Commit ff0c2642 authored by Masanari Iida's avatar Masanari Iida Committed by Jiri Kosina

video: Fix typo in drivers/video

Correct spelling typo in debug messages and comments
within drivers/video.
Signed-off-by: default avatarMasanari Iida <standby24x7@gmail.com>
Signed-off-by: default avatarJiri Kosina <jkosina@suse.cz>
parent f9028317
......@@ -336,8 +336,8 @@ static void arcfb_lcd_update_horiz(struct arcfb_par *par, unsigned int left,
}
/*
* here we start the process of spliting out the fb update into
* individual blocks of pixels. we end up spliting into 64x64 blocks
* here we start the process of splitting out the fb update into
* individual blocks of pixels. we end up splitting into 64x64 blocks
* and finally down to 64x8 pages.
*/
static void arcfb_lcd_update(struct arcfb_par *par, unsigned int dx,
......
......@@ -939,7 +939,7 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev)
* up a splash image.
*/
} else {
/* alocate memory buffer */
/* allocate memory buffer */
ret = atmel_lcdfb_alloc_video_memory(sinfo);
if (ret < 0) {
dev_err(dev, "cannot allocate framebuffer: %d\n", ret);
......
......@@ -863,7 +863,7 @@ static int aty_var_to_crtc(const struct fb_info *info,
if ((xres > 1600) || (yres > 1200)) {
FAIL("MACH64 chips are designed for max 1600x1200\n"
"select anoter resolution.");
"select another resolution.");
}
h_sync_strt = h_disp + var->right_margin;
h_sync_end = h_sync_strt + var->hsync_len;
......
......@@ -2018,7 +2018,7 @@ static void radeon_identify_vram(struct radeonfb_info *rinfo)
if ((rinfo->family == CHIP_FAMILY_RS100) ||
(rinfo->family == CHIP_FAMILY_RS200)) {
/* This is to workaround the asic bug for RMX, some versions
of BIOS dosen't have this register initialized correctly.
of BIOS doesn't have this register initialized correctly.
*/
OUTREGP(CRTC_MORE_CNTL, CRTC_H_CUTOFF_ACTIVE_EN,
~CRTC_H_CUTOFF_ACTIVE_EN);
......
......@@ -58,7 +58,7 @@ static const unsigned short ppi_pins[] = {
*/
static struct bfin_adv7393_fb_par {
/* structure holding blackfin / adv7393 paramters when
/* structure holding blackfin / adv7393 parameters when
screen is blanked */
struct {
u8 Mode; /* ntsc/pal/? */
......
......@@ -1611,7 +1611,7 @@ static void init_vgachip(struct fb_info *info)
/* ext. display controls: ext.adr. wrap */
vga_wcrt(cinfo->regbase, CL_CRT1B, 0x02);
/* Set/Reset registes: - */
/* Set/Reset registers: - */
vga_wgfx(cinfo->regbase, VGA_GFX_SR_VALUE, 0x00);
/* Set/Reset enable: - */
vga_wgfx(cinfo->regbase, VGA_GFX_SR_ENABLE, 0x00);
......
......@@ -717,7 +717,7 @@ int exynos_dp_read_bytes_from_i2c(struct exynos_dp_device *dp,
/*
* If Rx sends defer, Tx sends only reads
* request without sending addres
* request without sending address
*/
if (!defer)
retval = exynos_dp_select_i2c_device(dp,
......
......@@ -104,7 +104,7 @@ static void exynos_mipi_update_cfg(struct mipi_dsim_device *dsim)
/*
* data from Display controller(FIMD) is transferred in video mode
* but in case of command mode, all settigs is updated to registers.
* but in case of command mode, all settings are updated to registers.
*/
exynos_mipi_dsi_stand_by(dsim, 1);
}
......
......@@ -497,7 +497,7 @@ static int i740fb_decode_var(const struct fb_var_screeninfo *var,
mem = vxres * vyres * ((bpp + 1) / 8);
if (mem > info->screen_size) {
dev_err(info->device, "not enough video memory (%d KB requested, %ld KB avaliable)\n",
dev_err(info->device, "not enough video memory (%d KB requested, %ld KB available)\n",
mem >> 10, info->screen_size >> 10);
return -ENOMEM;
}
......@@ -728,7 +728,7 @@ static void vga_protect(struct i740fb_par *par)
i740outreg_mask(par, VGA_SEQ_I, VGA_SEQ_CLOCK_MODE, 0x20, 0x20);
i740inb(par, 0x3DA);
i740outb(par, VGA_ATT_W, 0x00); /* enable pallete access */
i740outb(par, VGA_ATT_W, 0x00); /* enable palette access */
}
static void vga_unprotect(struct i740fb_par *par)
......@@ -737,7 +737,7 @@ static void vga_unprotect(struct i740fb_par *par)
i740outreg_mask(par, VGA_SEQ_I, VGA_SEQ_CLOCK_MODE, 0, 0x20);
i740inb(par, 0x3DA);
i740outb(par, VGA_ATT_W, 0x20); /* disable pallete access */
i740outb(par, VGA_ATT_W, 0x20); /* disable palette access */
}
static int i740fb_set_par(struct fb_info *info)
......
......@@ -189,7 +189,7 @@ struct s3c_fb_vsync {
/**
* struct s3c_fb - overall hardware state of the hardware
* @slock: The spinlock protection for this data sturcture.
* @slock: The spinlock protection for this data sturucture.
* @dev: The device that we bound to, for printing, etc.
* @bus_clk: The clk (hclk) feeding our interface and possibly pixclk.
* @lcd_clk: The clk (sclk) feeding pixclk.
......
......@@ -662,7 +662,7 @@ static void savage_get_default_par(struct savagefb_par *par, struct savage_reg *
vga_out8(0x3c4, 0x18, par);
reg->SR18 = vga_in8(0x3c5, par);
/* Save flat panel expansion regsters. */
/* Save flat panel expansion registers. */
if (par->chip == S3_SAVAGE_MX) {
int i;
......@@ -815,7 +815,7 @@ static void savage_set_default_par(struct savagefb_par *par,
vga_out8(0x3c4, 0x18, par);
vga_out8(0x3c5, reg->SR18, par);
/* Save flat panel expansion regsters. */
/* Save flat panel expansion registers. */
if (par->chip == S3_SAVAGE_MX) {
int i;
......@@ -1318,7 +1318,7 @@ static void savagefb_set_par_int(struct savagefb_par *par, struct savage_reg *r
vga_out8(0x3c4, 0x15, par);
vga_out8(0x3c5, reg->SR15, par);
/* Restore flat panel expansion regsters. */
/* Restore flat panel expansion registers. */
if (par->chip == S3_SAVAGE_MX) {
int i;
......
......@@ -1002,7 +1002,7 @@ static int ufx_ops_ioctl(struct fb_info *info, unsigned int cmd,
/* TODO: Help propose a standard fb.h ioctl to report mmap damage */
if (cmd == UFX_IOCTL_REPORT_DAMAGE) {
/* If we have a damage-aware client, turn fb_defio "off"
* To avoid perf imact of unecessary page fault handling.
* To avoid perf imact of unnecessary page fault handling.
* Done by resetting the delay for this fb_info to a very
* long period. Pages will become writable and stay that way.
* Reset to normal value when all clients have closed this fb.
......@@ -1466,7 +1466,7 @@ static int ufx_read_edid(struct ufx_data *dev, u8 *edid, int edid_len)
/* all FF's in the first 16 bytes indicates nothing is connected */
for (i = 0; i < 16; i++) {
if (edid[i] != 0xFF) {
pr_debug("edid data read succesfully");
pr_debug("edid data read successfully");
return EDID_LENGTH;
}
}
......
......@@ -12,7 +12,7 @@
#include <asm/io.h>
/* XXX This device has a 'dev-comm' property which aparently is
/* XXX This device has a 'dev-comm' property which apparently is
* XXX a pointer into the openfirmware's address space which is
* XXX a shared area the kernel driver can use to keep OBP
* XXX informed about the current resolution setting. The idea
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment