Commit ff0d35e2 authored by Tom Zanussi's avatar Tom Zanussi Committed by Steven Rostedt (VMware)

tracing: Add hist trigger onchange() handler Documentation

Add Documentation for the hist:onchange($var) handler.

Link: http://lkml.kernel.org/r/ab54b7383b265609fda52648a8fbfbd2631a640f.1550100284.git.tom.zanussi@linux.intel.comSigned-off-by: default avatarTom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: default avatarSteven Rostedt (VMware) <rostedt@goodmis.org>
parent dff81f55
......@@ -1869,6 +1869,7 @@ The available handlers are:
- onmatch(matching.event) - invoke action on any addition or update
- onmax(var) - invoke action if var exceeds current max
- onchange(var) - invoke action if var changes
The available actions are:
......@@ -2140,6 +2141,103 @@ The following commonly-used handler.action pairs are available:
<...>-2102 [005] d..4 309.875185: sched_wake_idle_without_ipi: cpu=1
<idle>-0 [001] d..3 309.875200: sched_switch: prev_comm=swapper/1 prev_pid=0 prev_prio=120 prev_state=S ==> next_comm=cyclictest next_pid=2103 next_prio=19
- onchange(var).save(field,.. .)
The 'onchange(var).save(field,...)' hist trigger action is invoked
whenever the value of 'var' associated with a histogram entry
changes.
The end result is that the trace event fields specified as the
onchange.save() params will be saved if 'var' changes for that
hist trigger entry. This allows context from the event that
changed the value to be saved for later reference. When the
histogram is displayed, additional fields displaying the saved
values will be printed.
- onchange(var).snapshot()
The 'onchange(var).snapshot()' hist trigger action is invoked
whenever the value of 'var' associated with a histogram entry
changes.
The end result is that a global snapshot of the trace buffer will
be saved in the tracing/snapshot file if 'var' changes for any
hist trigger entry.
Note that in this case the changed value is a global variable
associated withe current trace instance. The key of the specific
trace event that caused the value to change and the global value
itself are displayed, along with a message stating that a snapshot
has been taken and where to find it. The user can use the key
information displayed to locate the corresponding bucket in the
histogram for even more detail.
As an example the below defines a hist trigger on the tcp_probe
event, keyed on dport. Whenever a tcp_probe event occurs, the
cwnd field is checked against the current value stored in the
$cwnd variable. If the value has changed, a snapshot is taken.
As part of the setup, all the scheduler and tcp events are also
enabled, which are the events that will show up in the snapshot
when it is taken at some point:
# echo 1 > /sys/kernel/debug/tracing/events/sched/enable
# echo 1 > /sys/kernel/debug/tracing/events/tcp/enable
# echo 'hist:keys=dport:cwnd=snd_cwnd: \
onchange($cwnd).save(snd_wnd,srtt,rcv_wnd): \
onchange($cwnd).snapshot()' >> \
/sys/kernel/debug/tracing/events/tcp/tcp_probe/trigger
When the histogram is displayed, for each bucket the tracked value
and the saved values corresponding to that value are displayed
following the rest of the fields.
If a snaphot was taken, there is also a message indicating that,
along with the value and event that triggered the snapshot:
# cat /sys/kernel/debug/tracing/events/tcp/tcp_probe/hist
{ dport: 1521 } hitcount: 8
changed: 10 snd_wnd: 35456 srtt: 154262 rcv_wnd: 42112
{ dport: 80 } hitcount: 23
changed: 10 snd_wnd: 28960 srtt: 19604 rcv_wnd: 29312
{ dport: 9001 } hitcount: 172
changed: 10 snd_wnd: 48384 srtt: 260444 rcv_wnd: 55168
{ dport: 443 } hitcount: 211
changed: 10 snd_wnd: 26960 srtt: 17379 rcv_wnd: 28800
Snapshot taken (see tracing/snapshot). Details:
triggering value { onchange($cwnd) }: 10
triggered by event with key: { dport: 80 }
Totals:
Hits: 414
Entries: 4
Dropped: 0
In the above case, the event that triggered the snapshot has the
key with dport == 80. If you look at the bucket that has 80 as
the key, you'll find the additional values save()'d along with the
changed value for that bucket, which should be the same as the
global changed value (since that was the same value that triggered
the global snapshot).
And finally, looking at the snapshot data should show at or near
the end the event that triggered the snapshot:
# cat /sys/kernel/debug/tracing/snapshot
gnome-shell-1261 [006] dN.3 49.823113: sched_stat_runtime: comm=gnome-shell pid=1261 runtime=49347 [ns] vruntime=1835730389 [ns]
kworker/u16:4-773 [003] d..3 49.823114: sched_switch: prev_comm=kworker/u16:4 prev_pid=773 prev_prio=120 prev_state=R+ ==> next_comm=kworker/3:2 next_pid=135 next_prio=120
gnome-shell-1261 [006] d..3 49.823114: sched_switch: prev_comm=gnome-shell prev_pid=1261 prev_prio=120 prev_state=R+ ==> next_comm=kworker/6:2 next_pid=387 next_prio=120
kworker/3:2-135 [003] d..3 49.823118: sched_stat_runtime: comm=kworker/3:2 pid=135 runtime=5339 [ns] vruntime=17815800388 [ns]
kworker/6:2-387 [006] d..3 49.823120: sched_stat_runtime: comm=kworker/6:2 pid=387 runtime=9594 [ns] vruntime=14589605367 [ns]
kworker/6:2-387 [006] d..3 49.823122: sched_switch: prev_comm=kworker/6:2 prev_pid=387 prev_prio=120 prev_state=R+ ==> next_comm=gnome-shell next_pid=1261 next_prio=120
kworker/3:2-135 [003] d..3 49.823123: sched_switch: prev_comm=kworker/3:2 prev_pid=135 prev_prio=120 prev_state=T ==> next_comm=swapper/3 next_pid=0 next_prio=120
<idle>-0 [004] ..s7 49.823798: tcp_probe: src=10.0.0.10:54326 dest=23.215.104.193:80 mark=0x0 length=32 snd_nxt=0xe3ae2ff5 snd_una=0xe3ae2ecd snd_cwnd=10 ssthresh=2147483647 snd_wnd=28960 srtt=19604 rcv_wnd=29312
3. User space creating a trigger
--------------------------------
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment