dt-bindings: soundwire: Convert text bindings to DT Schema

Convert soundwire text bindings to DT Schema format. Update interrupt property items as per device tree, as it is not appropriately described in text file. Update some of the properties description with minimum and maximum range. Update secondary node info which is used to describe slave devices. Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com> Co-developed-by: Ratna Deepthi Kudaravalli <quic_rkudarav@quicinc.com> Signed-off-by: Ratna Deepthi Kudaravalli <quic_rkudarav@quicinc.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/1667918763-32445-5-git-send-email-quic_srivasam@quicinc.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

dt-bindings: soundwire: Convert text bindings to DT Schema
Convert soundwire text bindings to DT Schema format. Update interrupt property items as per device tree, as it is not appropriately described in text file. Update some of the properties description with minimum and maximum range. Update secondary node info which is used to describe slave devices. Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com> Co-developed-by: Ratna Deepthi Kudaravalli <quic_rkudarav@quicinc.com> Signed-off-by: Ratna Deepthi Kudaravalli <quic_rkudarav@quicinc.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/1667918763-32445-5-git-send-email-quic_srivasam@quicinc.comSigned-off-by: Vinod Koul <vkoul@kernel.org>
febc50b8 · Srinivasa Rao Mandadapu · Vinod Koul · 7dddead7 · 7dddead7 · febc50b8
Commit febc50b8 authored Nov 08, 2022 by Srinivasa Rao Mandadapu Committed by Vinod Koul Nov 09, 2022
2 changed files
--- a/Documentation/devicetree/bindings/soundwire/qcom,sdw.txt
+++ b/Documentation/devicetree/bindings/soundwire/qcom,sdw.txt
-Qualcomm SoundWire Controller Bindings
-This binding describes the Qualcomm SoundWire Controller along with its
-board specific bus parameters.
- compatible:
-	Usage: required
-	Value type: <stringlist>
-	Definition: must be "qcom,soundwire-v<MAJOR>.<MINOR>.<STEP>",
-		    Example:
-			"qcom,soundwire-v1.3.0"
-			"qcom,soundwire-v1.5.0"
-			"qcom,soundwire-v1.5.1"
-			"qcom,soundwire-v1.6.0"
-			"qcom,soundwire-v1.7.0"
- reg:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: the base address and size of SoundWire controller
-		    address space.
- interrupts:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: should specify the SoundWire Controller core and optional
-		    wake IRQ
- interrupt-names:
-	Usage: Optional
-	Value type: boolean
-	Value type: <stringlist>
-	Definition: should be "core" for core and "wakeup" for wake interrupt.
- wakeup-source:
-	Usage: Optional
-	Value type: boolean
-	Definition: should specify if SoundWire Controller is wake up capable.
- clock-names:
-	Usage: required
-	Value type: <stringlist>
-	Definition: should be "iface" for SoundWire Controller interface clock
- clocks:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: should specify the SoundWire Controller interface clock
- #sound-dai-cells:
-	Usage: required
-	Value type: <u32>
-	Definition: must be 1 for digital audio interfaces on the controller.
- qcom,dout-ports:
-	Usage: required
-	Value type: <u32>
-	Definition: must be count of data out ports
- qcom,din-ports:
-	Usage: required
-	Value type: <u32>
-	Definition: must be count of data in ports
- qcom,ports-offset1:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: should specify payload transport window offset1 of each
-		    data port. Out ports followed by In ports.
-		    Value of 0xFF indicates that this option is not implemented
-		    or applicable for the respective data port.
-		    More info in MIPI Alliance SoundWire 1.0 Specifications.
- qcom,ports-offset2:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: should specify payload transport window offset2 of each
-		    data port. Out ports followed by In ports.
-		    Value of 0xFF indicates that this option is not implemented
-		    or applicable for the respective data port.
-		    More info in MIPI Alliance SoundWire 1.0 Specifications.
- qcom,ports-sinterval-low:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: should be sample interval low of each data port.
-		    Out ports followed by In ports. Used for Sample Interval
-		    calculation.
-		    Value of 0xFF indicates that this option is not implemented
-		    or applicable for the respective data port.
-		    More info in MIPI Alliance SoundWire 1.0 Specifications.
- qcom,ports-word-length:
-	Usage: optional
-	Value type: <prop-encoded-array>
-	Definition: should be size of payload channel sample.
-		    Value of 0xFF indicates that this option is not implemented
-		    or applicable for the respective data port.
-		    More info in MIPI Alliance SoundWire 1.0 Specifications.
- qcom,ports-block-pack-mode:
-	Usage: optional
-	Value type: <prop-encoded-array>
-	Definition: should be 0 or 1 to indicate the block packing mode.
-		    0 to indicate Blocks are per Channel
-		    1 to indicate Blocks are per Port.
-		    Out ports followed by In ports.
-		    Value of 0xFF indicates that this option is not implemented
-		    or applicable for the respective data port.
-		    More info in MIPI Alliance SoundWire 1.0 Specifications.
- qcom,ports-block-group-count:
-	Usage: optional
-	Value type: <prop-encoded-array>
-	Definition: should be in range 1 to 4 to indicate how many sample
-		    intervals are combined into a payload.
-		    Out ports followed by In ports.
-		    Value of 0xFF indicates that this option is not implemented
-		    or applicable for the respective data port.
-		    More info in MIPI Alliance SoundWire 1.0 Specifications.
- qcom,ports-lane-control:
-	Usage: optional
-	Value type: <prop-encoded-array>
-	Definition: should be in range 0 to 7 to identify which	data lane
-		    the data port uses.
-		    Out ports followed by In ports.
-		    Value of 0xFF indicates that this option is not implemented
-		    or applicable for the respective data port.
-		    More info in MIPI Alliance SoundWire 1.0 Specifications.
- qcom,ports-hstart:
-	Usage: optional
-	Value type: <prop-encoded-array>
-	Definition: should be number identifying lowerst numbered coloum in
-		    SoundWire Frame, i.e. left edge of the Transport sub-frame
-		    for each port. Values between 0 and 15 are valid.
-		    Out ports followed by In ports.
-		    Value of 0xFF indicates that this option is not implemented
-		    or applicable for the respective data port.
-		    More info in MIPI Alliance SoundWire 1.0 Specifications.
- qcom,ports-hstop:
-	Usage: optional
-	Value type: <prop-encoded-array>
-	Definition: should be number identifying highest numbered coloum in
-		    SoundWire Frame, i.e. the right edge of the Transport
-		    sub-frame for each port. Values between 0 and 15 are valid.
-		    Out ports followed by In ports.
-		    Value of 0xFF indicates that this option is not implemented
-		    or applicable for the respective data port.
-		    More info in MIPI Alliance SoundWire 1.0 Specifications.
- qcom,dports-type:
-	Usage: optional
-	Value type: <prop-encoded-array>
-	Definition: should be one of the following types
-		    0 for reduced port
-		    1 for simple ports
-		    2 for full port
-		    Out ports followed by In ports.
-		    Value of 0xFF indicates that this option is not implemented
-		    or applicable for the respective data port.
-		    More info in MIPI Alliance SoundWire 1.0 Specifications.
- reset:
-	Usage: optional
-	Value type: <prop-encoded-array>
-	Definition: Should specify the SoundWire audio CSR reset controller interface,
-		    which is required for SoundWire version 1.6.0 and above.
- reset-names:
-	Usage: optional
-	Value type: <stringlist>
-	Definition: should be "swr_audio_cgcr" for SoundWire audio CSR reset
-		    controller interface.
-Note:
-	More Information on detail of encoding of these fields can be
-found in MIPI Alliance SoundWire 1.0 Specifications.
-= SoundWire devices
-Each subnode of the bus represents SoundWire device attached to it.
-The properties of these nodes are defined by the individual bindings.
-= EXAMPLE
-The following example represents a SoundWire controller on DB845c board
-which has controller integrated inside WCD934x codec on SDM845 SoC.
-soundwire: soundwire@c85 {
-	compatible = "qcom,soundwire-v1.3.0";
-	reg = <0xc85 0x20>;
-	interrupts = <20 IRQ_TYPE_EDGE_RISING>;
-	clocks = <&wcc>;
-	clock-names = "iface";
-	resets = <&lpass_audiocc LPASS_AUDIO_SWR_TX_CGCR>;
-	reset-names = "swr_audio_cgcr";
-	#sound-dai-cells = <1>;
-	qcom,dports-type = <0>;
-	qcom,dout-ports	= <6>;
-	qcom,din-ports	= <2>;
-	qcom,ports-sinterval-low = /bits/ 8  <0x07 0x1F 0x3F 0x7 0x1F 0x3F 0x0F 0x0F>;
-	qcom,ports-offset1 = /bits/ 8 <0x01 0x02 0x0C 0x6 0x12 0x0D 0x07 0x0A >;
-	qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x1F 0x00 0x00 0x1F 0x00 0x00>;
-	/* Left Speaker */
-	left{
-		....
-	};
-	/* Right Speaker */
-	right{
-		....
-	};
-};
--- a/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml
+++ b/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soundwire/qcom,soundwire.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+title: Qualcomm SoundWire Controller
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+  - Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
+description:
+  The Qualcomm SoundWire controller along with its board specific bus parameters.
+properties:
+  compatible:
+    enum:
+      - qcom,soundwire-v1.3.0
+      - qcom,soundwire-v1.5.0
+      - qcom,soundwire-v1.5.1
+      - qcom,soundwire-v1.6.0
+      - qcom,soundwire-v1.7.0
+  reg:
+    maxItems: 1
+  interrupts:
+    minItems: 1
+    items:
+      - description: specify the SoundWire controller core.
+      - description: specify the Soundwire controller wake IRQ.
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: core
+      - const: wakeup
+  clocks:
+    items:
+      - description: iface clock
+  clock-names:
+    items:
+      - const: iface
+  resets:
+    items:
+      - description: SWR_AUDIO_CGCR RESET
+  reset-names:
+    items:
+      - const: swr_audio_cgcr
+  '#sound-dai-cells':
+    const: 1
+  '#address-cells':
+    const: 2
+  '#size-cells':
+    const: 0
+  wakeup-source: true
+  qcom,din-ports:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: count of data in ports
+  qcom,dout-ports:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: count of data out ports
+  qcom,ports-word-length:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description:
+      Size of payload channel sample.
+      Value of 0xff indicates that this option is not implemented
+      or applicable for the respective data port.
+      More info in MIPI Alliance SoundWire 1.0 Specifications.
+    minItems: 3
+    maxItems: 5
+  qcom,ports-sinterval-low:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description:
+      Sample interval low of each data port.
+      Out ports followed by In ports. Used for Sample Interval calculation.
+      Value of 0xff indicates that this option is not implemented
+      or applicable for the respective data port.
+      More info in MIPI Alliance SoundWire 1.0 Specifications.
+    minItems: 3
+    maxItems: 8
+  qcom,ports-offset1:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description:
+      Payload transport window offset1 of each data port.
+      Out ports followed by In ports.
+      Value of 0xff indicates that this option is not implemented
+      or applicable for the respective data port.
+      More info in MIPI Alliance SoundWire 1.0 Specifications.
+    minItems: 3
+    maxItems: 8
+  qcom,ports-offset2:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description:
+      Payload transport window offset2 of each data port.
+      Out ports followed by In ports.
+      Value of 0xff indicates that this option is not implemented
+      or applicable for the respective data port.
+      More info in MIPI Alliance SoundWire 1.0 Specifications.
+    minItems: 3
+    maxItems: 8
+  qcom,ports-lane-control:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description:
+      Identify which data lane the data port uses.
+      Out ports followed by In ports.
+      Value of 0xff indicates that this option is not implemented
+      or applicable for the respective data port.
+      More info in MIPI Alliance SoundWire 1.0 Specifications.
+    minItems: 3
+    maxItems: 5
+  qcom,ports-block-pack-mode:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description:
+      Indicate the block packing mode.
+      0 to indicate Blocks are per Channel
+      1 to indicate Blocks are per Port.
+      Out ports followed by In ports.
+      Value of 0xff indicates that this option is not implemented
+      or applicable for the respective data port.
+      More info in MIPI Alliance SoundWire 1.0 Specifications.
+    minItems: 3
+    maxItems: 8
+    items:
+      oneOf:
+        - minimum: 0
+          maximum: 1
+        - const: 0xff
+  qcom,ports-hstart:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description:
+      Identifying lowerst numbered coloum in SoundWire Frame,
+      i.e. left edge of the Transport sub-frame for each port.
+      Out ports followed by In ports.
+      Value of 0xff indicates that this option is not implemented
+      or applicable for the respective data port.
+      More info in MIPI Alliance SoundWire 1.0 Specifications.
+    minItems: 3
+    maxItems: 5
+    items:
+      oneOf:
+        - minimum: 0
+          maximum: 15
+        - const: 0xff
+  qcom,ports-hstop:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description:
+      Identifying highest numbered coloum in SoundWire Frame,
+      i.e. the right edge of the Transport
+      sub-frame for each port. Out ports followed by In ports.
+      Value of 0xff indicates that this option is not implemented
+      or applicable for the respective data port.
+      More info in MIPI Alliance SoundWire 1.0 Specifications.
+    minItems: 3
+    maxItems: 5
+    items:
+      oneOf:
+        - minimum: 0
+          maximum: 15
+        - const: 0xff
+  qcom,ports-block-group-count:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description:
+      In range 1 to 4 to indicate how many sample intervals are combined
+      into a payload. Out ports followed by In ports.
+      Value of 0xff indicates that this option is not implemented
+      or applicable for the respective data port.
+      More info in MIPI Alliance SoundWire 1.0 Specifications.
+    minItems: 3
+    maxItems: 5
+    items:
+      oneOf:
+        - minimum: 0
+          maximum: 4
+        - const: 0xff
+  label:
+    maxItems: 1
+patternProperties:
+  "^.*@[0-9a-f],[0-9a-f]$":
+    type: object
+    description:
+      Child nodes for a standalone audio codec or speaker amplifier IC.
+      It has RX and TX Soundwire secondary devices.
+    properties:
+      compatible:
+        pattern: "^sdw[0-9a-f]{1}[0-9a-f]{4}[0-9a-f]{4}[0-9a-f]{2}$"
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - '#sound-dai-cells'
+  - '#address-cells'
+  - '#size-cells'
+  - qcom,dout-ports
+  - qcom,din-ports
+  - qcom,ports-sinterval-low
+  - qcom,ports-offset1
+  - qcom,ports-offset2
+additionalProperties: false
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/qcom,lpassaudiocc-sc7280.h>
+    soundwire@3210000 {
+        compatible = "qcom,soundwire-v1.6.0";
+        reg = <0x03210000 0x2000>;
+        interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+                     <&pdc 130 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "core", "wakeup";
+        clocks = <&lpass_rx_macro>;
+        clock-names = "iface";
+        qcom,din-ports = <0>;
+        qcom,dout-ports = <5>;
+        resets = <&lpass_audiocc LPASS_AUDIO_SWR_RX_CGCR>;
+        reset-names = "swr_audio_cgcr";
+        qcom,ports-word-length =        /bits/ 8 <0x01 0x07 0x04 0xff 0xff>;
+        qcom,ports-sinterval-low =      /bits/ 8 <0x03 0x3f 0x1f 0x03 0x03>;
+        qcom,ports-offset1 =            /bits/ 8 <0x00 0x00 0x0b 0x01 0x01>;
+        qcom,ports-offset2 =            /bits/ 8 <0x00 0x00 0x0b 0x00 0x00>;
+        qcom,ports-lane-control =       /bits/ 8 <0x01 0x00 0x00 0x00 0x00>;
+        qcom,ports-block-pack-mode =    /bits/ 8 <0xff 0x00 0x01 0xff 0xff>;
+        qcom,ports-hstart =             /bits/ 8 <0xff 0x03 0xff 0xff 0xff>;
+        qcom,ports-hstop =              /bits/ 8 <0xff 0x06 0xff 0xff 0xff>;
+        qcom,ports-block-group-count =  /bits/ 8 <0xff 0xff 0xff 0xff 0x00>;
+        #sound-dai-cells = <1>;
+        #address-cells = <2>;
+        #size-cells = <0>;
+        codec@0,4 {
+            compatible = "sdw20217010d00";
+            reg = <0 4>;
+            qcom,rx-port-mapping = <1 2 3 4 5>;
+        };
+    };