Commit fedc8844 authored by Tony Lindgren's avatar Tony Lindgren

Merge branch 'omap-for-v5.5/droid4' into omap-for-v5.5/dt

parents 830834c4 61978617
...@@ -768,6 +768,7 @@ dtb-$(CONFIG_SOC_AM33XX) += \ ...@@ -768,6 +768,7 @@ dtb-$(CONFIG_SOC_AM33XX) += \
am335x-wega-rdk.dtb \ am335x-wega-rdk.dtb \
am335x-osd3358-sm-red.dtb am335x-osd3358-sm-red.dtb
dtb-$(CONFIG_ARCH_OMAP4) += \ dtb-$(CONFIG_ARCH_OMAP4) += \
omap4-droid-bionic-xt875.dtb \
omap4-droid4-xt894.dtb \ omap4-droid4-xt894.dtb \
omap4-duovero-parlor.dtb \ omap4-duovero-parlor.dtb \
omap4-kc1.dtb \ omap4-kc1.dtb \
......
This diff is collapsed.
// SPDX-License-Identifier: GPL-2.0-only
/dts-v1/;
#include "motorola-mapphone-common.dtsi"
/ {
model = "Motorola Droid Bionic XT875";
compatible = "motorola,droid-bionic", "ti,omap4430", "ti,omap4";
};
This diff is collapsed.
...@@ -474,7 +474,7 @@ wlcore: wlcore@2 { ...@@ -474,7 +474,7 @@ wlcore: wlcore@2 {
compatible = "ti,wl1271"; compatible = "ti,wl1271";
reg = <2>; reg = <2>;
/* gpio_53 with gpmc_ncs3 pad as wakeup */ /* gpio_53 with gpmc_ncs3 pad as wakeup */
interrupts-extended = <&gpio2 21 IRQ_TYPE_EDGE_RISING>, interrupts-extended = <&gpio2 21 IRQ_TYPE_LEVEL_HIGH>,
<&omap4_pmx_core 0x3a>; <&omap4_pmx_core 0x3a>;
interrupt-names = "irq", "wakeup"; interrupt-names = "irq", "wakeup";
ref-clock-frequency = <38400000>; ref-clock-frequency = <38400000>;
......
...@@ -512,7 +512,7 @@ wlcore: wlcore@2 { ...@@ -512,7 +512,7 @@ wlcore: wlcore@2 {
compatible = "ti,wl1281"; compatible = "ti,wl1281";
reg = <2>; reg = <2>;
interrupt-parent = <&gpio1>; interrupt-parent = <&gpio1>;
interrupts = <21 IRQ_TYPE_EDGE_RISING>; /* gpio 53 */ interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* gpio 53 */
ref-clock-frequency = <26000000>; ref-clock-frequency = <26000000>;
tcxo-clock-frequency = <26000000>; tcxo-clock-frequency = <26000000>;
}; };
......
...@@ -69,7 +69,7 @@ wlcore: wlcore@2 { ...@@ -69,7 +69,7 @@ wlcore: wlcore@2 {
compatible = "ti,wl1271"; compatible = "ti,wl1271";
reg = <2>; reg = <2>;
interrupt-parent = <&gpio2>; interrupt-parent = <&gpio2>;
interrupts = <9 IRQ_TYPE_EDGE_RISING>; /* gpio 41 */ interrupts = <9 IRQ_TYPE_LEVEL_HIGH>; /* gpio 41 */
ref-clock-frequency = <38400000>; ref-clock-frequency = <38400000>;
}; };
}; };
...@@ -362,7 +362,7 @@ wlcore: wlcore@2 { ...@@ -362,7 +362,7 @@ wlcore: wlcore@2 {
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&wlcore_irq_pin>; pinctrl-0 = <&wlcore_irq_pin>;
interrupt-parent = <&gpio1>; interrupt-parent = <&gpio1>;
interrupts = <14 IRQ_TYPE_EDGE_RISING>; /* gpio 14 */ interrupts = <14 IRQ_TYPE_LEVEL_HIGH>; /* gpio 14 */
ref-clock-frequency = <26000000>; ref-clock-frequency = <26000000>;
}; };
}; };
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment