Merge tag '4.4-scsi-mkp' into misc

SCSI queue for 4.4.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Documentation/devicetree/bindings/ufs/ufs-qcom.txt

+* Qualcomm Technologies Inc Universal Flash Storage (UFS) PHY
+
+UFSPHY nodes are defined to describe on-chip UFS PHY hardware macro.
+Each UFS PHY node should have its own node.
+
+To bind UFS PHY with UFS host controller, the controller node should
+contain a phandle reference to UFS PHY node.
+
+Required properties:
+- compatible        : compatible list, contains "qcom,ufs-phy-qmp-20nm"
+		      or "qcom,ufs-phy-qmp-14nm" according to the relevant phy in use.
+- reg               : should contain PHY register address space (mandatory),
+- reg-names         : indicates various resources passed to driver (via reg proptery) by name.
+                      Required "reg-names" is "phy_mem".
+- #phy-cells        : This property shall be set to 0
+- vdda-phy-supply   : phandle to main PHY supply for analog domain
+- vdda-pll-supply   : phandle to PHY PLL and Power-Gen block power supply
+- clocks	    : List of phandle and clock specifier pairs
+- clock-names       : List of clock input name strings sorted in the same
+		      order as the clocks property. "ref_clk_src", "ref_clk",
+		      "tx_iface_clk" & "rx_iface_clk" are mandatory but
+		      "ref_clk_parent" is optional
+
+Optional properties:
+- vdda-phy-max-microamp : specifies max. load that can be drawn from phy supply
+- vdda-pll-max-microamp : specifies max. load that can be drawn from pll supply
+- vddp-ref-clk-supply   : phandle to UFS device ref_clk pad power supply
+- vddp-ref-clk-max-microamp : specifies max. load that can be drawn from this supply
+- vddp-ref-clk-always-on : specifies if this supply needs to be kept always on
+
+Example:
+
+	ufsphy1: ufsphy@0xfc597000 {
+		compatible = "qcom,ufs-phy-qmp-20nm";
+		reg = <0xfc597000 0x800>;
+		reg-names = "phy_mem";
+		#phy-cells = <0>;
+		vdda-phy-supply = <&pma8084_l4>;
+		vdda-pll-supply = <&pma8084_l12>;
+		vdda-phy-max-microamp = <50000>;
+		vdda-pll-max-microamp = <1000>;
+		clock-names = "ref_clk_src",
+			"ref_clk_parent",
+			"ref_clk",
+			"tx_iface_clk",
+			"rx_iface_clk";
+		clocks = <&clock_rpm clk_ln_bb_clk>,
+			<&clock_gcc clk_pcie_1_phy_ldo >,
+			<&clock_gcc clk_ufs_phy_ldo>,
+			<&clock_gcc clk_gcc_ufs_tx_cfg_clk>,
+			<&clock_gcc clk_gcc_ufs_rx_cfg_clk>;
+	};
+
+	ufshc@0xfc598000 {
+		...
+		phys = <&ufsphy1>;
+		phy-names = "ufsphy";
+	};

Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt

@@ -4,11 +4,18 @@ UFSHC nodes are defined to describe on-chip UFS host controllers.
 Each UFS controller instance should have its own node.
 
 Required properties:
-- compatible        : compatible list, contains "jedec,ufs-1.1"
+- compatible		: must contain "jedec,ufs-1.1", may also list one or more
+					  of the following:
+					  "qcom,msm8994-ufshc"
+					  "qcom,msm8996-ufshc"
+					  "qcom,ufshc"
 - interrupts        : <interrupt mapping for UFS host controller IRQ>
 - reg               : <registers mapping>
 
 Optional properties:
+- phys                  : phandle to UFS PHY node
+- phy-names             : the string "ufsphy" when is found in a node, along
+                          with "phys" attribute, provides phandle to UFS PHY node
 - vdd-hba-supply        : phandle to UFS host controller supply regulator node
 - vcc-supply            : phandle to VCC supply regulator node
 - vccq-supply           : phandle to VCCQ supply regulator node
@@ -54,4 +61,6 @@ Example:
 		clocks = <&core 0>, <&ref 0>, <&iface 0>;
 		clock-names = "core_clk", "ref_clk", "iface_clk";
 		freq-table-hz = <100000000 200000000>, <0 0>, <0 0>;
+		phys = <&ufsphy1>;
+		phy-names = "ufsphy";
 	};

drivers/message/fusion/mptctl.c

@@ -1038,6 +1038,10 @@ kbuf_alloc_2_sgl(int bytes, u32 sgdir, int sge_offset, int *frags,
 	int		 i, buflist_ent;
 	int		 sg_spill = MAX_FRAGS_SPILL1;
 	int		 dir;
+
+	if (bytes < 0)
+		return NULL;
+
 	/* initialization */
 	*frags = 0;
 	*blp = NULL;

drivers/phy/phy-qcom-ufs.c

@@ -432,6 +432,7 @@ int ufs_qcom_phy_enable_ref_clk(struct phy *generic_phy)
 out:
 	return ret;
 }
+EXPORT_SYMBOL_GPL(ufs_qcom_phy_enable_ref_clk);
 
 static
 int ufs_qcom_phy_disable_vreg(struct phy *phy,
@@ -474,6 +475,7 @@ void ufs_qcom_phy_disable_ref_clk(struct phy *generic_phy)
 		phy->is_ref_clk_enabled = false;
 	}
 }
+EXPORT_SYMBOL_GPL(ufs_qcom_phy_disable_ref_clk);
 
 #define UFS_REF_CLK_EN	(1 << 5)
 
@@ -517,11 +519,13 @@ void ufs_qcom_phy_enable_dev_ref_clk(struct phy *generic_phy)
 {
 	ufs_qcom_phy_dev_ref_clk_ctrl(generic_phy, true);
 }
+EXPORT_SYMBOL_GPL(ufs_qcom_phy_enable_dev_ref_clk);
 
 void ufs_qcom_phy_disable_dev_ref_clk(struct phy *generic_phy)
 {
 	ufs_qcom_phy_dev_ref_clk_ctrl(generic_phy, false);
 }
+EXPORT_SYMBOL_GPL(ufs_qcom_phy_disable_dev_ref_clk);
 
 /* Turn ON M-PHY RMMI interface clocks */
 int ufs_qcom_phy_enable_iface_clk(struct phy *generic_phy)
@@ -550,6 +554,7 @@ int ufs_qcom_phy_enable_iface_clk(struct phy *generic_phy)
 out:
 	return ret;
 }
+EXPORT_SYMBOL_GPL(ufs_qcom_phy_enable_iface_clk);
 
 /* Turn OFF M-PHY RMMI interface clocks */
 void ufs_qcom_phy_disable_iface_clk(struct phy *generic_phy)
@@ -562,6 +567,7 @@ void ufs_qcom_phy_disable_iface_clk(struct phy *generic_phy)
 		phy->is_iface_clk_enabled = false;
 	}
 }
+EXPORT_SYMBOL_GPL(ufs_qcom_phy_disable_iface_clk);
 
 int ufs_qcom_phy_start_serdes(struct phy *generic_phy)
 {
@@ -578,6 +584,7 @@ int ufs_qcom_phy_start_serdes(struct phy *generic_phy)
 
 	return ret;
 }
+EXPORT_SYMBOL_GPL(ufs_qcom_phy_start_serdes);
 
 int ufs_qcom_phy_set_tx_lane_enable(struct phy *generic_phy, u32 tx_lanes)
 {
@@ -595,6 +602,7 @@ int ufs_qcom_phy_set_tx_lane_enable(struct phy *generic_phy, u32 tx_lanes)
 
 	return ret;
 }
+EXPORT_SYMBOL_GPL(ufs_qcom_phy_set_tx_lane_enable);
 
 void ufs_qcom_phy_save_controller_version(struct phy *generic_phy,
 					  u8 major, u16 minor, u16 step)
@@ -605,6 +613,7 @@ void ufs_qcom_phy_save_controller_version(struct phy *generic_phy,
 	ufs_qcom_phy->host_ctrl_rev_minor = minor;
 	ufs_qcom_phy->host_ctrl_rev_step = step;
 }
+EXPORT_SYMBOL_GPL(ufs_qcom_phy_save_controller_version);
 
 int ufs_qcom_phy_calibrate_phy(struct phy *generic_phy, bool is_rate_B)
 {
@@ -625,6 +634,7 @@ int ufs_qcom_phy_calibrate_phy(struct phy *generic_phy, bool is_rate_B)
 
 	return ret;
 }
+EXPORT_SYMBOL_GPL(ufs_qcom_phy_calibrate_phy);
 
 int ufs_qcom_phy_remove(struct phy *generic_phy,
 			struct ufs_qcom_phy *ufs_qcom_phy)
@@ -662,6 +672,7 @@ int ufs_qcom_phy_is_pcs_ready(struct phy *generic_phy)
 	return ufs_qcom_phy->phy_spec_ops->
 			is_physical_coding_sublayer_ready(ufs_qcom_phy);
 }
+EXPORT_SYMBOL_GPL(ufs_qcom_phy_is_pcs_ready);
 
 int ufs_qcom_phy_power_on(struct phy *generic_phy)
 {

drivers/scsi/Kconfig

@@ -541,7 +541,6 @@ config SCSI_ARCMSR
 
 source "drivers/scsi/esas2r/Kconfig"
 source "drivers/scsi/megaraid/Kconfig.megaraid"
-source "drivers/scsi/mpt2sas/Kconfig"
 source "drivers/scsi/mpt3sas/Kconfig"
 source "drivers/scsi/ufs/Kconfig"
 

drivers/scsi/Makefile

@@ -106,7 +106,6 @@ obj-$(CONFIG_CXLFLASH)		+= cxlflash/
 obj-$(CONFIG_MEGARAID_LEGACY)	+= megaraid.o
 obj-$(CONFIG_MEGARAID_NEWGEN)	+= megaraid/
 obj-$(CONFIG_MEGARAID_SAS)	+= megaraid/
-obj-$(CONFIG_SCSI_MPT2SAS)	+= mpt2sas/
 obj-$(CONFIG_SCSI_MPT3SAS)	+= mpt3sas/
 obj-$(CONFIG_SCSI_UFSHCD)	+= ufs/
 obj-$(CONFIG_SCSI_ACARD)	+= atp870u.o

drivers/scsi/aic94xx/aic94xx_init.c

@@ -703,10 +703,10 @@ static int asd_unregister_sas_ha(struct asd_ha_struct *asd_ha)
 {
 	int err;
 
+	scsi_remove_host(asd_ha->sas_ha.core.shost);
 	err = sas_unregister_ha(&asd_ha->sas_ha);
 
 	sas_remove_host(asd_ha->sas_ha.core.shost);
-	scsi_remove_host(asd_ha->sas_ha.core.shost);
 	scsi_host_put(asd_ha->sas_ha.core.shost);
 
 	kfree(asd_ha->sas_ha.sas_phy);

drivers/scsi/be2iscsi/be_main.c

@@ -3186,7 +3186,7 @@ be_sgl_create_contiguous(void *virtual_address,
 {
 	WARN_ON(!virtual_address);
 	WARN_ON(!physical_address);
-	WARN_ON(!length > 0);
+	WARN_ON(!length);
 	WARN_ON(!sgl);
 
 	sgl->va = virtual_address;

drivers/scsi/hpsa.h

@@ -33,12 +33,38 @@ struct access_method {
 	unsigned long (*command_completed)(struct ctlr_info *h, u8 q);
 };
 
+/* for SAS hosts and SAS expanders */
+struct hpsa_sas_node {
+	struct device *parent_dev;
+	struct list_head port_list_head;
+};
+
+struct hpsa_sas_port {
+	struct list_head port_list_entry;
+	u64 sas_address;
+	struct sas_port *port;
+	int next_phy_index;
+	struct list_head phy_list_head;
+	struct hpsa_sas_node *parent_node;
+	struct sas_rphy *rphy;
+};
+
+struct hpsa_sas_phy {
+	struct list_head phy_list_entry;
+	struct sas_phy *phy;
+	struct hpsa_sas_port *parent_port;
+	bool added_to_port;
+};
+
 struct hpsa_scsi_dev_t {
-	int devtype;
+	unsigned int devtype;
 	int bus, target, lun;		/* as presented to the OS */
 	unsigned char scsi3addr[8];	/* as presented to the HW */
+	u8 physical_device : 1;
+	u8 expose_device;
 #define RAID_CTLR_LUNID "\0\0\0\0\0\0\0\0"
 	unsigned char device_id[16];    /* from inquiry pg. 0x83 */
+	u64 sas_address;
 	unsigned char vendor[8];        /* bytes 8-15 of inquiry data */
 	unsigned char model[16];        /* bytes 16-31 of inquiry data */
 	unsigned char raid_level;	/* from inquiry page 0xC1 */
@@ -75,11 +101,8 @@ struct hpsa_scsi_dev_t {
 	struct hpsa_scsi_dev_t *phys_disk[RAID_MAP_MAX_ENTRIES];
 	int nphysical_disks;
 	int supports_aborts;
-#define HPSA_DO_NOT_EXPOSE	0x0
-#define HPSA_SG_ATTACH		0x1
-#define HPSA_ULD_ATTACH		0x2
-#define HPSA_SCSI_ADD		(HPSA_SG_ATTACH | HPSA_ULD_ATTACH)
-	u8 expose_state;
+	struct hpsa_sas_port *sas_port;
+	int external;   /* 1-from external array 0-not <0-unknown */
 };
 
 struct reply_queue_buffer {
@@ -136,6 +159,7 @@ struct ctlr_info {
 	char    *product_name;
 	struct pci_dev *pdev;
 	u32	board_id;
+	u64	sas_address;
 	void __iomem *vaddr;
 	unsigned long paddr;
 	int 	nr_cmds; /* Number of commands allowed on this controller */
@@ -262,7 +286,10 @@ struct ctlr_info {
 	spinlock_t offline_device_lock;
 	struct list_head offline_device_list;
 	int	acciopath_status;
+	int	drv_req_rescan;
 	int	raid_offload_debug;
+	int     discovery_polling;
+	struct  ReportLUNdata *lastlogicals;
 	int	needs_abort_tags_swizzled;
 	struct workqueue_struct *resubmit_wq;
 	struct workqueue_struct *rescan_ctlr_wq;
@@ -270,6 +297,8 @@ struct ctlr_info {
 	wait_queue_head_t abort_cmd_wait_queue;
 	wait_queue_head_t event_sync_wait_queue;
 	struct mutex reset_mutex;
+	u8 reset_in_progress;
+	struct hpsa_sas_node *sas_host;
 };
 
 struct offline_device_entry {
@@ -283,6 +312,7 @@ struct offline_device_entry {
 #define HPSA_RESET_TYPE_BUS 0x01
 #define HPSA_RESET_TYPE_TARGET 0x03
 #define HPSA_RESET_TYPE_LUN 0x04
+#define HPSA_PHYS_TARGET_RESET 0x99 /* not defined by cciss spec */
 #define HPSA_MSG_SEND_RETRY_LIMIT 10
 #define HPSA_MSG_SEND_RETRY_INTERVAL_MSECS (10000)
 
@@ -367,6 +397,11 @@ struct offline_device_entry {
 #define IOACCEL2_INBOUND_POSTQ_64_LOW	0xd0
 #define IOACCEL2_INBOUND_POSTQ_64_HI	0xd4
 
+#define HPSA_PHYSICAL_DEVICE_BUS	0
+#define HPSA_RAID_VOLUME_BUS		1
+#define HPSA_EXTERNAL_RAID_VOLUME_BUS	2
+#define HPSA_HBA_BUS			3
+
 /*
 	Send the command to the hardware
 */

drivers/scsi/hpsa_cmd.h

@@ -260,8 +260,6 @@ struct ext_report_lun_entry {
 	u8 wwid[8];
 	u8 device_type;
 	u8 device_flags;
-#define NON_DISK_PHYS_DEV(x) ((x)[17] & 0x01)
-#define PHYS_IOACCEL(x) ((x)[17] & 0x08)
 	u8 lun_count; /* multi-lun device, how many luns */
 	u8 redundant_paths;
 	u32 ioaccel_handle; /* ioaccel1 only uses lower 16 bits */
@@ -288,6 +286,11 @@ struct SenseSubsystem_info {
 #define BMIC_FLASH_FIRMWARE 0xF7
 #define BMIC_SENSE_CONTROLLER_PARAMETERS 0x64
 #define BMIC_IDENTIFY_PHYSICAL_DEVICE 0x15
+#define BMIC_IDENTIFY_CONTROLLER 0x11
+#define BMIC_SET_DIAG_OPTIONS 0xF4
+#define BMIC_SENSE_DIAG_OPTIONS 0xF5
+#define HPSA_DIAG_OPTS_DISABLE_RLD_CACHING 0x40000000
+#define BMIC_SENSE_SUBSYSTEM_INFORMATION 0x66
 
 /* Command List Structure */
 union SCSI3Addr {
@@ -684,6 +687,16 @@ struct hpsa_pci_info {
 	u32		board_id;
 };
 
+struct bmic_identify_controller {
+	u8	configured_logical_drive_count;	/* offset 0 */
+	u8	pad1[153];
+	__le16	extended_logical_unit_count;	/* offset 154 */
+	u8	pad2[136];
+	u8	controller_mode;	/* offset 292 */
+	u8	pad3[32];
+};
+
+
 struct bmic_identify_physical_device {
 	u8    scsi_bus;          /* SCSI Bus number on controller */
 	u8    scsi_id;           /* SCSI ID on this bus */
@@ -816,5 +829,18 @@ struct bmic_identify_physical_device {
 	u8     padding[112];
 };
 
+struct bmic_sense_subsystem_info {
+	u8	primary_slot_number;
+	u8	reserved[3];
+	u8	chasis_serial_number[32];
+	u8	primary_world_wide_id[8];
+	u8	primary_array_serial_number[32]; /* NULL terminated */
+	u8	primary_cache_serial_number[32]; /* NULL terminated */
+	u8	reserved_2[8];
+	u8	secondary_array_serial_number[32];
+	u8	secondary_cache_serial_number[32];
+	u8	pad[332];
+};
+
 #pragma pack()
 #endif /* HPSA_CMD_H */

drivers/scsi/ibmvscsi/ibmvscsi.c

@@ -106,9 +106,9 @@ MODULE_LICENSE("GPL");
 MODULE_VERSION(IBMVSCSI_VERSION);
 
 module_param_named(max_id, max_id, int, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(max_id, "Largest ID value for each channel");
+MODULE_PARM_DESC(max_id, "Largest ID value for each channel [Default=64]");
 module_param_named(max_channel, max_channel, int, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(max_channel, "Largest channel value");
+MODULE_PARM_DESC(max_channel, "Largest channel value [Default=3]");
 module_param_named(init_timeout, init_timeout, int, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(init_timeout, "Initialization timeout in seconds");
 module_param_named(max_requests, max_requests, int, S_IRUGO);
@@ -2289,11 +2289,15 @@ static int ibmvscsi_probe(struct vio_dev *vdev, const struct vio_device_id *id)
 		goto init_pool_failed;
 	}
 
-	host->max_lun = 8;
+	host->max_lun = IBMVSCSI_MAX_LUN;
 	host->max_id = max_id;
 	host->max_channel = max_channel;
 	host->max_cmd_len = 16;
 
+	dev_info(dev,
+		 "Maximum ID: %d Maximum LUN: %llu Maximum Channel: %d\n",
+		 host->max_id, host->max_lun, host->max_channel);
+
 	if (scsi_add_host(hostdata->host, hostdata->dev))
 		goto add_host_failed;
 

drivers/scsi/ibmvscsi/ibmvscsi.h

@@ -48,6 +48,7 @@ struct Scsi_Host;
 #define IBMVSCSI_CMDS_PER_LUN_DEFAULT 16
 #define IBMVSCSI_MAX_SECTORS_DEFAULT 256 /* 32 * 8 = default max I/O 32 pages */
 #define IBMVSCSI_MAX_CMDS_PER_LUN 64
+#define IBMVSCSI_MAX_LUN 32
 
 /* ------------------------------------------------------------
  * Data Structures

drivers/scsi/ipr.c

@@ -6363,15 +6363,19 @@ static int ipr_queuecommand(struct Scsi_Host *shost,
 	ipr_cmd->scsi_cmd = scsi_cmd;
 	ipr_cmd->done = ipr_scsi_eh_done;
 
-	if (ipr_is_gscsi(res) || ipr_is_vset_device(res)) {
+	if (ipr_is_gscsi(res)) {
 		if (scsi_cmd->underflow == 0)
 			ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_NO_ULEN_CHK;
 
-		ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_NO_LINK_DESC;
-		if (ipr_is_gscsi(res) && res->reset_occurred) {
+		if (res->reset_occurred) {
 			res->reset_occurred = 0;
 			ioarcb->cmd_pkt.flags_lo |= IPR_FLAGS_LO_DELAY_AFTER_RST;
 		}
+	}
+
+	if (ipr_is_gscsi(res) || ipr_is_vset_device(res)) {
+		ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_NO_LINK_DESC;
+
 		ioarcb->cmd_pkt.flags_lo |= IPR_FLAGS_LO_ALIGNED_BFR;
 		if (scsi_cmd->flags & SCMD_TAGGED)
 			ioarcb->cmd_pkt.flags_lo |= IPR_FLAGS_LO_SIMPLE_TASK;
@@ -7670,6 +7674,63 @@ static int ipr_ioafp_query_ioa_cfg(struct ipr_cmnd *ipr_cmd)
 	return IPR_RC_JOB_RETURN;
 }
 
+static int ipr_ioa_service_action_failed(struct ipr_cmnd *ipr_cmd)
+{
+	u32 ioasc = be32_to_cpu(ipr_cmd->s.ioasa.hdr.ioasc);
+
+	if (ioasc == IPR_IOASC_IR_INVALID_REQ_TYPE_OR_PKT)
+		return IPR_RC_JOB_CONTINUE;
+
+	return ipr_reset_cmd_failed(ipr_cmd);
+}
+
+static void ipr_build_ioa_service_action(struct ipr_cmnd *ipr_cmd,
+					 __be32 res_handle, u8 sa_code)
+{
+	struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb;
+
+	ioarcb->res_handle = res_handle;
+	ioarcb->cmd_pkt.cdb[0] = IPR_IOA_SERVICE_ACTION;
+	ioarcb->cmd_pkt.cdb[1] = sa_code;
+	ioarcb->cmd_pkt.request_type = IPR_RQTYPE_IOACMD;
+}
+
+/**
+ * ipr_ioafp_set_caching_parameters - Issue Set Cache parameters service
+ * action
+ *
+ * Return value:
+ *	none
+ **/
+static int ipr_ioafp_set_caching_parameters(struct ipr_cmnd *ipr_cmd)
+{
+	struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb;
+	struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
+	struct ipr_inquiry_pageC4 *pageC4 = &ioa_cfg->vpd_cbs->pageC4_data;
+
+	ENTER;
+
+	ipr_cmd->job_step = ipr_ioafp_query_ioa_cfg;
+
+	if (pageC4->cache_cap[0] & IPR_CAP_SYNC_CACHE) {
+		ipr_build_ioa_service_action(ipr_cmd,
+					     cpu_to_be32(IPR_IOA_RES_HANDLE),
+					     IPR_IOA_SA_CHANGE_CACHE_PARAMS);
+
+		ioarcb->cmd_pkt.cdb[2] = 0x40;
+
+		ipr_cmd->job_step_failed = ipr_ioa_service_action_failed;
+		ipr_do_req(ipr_cmd, ipr_reset_ioa_job, ipr_timeout,
+			   IPR_SET_SUP_DEVICE_TIMEOUT);
+
+		LEAVE;
+		return IPR_RC_JOB_RETURN;
+	}
+
+	LEAVE;
+	return IPR_RC_JOB_CONTINUE;
+}
+
 /**
  * ipr_ioafp_inquiry - Send an Inquiry to the adapter.
  * @ipr_cmd:	ipr command struct
@@ -7720,6 +7781,39 @@ static int ipr_inquiry_page_supported(struct ipr_inquiry_page0 *page0, u8 page)
 	return 0;
 }
 
+/**
+ * ipr_ioafp_pageC4_inquiry - Send a Page 0xC4 Inquiry to the adapter.
+ * @ipr_cmd:	ipr command struct
+ *
+ * This function sends a Page 0xC4 inquiry to the adapter
+ * to retrieve software VPD information.
+ *
+ * Return value:
+ *	IPR_RC_JOB_CONTINUE / IPR_RC_JOB_RETURN
+ **/
+static int ipr_ioafp_pageC4_inquiry(struct ipr_cmnd *ipr_cmd)
+{
+	struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
+	struct ipr_inquiry_page0 *page0 = &ioa_cfg->vpd_cbs->page0_data;
+	struct ipr_inquiry_pageC4 *pageC4 = &ioa_cfg->vpd_cbs->pageC4_data;
+
+	ENTER;
+	ipr_cmd->job_step = ipr_ioafp_set_caching_parameters;
+	memset(pageC4, 0, sizeof(*pageC4));
+
+	if (ipr_inquiry_page_supported(page0, 0xC4)) {
+		ipr_ioafp_inquiry(ipr_cmd, 1, 0xC4,
+				  (ioa_cfg->vpd_cbs_dma
+				   + offsetof(struct ipr_misc_cbs,
+					      pageC4_data)),
+				  sizeof(struct ipr_inquiry_pageC4));
+		return IPR_RC_JOB_RETURN;
+	}
+
+	LEAVE;
+	return IPR_RC_JOB_CONTINUE;
+}
+
 /**
  * ipr_ioafp_cap_inquiry - Send a Page 0xD0 Inquiry to the adapter.
  * @ipr_cmd:	ipr command struct
@@ -7737,7 +7831,7 @@ static int ipr_ioafp_cap_inquiry(struct ipr_cmnd *ipr_cmd)
 	struct ipr_inquiry_cap *cap = &ioa_cfg->vpd_cbs->cap;
 
 	ENTER;
-	ipr_cmd->job_step = ipr_ioafp_query_ioa_cfg;
+	ipr_cmd->job_step = ipr_ioafp_pageC4_inquiry;
 	memset(cap, 0, sizeof(*cap));
 
 	if (ipr_inquiry_page_supported(page0, 0xD0)) {
@@ -8276,6 +8370,42 @@ static int ipr_reset_get_unit_check_job(struct ipr_cmnd *ipr_cmd)
 	return IPR_RC_JOB_RETURN;
 }
 
+static int ipr_dump_mailbox_wait(struct ipr_cmnd *ipr_cmd)
+{
+	struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
+
+	ENTER;
+
+	if (ioa_cfg->sdt_state != GET_DUMP)
+		return IPR_RC_JOB_RETURN;
+
+	if (!ioa_cfg->sis64 || !ipr_cmd->u.time_left ||
+	    (readl(ioa_cfg->regs.sense_interrupt_reg) &
+	     IPR_PCII_MAILBOX_STABLE)) {
+
+		if (!ipr_cmd->u.time_left)
+			dev_err(&ioa_cfg->pdev->dev,
+				"Timed out waiting for Mailbox register.\n");
+
+		ioa_cfg->sdt_state = READ_DUMP;
+		ioa_cfg->dump_timeout = 0;
+		if (ioa_cfg->sis64)
+			ipr_reset_start_timer(ipr_cmd, IPR_SIS64_DUMP_TIMEOUT);
+		else
+			ipr_reset_start_timer(ipr_cmd, IPR_SIS32_DUMP_TIMEOUT);
+		ipr_cmd->job_step = ipr_reset_wait_for_dump;
+		schedule_work(&ioa_cfg->work_q);
+
+	} else {
+		ipr_cmd->u.time_left -= IPR_CHECK_FOR_RESET_TIMEOUT;
+		ipr_reset_start_timer(ipr_cmd,
+				      IPR_CHECK_FOR_RESET_TIMEOUT);
+	}
+
+	LEAVE;
+	return IPR_RC_JOB_RETURN;
+}
+
 /**
  * ipr_reset_restore_cfg_space - Restore PCI config space.
  * @ipr_cmd:	ipr command struct
@@ -8325,20 +8455,11 @@ static int ipr_reset_restore_cfg_space(struct ipr_cmnd *ipr_cmd)
 
 	if (ioa_cfg->in_ioa_bringdown) {
 		ipr_cmd->job_step = ipr_ioa_bringdown_done;
+	} else if (ioa_cfg->sdt_state == GET_DUMP) {
+		ipr_cmd->job_step = ipr_dump_mailbox_wait;
+		ipr_cmd->u.time_left = IPR_WAIT_FOR_MAILBOX;
 	} else {
 		ipr_cmd->job_step = ipr_reset_enable_ioa;
-
-		if (GET_DUMP == ioa_cfg->sdt_state) {
-			ioa_cfg->sdt_state = READ_DUMP;
-			ioa_cfg->dump_timeout = 0;
-			if (ioa_cfg->sis64)
-				ipr_reset_start_timer(ipr_cmd, IPR_SIS64_DUMP_TIMEOUT);
-			else
-				ipr_reset_start_timer(ipr_cmd, IPR_SIS32_DUMP_TIMEOUT);
-			ipr_cmd->job_step = ipr_reset_wait_for_dump;
-			schedule_work(&ioa_cfg->work_q);
-			return IPR_RC_JOB_RETURN;
-		}
 	}
 
 	LEAVE;

drivers/scsi/ipr.h

@@ -39,8 +39,8 @@
 /*
  * Literals
  */
-#define IPR_DRIVER_VERSION "2.6.2"
-#define IPR_DRIVER_DATE "(June 11, 2015)"
+#define IPR_DRIVER_VERSION "2.6.3"
+#define IPR_DRIVER_DATE "(October 17, 2015)"
 
 /*
  * IPR_MAX_CMD_PER_LUN: This defines the maximum number of outstanding
@@ -216,6 +216,10 @@
 #define IPR_SET_ALL_SUPPORTED_DEVICES			0x80
 #define IPR_IOA_SHUTDOWN				0xF7
 #define	IPR_WR_BUF_DOWNLOAD_AND_SAVE			0x05
+#define IPR_IOA_SERVICE_ACTION				0xD2
+
+/* IOA Service Actions */
+#define IPR_IOA_SA_CHANGE_CACHE_PARAMS			0x14
 
 /*
  * Timeouts
@@ -279,6 +283,9 @@
 #define IPR_IPL_INIT_STAGE_TIME_MASK			0x0000ffff
 #define IPR_PCII_IPL_STAGE_CHANGE			(0x80000000 >> 0)
 
+#define IPR_PCII_MAILBOX_STABLE				(0x80000000 >> 4)
+#define IPR_WAIT_FOR_MAILBOX				(2 * HZ)
+
 #define IPR_PCII_IOA_TRANS_TO_OPER			(0x80000000 >> 0)
 #define IPR_PCII_IOARCB_XFER_FAILED			(0x80000000 >> 3)
 #define IPR_PCII_IOA_UNIT_CHECKED			(0x80000000 >> 4)
@@ -846,6 +853,16 @@ struct ipr_inquiry_page0 {
 	u8 page[IPR_INQUIRY_PAGE0_ENTRIES];
 }__attribute__((packed));
 
+struct ipr_inquiry_pageC4 {
+	u8 peri_qual_dev_type;
+	u8 page_code;
+	u8 reserved1;
+	u8 len;
+	u8 cache_cap[4];
+#define IPR_CAP_SYNC_CACHE		0x08
+	u8 reserved2[20];
+} __packed;
+
 struct ipr_hostrcb_device_data_entry {
 	struct ipr_vpd vpd;
 	struct ipr_res_addr dev_res_addr;
@@ -1319,6 +1336,7 @@ struct ipr_misc_cbs {
 	struct ipr_inquiry_page0 page0_data;
 	struct ipr_inquiry_page3 page3_data;
 	struct ipr_inquiry_cap cap;
+	struct ipr_inquiry_pageC4 pageC4_data;
 	struct ipr_mode_pages mode_pages;
 	struct ipr_supported_device supp_dev;
 };

drivers/scsi/isci/init.c

@@ -271,11 +271,11 @@ static void isci_unregister(struct isci_host *isci_host)
 	if (!isci_host)
 		return;
 
+	shost = to_shost(isci_host);
+	scsi_remove_host(shost);
 	sas_unregister_ha(&isci_host->sas_ha);
 
-	shost = to_shost(isci_host);
 	sas_remove_host(shost);
-	scsi_remove_host(shost);
 	scsi_host_put(shost);
 }
 

drivers/scsi/megaraid/megaraid_sas.h

@@ -35,8 +35,8 @@
 /*
  * MegaRAID SAS Driver meta data
  */
-#define MEGASAS_VERSION				"06.807.10.00-rc1"
-#define MEGASAS_RELDATE				"March 6, 2015"
+#define MEGASAS_VERSION				"06.808.16.00-rc1"
+#define MEGASAS_RELDATE				"Oct. 8, 2015"
 
 /*
  * Device IDs
@@ -52,6 +52,10 @@
 #define PCI_DEVICE_ID_LSI_PLASMA		0x002f
 #define PCI_DEVICE_ID_LSI_INVADER		0x005d
 #define PCI_DEVICE_ID_LSI_FURY			0x005f
+#define PCI_DEVICE_ID_LSI_INTRUDER		0x00ce
+#define PCI_DEVICE_ID_LSI_INTRUDER_24		0x00cf
+#define PCI_DEVICE_ID_LSI_CUTLASS_52		0x0052
+#define PCI_DEVICE_ID_LSI_CUTLASS_53		0x0053
 
 /*
  * Intel HBA SSDIDs
@@ -62,6 +66,14 @@
 #define MEGARAID_INTEL_RS3MC044_SSDID		0x9381
 #define MEGARAID_INTEL_RS3WC080_SSDID		0x9341
 #define MEGARAID_INTEL_RS3WC040_SSDID		0x9343
+#define MEGARAID_INTEL_RMS3BC160_SSDID		0x352B
+
+/*
+ * Intruder HBA SSDIDs
+ */
+#define MEGARAID_INTRUDER_SSDID1		0x9371
+#define MEGARAID_INTRUDER_SSDID2		0x9390
+#define MEGARAID_INTRUDER_SSDID3		0x9370
 
 /*
  * Intel HBA branding
@@ -78,6 +90,8 @@
 	"Intel(R) RAID Controller RS3WC080"
 #define MEGARAID_INTEL_RS3WC040_BRANDING	\
 	"Intel(R) RAID Controller RS3WC040"
+#define MEGARAID_INTEL_RMS3BC160_BRANDING	\
+	"Intel(R) Integrated RAID Module RMS3BC160"
 
 /*
  * =====================================
@@ -273,6 +287,16 @@ enum MFI_STAT {
 	MFI_STAT_INVALID_STATUS = 0xFF
 };
 
+enum mfi_evt_class {
+	MFI_EVT_CLASS_DEBUG =		-2,
+	MFI_EVT_CLASS_PROGRESS =	-1,
+	MFI_EVT_CLASS_INFO =		0,
+	MFI_EVT_CLASS_WARNING =		1,
+	MFI_EVT_CLASS_CRITICAL =	2,
+	MFI_EVT_CLASS_FATAL =		3,
+	MFI_EVT_CLASS_DEAD =		4
+};
+
 /*
  * Crash dump related defines
  */
@@ -364,6 +388,8 @@ enum MR_EVT_ARGS {
 	MR_EVT_ARGS_GENERIC,
 };
 
+
+#define SGE_BUFFER_SIZE	4096
 /*
  * define constants for device list query options
  */
@@ -394,6 +420,7 @@ enum MR_LD_QUERY_TYPE {
 #define MR_EVT_FOREIGN_CFG_IMPORTED                     0x00db
 #define MR_EVT_LD_OFFLINE                               0x00fc
 #define MR_EVT_CTRL_HOST_BUS_SCAN_REQUESTED             0x0152
+#define MR_EVT_CTRL_PROP_CHANGED			0x012f
 
 enum MR_PD_STATE {
 	MR_PD_STATE_UNCONFIGURED_GOOD   = 0x00,
@@ -973,7 +1000,12 @@ struct megasas_ctrl_info {
 
 	struct {
 #if defined(__BIG_ENDIAN_BITFIELD)
-		u32     reserved:12;
+		u32     reserved:7;
+		u32     useSeqNumJbodFP:1;
+		u32     supportExtendedSSCSize:1;
+		u32     supportDiskCacheSettingForSysPDs:1;
+		u32     supportCPLDUpdate:1;
+		u32     supportTTYLogCompression:1;
 		u32     discardCacheDuringLDDelete:1;
 		u32     supportSecurityonJBOD:1;
 		u32     supportCacheBypassModes:1;
@@ -1013,7 +1045,12 @@ struct megasas_ctrl_info {
 		u32     supportCacheBypassModes:1;
 		u32     supportSecurityonJBOD:1;
 		u32     discardCacheDuringLDDelete:1;
-		u32     reserved:12;
+		u32     supportTTYLogCompression:1;
+		u32     supportCPLDUpdate:1;
+		u32     supportDiskCacheSettingForSysPDs:1;
+		u32     supportExtendedSSCSize:1;
+		u32     useSeqNumJbodFP:1;
+		u32     reserved:7;
 #endif
 	} adapterOperations3;
 
@@ -1229,7 +1266,9 @@ union megasas_sgl_frame {
 typedef union _MFI_CAPABILITIES {
 	struct {
 #if   defined(__BIG_ENDIAN_BITFIELD)
-		u32     reserved:25;
+		u32     reserved:23;
+		u32     support_ext_io_size:1;
+		u32	support_ext_queue_depth:1;
 		u32     security_protocol_cmds_fw:1;
 		u32     support_core_affinity:1;
 		u32     support_ndrive_r1_lb:1;
@@ -1245,7 +1284,9 @@ typedef union _MFI_CAPABILITIES {
 		u32     support_ndrive_r1_lb:1;
 		u32     support_core_affinity:1;
 		u32     security_protocol_cmds_fw:1;
-		u32     reserved:25;
+		u32	support_ext_queue_depth:1;
+		u32     support_ext_io_size:1;
+		u32     reserved:23;
 #endif
 	} mfi_capabilities;
 	__le32		reg;
@@ -1690,6 +1731,7 @@ struct megasas_instance {
 	u32 crash_dump_drv_support;
 	u32 crash_dump_app_support;
 	u32 secure_jbod_support;
+	bool use_seqnum_jbod_fp;   /* Added for PD sequence */
 	spinlock_t crashdump_lock;
 
 	struct megasas_register_set __iomem *reg_set;
@@ -1748,6 +1790,7 @@ struct megasas_instance {
 	u8 UnevenSpanSupport;
 
 	u8 supportmax256vd;
+	u8 allow_fw_scan;
 	u16 fw_supported_vd_count;
 	u16 fw_supported_pd_count;
 
@@ -1769,7 +1812,9 @@ struct megasas_instance {
 	struct msix_entry msixentry[MEGASAS_MAX_MSIX_QUEUES];
 	struct megasas_irq_context irq_context[MEGASAS_MAX_MSIX_QUEUES];
 	u64 map_id;
+	u64 pd_seq_map_id;
 	struct megasas_cmd *map_update_cmd;
+	struct megasas_cmd *jbod_seq_cmd;
 	unsigned long bar;
 	long reset_flags;
 	struct mutex reset_mutex;
@@ -1780,6 +1825,7 @@ struct megasas_instance {
 	char mpio;
 	u16 throttlequeuedepth;
 	u8 mask_interrupts;
+	u16 max_chain_frame_sz;
 	u8 is_imr;
 	bool dev_handle;
 };
@@ -1985,6 +2031,9 @@ __le16 get_updated_dev_handle(struct megasas_instance *instance,
 void mr_update_load_balance_params(struct MR_DRV_RAID_MAP_ALL *map,
 	struct LD_LOAD_BALANCE_INFO *lbInfo);
 int megasas_get_ctrl_info(struct megasas_instance *instance);
+/* PD sequence */
+int
+megasas_sync_pd_seq_num(struct megasas_instance *instance, bool pend);
 int megasas_set_crash_dump_params(struct megasas_instance *instance,
 	u8 crash_buf_state);
 void megasas_free_host_crash_buffer(struct megasas_instance *instance);
@@ -2000,5 +2049,6 @@ void __megasas_return_cmd(struct megasas_instance *instance,
 void megasas_return_mfi_mpt_pthr(struct megasas_instance *instance,
 	struct megasas_cmd *cmd_mfi, struct megasas_cmd_fusion *cmd_fusion);
 int megasas_cmd_type(struct scsi_cmnd *cmd);
+void megasas_setup_jbod_map(struct megasas_instance *instance);
 
 #endif				/*LSI_MEGARAID_SAS_H */

drivers/scsi/megaraid/megaraid_sas_fp.c

@@ -741,14 +741,12 @@ static u8 mr_spanset_get_phy_params(struct megasas_instance *instance, u32 ld,
 	u8      physArm, span;
 	u64     row;
 	u8	retval = TRUE;
-	u8	do_invader = 0;
 	u64	*pdBlock = &io_info->pdBlock;
 	__le16	*pDevHandle = &io_info->devHandle;
 	u32	logArm, rowMod, armQ, arm;
+	struct fusion_context *fusion;
 
-	if ((instance->pdev->device == PCI_DEVICE_ID_LSI_INVADER ||
-		instance->pdev->device == PCI_DEVICE_ID_LSI_FURY))
-		do_invader = 1;
+	fusion = instance->ctrl_context;
 
 	/*Get row and span from io_info for Uneven Span IO.*/
 	row	    = io_info->start_row;
@@ -779,7 +777,8 @@ static u8 mr_spanset_get_phy_params(struct megasas_instance *instance, u32 ld,
 	else {
 		*pDevHandle = cpu_to_le16(MR_PD_INVALID);
 		if ((raid->level >= 5) &&
-			(!do_invader  || (do_invader &&
+			((fusion->adapter_type == THUNDERBOLT_SERIES)  ||
+			((fusion->adapter_type == INVADER_SERIES) &&
 			(raid->regTypeReqOnRead != REGION_TYPE_UNUSED))))
 			pRAID_Context->regLockFlags = REGION_TYPE_EXCLUSIVE;
 		else if (raid->level == 1) {
@@ -823,13 +822,12 @@ u8 MR_GetPhyParams(struct megasas_instance *instance, u32 ld, u64 stripRow,
 	u8          physArm, span;
 	u64         row;
 	u8	    retval = TRUE;
-	u8          do_invader = 0;
 	u64	    *pdBlock = &io_info->pdBlock;
 	__le16	    *pDevHandle = &io_info->devHandle;
+	struct fusion_context *fusion;
+
+	fusion = instance->ctrl_context;
 
-	if ((instance->pdev->device == PCI_DEVICE_ID_LSI_INVADER ||
-		instance->pdev->device == PCI_DEVICE_ID_LSI_FURY))
-		do_invader = 1;
 
 	row =  mega_div64_32(stripRow, raid->rowDataSize);
 
@@ -875,7 +873,8 @@ u8 MR_GetPhyParams(struct megasas_instance *instance, u32 ld, u64 stripRow,
 		/* set dev handle as invalid. */
 		*pDevHandle = cpu_to_le16(MR_PD_INVALID);
 		if ((raid->level >= 5) &&
-			(!do_invader  || (do_invader &&
+			((fusion->adapter_type == THUNDERBOLT_SERIES)  ||
+			((fusion->adapter_type == INVADER_SERIES) &&
 			(raid->regTypeReqOnRead != REGION_TYPE_UNUSED))))
 			pRAID_Context->regLockFlags = REGION_TYPE_EXCLUSIVE;
 		else if (raid->level == 1) {
@@ -909,6 +908,7 @@ MR_BuildRaidContext(struct megasas_instance *instance,
 		    struct RAID_CONTEXT *pRAID_Context,
 		    struct MR_DRV_RAID_MAP_ALL *map, u8 **raidLUN)
 {
+	struct fusion_context *fusion;
 	struct MR_LD_RAID  *raid;
 	u32         ld, stripSize, stripe_mask;
 	u64         endLba, endStrip, endRow, start_row, start_strip;
@@ -929,6 +929,7 @@ MR_BuildRaidContext(struct megasas_instance *instance,
 	isRead = io_info->isRead;
 	io_info->IoforUnevenSpan = 0;
 	io_info->start_span	= SPAN_INVALID;
+	fusion = instance->ctrl_context;
 
 	ld = MR_TargetIdToLdGet(ldTgtId, map);
 	raid = MR_LdRaidGet(ld, map);
@@ -1092,8 +1093,7 @@ MR_BuildRaidContext(struct megasas_instance *instance,
 		cpu_to_le16(raid->fpIoTimeoutForLd ?
 			    raid->fpIoTimeoutForLd :
 			    map->raidMap.fpPdIoTimeoutSec);
-	if ((instance->pdev->device == PCI_DEVICE_ID_LSI_INVADER) ||
-		(instance->pdev->device == PCI_DEVICE_ID_LSI_FURY))
+	if (fusion->adapter_type == INVADER_SERIES)
 		pRAID_Context->regLockFlags = (isRead) ?
 			raid->regTypeReqOnRead : raid->regTypeReqOnWrite;
 	else
@@ -1198,10 +1198,6 @@ void mr_update_span_set(struct MR_DRV_RAID_MAP_ALL *map,
 						span_row_width +=
 							MR_LdSpanPtrGet
 							(ld, count, map)->spanRowDataSize;
-						printk(KERN_INFO "megasas:"
-							"span %x rowDataSize %x\n",
-							count, MR_LdSpanPtrGet
-							(ld, count, map)->spanRowDataSize);
 					}
 				}
 

drivers/scsi/megaraid/megaraid_sas_fusion.h

@@ -35,8 +35,13 @@
 #define _MEGARAID_SAS_FUSION_H_
 
 /* Fusion defines */
-#define MEGASAS_MAX_SZ_CHAIN_FRAME 1024
+#define MEGASAS_CHAIN_FRAME_SZ_MIN 1024
 #define MFI_FUSION_ENABLE_INTERRUPT_MASK (0x00000009)
+#define MEGASAS_MAX_CHAIN_SHIFT			5
+#define MEGASAS_MAX_CHAIN_SIZE_UNITS_MASK	0x400000
+#define MEGASAS_MAX_CHAIN_SIZE_MASK		0x3E0
+#define MEGASAS_256K_IO				128
+#define MEGASAS_1MB_IO				(MEGASAS_256K_IO * 4)
 #define MEGA_MPI2_RAID_DEFAULT_IO_FRAME_SIZE 256
 #define MEGASAS_MPI2_FUNCTION_PASSTHRU_IO_REQUEST   0xF0
 #define MEGASAS_MPI2_FUNCTION_LD_IO_REQUEST         0xF1
@@ -89,6 +94,12 @@ enum MR_RAID_FLAGS_IO_SUB_TYPE {
 #define MEGASAS_FP_CMD_LEN	16
 #define MEGASAS_FUSION_IN_RESET 0
 #define THRESHOLD_REPLY_COUNT 50
+#define JBOD_MAPS_COUNT	2
+
+enum MR_FUSION_ADAPTER_TYPE {
+	THUNDERBOLT_SERIES = 0,
+	INVADER_SERIES = 1,
+};
 
 /*
  * Raid Context structure which describes MegaRAID specific IO Parameters
@@ -117,7 +128,9 @@ struct RAID_CONTEXT {
 	u8      numSGE;
 	__le16	configSeqNum;
 	u8      spanArm;
-	u8      resvd2[3];
+	u8      priority;
+	u8	numSGEExt;
+	u8      resvd2;
 };
 
 #define RAID_CTX_SPANARM_ARM_SHIFT	(0)
@@ -486,6 +499,7 @@ struct MPI2_IOC_INIT_REQUEST {
 #define MAX_PHYSICAL_DEVICES 256
 #define MAX_RAIDMAP_PHYSICAL_DEVICES (MAX_PHYSICAL_DEVICES)
 #define MR_DCMD_LD_MAP_GET_INFO             0x0300e101
+#define MR_DCMD_SYSTEM_PD_MAP_GET_INFO      0x0200e102
 #define MR_DCMD_CTRL_SHARED_HOST_MEM_ALLOC  0x010e8485   /* SR-IOV HB alloc*/
 #define MR_DCMD_LD_VF_MAP_GET_ALL_LDS_111   0x03200200
 #define MR_DCMD_LD_VF_MAP_GET_ALL_LDS       0x03150200
@@ -789,6 +803,21 @@ struct MR_FW_RAID_MAP_EXT {
 	struct MR_LD_SPAN_MAP      ldSpanMap[MAX_LOGICAL_DRIVES_EXT];
 };
 
+/*
+ *  * define MR_PD_CFG_SEQ structure for system PDs
+ *   */
+struct MR_PD_CFG_SEQ {
+	__le16 seqNum;
+	__le16 devHandle;
+	u8  reserved[4];
+} __packed;
+
+struct MR_PD_CFG_SEQ_NUM_SYNC {
+	__le32 size;
+	__le32 count;
+	struct MR_PD_CFG_SEQ seq[1];
+} __packed;
+
 struct fusion_context {
 	struct megasas_cmd_fusion **cmd_list;
 	dma_addr_t req_frames_desc_phys;
@@ -828,9 +857,12 @@ struct fusion_context {
 	u32 current_map_sz;
 	u32 drv_map_sz;
 	u32 drv_map_pages;
+	struct MR_PD_CFG_SEQ_NUM_SYNC	*pd_seq_sync[JBOD_MAPS_COUNT];
+	dma_addr_t pd_seq_phys[JBOD_MAPS_COUNT];
 	u8 fast_path_io;
 	struct LD_LOAD_BALANCE_INFO load_balance_info[MAX_LOGICAL_DRIVES_EXT];
 	LD_SPAN_INFO log_to_span[MAX_LOGICAL_DRIVES_EXT];
+	u8 adapter_type;
 };
 
 union desc_value {

drivers/scsi/mpt2sas/Kconfig

-#
-# Kernel configuration file for the MPT2SAS
-#
-# This code is based on drivers/scsi/mpt2sas/Kconfig
-# Copyright (C) 2007-2014  LSI Corporation
-#  (mailto:DL-MPTFusionLinux@lsi.com)
-
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# NO WARRANTY
-# THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
-# CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
-# LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
-# MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
-# solely responsible for determining the appropriateness of using and
-# distributing the Program and assumes all risks associated with its
-# exercise of rights under this Agreement, including but not limited to
-# the risks and costs of program errors, damage to or loss of data,
-# programs or equipment, and unavailability or interruption of operations.
-
-# DISCLAIMER OF LIABILITY
-# NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
-# DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-# DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
-# ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
-# TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
-# USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
-# HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301,
-# USA.
-
-config SCSI_MPT2SAS
-	tristate "LSI MPT Fusion SAS 2.0 Device Driver"
-	depends on PCI && SCSI
-	select SCSI_SAS_ATTRS
-	select RAID_ATTRS
-	---help---
-	This driver supports PCI-Express SAS 6Gb/s Host Adapters.
-
-config SCSI_MPT2SAS_MAX_SGE
-	int "LSI MPT Fusion Max number of SG Entries (16 - 128)"
-	depends on PCI && SCSI && SCSI_MPT2SAS
-	default "128"
-	range 16 128
-	---help---
-	This option allows you to specify the maximum number of scatter-
-	gather entries per I/O. The driver default is 128, which matches
-	SAFE_PHYS_SEGMENTS.  However, it may decreased down to 16.
-	Decreasing this parameter will reduce memory requirements
-	on a per controller instance.
-
-config SCSI_MPT2SAS_LOGGING
-	bool "LSI MPT Fusion logging facility"
-	depends on PCI && SCSI && SCSI_MPT2SAS
-	---help---
-	This turns on a logging facility.

drivers/scsi/mpt2sas/Makefile

-# mpt2sas makefile
-obj-$(CONFIG_SCSI_MPT2SAS) += mpt2sas.o
-mpt2sas-y +=  mpt2sas_base.o        \
-		mpt2sas_config.o    \
-		mpt2sas_scsih.o     \
-		mpt2sas_transport.o \
-		mpt2sas_ctl.o

drivers/scsi/mpt2sas/mpi/mpi2_type.h

-/*
- *  Copyright (c) 2000-2014 LSI Corporation.
- *
- *
- *           Name:  mpi2_type.h
- *          Title:  MPI basic type definitions
- *  Creation Date:  August 16, 2006
- *
- *    mpi2_type.h Version:  02.00.00
- *
- *  Version History
- *  ---------------
- *
- *  Date      Version   Description
- *  --------  --------  ------------------------------------------------------
- *  04-30-07  02.00.00  Corresponds to Fusion-MPT MPI Specification Rev A.
- *  --------------------------------------------------------------------------
- */
-
-#ifndef MPI2_TYPE_H
-#define MPI2_TYPE_H
-
-
-/*******************************************************************************
- * Define MPI2_POINTER if it hasn't already been defined. By default
- * MPI2_POINTER is defined to be a near pointer. MPI2_POINTER can be defined as
- * a far pointer by defining MPI2_POINTER as "far *" before this header file is
- * included.
- */
-#ifndef MPI2_POINTER
-#define MPI2_POINTER     *
-#endif
-
-/* the basic types may have already been included by mpi_type.h */
-#ifndef MPI_TYPE_H
-/*****************************************************************************
-*
-*               Basic Types
-*
-*****************************************************************************/
-
-typedef u8 U8;
-typedef __le16 U16;
-typedef __le32 U32;
-typedef __le64 U64 __attribute__((aligned(4)));
-
-/*****************************************************************************
-*
-*               Pointer Types
-*
-*****************************************************************************/
-
-typedef U8      *PU8;
-typedef U16     *PU16;
-typedef U32     *PU32;
-typedef U64     *PU64;
-
-#endif
-
-#endif
-

drivers/scsi/mpt3sas/Kconfig

@@ -41,15 +41,15 @@
 # USA.
 
 config SCSI_MPT3SAS
-	tristate "LSI MPT Fusion SAS 3.0 Device Driver"
+	tristate "LSI MPT Fusion SAS 3.0 & SAS 2.0 Device Driver"
 	depends on PCI && SCSI
 	select SCSI_SAS_ATTRS
 	select RAID_ATTRS
 	---help---
 	This driver supports PCI-Express SAS 12Gb/s Host Adapters.
 
-config SCSI_MPT3SAS_MAX_SGE
-	int "LSI MPT Fusion Max number of SG Entries (16 - 256)"
+config SCSI_MPT2SAS_MAX_SGE
+	int "LSI MPT Fusion SAS 2.0 Max number of SG Entries (16 - 256)"
 	depends on PCI && SCSI && SCSI_MPT3SAS
 	default "128"
 	range 16 256
@@ -60,8 +60,14 @@ config SCSI_MPT3SAS_MAX_SGE
 	can be 256. However, it may decreased down to 16.  Decreasing this
 	parameter will reduce memory requirements on a per controller instance.
 
-config SCSI_MPT3SAS_LOGGING
-	bool "LSI MPT Fusion logging facility"
+config SCSI_MPT3SAS_MAX_SGE
+	int "LSI MPT Fusion SAS 3.0 Max number of SG Entries (16 - 256)"
 	depends on PCI && SCSI && SCSI_MPT3SAS
+	default "128"
+	range 16 256
 	---help---
-	This turns on a logging facility.
+	This option allows you to specify the maximum number of scatter-
+	gather entries per I/O. The driver default is 128, which matches
+	MAX_PHYS_SEGMENTS in most kernels.  However in SuSE kernels this
+	can be 256. However, it may decreased down to 16.  Decreasing this
+	parameter will reduce memory requirements on a per controller instance.

drivers/scsi/mpt3sas/Makefile

@@ -5,4 +5,5 @@ mpt3sas-y +=  mpt3sas_base.o     \
 		mpt3sas_scsih.o      \
 		mpt3sas_transport.o     \
 		mpt3sas_ctl.o	\
-		mpt3sas_trigger_diag.o
+		mpt3sas_trigger_diag.o \
+		mpt3sas_warpdrive.o

drivers/scsi/mpt3sas/mpt3sas_ctl.h

@@ -50,10 +50,13 @@
 #include <linux/miscdevice.h>
 #endif
 
-
+#ifndef MPT2SAS_MINOR
+#define MPT2SAS_MINOR		(MPT_MINOR + 1)
+#endif
 #ifndef MPT3SAS_MINOR
 #define MPT3SAS_MINOR		(MPT_MINOR + 2)
 #endif
+#define MPT2SAS_DEV_NAME	"mpt2ctl"
 #define MPT3SAS_DEV_NAME	"mpt3ctl"
 #define MPT3_MAGIC_NUMBER	'L'
 #define MPT3_IOCTL_DEFAULT_TIMEOUT (10) /* in seconds */
@@ -138,6 +141,7 @@ struct mpt3_ioctl_pci_info {
 #define MPT2_IOCTL_INTERFACE_FC_IP	(0x02)
 #define MPT2_IOCTL_INTERFACE_SAS	(0x03)
 #define MPT2_IOCTL_INTERFACE_SAS2	(0x04)
+#define MPT2_IOCTL_INTERFACE_SAS2_SSS6200	(0x05)
 #define MPT3_IOCTL_INTERFACE_SAS3	(0x06)
 #define MPT2_IOCTL_VERSION_LENGTH	(32)
 

drivers/scsi/mvsas/mv_init.c

@@ -640,9 +640,9 @@ static void mvs_pci_remove(struct pci_dev *pdev)
 	tasklet_kill(&((struct mvs_prv_info *)sha->lldd_ha)->mv_tasklet);
 #endif
 
+	scsi_remove_host(mvi->shost);
 	sas_unregister_ha(sha);
 	sas_remove_host(mvi->shost);
-	scsi_remove_host(mvi->shost);
 
 	MVS_CHIP_DISP->interrupt_disable(mvi);
 	free_irq(mvi->pdev->irq, sha);

drivers/scsi/pm8001/pm8001_defs.h

@@ -51,6 +51,8 @@ enum chip_flavors {
 	chip_8076,
 	chip_8077,
 	chip_8006,
+	chip_8070,
+	chip_8072
 };
 
 enum phy_speed {