap_mux_init_gpio(86, OMAP_PIN_OUTPUT);
-	omap_mux_init_gpio(164, OMAP_PIN_OUTPUT);
-
-	gpmc_smc91x_init(&board_smc91x_data);
-}
-
-#else
-
-static inline void board_smc91x_init(void)
-{
-}
-
-#endif
-
 static struct gpio rx51_wl1251_gpios[] __initdata = {
 	{ RX51_WL1251_IRQ_GPIO,	  GPIOF_IN,		"wl1251 irq"	},
 };
@@ -1301,7 +1272,6 @@ void __init rx51_peripherals_init(void)
 	rx51_i2c_init();
 	regulator_has_full_constraints();
 	gpmc_onenand_init(board_onenand_data);
-	board_smc91x_init();
 	rx51_add_gpio_keys();
 	rx51_init_wl1251();
 	rx51_init_tsc2005();

arch/arm/mach-omap2/board-ti8168evm.c

-/*
- * Code for TI8168/TI8148 EVM.
- *
- * Copyright (C) 2010 Texas Instruments, Inc. - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/usb/musb.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "common.h"
-
-static struct omap_musb_board_data musb_board_data = {
-	.set_phy_power	= ti81xx_musb_phy_power,
-	.interface_type	= MUSB_INTERFACE_ULPI,
-	.mode           = MUSB_OTG,
-	.power		= 500,
-};
-
-static void __init ti81xx_evm_init(void)
-{
-	omap_serial_init();
-	omap_sdrc_init(NULL, NULL);
-	usb_musb_init(&musb_board_data);
-}
-
-MACHINE_START(TI8168EVM, "ti8168evm")
-	/* Maintainer: Texas Instruments */
-	.atag_offset	= 0x100,
-	.map_io		= ti81xx_map_io,
-	.init_early	= ti81xx_init_early,
-	.init_irq	= ti81xx_init_irq,
-	.init_time	= omap3_sync32k_timer_init,
-	.init_machine	= ti81xx_evm_init,
-	.init_late	= ti81xx_init_late,
-	.restart	= omap44xx_restart,
-MACHINE_END
-
-MACHINE_START(TI8148EVM, "ti8148evm")
-	/* Maintainer: Texas Instruments */
-	.atag_offset	= 0x100,
-	.map_io		= ti81xx_map_io,
-	.init_early	= ti81xx_init_early,
-	.init_irq	= ti81xx_init_irq,
-	.init_time	= omap3_sync32k_timer_init,
-	.init_machine	= ti81xx_evm_init,
-	.init_late	= ti81xx_init_late,
-	.restart	= omap44xx_restart,
-MACHINE_END

arch/arm/mach-omap2/devices.c

@@ -411,3 +411,29 @@ static int __init omap2_init_devices(void)
 	return 0;
 }
 omap_arch_initcall(omap2_init_devices);
+
+static int __init omap_gpmc_init(void)
+{
+	struct omap_hwmod *oh;
+	struct platform_device *pdev;
+	char *oh_name = "gpmc";
+
+	/*
+	 * if the board boots up with a populated DT, do not
+	 * manually add the device from this initcall
+	 */
+	if (of_have_populated_dt())
+		return -ENODEV;
+
+	oh = omap_hwmod_lookup(oh_name);
+	if (!oh) {
+		pr_err("Could not look up %s\n", oh_name);
+		return -ENODEV;
+	}
+
+	pdev = omap_device_build("omap-gpmc", -1, oh, NULL, 0);
+	WARN(IS_ERR(pdev), "could not build omap_device for %s\n", oh_name);
+
+	return PTR_RET(pdev);
+}
+omap_postcore_initcall(omap_gpmc_init);

arch/arm/mach-omap2/gpmc-nand.c

@@ -12,14 +12,13 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/omap-gpmc.h>
 #include <linux/mtd/nand.h>
 #include <linux/platform_data/mtd-nand-omap2.h>
 
 #include <asm/mach/flash.h>
 
-#include "gpmc.h"
 #include "soc.h"
-#include "gpmc-nand.h"
 
 /* minimum size for IO mapping */
 #define	NAND_IO_SIZE	4

arch/arm/mach-omap2/gpmc-nand.h

-/*
- *  arch/arm/mach-omap2/gpmc-nand.h
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- */
-
-#ifndef	__OMAP2_GPMC_NAND_H
-#define	__OMAP2_GPMC_NAND_H
-
-#include "gpmc.h"
-#include <linux/platform_data/mtd-nand-omap2.h>
-
-#if IS_ENABLED(CONFIG_MTD_NAND_OMAP2)
-extern int gpmc_nand_init(struct omap_nand_platform_data *d,
-			  struct gpmc_timings *gpmc_t);
-#else
-static inline int gpmc_nand_init(struct omap_nand_platform_data *d,
-				 struct gpmc_timings *gpmc_t)
-{
-	return 0;
-}
-#endif
-
-#endif

arch/arm/mach-omap2/gpmc-onenand.c

@@ -15,14 +15,13 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/onenand_regs.h>
 #include <linux/io.h>
+#include <linux/omap-gpmc.h>
 #include <linux/platform_data/mtd-onenand-omap2.h>
 #include <linux/err.h>
 
 #include <asm/mach/flash.h>
 
-#include "gpmc.h"
 #include "soc.h"
-#include "gpmc-onenand.h"
 
 #define	ONENAND_IO_SIZE	SZ_128K
 

arch/arm/mach-omap2/gpmc-onenand.h

-/*
- *  arch/arm/mach-omap2/gpmc-onenand.h
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- */
-
-#ifndef	__OMAP2_GPMC_ONENAND_H
-#define	__OMAP2_GPMC_ONENAND_H
-
-#include <linux/platform_data/mtd-onenand-omap2.h>
-
-#if IS_ENABLED(CONFIG_MTD_ONENAND_OMAP2)
-extern void gpmc_onenand_init(struct omap_onenand_platform_data *d);
-#else
-#define board_onenand_data	NULL
-static inline void gpmc_onenand_init(struct omap_onenand_platform_data *d)
-{
-}
-#endif
-
-#endif

arch/arm/mach-omap2/gpmc-smc91x.c

-/*
- * linux/arch/arm/mach-omap2/gpmc-smc91x.c
- *
- * Copyright (C) 2009 Nokia Corporation
- * Contact:	Tony Lindgren
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/smc91x.h>
-
-#include "gpmc.h"
-#include "gpmc-smc91x.h"
-
-#include "soc.h"
-
-static struct omap_smc91x_platform_data *gpmc_cfg;
-
-static struct resource gpmc_smc91x_resources[] = {
-	[0] = {
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct smc91x_platdata gpmc_smc91x_info = {
-	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_IO_SHIFT_0,
-	.leda	= RPC_LED_100_10,
-	.ledb	= RPC_LED_TX_RX,
-};
-
-static struct platform_device gpmc_smc91x_device = {
-	.name		= "smc91x",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &gpmc_smc91x_info,
-	},
-	.num_resources	= ARRAY_SIZE(gpmc_smc91x_resources),
-	.resource	= gpmc_smc91x_resources,
-};
-
-static struct gpmc_settings smc91x_settings = {
-	.device_width = GPMC_DEVWIDTH_16BIT,
-};
-
-/*
- * Set the gpmc timings for smc91c96. The timings are taken
- * from the data sheet available at:
- * http://www.smsc.com/main/catalog/lan91c96.html
- * REVISIT: Level shifters can add at least to the access latency.
- */
-static int smc91c96_gpmc_retime(void)
-{
-	struct gpmc_timings t;
-	struct gpmc_device_timings dev_t;
-	const int t3 = 10;	/* Figure 12.2 read and 12.4 write */
-	const int t4_r = 20;	/* Figure 12.2 read */
-	const int t4_w = 5;	/* Figure 12.4 write */
-	const int t5 = 25;	/* Figure 12.2 read */
-	const int t6 = 15;	/* Figure 12.2 read */
-	const int t7 = 5;	/* Figure 12.4 write */
-	const int t8 = 5;	/* Figure 12.4 write */
-	const int t20 = 185;	/* Figure 12.2 read and 12.4 write */
-
-	/*
-	 * FIXME: Calculate the address and data bus muxed timings.
-	 * Note that at least adv_rd_off needs to be changed according
-	 * to omap3430 TRM Figure 11-11. Are the sdp boards using the
-	 * FPGA in between smc91x and omap as the timings are different
-	 * from above?
-	 */
-	if (gpmc_cfg->flags & GPMC_MUX_ADD_DATA)
-		return 0;
-
-	memset(&dev_t, 0, sizeof(dev_t));
-
-	dev_t.t_oeasu = t3 * 1000;
-	dev_t.t_oe = t5 * 1000;
-	dev_t.t_cez_r = t4_r * 1000;
-	dev_t.t_oez = t6 * 1000;
-	dev_t.t_rd_cycle = (t20 - t3) * 1000;
-
-	dev_t.t_weasu = t3 * 1000;
-	dev_t.t_wpl = t7 * 1000;
-	dev_t.t_wph = t8 * 1000;
-	dev_t.t_cez_w = t4_w * 1000;
-	dev_t.t_wr_cycle = (t20 - t3) * 1000;
-
-	gpmc_calc_timings(&t, &smc91x_settings, &dev_t);
-
-	return gpmc_cs_set_timings(gpmc_cfg->cs, &t);
-}
-
-/*
- * Initialize smc91x device connected to the GPMC. Note that we
- * assume that pin multiplexing is done in the board-*.c file,
- * or in the bootloader.
- */
-void __init gpmc_smc91x_init(struct omap_smc91x_platform_data *board_data)
-{
-	unsigned long cs_mem_base;
-	int ret;
-
-	gpmc_cfg = board_data;
-
-	if (gpmc_cfg->flags & GPMC_TIMINGS_SMC91C96)
-		gpmc_cfg->retime = smc91c96_gpmc_retime;
-
-	if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) {
-		printk(KERN_ERR "Failed to request GPMC mem for smc91x\n");
-		return;
-	}
-
-	gpmc_smc91x_resources[0].start = cs_mem_base + 0x300;
-	gpmc_smc91x_resources[0].end = cs_mem_base + 0x30f;
-	gpmc_smc91x_resources[1].flags |= (gpmc_cfg->flags & IRQF_TRIGGER_MASK);
-
-	if (gpmc_cfg->flags & GPMC_MUX_ADD_DATA)
-		smc91x_settings.mux_add_data = GPMC_MUX_AD;
-	if (gpmc_cfg->flags & GPMC_READ_MON)
-		smc91x_settings.wait_on_read = true;
-	if (gpmc_cfg->flags & GPMC_WRITE_MON)
-		smc91x_settings.wait_on_write = true;
-	if (gpmc_cfg->wait_pin)
-		smc91x_settings.wait_pin = gpmc_cfg->wait_pin;
-	ret = gpmc_cs_program_settings(gpmc_cfg->cs, &smc91x_settings);
-	if (ret < 0)
-		goto free1;
-
-	if (gpmc_cfg->retime) {
-		ret = gpmc_cfg->retime();
-		if (ret != 0)
-			goto free1;
-	}
-
-	if (gpio_request_one(gpmc_cfg->gpio_irq, GPIOF_IN, "SMC91X irq") < 0)
-		goto free1;
-
-	gpmc_smc91x_resources[1].start = gpio_to_irq(gpmc_cfg->gpio_irq);
-
-	if (gpmc_cfg->gpio_pwrdwn) {
-		ret = gpio_request_one(gpmc_cfg->gpio_pwrdwn,
-				       GPIOF_OUT_INIT_LOW, "SMC91X powerdown");
-		if (ret)
-			goto free2;
-	}
-
-	if (gpmc_cfg->gpio_reset) {
-		ret = gpio_request_one(gpmc_cfg->gpio_reset,
-				       GPIOF_OUT_INIT_LOW, "SMC91X reset");
-		if (ret)
-			goto free3;
-
-		gpio_set_value(gpmc_cfg->gpio_reset, 1);
-		msleep(100);
-		gpio_set_value(gpmc_cfg->gpio_reset, 0);
-	}
-
-	if (platform_device_register(&gpmc_smc91x_device) < 0) {
-		printk(KERN_ERR "Unable to register smc91x device\n");
-		gpio_free(gpmc_cfg->gpio_reset);
-		goto free3;
-	}
-
-	return;
-
-free3:
-	if (gpmc_cfg->gpio_pwrdwn)
-		gpio_free(gpmc_cfg->gpio_pwrdwn);
-free2:
-	gpio_free(gpmc_cfg->gpio_irq);
-free1:
-	gpmc_cs_free(gpmc_cfg->cs);
-
-	printk(KERN_ERR "Could not initialize smc91x\n");
-}

arch/arm/mach-omap2/gpmc-smc91x.h

-/*
- * arch/arm/plat-omap/include/mach/gpmc-smc91x.h
- *
- * Copyright (C) 2009 Nokia Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_OMAP_GPMC_SMC91X_H__
-
-#define GPMC_TIMINGS_SMC91C96	(1 << 4)
-#define GPMC_MUX_ADD_DATA	(1 << 5) /* GPMC_CONFIG1_MUXADDDATA */
-#define GPMC_READ_MON		(1 << 6) /* GPMC_CONFIG1_WAIT_READ_MON */
-#define GPMC_WRITE_MON		(1 << 7) /* GPMC_CONFIG1_WAIT_WRITE_MON */
-
-struct omap_smc91x_platform_data {
-	int	cs;
-	int	gpio_irq;
-	int	gpio_pwrdwn;
-	int	gpio_reset;
-	int	wait_pin;	/* Optional GPMC_CONFIG1_WAITPINSELECT */
-	u32	flags;
-	int	(*retime)(void);
-};
-
-#if defined(CONFIG_SMC91X) || \
-	defined(CONFIG_SMC91X_MODULE)
-
-extern void gpmc_smc91x_init(struct omap_smc91x_platform_data *d);
-
-#else
-
-#define board_smc91x_data	NULL
-
-static inline void gpmc_smc91x_init(struct omap_smc91x_platform_data *d)
-{
-}
-
-#endif
-#endif

arch/arm/mach-omap2/gpmc.h

@@ -6,226 +6,9 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
+ *
+ * Do not include this file in any new code, this will get removed
+ * once omap3 boots in device tree only mode.
+ *
  */
-
-#ifndef __OMAP2_GPMC_H
-#define __OMAP2_GPMC_H
-
-#include <linux/platform_data/mtd-nand-omap2.h>
-
-/* Maximum Number of Chip Selects */
-#define GPMC_CS_NUM		8
-
-#define GPMC_CS_CONFIG1		0x00
-#define GPMC_CS_CONFIG2		0x04
-#define GPMC_CS_CONFIG3		0x08
-#define GPMC_CS_CONFIG4		0x0c
-#define GPMC_CS_CONFIG5		0x10
-#define GPMC_CS_CONFIG6		0x14
-#define GPMC_CS_CONFIG7		0x18
-#define GPMC_CS_NAND_COMMAND	0x1c
-#define GPMC_CS_NAND_ADDRESS	0x20
-#define GPMC_CS_NAND_DATA	0x24
-
-/* Control Commands */
-#define GPMC_CONFIG_RDY_BSY	0x00000001
-#define GPMC_CONFIG_DEV_SIZE	0x00000002
-#define GPMC_CONFIG_DEV_TYPE	0x00000003
-#define GPMC_SET_IRQ_STATUS	0x00000004
-#define GPMC_CONFIG_WP		0x00000005
-
-#define GPMC_ENABLE_IRQ		0x0000000d
-
-/* ECC commands */
-#define GPMC_ECC_READ		0 /* Reset Hardware ECC for read */
-#define GPMC_ECC_WRITE		1 /* Reset Hardware ECC for write */
-#define GPMC_ECC_READSYN	2 /* Reset before syndrom is read back */
-
-#define GPMC_CONFIG1_WRAPBURST_SUPP     (1 << 31)
-#define GPMC_CONFIG1_READMULTIPLE_SUPP  (1 << 30)
-#define GPMC_CONFIG1_READTYPE_ASYNC     (0 << 29)
-#define GPMC_CONFIG1_READTYPE_SYNC      (1 << 29)
-#define GPMC_CONFIG1_WRITEMULTIPLE_SUPP (1 << 28)
-#define GPMC_CONFIG1_WRITETYPE_ASYNC    (0 << 27)
-#define GPMC_CONFIG1_WRITETYPE_SYNC     (1 << 27)
-#define GPMC_CONFIG1_CLKACTIVATIONTIME(val) ((val & 3) << 25)
-#define GPMC_CONFIG1_PAGE_LEN(val)      ((val & 3) << 23)
-#define GPMC_CONFIG1_WAIT_READ_MON      (1 << 22)
-#define GPMC_CONFIG1_WAIT_WRITE_MON     (1 << 21)
-#define GPMC_CONFIG1_WAIT_MON_IIME(val) ((val & 3) << 18)
-#define GPMC_CONFIG1_WAIT_PIN_SEL(val)  ((val & 3) << 16)
-#define GPMC_CONFIG1_DEVICESIZE(val)    ((val & 3) << 12)
-#define GPMC_CONFIG1_DEVICESIZE_16      GPMC_CONFIG1_DEVICESIZE(1)
-#define GPMC_CONFIG1_DEVICETYPE(val)    ((val & 3) << 10)
-#define GPMC_CONFIG1_DEVICETYPE_NOR     GPMC_CONFIG1_DEVICETYPE(0)
-#define GPMC_CONFIG1_MUXTYPE(val)       ((val & 3) << 8)
-#define GPMC_CONFIG1_TIME_PARA_GRAN     (1 << 4)
-#define GPMC_CONFIG1_FCLK_DIV(val)      (val & 3)
-#define GPMC_CONFIG1_FCLK_DIV2          (GPMC_CONFIG1_FCLK_DIV(1))
-#define GPMC_CONFIG1_FCLK_DIV3          (GPMC_CONFIG1_FCLK_DIV(2))
-#define GPMC_CONFIG1_FCLK_DIV4          (GPMC_CONFIG1_FCLK_DIV(3))
-#define GPMC_CONFIG7_CSVALID		(1 << 6)
-
-#define GPMC_DEVICETYPE_NOR		0
-#define GPMC_DEVICETYPE_NAND		2
-#define GPMC_CONFIG_WRITEPROTECT	0x00000010
-#define WR_RD_PIN_MONITORING		0x00600000
-#define GPMC_IRQ_FIFOEVENTENABLE	0x01
-#define GPMC_IRQ_COUNT_EVENT		0x02
-
-#define GPMC_BURST_4			4	/* 4 word burst */
-#define GPMC_BURST_8			8	/* 8 word burst */
-#define GPMC_BURST_16			16	/* 16 word burst */
-#define GPMC_DEVWIDTH_8BIT		1	/* 8-bit device width */
-#define GPMC_DEVWIDTH_16BIT		2	/* 16-bit device width */
-#define GPMC_MUX_AAD			1	/* Addr-Addr-Data multiplex */
-#define GPMC_MUX_AD			2	/* Addr-Data multiplex */
-
-/* bool type time settings */
-struct gpmc_bool_timings {
-	bool cycle2cyclediffcsen;
-	bool cycle2cyclesamecsen;
-	bool we_extra_delay;
-	bool oe_extra_delay;
-	bool adv_extra_delay;
-	bool cs_extra_delay;
-	bool time_para_granularity;
-};
-
-/*
- * Note that all values in this struct are in nanoseconds except sync_clk
- * (which is in picoseconds), while the register values are in gpmc_fck cycles.
- */
-struct gpmc_timings {
-	/* Minimum clock period for synchronous mode (in picoseconds) */
-	u32 sync_clk;
-
-	/* Chip-select signal timings corresponding to GPMC_CS_CONFIG2 */
-	u32 cs_on;		/* Assertion time */
-	u32 cs_rd_off;		/* Read deassertion time */
-	u32 cs_wr_off;		/* Write deassertion time */
-
-	/* ADV signal timings corresponding to GPMC_CONFIG3 */
-	u32 adv_on;		/* Assertion time */
-	u32 adv_rd_off;		/* Read deassertion time */
-	u32 adv_wr_off;		/* Write deassertion time */
-
-	/* WE signals timings corresponding to GPMC_CONFIG4 */
-	u32 we_on;		/* WE assertion time */
-	u32 we_off;		/* WE deassertion time */
-
-	/* OE signals timings corresponding to GPMC_CONFIG4 */
-	u32 oe_on;		/* OE assertion time */
-	u32 oe_off;		/* OE deassertion time */
-
-	/* Access time and cycle time timings corresponding to GPMC_CONFIG5 */
-	u32 page_burst_access;	/* Multiple access word delay */
-	u32 access;		/* Start-cycle to first data valid delay */
-	u32 rd_cycle;		/* Total read cycle time */
-	u32 wr_cycle;		/* Total write cycle time */
-
-	u32 bus_turnaround;
-	u32 cycle2cycle_delay;
-
-	u32 wait_monitoring;
-	u32 clk_activation;
-
-	/* The following are only on OMAP3430 */
-	u32 wr_access;		/* WRACCESSTIME */
-	u32 wr_data_mux_bus;	/* WRDATAONADMUXBUS */
-
-	struct gpmc_bool_timings bool_timings;
-};
-
-/* Device timings in picoseconds */
-struct gpmc_device_timings {
-	u32 t_ceasu;	/* address setup to CS valid */
-	u32 t_avdasu;	/* address setup to ADV valid */
-	/* XXX: try to combine t_avdp_r & t_avdp_w. Issue is
-	 * of tusb using these timings even for sync whilst
-	 * ideally for adv_rd/(wr)_off it should have considered
-	 * t_avdh instead. This indirectly necessitates r/w
-	 * variations of t_avdp as it is possible to have one
-	 * sync & other async
-	 */
-	u32 t_avdp_r;	/* ADV low time (what about t_cer ?) */
-	u32 t_avdp_w;
-	u32 t_aavdh;	/* address hold time */
-	u32 t_oeasu;	/* address setup to OE valid */
-	u32 t_aa;	/* access time from ADV assertion */
-	u32 t_iaa;	/* initial access time */
-	u32 t_oe;	/* access time from OE assertion */
-	u32 t_ce;	/* access time from CS asertion */
-	u32 t_rd_cycle;	/* read cycle time */
-	u32 t_cez_r;	/* read CS deassertion to high Z */
-	u32 t_cez_w;	/* write CS deassertion to high Z */
-	u32 t_oez;	/* OE deassertion to high Z */
-	u32 t_weasu;	/* address setup to WE valid */
-	u32 t_wpl;	/* write assertion time */
-	u32 t_wph;	/* write deassertion time */
-	u32 t_wr_cycle;	/* write cycle time */
-
-	u32 clk;
-	u32 t_bacc;	/* burst access valid clock to output delay */
-	u32 t_ces;	/* CS setup time to clk */
-	u32 t_avds;	/* ADV setup time to clk */
-	u32 t_avdh;	/* ADV hold time from clk */
-	u32 t_ach;	/* address hold time from clk */
-	u32 t_rdyo;	/* clk to ready valid */
-
-	u32 t_ce_rdyz;	/* XXX: description ?, or use t_cez instead */
-	u32 t_ce_avd;	/* CS on to ADV on delay */
-
-	/* XXX: check the possibility of combining
-	 * cyc_aavhd_oe & cyc_aavdh_we
-	 */
-	u8 cyc_aavdh_oe;/* read address hold time in cycles */
-	u8 cyc_aavdh_we;/* write address hold time in cycles */
-	u8 cyc_oe;	/* access time from OE assertion in cycles */
-	u8 cyc_wpl;	/* write deassertion time in cycles */
-	u32 cyc_iaa;	/* initial access time in cycles */
-
-	/* extra delays */
-	bool ce_xdelay;
-	bool avd_xdelay;
-	bool oe_xdelay;
-	bool we_xdelay;
-};
-
-struct gpmc_settings {
-	bool burst_wrap;	/* enables wrap bursting */
-	bool burst_read;	/* enables read page/burst mode */
-	bool burst_write;	/* enables write page/burst mode */
-	bool device_nand;	/* device is NAND */
-	bool sync_read;		/* enables synchronous reads */
-	bool sync_write;	/* enables synchronous writes */
-	bool wait_on_read;	/* monitor wait on reads */
-	bool wait_on_write;	/* monitor wait on writes */
-	u32 burst_len;		/* page/burst length */
-	u32 device_width;	/* device bus width (8 or 16 bit) */
-	u32 mux_add_data;	/* multiplex address & data */
-	u32 wait_pin;		/* wait-pin to be used */
-};
-
-extern int gpmc_calc_timings(struct gpmc_timings *gpmc_t,
-			     struct gpmc_settings *gpmc_s,
-			     struct gpmc_device_timings *dev_t);
-
-extern void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs);
-extern int gpmc_get_client_irq(unsigned irq_config);
-
-extern unsigned int gpmc_ticks_to_ns(unsigned int ticks);
-
-extern void gpmc_cs_write_reg(int cs, int idx, u32 val);
-extern int gpmc_calc_divider(unsigned int sync_clk);
-extern int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t);
-extern int gpmc_cs_program_settings(int cs, struct gpmc_settings *p);
-extern int gpmc_cs_request(int cs, unsigned long size, unsigned long *base);
-extern void gpmc_cs_free(int cs);
-extern void omap3_gpmc_save_context(void);
-extern void omap3_gpmc_restore_context(void);
-extern int gpmc_configure(int cmd, int wval);
-extern void gpmc_read_settings_dt(struct device_node *np,
-				  struct gpmc_settings *p);
-
-#endif
+#include <linux/omap-gpmc.h>

arch/arm/mach-omap2/pm34xx.c

@@ -29,6 +29,7 @@
 #include <linux/delay.h>
 #include <linux/slab.h>
 #include <linux/omap-dma.h>
+#include <linux/omap-gpmc.h>
 #include <linux/platform_data/gpio-omap.h>
 
 #include <trace/events/power.h>
@@ -43,7 +44,6 @@
 #include "common.h"
 #include "cm3xxx.h"
 #include "cm-regbits-34xx.h"
-#include "gpmc.h"
 #include "prm-regbits-34xx.h"
 #include "prm3xxx.h"
 #include "pm.h"

drivers/memory/Kconfig

@@ -41,6 +41,14 @@ config TI_EMIF
 	  parameters and other settings during frequency, voltage and
 	  temperature changes
 
+config OMAP_GPMC
+	bool
+	help
+	  This driver is for the General Purpose Memory Controller (GPMC)
+	  present on Texas Instruments SoCs (e.g. OMAP2+). GPMC allows
+	  interfacing to a variety of asynchronous as well as synchronous
+	  memory drives like NOR, NAND, OneNAND, SRAM.
+
 config MVEBU_DEVBUS
 	bool "Marvell EBU Device Bus Controller"
 	default y

drivers/memory/Makefile

@@ -8,6 +8,7 @@ endif
 obj-$(CONFIG_ATMEL_SDRAMC)	+= atmel-sdramc.o
 obj-$(CONFIG_TI_AEMIF)		+= ti-aemif.o
 obj-$(CONFIG_TI_EMIF)		+= emif.o
+obj-$(CONFIG_OMAP_GPMC)		+= omap-gpmc.o
 obj-$(CONFIG_FSL_CORENET_CF)	+= fsl-corenet-cf.o
 obj-$(CONFIG_FSL_IFC)		+= fsl_ifc.o
 obj-$(CONFIG_MVEBU_DEVBUS)	+= mvebu-devbus.o

include/linux/omap-gpmc.h

+/*
+ *  OMAP GPMC (General Purpose Memory Controller) defines
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+/* Maximum Number of Chip Selects */
+#define GPMC_CS_NUM		8
+
+#define GPMC_CONFIG_WP		0x00000005
+
+#define GPMC_IRQ_FIFOEVENTENABLE	0x01
+#define GPMC_IRQ_COUNT_EVENT		0x02
+
+#define GPMC_BURST_4			4	/* 4 word burst */
+#define GPMC_BURST_8			8	/* 8 word burst */
+#define GPMC_BURST_16			16	/* 16 word burst */
+#define GPMC_DEVWIDTH_8BIT		1	/* 8-bit device width */
+#define GPMC_DEVWIDTH_16BIT		2	/* 16-bit device width */
+#define GPMC_MUX_AAD			1	/* Addr-Addr-Data multiplex */
+#define GPMC_MUX_AD			2	/* Addr-Data multiplex */
+
+/* bool type time settings */
+struct gpmc_bool_timings {
+	bool cycle2cyclediffcsen;
+	bool cycle2cyclesamecsen;
+	bool we_extra_delay;
+	bool oe_extra_delay;
+	bool adv_extra_delay;
+	bool cs_extra_delay;
+	bool time_para_granularity;
+};
+
+/*
+ * Note that all values in this struct are in nanoseconds except sync_clk
+ * (which is in picoseconds), while the register values are in gpmc_fck cycles.
+ */
+struct gpmc_timings {
+	/* Minimum clock period for synchronous mode (in picoseconds) */
+	u32 sync_clk;
+
+	/* Chip-select signal timings corresponding to GPMC_CS_CONFIG2 */
+	u32 cs_on;		/* Assertion time */
+	u32 cs_rd_off;		/* Read deassertion time */
+	u32 cs_wr_off;		/* Write deassertion time */
+
+	/* ADV signal timings corresponding to GPMC_CONFIG3 */
+	u32 adv_on;		/* Assertion time */
+	u32 adv_rd_off;		/* Read deassertion time */
+	u32 adv_wr_off;		/* Write deassertion time */
+
+	/* WE signals timings corresponding to GPMC_CONFIG4 */
+	u32 we_on;		/* WE assertion time */
+	u32 we_off;		/* WE deassertion time */
+
+	/* OE signals timings corresponding to GPMC_CONFIG4 */
+	u32 oe_on;		/* OE assertion time */
+	u32 oe_off;		/* OE deassertion time */
+
+	/* Access time and cycle time timings corresponding to GPMC_CONFIG5 */
+	u32 page_burst_access;	/* Multiple access word delay */
+	u32 access;		/* Start-cycle to first data valid delay */
+	u32 rd_cycle;		/* Total read cycle time */
+	u32 wr_cycle;		/* Total write cycle time */
+
+	u32 bus_turnaround;
+	u32 cycle2cycle_delay;
+
+	u32 wait_monitoring;
+	u32 clk_activation;
+
+	/* The following are only on OMAP3430 */
+	u32 wr_access;		/* WRACCESSTIME */
+	u32 wr_data_mux_bus;	/* WRDATAONADMUXBUS */
+
+	struct gpmc_bool_timings bool_timings;
+};
+
+/* Device timings in picoseconds */
+struct gpmc_device_timings {
+	u32 t_ceasu;	/* address setup to CS valid */
+	u32 t_avdasu;	/* address setup to ADV valid */
+	/* XXX: try to combine t_avdp_r & t_avdp_w. Issue is
+	 * of tusb using these timings even for sync whilst
+	 * ideally for adv_rd/(wr)_off it should have considered
+	 * t_avdh instead. This indirectly necessitates r/w
+	 * variations of t_avdp as it is possible to have one
+	 * sync & other async
+	 */
+	u32 t_avdp_r;	/* ADV low time (what about t_cer ?) */
+	u32 t_avdp_w;
+	u32 t_aavdh;	/* address hold time */
+	u32 t_oeasu;	/* address setup to OE valid */
+	u32 t_aa;	/* access time from ADV assertion */
+	u32 t_iaa;	/* initial access time */
+	u32 t_oe;	/* access time from OE assertion */
+	u32 t_ce;	/* access time from CS asertion */
+	u32 t_rd_cycle;	/* read cycle time */
+	u32 t_cez_r;	/* read CS deassertion to high Z */
+	u32 t_cez_w;	/* write CS deassertion to high Z */
+	u32 t_oez;	/* OE deassertion to high Z */
+	u32 t_weasu;	/* address setup to WE valid */
+	u32 t_wpl;	/* write assertion time */
+	u32 t_wph;	/* write deassertion time */
+	u32 t_wr_cycle;	/* write cycle time */
+
+	u32 clk;
+	u32 t_bacc;	/* burst access valid clock to output delay */
+	u32 t_ces;	/* CS setup time to clk */
+	u32 t_avds;	/* ADV setup time to clk */
+	u32 t_avdh;	/* ADV hold time from clk */
+	u32 t_ach;	/* address hold time from clk */
+	u32 t_rdyo;	/* clk to ready valid */
+
+	u32 t_ce_rdyz;	/* XXX: description ?, or use t_cez instead */
+	u32 t_ce_avd;	/* CS on to ADV on delay */
+
+	/* XXX: check the possibility of combining
+	 * cyc_aavhd_oe & cyc_aavdh_we
+	 */
+	u8 cyc_aavdh_oe;/* read address hold time in cycles */
+	u8 cyc_aavdh_we;/* write address hold time in cycles */
+	u8 cyc_oe;	/* access time from OE assertion in cycles */
+	u8 cyc_wpl;	/* write deassertion time in cycles */
+	u32 cyc_iaa;	/* initial access time in cycles */
+
+	/* extra delays */
+	bool ce_xdelay;
+	bool avd_xdelay;
+	bool oe_xdelay;
+	bool we_xdelay;
+};
+
+struct gpmc_settings {
+	bool burst_wrap;	/* enables wrap bursting */
+	bool burst_read;	/* enables read page/burst mode */
+	bool burst_write;	/* enables write page/burst mode */
+	bool device_nand;	/* device is NAND */
+	bool sync_read;		/* enables synchronous reads */
+	bool sync_write;	/* enables synchronous writes */
+	bool wait_on_read;	/* monitor wait on reads */
+	bool wait_on_write;	/* monitor wait on writes */
+	u32 burst_len;		/* page/burst length */
+	u32 device_width;	/* device bus width (8 or 16 bit) */
+	u32 mux_add_data;	/* multiplex address & data */
+	u32 wait_pin;		/* wait-pin to be used */
+};
+
+extern int gpmc_calc_timings(struct gpmc_timings *gpmc_t,
+			     struct gpmc_settings *gpmc_s,
+			     struct gpmc_device_timings *dev_t);
+
+struct gpmc_nand_regs;
+struct device_node;
+
+extern void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs);
+extern int gpmc_get_client_irq(unsigned irq_config);
+
+extern unsigned int gpmc_ticks_to_ns(unsigned int ticks);
+
+extern void gpmc_cs_write_reg(int cs, int idx, u32 val);
+extern int gpmc_calc_divider(unsigned int sync_clk);
+extern int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t);
+extern int gpmc_cs_program_settings(int cs, struct gpmc_settings *p);
+extern int gpmc_cs_request(int cs, unsigned long size, unsigned long *base);
+extern void gpmc_cs_free(int cs);
+extern int gpmc_configure(int cmd, int wval);
+extern void gpmc_read_settings_dt(struct device_node *np,
+				  struct gpmc_settings *p);
+
+extern void omap3_gpmc_save_context(void);
+extern void omap3_gpmc_restore_context(void);
+
+struct gpmc_timings;
+struct omap_nand_platform_data;
+struct omap_onenand_platform_data;
+
+#if IS_ENABLED(CONFIG_MTD_NAND_OMAP2)
+extern int gpmc_nand_init(struct omap_nand_platform_data *d,
+			  struct gpmc_timings *gpmc_t);
+#else
+static inline int gpmc_nand_init(struct omap_nand_platform_data *d,
+				 struct gpmc_timings *gpmc_t)
+{
+	return 0;
+}
+#endif
+
+#if IS_ENABLED(CONFIG_MTD_ONENAND_OMAP2)
+extern void gpmc_onenand_init(struct omap_onenand_platform_data *d);
+#else
+#define board_onenand_data	NULL
+static inline void gpmc_onenand_init(struct omap_onenand_platform_data *d)
+{
+}
+#endif